On 09/26/2013 09:26 AM, Mischa Jonker wrote:
Vipin wrote:
I have also faced this problem before. May be a better solution is to
place all the struct and buffer declarations at the very start of
dw_eth_dev structure (off-course with a comment that these should not
be moved). It may avoid the
Dear York,
In message 52437209.9020...@freescale.com you wrote:
As David Feng post his patch set to add ARMv8 support, I am trying to
enable it for Freescale implementation. Let's name it as LS2 for this
discussion. I am thinking to reuse as much as possible for existing
codes, which
On 09/26/13 03:50, Marek Vasut wrote:
Dear Mateusz Zalega,
On 09/19/13 16:34, Marek Vasut wrote:
I checked powerpc and arches glacier and glacier_nand don't build.
Can you please check and fix ? You can get the ELDK 5.4 PPC toolchain
from [1].
http://www.denx.de/wiki/ELDK-5/
Hello,
-原始邮件-
发件人: sun york-R58495 r58...@freescale.com
发送时间: 2013年9月26日 星期四
收件人: FengHua feng...@phytium.com.cn
抄送: albert.u.boot albert.u.b...@aribaud.net, trini tr...@ti.com, Wood
Scott-B07421 b07...@freescale.com, u-boot u-boot@lists.denx.de
主题: Re: [U-Boot] When to create a SoC
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2
- No change
disk/Makefile | 34 ++
1 file changed, 6 insertions(+), 28 deletions(-)
diff --git a/disk/Makefile b/disk/Makefile
index 2b04e03..48abec8 100644
--- a/disk/Makefile
+++
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2
- No change
net/Makefile | 46 --
1 file changed, 12 insertions(+), 34 deletions(-)
diff --git a/net/Makefile b/net/Makefile
index 4c9a97f..31aadc2 100644
---
Multiple targets are included in arch/arm/imx-common/Makefile
In order to refactor it,
we need to tweak Makefile and spl/Makefile.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2
- No change
Makefile | 8 +---
arch/arm/imx-common/Makefile
In every sub directory, Makefile is like follows:
include $(TOPDIR)/config.mk
LIB = $(obj)libfoo.o
COBJS := ...
COBJS += ...
SOBJS := ...
SRCS:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS:= $(addprefix $(obj),$(COBJS) $(SOBJS))
all: $(obj).depend $(LIB)
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2
- No change
common/Makefile | 389
common/spl/Makefile | 36 +
2 files changed, 189 insertions(+), 236 deletions(-)
diff --git a/common/Makefile
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changed for v2:
- updated 6 files to rebase on the master
drivers/serial/Makefile
drivers/mmc/Makefile
drivers/video/Makefile
drivers/watchdog/Makefile
drivers/rtc/Makefile
Note1:
In arch/arm/cpu/arm926ejs/spear/Makefile
START := start.o
was changed
extra-$(CONFIG_SPL_BUILD) := start.o
because spear/start.o is only used for SPL.
Note2:
START := start.o
was missing from arch/arm/cpu/arm926ejs/mxs/Makefile.
This commit simply adds
extra-$(CONFIG_SPL_BUILD) := start.o
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2
- No change
arch/arm/cpu/arm920t/Makefile | 28 +++-
arch/arm/cpu/arm920t/a320/Makefile| 25 ++---
arch/arm/cpu/arm920t/at91/Makefile| 33
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2
- No change
arch/arm/cpu/arm720t/Makefile | 26 ++
arch/arm/cpu/arm720t/tegra-common/Makefile | 25 ++---
arch/arm/cpu/arm720t/tegra114/Makefile | 25
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2
- No change
lib/Makefile| 114 ++--
lib/libfdt/Makefile | 27 +
lib/lzma/Makefile | 24 +--
lib/lzo/Makefile| 24 +--
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2
- No change
fs/Makefile | 24 +---
fs/cbfs/Makefile | 24 +---
fs/cramfs/Makefile | 29 ++---
fs/ext4/Makefile | 27
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2:
-2/19: updated 3 files to rebase on the master
arch/arm/cpu/armv7/mx6/Makefile
arch/arm/cpu/armv7/socfpga/Makefile
arch/arm/cpu/armv7/zynq/Makefile
arch/arm/cpu/armv7/Makefile
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2
- No change
drivers/net/Makefile | 136 ---
drivers/net/fm/Makefile | 59 +++-
drivers/net/npe/Makefile | 24 +
drivers/net/phy/Makefile | 60
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Cc: Simon Glass s...@chromium.org
---
Changes for v2
- No change
arch/sandbox/cpu/Makefile | 23 +--
arch/sandbox/lib/Makefile | 25 +
2 files changed, 2 insertions(+), 46 deletions(-)
diff
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2
- No change
drivers/usb/eth/Makefile | 28 ++--
drivers/usb/gadget/Makefile | 54 ++-
drivers/usb/host/Makefile | 74 +++
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2
- No change
drivers/mtd/Makefile | 44 +--
drivers/mtd/nand/Makefile| 102 +--
drivers/mtd/onenand/Makefile | 27 ++--
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Cc: Tom Rini tr...@ti.com
---
Changes for v2
- No change
board/ti/am335x/Makefile | 29 ++---
board/ti/am3517crane/Makefile | 19 +--
board/ti/am43xx/Makefile | 29
Kbuild in U-Boot has been talked for a while
and RFC patches were posted by Simon Glass.
(Refer to RFC: Add Kbuild system to U-Boot
posted by Simon, May 12, 2013)
Simon's effort is a good start point but
varous critical features were missing from his patch series.
I have also been eager to
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes for v2
- No change
arch/arm/cpu/arm1136/Makefile | 26 +-
arch/arm/cpu/arm1136/mx31/Makefile | 27 ++-
arch/arm/cpu/arm1136/mx35/Makefile | 28 ++-
arch/arm/cpu/arm1176/Makefile
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 09/25/2013 10:17 PM, Masahiro Yamada wrote:
As far as I know, gcc does not support -fstack-usage
for some targets such as blackfin, m68k, microblaze, etc.
If -fstack-usage option is given for those targets,
gcc displays a warning message as
Note:
arch/powerpc/cpu/mpc8260/Makefile is originally like follows:
---snip---
START = start.o kgdb.o
COBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
---snip---
COBJS-$(CONFIG_ETHER_ON_SCC) = ether_scc.o
---snip---
$(LIB): $(OBJS)
I posted v2 for this series.
Best Regards
Masahiro Yamada
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hello Jagan,
it seems an almost ready patch for m25p80 driver in the kernel was posted today:
[PATCHv2] drivers: mtd: devices: Add quad read support.
http://thread.gmane.org/gmane.linux.drivers.mtd/48552/focus=48557
Please see how there in the function m25p80_quad_read
the rx_nbits in the
This patch prevents data abort when pmic bat command is called
on non-batery pmic device.
Signed-off-by: Piotr Wilczek p.wilc...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
CC: Lukasz Majewski l.majew...@samsung.com
CC: Minkyu Kang mk7.k...@samsung.com
---
(re-sending by dropping cc-list, as u-boot maillist moderated earlier mail
saying
Too many recipients to the message :-) )
From: Scott Wood [mailto:scottw...@freescale.com]
On Wed, 2013-09-25 at 22:08 +, Woodruff, Richard wrote:
Short comment. Apologies for top posting:
The
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
common/board_f.c | 18 +++---
common/board_r.c | 20 +++-
2 files changed, 30 insertions(+), 8 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c
index
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
include/linux/linkage.h |4
1 file changed, 4 insertions(+)
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 9ddf830..2a2848a 100644
--- a/include/linux/linkage.h
+++
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
Signed-off-by: Bhupesh Sharma bhupesh.sha...@freescale.com
---
board/armltd/dts/vexpress64.dts | 439 ++
board/armltd/vexpress64/Makefile | 27 +++
From: David Feng feng...@phytium.com.cn
Changes for v13:
- fix the bug of board_r.c and arm/lib/board.c due to
CONFIG_NEED_MANUAL_RELOC. adjust initr_serial() in board_r.c
to the first entry of init_sequence_r[] and relocate
serial_initialize() in arm/lib/board.c, routines of
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
common/fdt_support.c | 66 ++
1 file changed, 34 insertions(+), 32 deletions(-)
diff --git a/common/fdt_support.c b/common/fdt_support.c
index
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
common/cmd_pxe.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c
index a2fb50a..df58522 100644
--- a/common/cmd_pxe.c
+++ b/common/cmd_pxe.c
On 09/26/2013 01:52 PM, Tom Rini wrote:
On 09/25/2013 10:17 PM, Masahiro Yamada wrote:
As far as I know, gcc does not support -fstack-usage
for some targets such as blackfin, m68k, microblaze, etc.
Please remove microblaze from this list.
Our gcc support fstack-usage.
If your microblaze gcc
On 09/26/2013 03:49 AM, FengHua wrote:
-原始邮件-
发件人: sun york-R58495 r58...@freescale.com
发送时间: 2013年9月26日 星期四
收件人: FengHua feng...@phytium.com.cn
抄送: albert.u.boot albert.u.b...@aribaud.net, trini tr...@ti.com, Wood
Scott-B07421 b07...@freescale.com, u-boot u-boot@lists.denx.de
Hi York,
On 20/09/2013 21:24, York Sun wrote:
Convert set_hdr_func(struct imx_header *imxhdr) to set_hdr_func(void)
to get rid of the warning
warning: ‘imxhdr’ is used uninitialized in this function
Signed-off-by: York Sun york...@freescale.com
---
tools/imximage.c |8
1
Michael,
Again, sorry. I will continue to work on improving my style
for commit messages in the future.
Michael Burr // Software Engineer II
Logic PD
T // 612.436.7273
NOTICE: Important disclaimers and limitations apply to this email.
Please see this web page for our disclaimers and
Signed-off-by: Michael Burr michael.b...@logicpd.com
Cc: Heiko Schocher h...@denx.de
Cc: Michal Simek mon...@monstr.eu
---
=== Note: this patch depends on the previous patch titled
=== [PATCH] I2C: Zynq: Support for 0-length register address
=== submitted 24 Sep. 2013.
Tested on Xilinx ZC702 eval
Hi Troy, Marek,
On 26/09/2013 03:41, Troy Kisky wrote:
Stefano, if you would you like to take the last 3 patches,
you should apply i.MX6Q/DLS: Add MX6_PAD_GPIO_1__USB_OTG_ID
from Eric Nelson first.
Eric's patch is already in my queue, I will apply it.
The patches are mostly independent,
On 9/25/2013 5:21 AM, Lars Poeschel wrote:
From: Lars Poeschel poesc...@lemonage.de
I compiled and tried v2013.10-rc2 on pcm051 and it fails booting over
tftp. I could bisect 2bf36ac638ab2db9f0295aa47064976eeebf80c1 as the
cause of the problem. It moves bd_ram_ofs from the cpsw driver to the
On 09/26/2013 03:49 AM, FengHua wrote:
-原始邮件-
发件人: sun york-R58495 r58...@freescale.com
发送时间: 2013年9月26日 星期四
收件人: FengHua feng...@phytium.com.cn
抄送: albert.u.boot albert.u.b...@aribaud.net, trini tr...@ti.com, Wood
Scott-B07421 b07...@freescale.com, u-boot u-boot@lists.denx.de
On Thu, 2013-09-26 at 13:23 +0800, FengHua wrote:
Date: Wed, 25 Sep 2013 20:10:13 -0500
From: Scott Wood scottw...@freescale.com
Subject: Re: [U-Boot] When to create a SoC directory for ARM
To: sun york-R58495 r58...@freescale.com
Cc: Rini tr...@ti.com, Wood Scott-B07421
Hi Marek
I thought you might like to be aware of this error, if not already known.
Thanks
Troy
/u-boot-imx6/LOG$ cat mx28evk.ERR
mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directory
compilation terminated.
make[1]: *** [mxsimage.o] Error 1
make[1]: *** Waiting for
On 9/26/2013 9:18 AM, Stefano Babic wrote:
Hi Troy, Marek,
On 26/09/2013 03:41, Troy Kisky wrote:
Stefano, if you would you like to take the last 3 patches,
you should apply i.MX6Q/DLS: Add MX6_PAD_GPIO_1__USB_OTG_ID
from Eric Nelson first.
Eric's patch is already in my queue, I will apply
Sigh. It wasn't. It's a hypothetical possibility to help guide the
decision of whether to classify a piece of code as arm64 or armv8.
-Scott
On Thu, 2013-09-26 at 10:30 +0530, Mj Embd wrote:
When 64-bit ARMv9 was announced ?
On Thu, Sep 26, 2013 at 4:46 AM, Scott Wood
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de]
On Behalf Of Scott Wood
Sent: Friday, September 27, 2013 12:53 AM
To: FengHua
Cc: trini; sun york-R58495; u-boot
Subject: Re: [U-Boot] When to create a SoC directory for ARM
On Thu,
On 09/26/2013 12:46 PM, Sharma Bhupesh-B45370 wrote:
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de]
On Behalf Of Scott Wood
Sent: Friday, September 27, 2013 12:53 AM
To: FengHua
Cc: trini; sun york-R58495; u-boot
Subject: Re: [U-Boot]
-Original Message-
From: sun york-R58495
Sent: Friday, September 27, 2013 1:19 AM
To: Sharma Bhupesh-B45370; Wood Scott-B07421; 'FengHua'
Cc: 'trini'; sun york-R58495; 'u-boot'
Subject: Re: [U-Boot] When to create a SoC directory for ARM
On 09/26/2013 12:46 PM, Sharma
On Thu, 2013-09-26 at 12:48 -0700, York Sun wrote:
On 09/26/2013 12:46 PM, Sharma Bhupesh-B45370 wrote:
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de]
On Behalf Of Scott Wood
Sent: Friday, September 27, 2013 12:53 AM
To: FengHua
On 09/26/2013 12:55 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 12:48 -0700, York Sun wrote:
On 09/26/2013 12:46 PM, Sharma Bhupesh-B45370 wrote:
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de]
On Behalf Of Scott Wood
Sent: Friday,
On Thu, 2013-09-26 at 13:14 +, Gupta, Pekon wrote:
From: Gupta, Pekon pe...@ti.com
NAND driver needs to know bus-width of the connected NAND device, in
order to perform proper I/O and initialize itself. Currently there is no
CONFIG
option to provide this information to NAND
From: Scott Wood [mailto:scottw...@freescale.com]
On Wed, 2013-09-25 at 22:08 +, Woodruff, Richard wrote:
Short comment. Apologies for top posting:
The first incarnations of SPL and loader mainly cared about the boot flash
device.
Is there an SPL that cares about something
Dear Troy Kisky,
Hi Marek
I thought you might like to be aware of this error, if not already known.
Known, when building for MXS (mx23 and mx28), you need libssl-dev installed
(openssl development libs and headers). Same rule applies when you use signed
FIT images.
So, solution is to
Dear Troy Kisky,
On 9/26/2013 9:18 AM, Stefano Babic wrote:
Hi Troy, Marek,
On 26/09/2013 03:41, Troy Kisky wrote:
Stefano, if you would you like to take the last 3 patches,
you should apply i.MX6Q/DLS: Add MX6_PAD_GPIO_1__USB_OTG_ID
from Eric Nelson first.
Eric's patch is
Switch the case of non-redundant non-embedded environment to use malloc
to allocate buffers, rather than place them on the stack, like the
redundant case does.
Signed-off-by: Tom Rini tr...@ti.com
---
common/env_mmc.c | 15 ---
1 file changed, 12 insertions(+), 3 deletions(-)
diff
Hey all,
This series fixes a few bugs / issues, and then sets things up so that
we can use MMC (or NAND) for environment in SPL, in addition to NOR
flash or simply built-in. The end result is that Falcon Mode becomes
much more configurable via the environment, and thus from within Linux.
--
Currently our limit is too small to allow for /dev/mmcblk0boot0 to work,
for example. Expand to 32 for future needs.
Signed-off-by: Tom Rini tr...@ti.com
---
tools/env/fw_env.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index
Previously, we forced a no environment choice on network using SPL.
Now we allow all users to set where they want to look for their
environment. This means we have to set CONFIG_SPL_ENV_SUPPORT now for
ti_armv7_common.h.
Signed-off-by: Tom Rini tr...@ti.com
---
common/Makefile
Inside of SPL we only concern ourself with one MMC device, so instead of
being able to use CONFIG_SYS_MMC_ENV_DEV we need to use 0 in SPL.
Switch the code to use a 'dev' variable to facilitate this.
Signed-off-by: Tom Rini tr...@ti.com
---
common/env_mmc.c | 37
This mainly converts the am335x_spl_bch driver to the normal format
which means a slight change to nand_info within the driver.
Cc: Scott Wood scottw...@freescale.com
Signed-off-by: Tom Rini tr...@ti.com
---
drivers/mtd/nand/am335x_spl_bch.c | 54 ++---
We use the same variable as a3m071 in the environment to determine if we
should boot into Linux or U-Boot. This is useful on boards like
Beaglebone Black or AM335x GP EVM where we have persistent storage for
the environment.
Signed-off-by: Tom Rini tr...@ti.com
---
board/ti/am335x/board.c |
Cc: Scott Wood scottw...@freescale.com
Signed-off-by: Tom Rini tr...@ti.com
---
drivers/mtd/nand/Makefile |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 366dee6..bb5b29d 100644
--- a/drivers/mtd/nand/Makefile
+++
Signed-off-by: Tom Rini tr...@ti.com
---
doc/README.falcon |9 +
1 file changed, 9 insertions(+)
diff --git a/doc/README.falcon b/doc/README.falcon
index 6357b1e..bccf6c9 100644
--- a/doc/README.falcon
+++ b/doc/README.falcon
@@ -80,6 +80,15 @@ spl_start_uboot() : required
We add two new environment variables, falcon_args_file and
falcon_image_file, which when set will override the compiled in default
values for falcon mode.
Signed-off-by: Tom Rini tr...@ti.com
---
common/spl/spl_mmc.c | 28 +++-
doc/README.falcon|4
2 files
Signed-off-by: Tom Rini tr...@ti.com
---
README |4
1 file changed, 4 insertions(+)
diff --git a/README b/README
index 20ba650..ce8fb37 100644
--- a/README
+++ b/README
@@ -3031,6 +3031,10 @@ FIT uImage format:
supports MMC, NAND and YMODEM loading of U-Boot and NAND
This change makes the behaviour slightly more rebust and will match
other implementations which can use getenv_yesno directly.
Cc: Stefan Roese s...@denx.de
Signed-off-by: Tom Rini tr...@ti.com
---
board/a3m071/a3m071.c |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git
On 9/26/2013 1:22 PM, Marek Vasut wrote:
Dear Troy Kisky,
Hi Marek
I thought you might like to be aware of this error, if not already known.
Known, when building for MXS (mx23 and mx28), you need libssl-dev installed
(openssl development libs and headers). Same rule applies when you use
On Thu, 2013-09-26 at 16:28 -0400, Tom Rini wrote:
This mainly converts the am335x_spl_bch driver to the normal format
which means a slight change to nand_info within the driver.
Cc: Scott Wood scottw...@freescale.com
Signed-off-by: Tom Rini tr...@ti.com
---
On Thu, 2013-09-26 at 16:28 -0400, Tom Rini wrote:
Cc: Scott Wood scottw...@freescale.com
Signed-off-by: Tom Rini tr...@ti.com
---
drivers/mtd/nand/Makefile |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 366dee6..bb5b29d
On Thu, 2013-09-26 at 12:57 -0700, York Sun wrote:
On 09/26/2013 12:55 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 12:48 -0700, York Sun wrote:
On 09/26/2013 12:46 PM, Sharma Bhupesh-B45370 wrote:
-Original Message-
From: u-boot-boun...@lists.denx.de
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 09/26/2013 04:42 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 16:28 -0400, Tom Rini wrote:
Cc: Scott Wood scottw...@freescale.com
Signed-off-by: Tom Rini tr...@ti.com
---
drivers/mtd/nand/Makefile |1 +
1 file changed, 1 insertion(+)
On 09/26/2013 01:44 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 12:57 -0700, York Sun wrote:
On 09/26/2013 12:55 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 12:48 -0700, York Sun wrote:
On 09/26/2013 12:46 PM, Sharma Bhupesh-B45370 wrote:
-Original Message-
From:
On Thu, 2013-09-26 at 13:46 -0700, York Sun wrote:
On 09/26/2013 01:44 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 12:57 -0700, York Sun wrote:
On 09/26/2013 12:55 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 12:48 -0700, York Sun wrote:
On 09/26/2013 12:46 PM, Sharma Bhupesh-B45370 wrote:
Am 2013-08-07 10:15, schrieb Andrzej Telszewski:
Hi,
I'm trying to get the U-Boot running on the Iris board with the
Toradex Colibri T20 module. I was able to flash the U-Boot and it
starts but then immediately stops with the only message being:
U-Boot 2013.07 (Aug 06 2013 - 17:47:43)
On Thu, 2013-09-26 at 16:45 -0400, Tom Rini wrote:
On 09/26/2013 04:42 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 16:28 -0400, Tom Rini wrote:
Cc: Scott Wood scottw...@freescale.com
Signed-off-by: Tom Rini tr...@ti.com
---
drivers/mtd/nand/Makefile |1 +
1 file changed, 1
On Thu, 2013-09-26 at 16:49 -0400, Tom Rini wrote:
On 09/26/2013 04:44 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 12:57 -0700, York Sun wrote:
On 09/26/2013 12:55 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 12:48 -0700, York Sun wrote:
On 09/26/2013 12:46 PM, Sharma Bhupesh-B45370 wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 09/26/2013 04:59 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 16:49 -0400, Tom Rini wrote:
On 09/26/2013 04:44 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 12:57 -0700, York Sun wrote:
On 09/26/2013 12:55 PM, Scott Wood wrote:
On Thu, 2013-09-26
On 09/26/2013 02:03 PM, Tom Rini wrote:
On 09/26/2013 04:59 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 16:49 -0400, Tom Rini wrote:
On 09/26/2013 04:44 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 12:57 -0700, York Sun wrote:
On 09/26/2013 12:55 PM, Scott Wood wrote:
On Thu, 2013-09-26 at
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 09/26/2013 04:51 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 16:45 -0400, Tom Rini wrote:
On 09/26/2013 04:42 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 16:28 -0400, Tom Rini wrote:
Cc: Scott Wood scottw...@freescale.com
Signed-off-by: Tom
On Thu, 2013-09-26 at 14:07 -0700, York Sun wrote:
On 09/26/2013 02:03 PM, Tom Rini wrote:
On 09/26/2013 04:59 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 16:49 -0400, Tom Rini wrote:
On 09/26/2013 04:44 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 12:57 -0700, York Sun wrote:
On
On 09/26/2013 02:26 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 14:07 -0700, York Sun wrote:
On 09/26/2013 02:03 PM, Tom Rini wrote:
On 09/26/2013 04:59 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 16:49 -0400, Tom Rini wrote:
On 09/26/2013 04:44 PM, Scott Wood wrote:
On Thu, 2013-09-26 at
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 09/26/2013 05:32 PM, York Sun wrote:
On 09/26/2013 02:26 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 14:07 -0700, York Sun wrote:
On 09/26/2013 02:03 PM, Tom Rini wrote:
On 09/26/2013 04:59 PM, Scott Wood wrote:
On Thu, 2013-09-26 at 16:49
Hi Jagan,
On Tue, Sep 24, 2013 at 12:20 PM, Jagannadha Sutradharudu Teki
jagannadha.sutradharudu-t...@xilinx.com wrote:
This patch provides support to set the quad enable bit on flash.
quad enable bit needs to set before performing any quad IO
operations on respective SPI flashes.
Hi Jagan,
On Tue, Sep 24, 2013 at 12:19 PM, Jagannadha Sutradharudu Teki
jagannadha.sutradharudu-t...@xilinx.com wrote:
This patch series is a combination of
sf: Add common probe support
sf: Add support for extended/quad read and write commands
Hi Jagan,
On Tue, Sep 24, 2013 at 12:19 PM, Jagannadha Sutradharudu Teki
jagannadha.sutradharudu-t...@xilinx.com wrote:
Added proper comment style on spi_flash structure to make
more readable.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v4:
- none
Hi Jagan,
On Tue, Sep 24, 2013 at 12:19 PM, Jagannadha Sutradharudu Teki
jagannadha.sutradharudu-t...@xilinx.com wrote:
Added S25FL* parts are which are avilable in spi_flash_probe_legacy.c.
Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for
This supports i2c controller for Renesas rcar.
Signed-off-by: Hisashi Nakamura hisashi.nakamura...@renesas.com
Signed-off-by: Nobuhiro Iwamatsu nobuhiro.iwamatsu...@renesas.com
---
drivers/i2c/Makefile | 1 +
drivers/i2c/rcar_i2c.c | 289 +
2
On Tue, Sep 24, 2013 at 11:53 AM, Julius Werner jwer...@chromium.org wrote:
The EHCI controller has some very specific requirements for the USB 2.0
port test modes, which were not closely followed in the initial test
mode commit. It demands that the host controller is completely shut down
(all
From: Fabio Estevam fabio.este...@freescale.com
Add basic support for mx6q udoo board.
For further information about Udoo board:
http://www.udoo.org/
Tested booting a mainline device tree kernel and a Yocto rootfs from mmc.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Hello Tom.
The problem here is that except for whatever arches don't support
- -fstack-usage, we always want to generate this information, to assist in
debugging stack usage problems (which can be a real problem within SPL
for example). How about ifneq($(CONFIG_M68K)$(CONFIG_...),y) ...
From: Fabio Estevam fabio.este...@freescale.com
Wandboard quad was not ported into U-boot at the time of writing the README.
Add it to the list of Wandboard variants.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
board/wandboard/README | 4 ++--
1 file changed, 2 insertions(+),
Hello Michal
Please remove microblaze from this list.
Our gcc support fstack-usage.
I will. Thanks for helpful information!
If your microblaze gcc doesn't support this flag
then upgrade gcc version.
I tested microblaze-linux-gcc 4.8.0
I downloaded from
Hello Nobuhiro,
Am 27.09.2013 01:21, schrieb Nobuhiro Iwamatsu:
This supports i2c controller for Renesas rcar.
Signed-off-by: Hisashi Nakamurahisashi.nakamura...@renesas.com
Signed-off-by: Nobuhiro Iwamatsunobuhiro.iwamatsu...@renesas.com
---
drivers/i2c/Makefile | 1 +
From: Scott Wood [mailto:scottw...@freescale.com]
On Thu, 2013-09-26 at 13:14 +, Gupta, Pekon wrote:
From: Gupta, Pekon pe...@ti.com
NAND driver needs to know bus-width of the connected NAND device,
in
order to perform proper I/O and initialize itself. Currently there is no
Hi, Heiko.
Thank you for your review.
(2013/09/27 12:37), Heiko Schocher wrote:
Hello Nobuhiro,
Am 27.09.2013 01:21, schrieb Nobuhiro Iwamatsu:
This supports i2c controller for Renesas rcar.
Signed-off-by: Hisashi Nakamurahisashi.nakamura...@renesas.com
Signed-off-by: Nobuhiro
Hi Pantelis,
If Jaehoon Chung has no comments we can go with the same patch.
@Jaehoon: do let me know if any better suggestions.
Regards,
Rajeshwari
On Tue, Sep 17, 2013 at 8:57 PM, Pantelis Antoniou
pa...@antoniou-consulting.com wrote:
Hi Rajesh,
I guess we wait for an updated patch here?
98 matches
Mail list logo
