Hello Marek
ALWAYS CC U-BOOT ML
Thank you for your answer
My SOC (Marvells Armada Controller) uses a bootrom code to copy to
initialize the DRAM and to copy the u-boot image. so the entire DRAM init
and copy sequence in u-boot is redundant.
I see. I know about this soc's bootrom.
hi Manjunath,
On Thu Feb 02, 2012 at 07:23:20PM +0530, Manjunath Hadli wrote:
Move the clock related function from cpu.c to new file
speed.c. Eliminate volatile keyword usage which made no
justification and also to keep checkpatch.pl happy. Replace
REG instructions by readl.
Signed-off-by:
On 03/02/2012 08:25, Dirk Behme wrote:
Hi,
Hi Dirk,
on i.MX6 devices, e.g. ARM2 or SabreLite, the ROM boot loader copies the
U-Boot image from the boot device, e.g. the SD card, to the main memory.
This does mean that U-Boot is started in RAM.
The same happens on MX5 and on several
On 02/02/2012 17:32, Mike Frysinger wrote:
to be clear, i'm not trying to hoard patches or anything ...
Do not worry, I have never thought this... ;-)
i just can't see there being a hard requirement here between the
two sets.
Agree, and the patches should be merged by the maintainer
On 03.02.2012 09:51, Stefano Babic wrote:
On 03/02/2012 08:25, Dirk Behme wrote:
Hi,
Hi Dirk,
on i.MX6 devices, e.g. ARM2 or SabreLite, the ROM boot loader copies the
U-Boot image from the boot device, e.g. the SD card, to the main memory.
This does mean that U-Boot is started in RAM.
Hi Fabio,
Very good, Robert! I tested your patch and it fixes the reboot issue
on my mx28evk.
You're most welcome! I'm glad to hear it fixes your problem too.
Also checked in the MX28 Reference Manual about the fact that
hw_clkctrl_frac0 can only be accessed as bytes.
It's easy to
You can write:
writeb(19 , clkctrl_regs-hw_clkctrl_frac0);
Yes, for the first byte I can (and do), but the three higher bytes
would get ugly with this method:
writeb(bitset 8, (unit8_t*)clkctrl_regs-hw_clkctrl_frac0 + 1);
___
U-Boot mailing list
Hi,
you're only writing data to the register, not clearing them. So maybe some
bits
remain set?
The assignment will work here. There're only 8 bits, of which 6 are the
fractional
divider, one is de read-only stable indicator (unaffected by writes) and the
last
one is the gating bit.
The
Hi,
this is how the imx-bootlets does it though. It's likely that FSL wants the
PLL0
to run from XTAL when doing power configuration?
I was using the FLS bootlets as a reference too, but I have noticed a number of
'mistakes' in that code. For example:
- Busy-indicators aren't considered when
On 03/02/2012 11:18, Dirk Behme wrote:
Ok, understood :) Do you have any pointers or hints how to implement a
board specific relocation skip? Just in case somebody wants us to
implement this for a specific i.MX6 board ...
Not really - I think you have to dig into the git history, when we
Hi,
I was thinking of this and we might need to introduce either special accessor
for this particular register or rework include/regs-common.h and introduce
mx28_reg_8 (which I don't think is a good idea).
I tend to agree with you about introducing mx28_reg_8. It doesn't 'feel right'
because
On Friday 03 February 2012 06:00:57 Stefano Babic wrote:
On 03/02/2012 11:18, Dirk Behme wrote:
Ok, understood :) Do you have any pointers or hints how to implement a
board specific relocation skip? Just in case somebody wants us to
implement this for a specific i.MX6 board ...
Not
On Friday 03 February 2012 02:30:48 Nobuhiro Iwamatsu wrote:
@@ -564,8 +569,10 @@ static int sh_eth_bb_init(struct bb_miiphy_bus *bus)
static int sh_eth_bb_mdio_active(struct bb_miiphy_bus *bus)
{
+ int port;
struct sh_eth_dev *eth = bus-priv;
- int port = eth-port;
+
+
On 31.01.2012 15:03, Matthias Fuchs wrote:
Hi,
I have a problem booting the current u-boot-imx version
on a MX28EVK via USB. The i.MX28 CPU supports a special boot mode
where the image (sb boot stream) is downloaded via USB device
(all DIP switches in position 'off' on the EVK). The
CPU's
On Wednesday 01 February 2012 18:37:27 Simon Glass wrote:
On Tue, Jan 31, 2012 at 11:53 AM, Mike Frysinger wrote:
--- a/include/os.h
+++ b/include/os.h
+#define OS_SEEK_SET0
+#define OS_SEEK_CUR0
+#define OS_SEEK_END0
0, 1, 2?
see if you can guess what 1 mode i tested
Follow up patches want to be able to seek fd's.
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
v2.1
- fix thinko in os_seek_xxx defines
arch/sandbox/cpu/os.c | 13 +
include/os.h | 15 +++
2 files changed, 28 insertions(+), 0 deletions(-)
diff
On Thursday 26 January 2012 04:21:21 Stefano Babic wrote:
On 26/01/2012 00:40, Joe Hershberger wrote:
I have a basic question about your patchset. RFC3927 requires that
addresses are continuosly checked to avoid conflicts - this is a strict
requirement.
True. It cannot be 100%
On Tuesday 24 January 2012 01:27:53 Joe Hershberger wrote:
On Tue, Jan 24, 2012 at 12:09 AM, Simon Glass wrote:
On Fri, Jan 20, 2012 at 12:15 PM, Joe Hershberger wrote:
On Fri, Jan 20, 2012 at 10:22 AM, Simon Glass wrote:
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger wrote:
@@ -1454,9
in general, i like this. my only concern would be the drivers that might
break due to incorrect cache management (which the volatile markers happen to
work around for them).
having the API accept a volatile but then casting it away puts us in a worse
place i think. on one hand, our API is
i hope you ran a script on this and didn't do it by hand :). can you post the
commands that you ran ?
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
On Thursday 19 January 2012 19:53:06 Joe Hershberger wrote:
Clears up checkpatch.pl complaint about extern in c file
Completes the effort started by Ben Warren in 2008 to generalize
eth init
awesome. these boards have been around forever, so if Stefan doesn't have
any feedback, i'm good to
On Thursday 19 January 2012 19:53:07 Joe Hershberger wrote:
--- a/net/bootp.c
+++ b/net/bootp.c
+#ifdef CONFIG_BOOTP_RANDOM_DELAY
+#include net_rand.h
+#endif
let's push this CONFIG_xxx check into net_rand.h so we don't have to check it
every time we include the file
-mike
signature.asc
On Thursday 19 January 2012 19:53:08 Joe Hershberger wrote:
--- a/include/net.h
+++ b/include/net.h
+int is_cdp_packet(const uchar *et_addr);
seems like this would be better as a static inline since it's just a memcmp
--- /dev/null
+++ b/net/cdp.h
@@ -0,0 +1,18 @@
+/*
+ * Copied from
Acked-by: Mike Frysinger vap...@gentoo.org
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Tuesday 24 January 2012 00:37:51 Simon Glass wrote:
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger wrote:
include/configs/am3517_crane.h |2 +-
include/configs/am3517_evm.h |2 +-
include/configs/origen.h |2 +-
Perhaps move these config changes to another
On Thursday 19 January 2012 19:53:10 Joe Hershberger wrote:
--- a/net/net.c
+++ b/net/net.c
+#if defined(CONFIG_CMD_PING)
+#include ping.h
+#endif
please push ifdef down into ping.h header
-mike
signature.asc
Description: This is a digitally signed message part.
Acked-by: Mike Frysinger vap...@gentoo.org
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Friday 03 February 2012 12:49:12 Mike Frysinger wrote:
On Thursday 19 January 2012 19:53:06 Joe Hershberger wrote:
Clears up checkpatch.pl complaint about extern in c file
Completes the effort started by Ben Warren in 2008 to generalize
eth init
awesome. these boards have been around
On Thursday 19 January 2012 19:53:12 Joe Hershberger wrote:
Un-typedef IP_t, Ethernet_t, VLAN_Ethernet_t, ARP_t, ICMP_t
i'm not sure about this. i don't mind the typedefs myself and they have the
advantage of already being done ... let's see what Wolfgang prefers.
The existing definition of
hmm, thinking a bit more, i wonder if it makes more sense to split all of icmp
out of net.c
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
Acked-by: Mike Frysinger vap...@gentoo.org
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Thursday 19 January 2012 19:53:13 Joe Hershberger wrote:
--- a/include/net.h
+++ b/include/net.h
-#define E802_HDR_SIZE22 /* 802 ethernet header size
*/
+ /* 802.2 + SNAP + ethernet header size */
+#define E802_HDR_SIZE
On Tuesday 24 January 2012 01:19:14 Simon Glass wrote:
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger wrote:
Rename parameter len to payload_len in NetSendUDPPacket: this name
more explicitly claims that it does not include the header size
Rename CDPHandler to CDPReceive: this is not
Acked-by: Mike Frysinger vap...@gentoo.org
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Acked-by: Mike Frysinger vap...@gentoo.org
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Tuesday 24 January 2012 02:15:41 Joe Hershberger wrote:
On Tue, Jan 24, 2012 at 1:05 AM, Simon Glass wrote:
On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger wrote:
- debug(Transmitting DHCPREQUEST packet: len = %d\n, pktlen);
#ifdef CONFIG_BOOTP_DHCP_REQUEST_DELAY
On Thursday 19 January 2012 19:53:18 Joe Hershberger wrote:
Use this entry-point consistently across the net/ code
i like this, but i'd like it even more if NetSendPacket() was a static inline
in the header. all this func does is jump straight to eth_send():
01fa2054 _NetSendPacket:
1fa2054:
On Thursday 19 January 2012 19:53:19 Joe Hershberger wrote:
Changes to NetState now go through an accessor function called
NetSetState()
i'm not sure i see the value here. all i see is overhead being added. if you
really want this to be an improvement, there's two minor tweaks to make.
---
Hi,
this is how the imx-bootlets does it though. It's likely that FSL wants
the PLL0 to run from XTAL when doing power configuration?
I was using the FLS bootlets as a reference too, but I have noticed a
number of 'mistakes' in that code. For example:
- Busy-indicators aren't
On Thursday 19 January 2012 19:53:20 Joe Hershberger wrote:
Only call the handlers if one was registered... don't require
protocols to register a handler (eliminating dummies)
NetConsole now uses the ARP handler when waiting on arp (instead of
needing a #define hack in arp.c)
Clear
Hi Mike,
On 3 February 2012 02:51, Mike Frysinger vap...@gentoo.org wrote:
On Thursday 02 February 2012 04:11:27 Chander Kashyap wrote:
--- /dev/null
+++ b/board/samsung/smdk5250/tools/mkexynos_image.c
tools should be in tools/. there are already plenty of examples in there (see
On Thursday 19 January 2012 19:53:21 Joe Hershberger wrote:
--- a/net/net.c
+++ b/net/net.c
+int
+NetUpdateEther(struct Ethernet_t *et, uchar *addr, uint prot)
+{
+ ushort protlen;
+
+ memcpy(et-et_dest, addr, 6);
+ memcpy(et-et_src, NetOurEther, 6);
+ protlen =
On Thursday 19 January 2012 19:53:22 Joe Hershberger wrote:
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
+#if !defined(CONFIG_BOOTP_SERVERIP)
if (NetServerIP) {
ip_to_string (NetServerIP, tmp);
setenv (serverip, tmp);
}
+#endif
please add a
Hi,
you're only writing data to the register, not clearing them. So maybe
some bits remain set?
The assignment will work here. There're only 8 bits, of which 6 are the
fractional divider, one is de read-only stable indicator (unaffected by
writes) and the last one is the gating bit.
Acked-by: Mike Frysinger vap...@gentoo.org
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Acked-by: Mike Frysinger vap...@gentoo.org
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Thursday 19 January 2012 19:53:25 Joe Hershberger wrote:
--- a/include/net.h
+++ b/include/net.h
-extern int NetLoop(enum proto_t);
+extern int NetLoop(enum proto_t protocol);
explicit variable names are unnecessary when the type is self explanatory
--- a/net/net.c
+++ b/net/net.c
On Thursday 19 January 2012 19:53:28 Joe Hershberger wrote:
--- a/README
+++ b/README
+ CONFIG_BOOTP_CAN_FAIL - If the DHCP server is not found
+ after the configured retry count, the call will fail
+ instead of starting over. This can be used to fail
On Thursday 19 January 2012 19:53:29 Joe Hershberger wrote:
--- a/README
+++ b/README
- CONFIG_CMD_PCMCIA * PCMCIA support
+ CONFIG_CMD_PCMCIA * PCMCIA support
please omit unrelated whitespace changes
--- a/common/cmd_net.c
+++
On Thursday 19 January 2012 19:53:30 Joe Hershberger wrote:
Cisco's arp-proxy feature fails to ignore the link-local address range
This means that a link-local device on a network with this Cisco
equipment will reply to ARP requests for our device (in addition
to our reply)
...
---
On Thursday 19 January 2012 19:53:31 Joe Hershberger wrote:
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
+#define DEBUG_DEV_PKT 0
wouldn't be better to move these to net.h by default rather than copying
pasting to all the source files ?
-mike
signature.asc
Description:
Hi Igor,
Sorry for late reply, Was really busy with some other tasks.
On Sun, Jan 29, 2012 at 3:12 PM, Igor Grinberg grinb...@compulab.co.il wrote:
Hi Govindraj,
Put Remy on Cc.
Yes Sure,
Note: my new mail client for some reason, messes with white spaces...
(Thunderbird (9) just gets
Fixed! Patch follows.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
This patch fixes booting i.MX28 CPUs via USB download.
In this mode the CPU's bootrom implements a USB HID device that
accepts a bootstream.
When downloading the bootstream via USB, first the SPL code is
received and executed. Then the u-boot image is received and
called.
The USB bootmode is
On Sun, Jan 29, 2012 at 5:12 PM, Stefano Babic sba...@denx.de wrote:
On 29/01/2012 10:42, Igor Grinberg wrote:
Hi Govindraj,
Hi all,
Put Remy on Cc.
Remy resigned as USB maintainer - but Tom is aware about these patches...
Note: my new mail client for some reason, messes with white
Tom,
On Thu, Feb 02, 2012 at 22:18:09, Tom Rini wrote:
On Thu, Feb 2, 2012 at 6:53 AM, Manjunath Hadli manjunath.ha...@ti.com
wrote:
Add 'clocks' command to print various frequencies such as ARM
frequency, DSP core frequency and DDR frequency. Remove
print_cpuinfo() function as it is no
musb_hcd.c: In function 'musb_submit_rh_msg':
musb_hcd.c:827:2: warning: format '%d' expects type 'int',
but argument 3 has type 'long unsigned int'
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
drivers/usb/musb/musb_hcd.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
pata_bfin.c: In function 'bfin_ata_identify':
pata_bfin.c:887:2: warning: format '%x' expects type 'unsigned int',
but argument 2 has type 'lbaint_t'
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
drivers/block/pata_bfin.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
On 02/03/12 14:50, Govindraj wrote:
[...]
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/usb/ulpi/omap-ulpi-viewport.c
b/drivers/usb/ulpi/omap-ulpi-viewport.c
new file mode 100644
index 000..1718788
--- /dev/null
+++ b/drivers/usb/ulpi/omap-ulpi-viewport.c
@@
This patch fixes booting i.MX28 CPUs via USB download.
In this mode the CPU's bootrom implements a USB HID device that
accepts a bootstream.
When downloading the bootstream via USB, first the SPL code is
received and executed. Then the u-boot image is received and
called.
The USB
Wolfgang,
On Fri, Feb 03, 2012 at 03:47:47, Wolfgang Denk wrote:
Dear Manjunath Hadli,
In message 1328190138-5276-3-git-send-email-manjunath.ha...@ti.com you
wrote:
add support to read mac address for AM18x EVM manufactured from
Spectrum digital which have mac address stored in I2C
From: Govindraj.R govindraj.r...@ti.com
Extend the existing ulpi viewport framework
to pass the port number information for any ulpi
ops. Fix the usage of ulpi api's accordingly.
Tested-by: Stefano Babic sba...@denx.de
Signed-off-by: Govindraj.R govindraj.r...@ti.com
---
From: Govindraj.R govindraj.r...@ti.com
Clean up added ehci-omap.c and make it generic for re-use across
omap-soc having same ehci ip block. Also pass the modes to be configured
from board file and configure the ports accordingly. All usb layers
are not cache aligned, till then keep cache off for
From: Govindraj.R govindraj.r...@ti.com
Based on discussion from this thread [1].
Adding omap-view port that helps us in using the generic ulpi
framework for any ulpi phy ops using the INSNREG05_ULPI viewport
reg available on omap platform.
Currently ehci ports are available on omap3/4 platforms
From: Govindraj.R govindraj.r...@ti.com
Clean up ehci-omap added and make it generic to extend support for omap4 socs.
Adds omap-ulpi-viewport for ulpi access from ehci-omap.
Adds ehci support for omap4-panda.
Based on latest denx master branch commit:
From: Govindraj.R govindraj.r...@ti.com
For beagle and panda enable and use the ehci-omap.c generic
api's added to configure usb host ports based on data passed
from board file to configure in modes as specified from board data.
For panda initialise the mux pins for ehci usage.
Signed-off-by:
From: Govindraj.R govindraj.r...@ti.com
usb dpll configuration is done only part of non-essential
dppl configuration however if CONFIG_USB_EHCI_OMAP is defined
we may have to configure usb dpll's for proper functioning
of usb modules. So move the usb dppl configuration to a new func.
and utilise
From: Govindraj.R govindraj.r...@ti.com
Adding ehci clock enabling mechanism part of clock framework.
When essential clocks are enabled during init phase usb host
clocks can also be enabled from clock framework.
Signed-off-by: Govindraj.R govindraj.r...@ti.com
---
From: Ilya Yanok ya...@emcraft.com
Taken from Beagle code. Tested on mcx board (AM3517-based).
Signed-off-by: Ilya Yanok ya...@emcraft.com
---
board/ti/beagle/beagle.c | 101 --
drivers/usb/host/Makefile |1 +
drivers/usb/host/ehci-omap.c | 156
Awesome. So after reading your replies, let's just rename mx28_reg to
mx28_reg_32 and introduce mx28_reg_8 for this particular problem.
You were probably already foreseeing this when you made your
suggestion to use accessors, but now I'm working it I see introducing
mx28_reg_8 may get too
Awesome. So after reading your replies, let's just rename mx28_reg to
mx28_reg_32 and introduce mx28_reg_8 for this particular problem.
You were probably already foreseeing this when you made your
suggestion to use accessors, but now I'm working it I see introducing
mx28_reg_8 may get too
Make it an array?
If that works for you, it works for me. Thanks!
#define __mx28_reg_8(name) \
uint8_t name##[4]; \
uint8_t name##[4]_set; \
uint8_t name##[4]_clr; \
uint8_t name##[4]_tog;
On 03.02.2012 14:22, Marek Vasut wrote:
This patch fixes booting i.MX28 CPUs via USB download.
In this mode the CPU's bootrom implements a USB HID device that
accepts a bootstream.
When downloading the bootstream via USB, first the SPL code is
received and executed. Then the u-boot image is
Make it an array?
If that works for you, it works for me. Thanks!
#define __mx28_reg_8(name) \
uint8_t name##[4]; \
uint8_t name##[4]_set; \
uint8_t name##[4]_clr; \
uint8_t name##[4]_tog;
Might be
On 03.02.2012 14:22, Marek Vasut wrote:
This patch fixes booting i.MX28 CPUs via USB download.
In this mode the CPU's bootrom implements a USB HID device that
accepts a bootstream.
When downloading the bootstream via USB, first the SPL code is
received and executed. Then the u-boot
On Thursday 02 February 2012 08:42:17 Manjunath Hadli wrote:
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
int misc_init_r(void)
{
dspwake();
+
+#ifdef CONFIG_MAC_ADDR_IN_SPIFLASH
+ uchar buff[8];
+ int ret;
+
+ if
On Fri, Feb 3, 2012 at 6:38 AM, Govindraj.R govindraj.r...@ti.com wrote:
From: Govindraj.R govindraj.r...@ti.com
Clean up ehci-omap added and make it generic to extend support for omap4 socs.
Adds omap-ulpi-viewport for ulpi access from ehci-omap.
Adds ehci support for omap4-panda.
Based on
Dear Hadli, Manjunath,
In message e99faa59f8d8d34d8a118dd37f7c8f753174c...@dbde01.ent.ti.com you
wrote:
NAK. This has been discussed a thousand times before, so please look it
up in the archives.
The environment always has precedence. If there are several places to sto
re tha MAC
This patchset add support for Samsung's SMDK5250 board based on
EXYNOS5250 based SoC. It also adds support for MMC SPL booting.
The porting is done by Samsung engineers at HQ in System LSI Team.
I am contributing in upstreaming the code for the board.
Based upon discussions following patches are
CONFIG_SYS_CLK_FREQ_C210 macro giving notion of S5PC2XX (Exynos4)
architecture. Replace CONFIG_SYS_CLK_FREQ_C210 with CONFIG_SYS_CLK_FREQ
to make it generic for exynos architecture.
Signed-off-by: Chander Kashyap chander.kash...@linaro.org
---
Changes for v2:
- None
Changes for v3:
Samsung's ARM Cortex-A15 based SoCs are known as Exynos5 series of
SoCs. This patch adds the support for Exynos5.
Signed-off-by: Chander Kashyap chander.kash...@linaro.org
---
Changes for v2:
- This patch was part of EXYNOS: Add SMDK5250 board support
- Now it is seprated as SoC
This patch adds support for MMC SPL booting.
Signed-off-by: Chander Kashyap chander.kash...@linaro.org
---
Changes for v2:
- None
Changes for v3:
- None
Changes for v4:
- None
Changes for v5:
- None
Changes for v6:
- None
Changes for v7:
- None
SMDK5250 board is based on Samsungs EXYNOS5250 SoC.
Signed-off-by: Chander Kashyap chander.kash...@linaro.org
---
Changes for v2:
- This patch is bifurcated into borad support and SoC support
- Fixed typo: s/EEYNOS/EXYNOS
- Squashed patch SMDK5250: enable device tree
On 03/02/2012 12:34, Mike Frysinger wrote:
On Thursday 26 January 2012 04:21:21 Stefano Babic wrote:
On 26/01/2012 00:40, Joe Hershberger wrote:
I have a basic question about your patchset. RFC3927 requires
that addresses are continuosly checked to avoid conflicts -
this is a strict
Hi Stephen,
On Thu, Feb 2, 2012 at 1:55 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/24/2012 04:21 PM, Simon Glass wrote:
This adds a property to indicate a port which can switch between host and
device
mode.
...
diff --git a/doc/device-tree-bindings/usb/tegra-usb.txt
Hi Stephen,
On Thu, Feb 2, 2012 at 2:07 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/24/2012 04:21 PM, Simon Glass wrote:
This adds clock references to the USB part of the device tree for U-Boot.
The USB timing information may vary between boards sometimes, but for
now we hard-code it
Hi Stephen,
On Thu, Feb 2, 2012 at 2:17 PM, Stephen Warren swar...@nvidia.com wrote:
On 01/24/2012 04:21 PM, Simon Glass wrote:
This switches Seaboard over to use FDT for run-time config instead of
CONFIG options. USB is the only user at present.
Signed-off-by: Simon Glass s...@chromium.org
This adds clock references to the USB part of the device tree for U-Boot,
and marks USB1 as supporting legacy mode (which we disable in the driver).
The USB timing information may vary between boards sometimes, but for
now we hard-code it in C. This is because all current T2x boards use
the same
We set up two USB ports, one of which can be host or device.
For some reason the kernel version does enable both ports.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Remove 0x from fdt aliases
- Use okay instead of ok for fdt node status
Changes in v3:
- Disable USB2 which is
Hi Amit,
Le 03/02/2012 07:57, Amit Virdi a écrit :
Adding Albert now...
... but the wrong (old) address though :)
On 2/3/12, Amit Virdiamitvi...@gmail.com wrote:
Albert,
Any suggestions?
Thanks
Amit Virdi
On 2/1/12, Amit Virdiamitvi...@gmail.com wrote:
Hi All,
I'm in the process of
Hi Tom,
Le 02/02/2012 19:10, Tom Rini a écrit :
Hello,
The following changes since commit 78936e6d110bbcfe6db3406456c16a7a174ae031:
Tom Rini (1):
OMAP3: Correct get_sdr_cs_offset mask
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
Dechesne,
Hi Simon,
Le 15/01/2012 02:20, Simon Glass a écrit :
Hi,
Hmmm patman found a tag in this commit and tried to send it to Fred
Bloggs. I have added the line below - sorry for the confusion.
On Sat, Jan 14, 2012 at 5:12 PM, Simon Glasss...@chromium.org wrote:
What is this?
=
This
Hi Albert,
On Fri, Feb 3, 2012 at 11:00 AM, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Hi Simon,
Le 15/01/2012 02:20, Simon Glass a écrit :
Hi,
Hmmm patman found a tag in this commit and tried to send it to Fred
Bloggs. I have added the line below - sorry for the confusion.
On Sat,
Hi David,
Le 09/01/2012 08:23, David Müller (ELSOFT AG) a écrit :
Hello
Any news?
Adding Minkyu.
Amicalement,
--
Albert.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Simon,
Le 03/02/2012 20:30, Simon Glass a écrit :
Hi Albert,
On Fri, Feb 3, 2012 at 11:00 AM, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Hi Simon,
Le 15/01/2012 02:20, Simon Glass a écrit :
Hi,
Hmmm patman found a tag in this commit and tried to send it to Fred
Bloggs. I have
Simon Glass wrote at Friday, February 03, 2012 10:08 AM:
We set up two USB ports, one of which can be host or device.
For some reason the kernel version does enable both ports.
Signed-off-by: Simon Glass s...@chromium.org
Acked-by: Stephen Warren swar...@nvidia.com
--
nvpublic
Simon Glass wrote at Friday, February 03, 2012 10:08 AM:
This adds clock references to the USB part of the device tree for U-Boot,
and marks USB1 as supporting legacy mode (which we disable in the driver).
The USB timing information may vary between boards sometimes, but for
now we hard-code
Hi,
I am slowly catching up on my e-mail, so...
Le 11/01/2012 00:24, Tom Rini a écrit :
A hawkboard conversion is pending Albert ack'ing/commenting on a
generic ARM fixup.
Can you point me to this patch series? I'll look it up as soon as possible.
Amicalement,
--
Albert.
Sorry for the late answer, Jilin.
Le 13/01/2012 01:18, Jilin Zhou a écrit :
Hi Albert,
Thanks for the reply. My host environment is Mac. Our company has a cross
compiler toolchain for armv7.
The commands I run are as follows:
1. export CROSS_COMPILE=ntoarmv7-
2. make omap4_panda_config
3.
Hi Vladimir,
Le 12/01/2012 00:12, Vladimir Zapolskiy a écrit :
This change adds complete support for Starterkit SK-AT91SAM9/SIM508
board.
Signed-off-by: Vladimir Zapolskiyv...@mleia.com
Cc: Albert ARIBAUDalbert.u.b...@aribaud.net
Cc: Wolfgang Denkw...@denx.de
---
Changes from v1 to v2:
* make
1 - 100 of 130 matches
Mail list logo
