On Mon, Oct 18, 2021 at 11:50:05AM +0800, Nick Hu wrote:
> io read/write may cause wrong result because they may read/write data
> from/to register instead of memory. Add 'volatile' to avoid it.
>
> Signed-off-by: Nick Hu
> ---
> arch/riscv/include/asm/io.h | 18 +-
> 1 file
Hi,
On Fri, Oct 1, 2021 at 5:35 PM Bin Meng wrote:
>
> Hi Heinrich,
>
> On Fri, Oct 1, 2021 at 7:37 PM Heinrich Schuchardt
> wrote:
> >
> > Avoid an error like
> >
> > Could not get FIT buffer of 1725952 bytes
> > check CONFIG_SYS_SPL_MALLOC_SIZE
> > No device tree specified
Hello Jaehoon,
I found 'u-boot' is the elf file containing the debug-info (while reading
README.SPL) and found your email below while trying to send an update email.
Yes, I don't have to make u-boot.elf but can just use 'u-boot' like you
showed(I missed the generated file).
The gdb now can
Hi
Did you get an answer I missed ?
There’s active discussion on DTB lifecycle.
>From the Xilinx boards I am aware of, there is a Xilinx primary boot loader
that then loads u-boot SPL and then U-Boot proper.
My understanding is that you can attach the hardware description DTB with
the
Hi Simon
> -Original Message-
> From: Simon Glass
> Sent: Thursday, October 14, 2021 8:40 PM
> To: Gaurav Jain
> Cc: U-Boot Mailing List ; Stefano Babic
> ; Fabio Estevam ; Peng Fan
> ; Priyanka Jain ; Ye Li
> ; Horia Geanta ; Ji Luo
> ; Franck Lenormand ; Silvano Di
> Ninno ; Sahil
Hi,
On 10/19/21 2:01 PM, Chan Kim wrote:
>
> Hello, Jaehoon and all,
>
> I tried setting in menuconfig TOOLS_DEBUG but no change. It's strainge, when
> I add "V=1" in the make command, I can see the commands run during the make.
> The cc command has -g options, a typical command being like
Hi
If you use the second argument to indicate the location of the initrd then
Linux will use device tree information to get the size of the initrd. That
information is probably absent or incorrect.
The initrd= in your command line is thus useless as you task U-boot to load
it.
You may want to
On Tue, Oct 12, 2021 at 12:00:15AM +0300, Ilias Apalodimas wrote:
> The previous patches removed OF_PRIOR_STAGE from the last consumers of the
> Kconfig option. Cleanup any references to it in documentation, code and
> configuration options.
>
> Signed-off-by: Ilias Apalodimas
> Reviewed-by:
On Tue, Oct 12, 2021 at 12:00:14AM +0300, Ilias Apalodimas wrote:
> At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
> introduced, in order to support a DTB handed over by an earlier stage boo
> loader. However we have another option in the Kconfig (OF_BOARD) which has
OF_HOSTFILE is used on sandbox configs only. Although it's pretty
unique and not causing any confusions, we are better of having simpler
config options for the DTB.
So let's replace that with the existing OF_BOARD. U-Boot would then
have only three config options for the DTB origin.
-
On Tue, Oct 19, 2021 at 09:13:07AM +0200, François Ozog wrote:
> Hi
>
> Did you get an answer I missed ?
>
> There’s active discussion on DTB lifecycle.
>
> From the Xilinx boards I am aware of, there is a Xilinx primary boot loader
> that then loads u-boot SPL and then U-Boot proper.
>
> My
On 06.10.21 11:56, Teresa Remmet wrote:
This patchstack contains mainly cleanup for phyCORE-i.MX8MM but
also adds:
* SPI NOR flash support
* clk command
* binman support
Teresa
Teresa Remmet (9):
board: phytec: phycore_imx8mm: Clean up spl
include: configs: phycore_imx8mm: Remove hard
Hi, François
Thank you for the response.
I’m now studying u-boot so it’ll take some time to learn about SystemReady boot.
BTW, inspired by your email, I tried this one. (after tftp of all three files)
=> fdt addr 0x4000
=> fdt chosen 0x4200 0x4211e2a1 // the length of
On Thu, 14 Oct 2021 20:53:04 -0500
Samuel Holland wrote:
Hi,
> From: Icenowy Zheng
>
> The sunxi_egon type used to take no -A argument (because we assume sunxi
> targets are all ARM). However, as Allwinner D1 appears as the first
> RISC-V sunxi target, we need to support -A; in addition, as
Hi,
On 10/19/21 6:59 PM, Chan Kim wrote:
> Hi, François
>
>
>
> Thank you for the response.
>
> I’m now studying u-boot so it’ll take some time to learn about SystemReady
> boot.
>
> BTW, inspired by your email, I tried this one. (after tftp of all three files)
>
>
>
> => fdt addr
On Mon, 18 Oct 2021 09:09:04 -0500
"Alex G." wrote:
Hi,
> On 10/14/21 10:19 PM, Samuel Holland wrote:
> > Some image types (kwbimage and mxsimage) always depend on OpenSSL, so
> > they can only be included in mkimage when TOOLS_LIBCRYPTO is selected.
> > Use Makefile logic to conditionally link
Dear Simon,
In message
<20211018121315.v8.4.Ie78bfbfca0d01d9cba501e127f446ec48e1f7afe@changeid> you
wrote:
>
> The environment variables should be of the form "var=value". Values can
> extend to multiple lines. See the README under 'Environment Variables:'
> for more information and an example.
Hi Marcel,
Am Di., 19. Okt. 2021 um 11:47 Uhr schrieb Marcel Ziswiler
:
>
> Hi Heiko
>
> On Mon, 2021-10-18 at 11:23 +0200, Heiko Thiery wrote:
> > Hi all,
> >
> > I see that in the NXP firmware-imx package different versions of the
> > LPDDR4 train firmware is included but I cannot find a
On 10/19/21 5:49 AM, Andre Przywara wrote:
> On Thu, 14 Oct 2021 20:53:04 -0500
> Samuel Holland wrote:
>
> Hi,
>
>> From: Icenowy Zheng
>>
>> The sunxi_egon type used to take no -A argument (because we assume sunxi
>> targets are all ARM). However, as Allwinner D1 appears as the first
>>
Dear Simon,
In message
you wrote:
>
> Can we just ban + ?
Why? Just because your awk script is a lousy parser?
> In the above, foo\+ gives an unknown escape sequence from the C
> preprocessor, then the whole line is ignored by the script
Really?
-> cat foo.c
#define A ampersand
#define B
Dear Tom,
In message <20211018142404.GR7964@bill-the-cat> you wrote:
>
> > > Perhaps we should just make "+" an illegal character in the variable
> > > name, for consistency?
> >
> > And break backward compatibility? I'd rather see a better
> > definition of the syntax of the environment
Dear Simon,
In message
you wrote:
>
> > Hm... I can't find it right now but did I not also read about other
> > restrictions to variable names, like they must noch begin with '_'
> > when using this new tool?
>
> Yes but I took that out (I think in v6). I'll update the commit message.
Why
Dear Simon,
In message <20211018181322.1181847-1-...@chromium.org> you wrote:
>
> Add a feature that brings in a .env file associated with the board
> config, if present. To use it, create a file board/.env or
> use CONFIG_ENV_SOURCE_FILE to set a filename.
Again, slash missing. This should be
On Tue, Oct 12, 2021 at 12:00:13AM +0300, Ilias Apalodimas wrote:
> At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
> introduced, in order to support a DTB handed over by an earlier stage boo
> loader. However we have another option in the Kconfig (OF_BOARD) which has
On 18/10/21 03:30AM, Kris Chaplin wrote:
> The mt25qu512a supports 4K or 64K sectors, so adding SECT_4K to enable 4K
> sector usage.
>
> Datasheet:
> https://media-www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_512mb_1ce_3v_65nm.pdf
>
> Tested
Hi Simon,
On 19.10.21 17:52, Simon Glass wrote:
Hi Stefano,
On Tue, 19 Oct 2021 at 09:39, Stefano Babic wrote:
Hi Simon,
On 07.10.21 15:43, Simon Glass wrote:
Hi Stefano,
On Thu, 7 Oct 2021 at 04:37, Stefano Babic wrote:
Hi all,
CI stops by building aarch64 without notice, for
Hi Tom,
On Tue, 19 Oct 2021 at 10:44, Tom Rini wrote:
>
> On Tue, Oct 19, 2021 at 10:39:55AM -0600, Simon Glass wrote:
> > Hi Tom,
> >
> > On Tue, 19 Oct 2021 at 10:30, Tom Rini wrote:
> > >
> > > On Tue, Oct 19, 2021 at 10:24:25AM -0600, Simon Glass wrote:
> > > > Hi Wolfgang,
> > > >
> > > >
Hi Marek,
On Tue, 19 Oct 2021 at 10:07, Marek Behún wrote:
>
> On Tue, 19 Oct 2021 09:52:17 -0600
> Simon Glass wrote:
>
> > Hi Marek,
> >
> > On Tue, 19 Oct 2021 at 08:34, Marek Behún wrote:
> > >
> > > On Mon, 18 Oct 2021 12:13:20 -0600
> > > Simon Glass wrote:
> > >
> > > > Add mention of
On 18/10/21 03:26AM, Kris Chaplin wrote:
> Add is25lp512 and is25wp512 devices to spi-nor id table
>
> Tested on Intel n5x hardware with QSPI carrier card
>
> Signed-off-by: Kris Chaplin
> Tested-by: Kris Chaplin
Same comment as before about the Tested-by trailer. Also adding SPI NOR
On Mon, Oct 18, 2021 at 08:29:24PM -0400, Tom Rini wrote:
> On Mon, Oct 18, 2021 at 04:50:33PM -0400, Tom Rini wrote:
> > On Fri, Oct 15, 2021 at 11:42:40AM +0300, Ilias Apalodimas wrote:
> >
> > > OF_HOSTFILE is used on sandbox configs only. Although it's pretty
> > > unique and rarely causes
The PPC 440 support has been removed in commit 98f705c9ce
("powerpc: remove 4xx support") already, so this file is
certainly not required anymore.
Signed-off-by: Thomas Huth
---
doc/README.440-DDR-performance | 90 --
1 file changed, 90 deletions(-)
delete mode
Hello. I would like to send my message to U-boot list.
Hi folks.
I am developing my own USB driver for RPI4 board and ran into a problem - the
VL805 chip raises the HSE error when I'm trying to transfer it to the RUN state.
I configure all the registers of the hardware exactly as the u-boot
On Tue, Oct 19, 2021 at 10:56:26AM +0300, Ilias Apalodimas wrote:
> On Mon, Oct 18, 2021 at 08:29:24PM -0400, Tom Rini wrote:
> > On Mon, Oct 18, 2021 at 04:50:33PM -0400, Tom Rini wrote:
> > > On Fri, Oct 15, 2021 at 11:42:40AM +0300, Ilias Apalodimas wrote:
> > >
> > > > OF_HOSTFILE is used on
In some case, get_info() interface can be NULL, add this check to stop
from crash.
Signed-off-by: schspa
---
disk/part.c | 7 +++
1 file changed, 7 insertions(+)
diff --git a/disk/part.c b/disk/part.c
index a6a8f7052b..7af3240ec7 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -668,6 +668,13
Hi, Jaehoon,
Thanks for the help.
> You can check the debug message in common/image-board.c.
> Did you create ramdisk image the correct format?
To make ramdisk image (I made initramfs which I know is not a real disk image
format
On Tue, Oct 19, 2021 at 02:16:52PM +0300, Ilias Apalodimas wrote:
> On Tue, Oct 19, 2021 at 10:56:26AM +0300, Ilias Apalodimas wrote:
> > On Mon, Oct 18, 2021 at 08:29:24PM -0400, Tom Rini wrote:
> > > On Mon, Oct 18, 2021 at 04:50:33PM -0400, Tom Rini wrote:
> > > > On Fri, Oct 15, 2021 at
On 10/19/21 5:41 AM, Andre Przywara wrote:
> On Mon, 18 Oct 2021 09:09:04 -0500
> "Alex G." wrote:
>
> Hi,
>
>> On 10/14/21 10:19 PM, Samuel Holland wrote:
>>> Some image types (kwbimage and mxsimage) always depend on OpenSSL, so
>>> they can only be included in mkimage when TOOLS_LIBCRYPTO is
On Mon, Oct 18, 2021 at 12:13:18PM -0600, Simon Glass wrote:
> At present U-Boot environment variables, and thus scripts, are defined
> by CONFIG_EXTRA_ENV_SETTINGS. It is painful to add large amounts of text
> to this file and dealing with quoting and newlines is harder than it
> should be. It
On Tue, 19 Oct 2021 08:28:44 -0500
Samuel Holland wrote:
Hi Samuel,
> On 10/19/21 5:41 AM, Andre Przywara wrote:
> > On Mon, 18 Oct 2021 09:09:04 -0500
> > "Alex G." wrote:
> >
> > Hi,
> >
> >> On 10/14/21 10:19 PM, Samuel Holland wrote:
> >>> Some image types (kwbimage and mxsimage)
There are 4 registers (PERIPHID{0-3}) that contain the ID of MCI.
For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control
needs to be enabled for multi block writes (MMC CMD 18).
Signed-off-by: Usama Arif
---
drivers/mmc/arm_pl180_mmci.c | 14 ++
On Tue, 19 Oct 2021 09:52:14 -0600
Simon Glass wrote:
> Hi Marek,
>
> On Tue, 19 Oct 2021 at 08:32, Marek Behún wrote:
> >
> > On Mon, 18 Oct 2021 12:13:19 -0600
> > Simon Glass wrote:
> >
> > > --- /dev/null
> > > +++ b/board/sandbox/sandbox.env
> > > @@ -0,0 +1,25 @@
> > > +stdin=serial
>
On Mon, Oct 11, 2021 at 12:03 AM Bharat Gooty wrote:
>
> + Roman
> Thanks for the review Jagan. Will look and get back to you.
>
> Thanks,
> -Bharat
>
> On Fri, Oct 8, 2021 at 5:57 PM Jagan Teki wrote:
>>
>> On Wed, Aug 25, 2021 at 6:55 PM Bharat Kumar Reddy Gooty
>> wrote:
>> >
>> > From:
On Mon, 18 Oct 2021 12:13:17 -0600
Simon Glass wrote:
> Move this from the README to rST format.
>
> Drop i2cfast since it is obviously obsolete and breaks the formatting.
> Other changes and improvements are in a following patch.
>
> Signed-off-by: Simon Glass
Acked-by: Marek Behún
On Mon, 18 Oct 2021 12:13:16 -0600
Simon Glass wrote:
> This is a complicated set of #defines and it is painful to convert to a
> text file. We can (once pending patches are applied) provide the same
> functionality with bootmethod. Drop this for sandbox to allow conversion
> to a text-file
On Mon, 18 Oct 2021 12:13:22 -0600
Simon Glass wrote:
> +bool env_get_autostart(void)
> +{
> + const char *val = env_get("autostart");
> +
> + return val && !strcmp(val, "yes");
> +}
Why not use env_get_yesno() ?
On Tue, 19 Oct 2021 at 18:36, Tom Rini wrote:
>
> On Tue, Oct 19, 2021 at 06:30:59PM +0300, Ilias Apalodimas wrote:
> > On Tue, 19 Oct 2021 at 17:17, Tom Rini wrote:
> > >
> > > On Tue, Oct 19, 2021 at 08:03:07AM -0600, Simon Glass wrote:
> >
> > [...]
> >
> > > >
> > > > For some reason this
Dear Tom,
In message <20211019140711.GC7964@bill-the-cat> you wrote:
>
> As much as I and others appreciate that you've written the parser here
> in a classic UNIX tool, awk, since a lot of the problems also seem to
> stem from having the parser be able to handle previously valid
> environment
On Tue, 19 Oct 2021 09:52:17 -0600
Simon Glass wrote:
> Hi Marek,
>
> On Tue, 19 Oct 2021 at 08:34, Marek Behún wrote:
> >
> > On Mon, 18 Oct 2021 12:13:20 -0600
> > Simon Glass wrote:
> >
> > > Add mention of this option this it does a similar thing to the text
> > > environment.
> >
> >
Hi Wolfgang,
On Tue, 19 Oct 2021 at 10:05, Wolfgang Denk wrote:
>
> Dear Simon,
>
> In message
> you
> wrote:
> >
> > Well ideally I'd like to avoid Python in this case as it is in the
> > compilation path. I am not sure yet what Wolfgang actually wants,
> > apart from variable names ending
Hi Wolfgang,
On Tue, 19 Oct 2021 at 10:09, Wolfgang Denk wrote:
>
> Dear Simon,
>
> In message
> you
> wrote:
> >
> > I thought you were trying to use + at the end of a variable.
> >
> > I used:
> >
> > fred\+=aaa
> >
> > and got
> >
> > cc1: warning: unknown escape sequence: '\=''
> >
> >
Hi Wolfgang,
On Tue, 19 Oct 2021 at 10:20, Wolfgang Denk wrote:
>
> Dear Simon,
>
> In message
> you
> wrote:
> >
> > But how do we handle this?
> >
> > var+=fred
> >
> > Is this appending to var or assigning to var+ ?
>
> It is assigning to "var+".
er...
> >
> > var++=fred
> >
> > is
On Mon, 18 Oct 2021 12:13:15 -0600
Simon Glass wrote:
> At present testThreadTimeout() assumes that the expected timeout happens
> first when building the section, but it can just as easily happen at the
> top-level image. Update the test to cope with both.
>
> Signed-off-by: Simon Glass
On Mon, 18 Oct 2021 12:13:19 -0600
Simon Glass wrote:
> --- /dev/null
> +++ b/board/sandbox/sandbox.env
> @@ -0,0 +1,25 @@
> +stdin=serial
> +#ifdef CONFIG_SANDBOX_SDL
> +stdin+=,cros-ec-keyb,usbkbd
this was CONFIG_KEYBOARD and now is CONFIG_SANDBOX_SDL, is this okay?
On Mon, 18 Oct 2021 12:13:18 -0600
Simon Glass wrote:
> At present U-Boot environment variables, and thus scripts, are defined
> by CONFIG_EXTRA_ENV_SETTINGS. It is painful to add large amounts of text
> to this file and dealing with quoting and newlines is harder than it
> should be. It would
Hi Tom,
On Tue, 19 Oct 2021 at 08:25, Tom Rini wrote:
>
> On Tue, Oct 19, 2021 at 08:11:08AM -0600, Simon Glass wrote:
> > Hi Tom,
> >
> > On Tue, 19 Oct 2021 at 08:07, Tom Rini wrote:
> > >
> > > On Mon, Oct 18, 2021 at 12:13:18PM -0600, Simon Glass wrote:
> > >
> > > > At present U-Boot
Hi Stefano,
On Tue, 19 Oct 2021 at 09:39, Stefano Babic wrote:
>
> Hi Simon,
>
> On 07.10.21 15:43, Simon Glass wrote:
> > Hi Stefano,
> >
> > On Thu, 7 Oct 2021 at 04:37, Stefano Babic wrote:
> >>
> >> Hi all,
> >>
> >> CI stops by building aarch64 without notice, for reference:
> >>
> >>
Hi Gaurav,
On Tue, 19 Oct 2021 at 00:40, Gaurav Jain wrote:
>
> Hi Simon
>
> > -Original Message-
> > From: Simon Glass
> > Sent: Thursday, October 14, 2021 8:40 PM
> > To: Gaurav Jain
> > Cc: U-Boot Mailing List ; Stefano Babic
> > ; Fabio Estevam ; Peng Fan
> > ; Priyanka Jain ; Ye
On Tue, Oct 19, 2021 at 10:39:55AM -0600, Simon Glass wrote:
> Hi Tom,
>
> On Tue, 19 Oct 2021 at 10:30, Tom Rini wrote:
> >
> > On Tue, Oct 19, 2021 at 10:24:25AM -0600, Simon Glass wrote:
> > > Hi Wolfgang,
> > >
> > > On Tue, 19 Oct 2021 at 10:20, Wolfgang Denk wrote:
> > > >
> > > > Dear
From: schspa
In some case, get_info() interface can be NULL, add this check to stop
from crash.
Signed-off-by: schspa
---
disk/part.c | 7 +++
1 file changed, 7 insertions(+)
diff --git a/disk/part.c b/disk/part.c
index a6a8f7052b..7af3240ec7 100644
--- a/disk/part.c
+++ b/disk/part.c
@@
Hi Ilias,
On Tue, 19 Oct 2021 at 07:07, Ilias Apalodimas
wrote:
>
> OF_HOSTFILE is used on sandbox configs only. Although it's pretty
> unique and not causing any confusions, we are better of having simpler
> config options for the DTB.
>
> So let's replace that with the existing OF_BOARD.
On Mon, 18 Oct 2021 12:13:20 -0600
Simon Glass wrote:
> Add mention of this option this it does a similar thing to the text
> environment.
Strange wording.
> Suggested-by: Rasmus Villemoes
>
> Signed-off-by: Simon Glass
Extra newline.
Other than that
Reviewed-by: Marek Behún
On Tue, Oct 19, 2021 at 06:30:59PM +0300, Ilias Apalodimas wrote:
> On Tue, 19 Oct 2021 at 17:17, Tom Rini wrote:
> >
> > On Tue, Oct 19, 2021 at 08:03:07AM -0600, Simon Glass wrote:
>
> [...]
>
> > >
> > > For some reason this still does not apply for me on -master. Can you
> > > please
Hi Marek,
On Tue, 19 Oct 2021 at 08:32, Marek Behún wrote:
>
> On Mon, 18 Oct 2021 12:13:19 -0600
> Simon Glass wrote:
>
> > --- /dev/null
> > +++ b/board/sandbox/sandbox.env
> > @@ -0,0 +1,25 @@
> > +stdin=serial
> > +#ifdef CONFIG_SANDBOX_SDL
> > +stdin+=,cros-ec-keyb,usbkbd
>
> this was
Hi Marek,
On Tue, 19 Oct 2021 at 08:34, Marek Behún wrote:
>
> On Mon, 18 Oct 2021 12:13:20 -0600
> Simon Glass wrote:
>
> > Add mention of this option this it does a similar thing to the text
> > environment.
>
> Strange wording.
I say that a lot :-)
https://ludwig.guru/s/add+mention
When, for various reasons, a bad FIT image is used where a loadable
image is marked as 0 length, attempt is made for a 0 length allocation and
read of 0 byte read operation.
Instead provide warning in log and skip attempting to do such a load.
Signed-off-by: Nishanth Menon
---
Hi Tom,
On Tue, 19 Oct 2021 at 08:07, Tom Rini wrote:
>
> On Mon, Oct 18, 2021 at 12:13:18PM -0600, Simon Glass wrote:
>
> > At present U-Boot environment variables, and thus scripts, are defined
> > by CONFIG_EXTRA_ENV_SETTINGS. It is painful to add large amounts of text
> > to this file and
On Tue, Oct 19, 2021 at 08:03:07AM -0600, Simon Glass wrote:
> Hi Ilias,
>
> On Tue, 19 Oct 2021 at 07:07, Ilias Apalodimas
> wrote:
> >
> > OF_HOSTFILE is used on sandbox configs only. Although it's pretty
> > unique and not causing any confusions, we are better of having simpler
> > config
On Tue, Oct 19, 2021 at 08:11:08AM -0600, Simon Glass wrote:
> Hi Tom,
>
> On Tue, 19 Oct 2021 at 08:07, Tom Rini wrote:
> >
> > On Mon, Oct 18, 2021 at 12:13:18PM -0600, Simon Glass wrote:
> >
> > > At present U-Boot environment variables, and thus scripts, are defined
> > > by
On Mon, 18 Oct 2021 12:13:21 -0600
Simon Glass wrote:
> Make various updates suggested during review of the rST conversion.
>
> Signed-off-by: Simon Glass
> Suggested-by: Wolfgang Denk
Reviewed-by: Marek Behún
Hi Simon,
On 07.10.21 15:43, Simon Glass wrote:
Hi Stefano,
On Thu, 7 Oct 2021 at 04:37, Stefano Babic wrote:
Hi all,
CI stops by building aarch64 without notice, for reference:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/332319
There is no error, just process is killed.
Hi Ilias, Tom,
On Tue, 19 Oct 2021 at 09:38, Ilias Apalodimas
wrote:
>
> On Tue, 19 Oct 2021 at 18:36, Tom Rini wrote:
> >
> > On Tue, Oct 19, 2021 at 06:30:59PM +0300, Ilias Apalodimas wrote:
> > > On Tue, 19 Oct 2021 at 17:17, Tom Rini wrote:
> > > >
> > > > On Tue, Oct 19, 2021 at
Dear Simon,
In message
you wrote:
>
> I thought you were trying to use + at the end of a variable.
>
> I used:
>
> fred\+=aaa
>
> and got
>
> cc1: warning: unknown escape sequence: '\=''
>
> You can try it yourself by editing sandbox.env in the
> u-boot-dm/env-working tree.
Hmmm...
-> cat
Dear Simon,
In message
you wrote:
>
> But how do we handle this?
>
> var+=fred
>
> Is this appending to var or assigning to var+ ?
It is assigning to "var+".
>
> var++=fred
>
> is unambiguous but very confusing. I think it would be better to disallow +
It's neither unambiguous nor confusing.
Hi,
On Tue, 19 Oct 2021 at 07:17, Samuel Holland wrote:
>
> On 10/19/21 5:49 AM, Andre Przywara wrote:
> > On Thu, 14 Oct 2021 20:53:04 -0500
> > Samuel Holland wrote:
> >
> > Hi,
> >
> >> From: Icenowy Zheng
> >>
> >> The sunxi_egon type used to take no -A argument (because we assume sunxi
>
Hi Wolfgang,
On Tue, 19 Oct 2021 at 04:46, Wolfgang Denk wrote:
>
> Dear Simon,
>
> In message
> you
> wrote:
> >
> > Can we just ban + ?
>
> Why? Just because your awk script is a lousy parser?
>
> > In the above, foo\+ gives an unknown escape sequence from the C
> > preprocessor, then the
On 10/19/21 15:35, zhaohui.shi wrote:
From: schspa
In some case, get_info() interface can be NULL, add this check to stop
from crash.
Thank you for reviewing the partition driver code.
There seems to be no driver missing a get_info implementation. Where did
you run into a problem?
Why
Hi Marek,
On Mon, 18 Oct 2021 at 18:50, Marek Behún wrote:
>
> > Reviewed-by: Simon Glass
>
> Simon, thanks. Will you be taking this through your tree or should I
> change delegate to Tom?
I see it in my queue so I'll pick it up.
Regards,
Simon
With current implementation we are seeing write issues at low frequencies
below 15Mhz. Make below changes to fix the issue.
1. Remove dummy genfifo entry in zynqmp_qspi_chipselect() which was
incorrectly added in the past
2. Enable and poll for TX_FIFO_Empty after Tx data is filled in FIFO in
On Tue, 19 Oct 2021 at 08:17, Tom Rini wrote:
>
> On Tue, Oct 19, 2021 at 08:03:07AM -0600, Simon Glass wrote:
> > Hi Ilias,
> >
> > On Tue, 19 Oct 2021 at 07:07, Ilias Apalodimas
> > wrote:
> > >
> > > OF_HOSTFILE is used on sandbox configs only. Although it's pretty
> > > unique and not
On Tue, 19 Oct 2021 at 17:17, Tom Rini wrote:
>
> On Tue, Oct 19, 2021 at 08:03:07AM -0600, Simon Glass wrote:
[...]
> >
> > For some reason this still does not apply for me on -master. Can you
> > please confirm the hash you are using?
>
> The hunk for scripts/Makefile.spl still fails (it
Dear Simon,
In message
you wrote:
>
> Well ideally I'd like to avoid Python in this case as it is in the
> compilation path. I am not sure yet what Wolfgang actually wants,
> apart from variable names ending with + which I would like to
> disallow.
>
> So if we can clearly understand the goal,
On Tue, Oct 19, 2021 at 10:24:25AM -0600, Simon Glass wrote:
> Hi Wolfgang,
>
> On Tue, 19 Oct 2021 at 10:20, Wolfgang Denk wrote:
> >
> > Dear Simon,
> >
> > In message
> > you
> > wrote:
> > >
> > > But how do we handle this?
> > >
> > > var+=fred
> > >
> > > Is this appending to var or
Hi Tom,
On Tue, 19 Oct 2021 at 10:30, Tom Rini wrote:
>
> On Tue, Oct 19, 2021 at 10:24:25AM -0600, Simon Glass wrote:
> > Hi Wolfgang,
> >
> > On Tue, 19 Oct 2021 at 10:20, Wolfgang Denk wrote:
> > >
> > > Dear Simon,
> > >
> > > In message
> > > you
> > > wrote:
> > > >
> > > > But how do
Hi,
On 10/19/21 9:31 PM, Chan Kim wrote:
> Hi, Jaehoon,
>
> Thanks for the help.
>
>> You can check the debug message in common/image-board.c.
>> Did you create ramdisk image the correct format?
>
> To make ramdisk image (I made initramfs which I know is not a real disk image
> format
>
On Tue, Oct 12, 2021 at 07:40:29PM -0500, Samuel Holland wrote:
> commit 6bf6d81c1112 ("clk: fixed_rate: add dummy enable() function")
> implemented .enable, so fixed rate clocks can be used where drivers
> might call clk_enable(). Implement the .disable op for the same reason;
> some drivers,
For the symbols which are both hard-coded as enabled and used, move to
Kconfig. The rest of the CONFIG_YAFFS namespace is unselected anywhere,
so we leave it as is.
Signed-off-by: Tom Rini
---
fs/yaffs2/Kconfig | 12
fs/yaffs2/Makefile | 4
2 files changed, 12
Most Allwinner sunxi SoCs have separate boot ROMs in non-secure and
secure mode. The "non-secure" or "normal" boot ROM (NBROM) uses the
existing sunxi_egon image type. The secure boot ROM (SBROM) uses a
completely different image type, known as TOC0.
A TOC0 image is composed of a header and two
Move this from the README to rST format.
Drop i2cfast since it is obviously obsolete and breaks the formatting.
Other changes and improvements are in a following patch.
Signed-off-by: Simon Glass
Acked-by: Marek Behún
---
(no changes since v6)
Changes in v6:
- Move all updates to a separate
Use a text file for the environment instead of the #define settings.
Signed-off-by: Simon Glass
Reviewed-by: Marek Behún
---
(no changes since v3)
Changes in v3:
- Add new patch to use a text-based environment for sandbox
board/sandbox/sandbox.env | 25 +
One barrier to completing the 7-year-long Kconfig migration is that
the default environment is implemented using ad-hoc CONFIG options.
At present U-Boot environment variables, and thus scripts, are defined
by CONFIG_EXTRA_ENV_SETTINGS.
It is not really feasible to move the environment to Kconfig
One barrier to completing the 7-year-long Kconfig migration is that
the default environment is implemented using ad-hoc CONFIG options.
At present U-Boot environment variables, and thus scripts, are defined
by CONFIG_EXTRA_ENV_SETTINGS.
It is not really feasible to move the environment to Kconfig
This is a complicated set of #defines and it is painful to convert to a
text file. We can (once pending patches are applied) provide the same
functionality with bootmethod. Drop this for sandbox to allow conversion
to a text-file environment.
Signed-off-by: Simon Glass
Reviewed-by: Marek Behún
Move this from a hard-coded define in config.mk to Kconfig.
Signed-off-by: Tom Rini
---
arch/sandbox/Kconfig | 3 +++
arch/sandbox/config.mk | 1 -
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig
index f83282d9d56a..7606469c94ec 100644
Now that mkimage can generate TOC0 images, and the SPL can interpret
them, hook up the build infrastructure so the user can choose which
image type to build. Since the absolute load address is stored in the
TOC0 header, that information must be passed to mkimage.
Signed-off-by: Samuel Holland
Some image types (kwbimage and mxsimage) always depend on OpenSSL, so
they can only be included in mkimage when TOOLS_LIBCRYPTO is selected.
Use Makefile logic to conditionally link the files.
Signed-off-by: Samuel Holland
---
Changes in v4:
- Do not select TOOLS_LIBCRYPTO anywhere
Changes in
This series adds support for the TOC0 image format used by the Allwinner
secure boot ROM (SBROM). This series has been tested on the following
SoCs/boards, with the eFuse burnt to enable secure mode:
- A50: Ainol Q88 Tablet
- A64: Pine A64 Plus
- H5: Orange Pi Zero Plus
- H6: Pine H64 Model B
SPL uses the image header to detect the boot device and to find the
offset of the next U-Boot stage. Since this information is stored
differently in the eGON and TOC0 image headers, add code to find the
correct value based on the image type currently in use.
Signed-off-by: Samuel Holland
---
The AST2600 SRAM has been extended to 88KB since A1
chip revision. This patch updates the SRAM size to
offer more space for early stack/heap use.
Signed-off-by: Chia-Wei Wang
---
arch/arm/include/asm/arch-aspeed/platform.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
This patch series intends to provide a secure boot chain from SPL to Linux
kernel
based on the hash and signature verification of FIT image paradigm.
To improve the performance and save code size (SPL is limited to 64KB due to
HW-RoT),
the drviers of two HW crypto engine HACE and ACRY are also
Fix inconsistent function parameter name of the hash algorithm.
Signed-off-by: Chia-Wei Wang
Fixes: 92055e138f2 ("image: Drop if/elseif hash selection in calculate_hash()")
---
common/image-fit.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/common/image-fit.c
1 - 100 of 140 matches
Mail list logo