On Thursday 11 December 2008, Ilya Yanok wrote:
> Include header for min_t definition instead of
> providing our own one. Removes warnings in case of OneNAND support
> enabled.
>
> Although I thinks it's a bit silly to include
> just for min_t...
>
> Signed-off-by: Ilya Yanok <[EMAIL PROTECTED]>
Include header for min_t definition instead of
providing our own one. Removes warnings in case of OneNAND support
enabled.
Although I thinks it's a bit silly to include
just for min_t...
Signed-off-by: Ilya Yanok <[EMAIL PROTECTED]>
---
fs/jffs2/jffs2_1pass.c |6 +-
1 files changed, 1
Hi Stefan,
Stefan Roese wrote:
> After this patch is now applied to the main u-boot repo, I get the
> following warning when compiling my new board with OneNAND & JFFS2
> support:
>
> [EMAIL PROTECTED] u-boot (vcth-onenand-ubi-ver3)]$ make -s -j5
> jffs2_1pass.c:1411:1: warning: "min_t" redefined
A forward port of the last version to work with the newer smc911x driver.
A bunch of simple functions/defines had to be split out of the smc911x
driver to avoid ugly code duplication in the eeprom programmer.
I only have a board with a LAN9218 part on it, so that is the only one
I've tested. But
Dear Richard Retanubun,
In message <[EMAIL PROTECTED]> you wrote:
>
> I am trying to limit the amount of memory needed to load and boot a linux
> kernel (2.6.26)
> to do this I loaded my fdt at address 0x20_ and uImage at 0x_30_
>
> When I run bootm, I both the kernel and fdt passed the
Ben Warren wrote:
> Andre Schwarz wrote:
>> Ben,
>>
>> after cloning the latest u-boot git I can see that you've added this
>> inside the mvBC-P board setup :
>>
>> int board_eth_init(bd_t *bis)
>> {
>> cpu_eth_init(bis); /* Built in FEC comes first */
>> return pci_eth_init(bis);
>> }
>>
>
Hi,
I am using u-boot version 2008.10 + git commit
13d36ec849785453953d00220b2c7dc66644a3c2
The board is a custom MPC8360E, similar to MPC8360EMDS from freescale.
My DDR-SDRAM is at address 0x0 - 0x1FFF
I am trying to limit the amount of memory needed to load and boot a linux
kernel (2.6.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[EMAIL PROTECTED]>
diff --git a/Makefile b/Makefile
index 2ac8141..0e31697 100644
--- a/Makefile
+++ b/Makefile
@@ -2586,6 +2586,7 @@ at91sam9260ek_nandflash_config \
at91sam9260ek_dataflash_cs0_config \
at91sam9260ek_dataflash_cs1_config \
at91s
Hello Michael,
2008/12/10 Michael Trimarchi <[EMAIL PROTECTED]>:
> From 1662c619f3b082f60ed8367ec245f36cb33a7ea7 Mon Sep 17 00:00:00 2001
> From: michael <[EMAIL PROTECTED]>
> Date: Wed, 10 Dec 2008 17:55:19 +0100
> Subject: [PATCH] Fix EHCI usb. I start to test on a
> IXP465 board and I find som
Hello Nicholas,
The commit mentioned in the subject cause these error messages here
during make at91sam9261ek_config:
These are my steps:
$ export BUILD_DIR=/tmp/build
$ rm -rf /tmp/build
$ make at91sam9261ek_config
/bin/bash: line 7: /tmp/build/include/config.h: No such file or directory
... wit
Some images can be quite large, so add an option to compress the image data
with gzip in the U-Boot image. Then at runtime, the board can decompress it
with the normal zlib functions.
Signed-off-by: Mike Frysinger <[EMAIL PROTECTED]>
---
v3
- fix copyright
- free buffers on error
On Wednesday 10 December 2008 14:57:27 Wolfgang Denk wrote:
> In message ... you wrote:
> > diff --git a/tools/easylogo/easylogo.c b/tools/easylogo/easylogo.c
> > index 00a1e4e..c7e146f 100644
> > --- a/tools/easylogo/easylogo.c
> > +++ b/tools/easylogo/easylogo.c
> > @@ -2,16 +2,20 @@
> > ** Easy
Dear "mike xu",
In message <[EMAIL PROTECTED]> you wrote:
>
> I'd like to assign some kernel parameters via bootm cmd, but its failed.
I guess you didn't bother to read the documentation, or did you?
> For example, I'de like to pass the below parameters for the kernel:
> root=/dev/mtdblock0 r
Dear Mike Frysinger,
In message <[EMAIL PROTECTED]> you wrote:
> Some images can be quite large, so add an option to compress the image data
> with gzip in the U-Boot image. Then at runtime, the board can decompress it
> with the normal zlib functions.
>
> Signed-off-by: Mike Frysinger <[EMAIL P
Some images can be quite large, so add an option to compress the image data
with gzip in the U-Boot image. Then at runtime, the board can decompress it
with the normal zlib functions.
Signed-off-by: Mike Frysinger <[EMAIL PROTECTED]>
---
v2:
- add error checking
tools/easylogo/easylogo.
On Wednesday 10 December 2008 05:58:08 Wolfgang Denk wrote:
> In message <[EMAIL PROTECTED]> you wrote:
> > The errors that I see are now slightly different. It is complaining that
> > endian.h and byteswap.h don't exist - and that appears to be correct for
> > the system that I have. The error r
On Wednesday 10 December 2008 03:24:08 Wolfgang Denk wrote:
> In message <...> you wrote:
> > While the doc/README.NetConsole does have a snippet for people to create
> > their own netcat script, it's a lot easier to make a simple dedicated
> > script and tell people to use it.
>
> Could you please
Andre Schwarz wrote:
> Ben,
>
> after cloning the latest u-boot git I can see that you've added this
> inside the mvBC-P board setup :
>
> int board_eth_init(bd_t *bis)
> {
> cpu_eth_init(bis); /* Built in FEC comes first */
> return pci_eth_init(bis);
> }
>
> Are you aware that there's no
On Wed, Dec 10, 2008 at 11:37:10AM -0500, Fahd Abidi wrote:
> I am relatively new to uboot development and was wondering if someone
> can give me some pointers. I am trying to configure uboot to bootup from
> NAND on CS0 on an MPC8536 platform.
This isn't yet supported, at least in mainline (the
On Wed, Dec 10, 2008 at 11:41:11AM +0100, Stefan Roese wrote:
> +void *board_flash_read_memcpy(void *__to, __const__ void *__from, int n);
> +
> +#if defined(CONFIG_FLASH_NOT_MEM_MAPPED)
> +static inline int flash_read(void *__to, __const__ void *__from, int n)
__const__? The other underscores se
Hello,
I am relatively new to uboot development and was wondering if someone
can give me some pointers. I am trying to configure uboot to bootup from
NAND on CS0 on an MPC8536 platform. I am trying to disable the FLASH CFI
driver (No NOR flash on the board ) and add support for the FSM NAND
flash
Hi,
I'd like to assign some kernel parameters via bootm cmd, but its failed.
For example, I'de like to pass the below parameters for the kernel:
root=/dev/mtdblock0 ro rootfstype=jffs2
Could someone show me how I can pass them into kernel? Thanks in advance!
The flash on my board couldn't be ov
>From 1662c619f3b082f60ed8367ec245f36cb33a7ea7 Mon Sep 17 00:00:00 2001
From: michael <[EMAIL PROTECTED]>
Date: Wed, 10 Dec 2008 17:55:19 +0100
Subject: [PATCH] Fix EHCI usb. I start to test on a
IXP465 board and I find some errors in the code. This
patch fix:
- descriptor initizialization (conf
Hi,
Remy Bohmer wrote:
> Hello Michael,
>
> I already have those patches (V2) in the u-boot-usb tree, next branch.
> Can you please rebase these patches on top of that tree, or at least
> describe what you changed?
>
> Kind Regards,
>
> Remy
>
I'll prepare another patch with various fixes. I wil
Fix EHCI usb. I start to test on a
IXP465 board and I find some errors in the code. This
patch fix:
- descriptor initizialization (config, interface and endpoint
must be one next-to the other when the USB_DT_CONFIG message
is send.
- FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_B
The following changes since commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae:
Ben Warren (1):
Fix compile error in building MBX860T.
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
Matthias Fuchs (3):
ppc4xx: Update TEXT_BASE for CPCI405 bo
Hello Michael,
I already have those patches (V2) in the u-boot-usb tree, next branch.
Can you please rebase these patches on top of that tree, or at least
describe what you changed?
Kind Regards,
Remy
2008/12/10 Michael Trimarchi <[EMAIL PROTECTED]>:
> Prepare USB layer for support ehci
>
> Si
Support bootdelay=0 in abortboot for the CONFIG_AUTOBOOT_KEYED case
similar to the CONFIG_ZERO_BOOTDELAY_CHECK support for the
!CONFIG_AUTOBOOT_KEYED case.
Do this by reversing the loop so we do atleast one iteration before
checking for timeout.
Signed-off-by: Peter Korsgaard <[EMAIL PROTECTED]>
Add USB ehci freescale support
Signed-off-by: Michael Trimarchi <[EMAIL PROTECTED]>
---
drivers/usb/Makefile |1 +
drivers/usb/usb_ehci_fsl.c | 99
drivers/usb/usb_ehci_fsl.h | 86 ++
3 files changed,
USB ehci core support
Signed-off-by: Michael Trimarchi <[EMAIL PROTECTED]>
---
drivers/usb/Makefile|1 +
drivers/usb/usb_ehci.h | 167 +++
drivers/usb/usb_ehci_core.c | 661 +++
drivers/usb/usb_ehci_core.h | 29 ++
4 files chan
Prepare USB layer for support ehci
Signed-off-by: Michael Trimarchi <[EMAIL PROTECTED]>
---
common/cmd_usb.c |2 +-
common/usb.c |2 +-
include/usb.h | 19 +++
include/usb_defs.h | 10 ++
4 files changed, 23 insertions(+), 10 deletions(-)
diff --
Hi Wolfgang,
please pull U-Boot/MIPS repository to pick up the following changes.
Thanks in advance,
Shinya
---
The following changes since commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae:
Ben Warren (1):
Fix compile error in building MBX860T.
are available in the git repository a
Cleanup usb storage
Signed-off-by: Michael Trimarchi <[EMAIL PROTECTED]>
---
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 94f659f..973d82f 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -63,9 +63,9 @@
#undef BBB_XPORT_TRACE
#ifdef USB_STOR_DEBUG
-#define USB
Dear Wolfgang,
Please pull u-boot-sh master branch.
Best regards,
Nobuhiro
The following changes since commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae:
Ben Warren (1):
Fix compile error in building MBX860T.
are available in the git repository at:
git://git.denx.de/u-boot-sh.git ma
This patch disables EEPROM wrtie access by default on PMC440 board.
Signed-off-by: Matthias Fuchs <[EMAIL PROTECTED]>
---
board/esd/pmc440/pmc440.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index 4d81c33..382410
Signed-off-by: Matthias Fuchs <[EMAIL PROTECTED]>
---
board/esd/pmc440/pmc440.c | 22 ++
1 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index 8563d7d..4d81c33 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/b
This patch fixes building U-Boot for CPCI405 boards.
Signed-off-by: Matthias Fuchs <[EMAIL PROTECTED]>
---
Makefile|5 +
board/esd/cpci405/config.mk |6 +-
include/configs/CPCI405.h |6 +++---
3 files changed, 5 insertions(+), 12 deletions(-)
diff --git
Hello all,
I'm wondering if in theory it's possible to create a bootable
pen-drive with U-Boot on it to allow the following:
1st) Take a PPC Mac Mini for instance that runs OpenFirmware.
2nd) Boot it from the USB Pen-drive
3rd) U-Boot will be loaded
4th) U-Boot would offer the po
Hi Ilya,
On Thursday 13 November 2008, Ilya Yanok wrote:
> Rewrites jffs2_1pass_build_lists() function in style of Linux's
> jffs2_scan_medium() and jffs2_scan_eraseblock().
> This includes:
> - Caching flash acceses
> - Smart dealing with free space
After this patch is now applied to the main
Hello all,
I'm wondering if in theory it's possible to create a bootable
pen-drive with U-Boot on it to allow the following:
1st) Take a PPC Mac Mini for instance that runs OpenFirmware.
2nd) Boot it from the USB Pen-drive
3rd) U-Boot will be loaded
4th) U-Boot would offer the pos
Hi Matthias,
On Wednesday 10 December 2008, Matthias Fuchs wrote:
> This patch fixes building U-Boot for CPCI405 boards.
I have a small improvement suggestion below:
> Signed-off-by: Matthias Fuchs <[EMAIL PROTECTED]>
> ---
> Makefile|5 +
> board/esd/cpci405/config.
This patch fixes building U-Boot for CPCI405 boards.
Signed-off-by: Matthias Fuchs <[EMAIL PROTECTED]>
---
Makefile|5 +
board/esd/cpci405/config.mk |6 +-
include/configs/CPCI405.h |4 ++--
3 files changed, 4 insertions(+), 11 deletions(-)
diff --git a/
Hi Wolfgang,
this is an updated pull-request for the UBI repository. I added the latest 2
small
patches.
The following changes since commit 13d36ec849785453953d00220b2c7dc66644a3c2:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-at91
are available in the git rep
Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
failing malloc().
Thanks to Michael Lawnick for pointing this out.
Signed-off-by: Stefan Roese <[EMAIL PROTECTED]>
---
v2:
- Slightly improved version
drivers/mtd/ubi/build.c |5 +++--
1 files changed, 3 insertions(+),
Graeme Russ schrieb:
> Hi All,
>
> I had some 'fun' with weak functions a little while ago, and I'm wondering
> if maybe we should fix up a few inconsistencies...
>
> Andre Schwarz wrote:
>
>> Heiko Schocher schrieb:
>>
>>> Hello Andre,
>>>
>>> Andre Schwarz wrote:
>>>
>>>
Al
Hi All,
I had some 'fun' with weak functions a little while ago, and I'm wondering
if maybe we should fix up a few inconsistencies...
Andre Schwarz wrote:
> Heiko Schocher schrieb:
>> Hello Andre,
>>
>> Andre Schwarz wrote:
>>
>>> All,
>>>
>>> can someone tell me why the board specific functio
Dear Andy,
In message <[EMAIL PROTECTED]> you wrote:
>
> The errors that I see are now slightly different. It is complaining that
> endian.h and byteswap.h don't exist - and that appears to be correct for the
> system that I have. The error regarding 'uintptr_t' has been fixed based on
> the pa
Ben,
after cloning the latest u-boot git I can see that you've added this
inside the mvBC-P board setup :
int board_eth_init(bd_t *bis)
{
cpu_eth_init(bis); /* Built in FEC comes first */
return pci_eth_init(bis);
}
Are you aware that there's no PHY connected and the ETH-Pins are used
ot
This patch adds the CONFIG_FLASH_NOT_MEM_MAPPED define which can be
used on boards where the NOR FLASH is not memory-mapped and
special accessor functions are needed to access the NOR FLASH.
This affects the memory commands (cmd_mem.c) and the environment
(env_flash.c).
Boards using CONFIG_FLASH_N
Heiko Schocher schrieb:
> Hello Andre,
>
> Andre Schwarz wrote:
>
>> All,
>>
>> can someone tell me why the board specific function "void
>> show_boot_progress(int arg)"
>> is no longer called (at least on MPC5200).
>>
>> Of course this line is present in the board config :
>>
>> #define CONFIG_
Dear Wolfgang,
> > What version of host gcc is needed for building the tools such as
> > mkimage.exe? My embedded Linux development environment is Cygwin
(1.3.22)
> > based and includes gcc 3.4.4 which gives compiler errors for versions of
> > U-Boot 1.3.3 and later.
>
> Do you also get these er
With this patch we set the type back to NONE upon failing UBI partition
initialization. Otherwise further calls to the UBI subsystem would try
to really access the non-existing UBI partition.
Thanks to Michael Lawnick for pointing this out.
Signed-off-by: Stefan Roese <[EMAIL PROTECTED]>
---
com
Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
failing malloc().
Thanks to Michael Lawnick for pointing this out.
Signed-off-by: Stefan Roese <[EMAIL PROTECTED]>
---
drivers/mtd/ubi/build.c | 16 +++-
1 files changed, 11 insertions(+), 5 deletions(-)
diff
Hi Pieter,
On Wednesday 10 December 2008, Pieter Voorthuijsen wrote:
> This patch looks good to me.
OK, I'll push it upstream then.
> In my opinion we don't need PCI either, when
> we need it for debugging, we can enable it...
And then you will find out, that it probably won't fit into the 256
Hi Stefan,
This patch looks good to me. In my opinion we don't need PCI either, when we
need it for debugging, we can enable it...
Best regards, Pieter
> -Original Message-
> From: Stefan Roese [mailto:[EMAIL PROTECTED]
> Sent: dinsdag 9 december 2008 20:09
> To: u-boot@lists.denx.de
>
Hi Wolfgang,
please pull these changes.
Thanks,
Michal
The following changes since commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97:
Jerry Van Baren (1):
libfdt: Fix redefined uintptr_t warning for USE_HOSTCC
are available in the git repository at:
git://www.denx.de/git/u-boot-micr
Dear "Andy Pont",
In message <[EMAIL PROTECTED]> you wrote:
>
> What version of host gcc is needed for building the tools such as
> mkimage.exe? My embedded Linux development environment is Cygwin (1.3.22)
> based and includes gcc 3.4.4 which gives compiler errors for versions of
> U-Boot 1.3.3
Dear Ben Warren,
In message <[EMAIL PROTECTED]> you wrote:
> Signed-off-by: Ben Warren <[EMAIL PROTECTED]>
> ---
> cpu/mpc8xx/cpu.c |2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang D
Dear Mike Frysinger,
In message <[EMAIL PROTECTED]> you wrote:
> Some images can be quite large, so add an option to compress the image data
> with gzip in the U-Boot image. Then at runtime, the board can decompress it
> with the normal zlib functions.
Good idea.
> + FILE *gz;
> +
>
Dear Mike Frysinger,
In message <[EMAIL PROTECTED]> you wrote:
> While the doc/README.NetConsole does have a snippet for people to create
> their own netcat script, it's a lot easier to make a simple dedicated script
> and tell people to use it.
Could you please restrict the line length to some 7
Hello,
What version of host gcc is needed for building the tools such as
mkimage.exe? My embedded Linux development environment is Cygwin (1.3.22)
based and includes gcc 3.4.4 which gives compiler errors for versions of
U-Boot 1.3.3 and later.
make[1]: Entering directory
`/home/andy/bootloaders/
Dear Mike Frysinger,
In message <[EMAIL PROTECTED]> you wrote:
> From: Sonic Zhang <[EMAIL PROTECTED]>
>
> The FAT file system driver should also handle FAT on SATA devices.
>
> Signed-off-by: Sonic Zhang <[EMAIL PROTECTED]>
> Signed-off-by: Mike Frysinger <[EMAIL PROTECTED]>
> ---
> fs/fat/fat
Hi Wolfgang,
I am going to do some test today and send you pull request.
Thanks,
Michal
Wolfgang Denk wrote:
> Dear Michal Simek,
>
> In message <[EMAIL PROTECTED]> you wrote:
>> here are 4 microblaze patches. All patches are in microblaze custodian
>> repository - master branch.
>
> But you d
63 matches
Mail list logo