Dear David,
In message 0579e649-f359-415b-a8ed-e1d4267f8...@phytium.com.cn you wrote:
And if any text base alignment is less than the image's maximum
alignment requirement, the load will fail, and then we likely scratch
our heads and set the CONFIG_SYS_TEXT_BASE alignment higher until it
Hi,
I am trying to load and execute the hello world standalone app on the
arndale exynos 5250. I created an image using the mkimage tool and then used
the bootm to load and execute the image. However, the applications does not
print anything on the terminal and all what I can see is the
Hi Mateusz,
On Apr 29, 2014, at 9:15 PM, Mateusz Zalega wrote:
mmc_init() doesn't call get_timer() anymore if MMC is already
initialized.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Pantelis Antoniou pa...@antoniou-consulting.com
---
Detached from earlier DFU, MMC, Gadget,
Hi Hannes,
On Apr 8, 2014, at 9:39 AM, Hannes Petermaier wrote:
Since BR boards uses only MMC-Controller #1, it only
wastes time if we initialize #0 first to see that there is nothing.
Cc: tr...@ti.com
Signed-off-by: Hannes Petermaier oe5...@oevsv.at
---
board/BuR/common/common.c |7
Hi Frank,
On Apr 11, 2014, at 6:35 PM, Frank Bormann wrote:
Hi Pantos, hi Tom,
I sent this a couple of months ago to the mailing list, never really received
a response. We are testing 2014.04-rc3 right now and the issue is still
there. Would you still consider bringing this fix in for
Hi Andrew,
On Apr 3, 2014, at 12:34 PM, Andrew Gabbasov wrote:
MMC switch command for unsupported feature (e.g. bus width) sets a switch
error bit in card status. This bit should be checked, and, if it's set,
no access with new controller settings should be performed.
Signed-off-by: Andrew
Hi Pierre,
On Apr 24, 2014, at 11:30 AM, Pierre Aubert wrote:
This patch adds functions for read, write and authentication
key programming for the Replay Protected Memory Block partition
in the eMMC.
Signed-off-by: Pierre Aubert p.aub...@staubli.com
CC: Pantelis Antoniou
Hi Pierre,
On Apr 24, 2014, at 11:30 AM, Pierre Aubert wrote:
User's confirmation is asked in different commands. This commit adds a
function for such confirmation.
Signed-off-by: Pierre Aubert p.aub...@staubli.com
---
V3, V4, V5: no changes
Patch added in V2
common/cmd_fuse.c |
Hi Stephen,
On May 7, 2014, at 9:19 PM, Stephen Warren wrote:
From: Stephen Warren swar...@nvidia.com
All the sub-commands start with the main command anme, but it was
anme=name
missing from one of the help texts.
Signed-off-by: Stephen Warren swar...@nvidia.com
---
common/cmd_part.c
Hi Stephen,
On May 7, 2014, at 9:19 PM, Stephen Warren wrote:
From: Stephen Warren swar...@nvidia.com
Some device types (e.g. eMMC) have hardware-level partitions (for eMMC,
separate boot and user data partitions). This change allows the user to
specify the HW partition they wish to access
Hi Stephen,
On May 7, 2014, at 9:19 PM, Stephen Warren wrote:
From: Stephen Warren swar...@nvidia.com
This enables specifying which eMMC HW partition to target for any U-Boot
command that uses the generic get_partition() function to parse its
command-line arguments.
Signed-off-by:
Hi Stephen,
On May 7, 2014, at 9:19 PM, Stephen Warren wrote:
From: Stephen Warren swar...@nvidia.com
The implementation of mmc_select_hwpart() was cribbed from do_mmcops().
Update do_mmcops() to call mmc_select_hwpart() to avoid duplication.
Signed-off-by: Stephen Warren
Hi Tom,
The following changes since commit d7782d06534fe4fa47a49fa7c106de5ba85a9687:
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-16
18:30:33 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to
Is it possible to load a bare-metal standalone application by using uboot,
and let the standalone app load a kernel and FS, could you please propose a
hint on how to it?
Many thanks.
--
View this message in context:
http://u-boot.10912.n7.nabble.com/Uboot-standalone-kernel-tp180527.html
Hi Darwin,
-Original Message-
From: Darwin Rambo [mailto:dra...@broadcom.com]
Sent: Tuesday, March 25, 2014 12:46 AM
To: u-boot@lists.denx.de
Cc: Darwin Rambo; Albert Aribaud; Tom Rini; feng...@phytium.com.cn;
Sharma Bhupesh-B45370
Subject: [PATCH v3] arm: Add support for
Dear mazen.e,
In message 1400831110428-180515.p...@n7.nabble.com you wrote:
I am trying to load and execute the hello world standalone app on the
arndale exynos 5250. I created an image using the mkimage tool and then used
the bootm to load and execute the image. However, the applications
In 7168977 we made calls to check_and_invalidate_dcache_range()
conditional on !CONFIG_SYS_FSL_ESDHC_USE_PIO. Only define this function
in this case as well.
Signed-off-by: Tom Rini tr...@ti.com
---
drivers/mmc/fsl_esdhc.c |3 +++
1 file changed, 3 insertions(+)
diff --git
On Fri, May 23, 2014 at 09:20:53AM -0400, Tom Rini wrote:
In 7168977 we made calls to check_and_invalidate_dcache_range()
conditional on !CONFIG_SYS_FSL_ESDHC_USE_PIO. Only define this function
in this case as well.
Signed-off-by: Tom Rini tr...@ti.com
Applied to u-boot/master, thanks!
On Fri, May 23, 2014 at 12:37:06PM +0300, Pantelis Antoniou wrote:
Hi Tom,
The following changes since commit d7782d06534fe4fa47a49fa7c106de5ba85a9687:
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-16
18:30:33 -0400)
are available in the git repository at:
On 05/23/2014 03:21 AM, Pantelis Antoniou wrote:
Hi Stephen,
On May 7, 2014, at 9:19 PM, Stephen Warren wrote:
This enables specifying which eMMC HW partition to target for any U-Boot
command that uses the generic get_partition() function to parse its
command-line arguments.
Applied, but
Hi Stephen,
On May 23, 2014, at 6:58 PM, Stephen Warren wrote:
On 05/23/2014 03:21 AM, Pantelis Antoniou wrote:
Hi Stephen,
On May 7, 2014, at 9:19 PM, Stephen Warren wrote:
This enables specifying which eMMC HW partition to target for any U-Boot
command that uses the generic
On Fri, Apr 25, 2014 at 12:09 AM, Andrew Ruder
andrew.ru...@elecsyscorp.com wrote:
This mirrors the conventions used in other SPI drivers (kirkwood,
davinci, atmel, et al) where the din/dout buffer can be NULL when the
received/transmitted data isn't important. This reduces the need for
On Tue, May 6, 2014 at 5:10 PM, Michal Simek mon...@monstr.eu wrote:
Hi Jagan,
On 04/25/2014 03:47 PM, Michal Simek wrote:
From: Siva Durga Prasad Paladugu siva.durga.palad...@xilinx.com
Added support for Spansion chip S25FL512S_512K.
Signed-off-by: Siva Durga Prasad Paladugu
On 05/23/2014 03:24 AM, Pantelis Antoniou wrote:
Hi Stephen,
On May 7, 2014, at 9:19 PM, Stephen Warren wrote:
From: Stephen Warren swar...@nvidia.com
The implementation of mmc_select_hwpart() was cribbed from do_mmcops().
Update do_mmcops() to call mmc_select_hwpart() to avoid
On Wed, Apr 23, 2014 at 6:57 PM, Sourav Poddar sourav.pod...@ti.com wrote:
Currently, flash quad bit is set in spi_flash_validate_params and later
at the end in the same api, we write 0 to status register for few flashes,
thereby overriding the quad bit set. This fix moves the quad bit setting
Hi Bhupesh,
I believe that this patch is now stale, because other changes to
boards.cfg and vexpress_aemv8a.h were done after this patch was
submitted. So it doesn't apply cleanly anymore and needs to be
regenerated. In the meantime can you remove this patch from your world
since I believe
From: Stephen Warren swar...@nvidia.com
Rather than just returning -1 everywhere, try to return something
meaningful from mmc_select_hwpart(). Note that most other MMC functions
don't do this, including functions called from mmc_select_hwpart(), so
I'm not sure how effective this will be. Still,
From: Stephen Warren swar...@nvidia.com
Currently, get_device()/get_dev_hwpart() for MMC devices does not select
an explicit HW partition unless the user explicitly requests one, i.e. by
requesting device mmc 0.0 rather than just mmc 0. I think it makes
more sense if the default is to select HW
From: Stephen Warren swar...@nvidia.com
Currently, mmc dev 0 does not change the selected HW partition. I
think it makes more sense if mmc dev 0 is an alias for mmc dev 0 0,
i.e. that HW partition 0 (main data area) is always selected by default
if the user didn't request a specific partition.
On 05/20/2014 10:57 AM, Stephen Warren wrote:
From: Bryan Wu coolo...@gmail.com
mmc dev ${devnum} will return 0 as success even if there is no card
inserted. Booting script like tegra-common-post.h will call mmc dev
${devnum} to check the mmc device status, it always return 0 even if
From: Stephen Warren swar...@nvidia.com
Currently, U-Boot behaves as follows:
- Begin with no SD card inserted in mmc 1
- Execute: mmc dev 1
- This fails, since there is no card
- User plugs in an SD card
- Execute: mmc dev 1
- This still fails, since the HW isn't reprobed.
With this change,
From: Stephen Warren swar...@nvidia.com
This allows callers to inject mmc-has_init = 0 between finding the
MMC device, and calling mmc_init(), which forces mmc_init() to rescan
the HW. Future changes will use this feature.
Signed-off-by: Stephen Warren swar...@nvidia.com
---
common/cmd_mmc.c |
From: Stephen Warren swar...@nvidia.com
The body of init_mmc_device() is now identical to that of do_mmc_rescan()
except for the error codes returned. Modify do_mmc_rescan() to simply
call init_mmc_device() and convert the error codes, to avoid code
duplication.
Signed-off-by: Stephen Warren
When the DDR controller is initialized below a junction temperature of
0°C and then operated above a junction temperature of 65°C, the DDR
controller may cause receive data errors, resulting ECC errors and/or
corrupted data. This erratum applies to the following SoCs and their
variants: MPC8536,
On Thu, May 15, 2014 at 02:42:11PM -0600, Simon Glass wrote:
This is currently the only x86 board.
Signed-off-by: Simon Glass s...@chromium.org
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot
On Thu, May 22, 2014 at 03:26:55PM +0200, Łukasz Majewski wrote:
Entry for dfu subsystem have been added to doc/git-mailrc file
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
On Fri, May 16, 2014 at 12:54:17PM +0400, Alexey Brodkin wrote:
In case of multilib-enabled toolchains if default architecture differ from
the one examples are being built for linker will fail to link example object
files with libgcc of another (non-compatible) architecture.
Interesting
Hi Heiko,
On 22 May 2014 17:56, Heiko Schocher h...@denx.de wrote:
Hello Simon,
Am 22.05.2014 22:34, schrieb Simon Glass:
+Tom
Hi Heiko,
On 22 May 2014 00:43, Heiko Schocherh...@denx.de wrote:
using UBI and DM together leads in compiler error, as
both define a struct device, so
Hi Akshay,
On 21 May 2014 23:23, Akshay Saraswat aksha...@samsung.com wrote:
While the Exynos5420 chip is used in both Smdk5420 and in the Peach-Pit
line of devices, there could be other boards using the same chip, so a
common configuration file is being added (exynos5420.h) as well
as two
Hi Akshay,
On 21 May 2014 23:23, Akshay Saraswat aksha...@samsung.com wrote:
This board is based on Exynos5420 and is similar to SMDK5420 board.
Adding new and refactoring existing DT and config files to support
both SMDK5420 and Peach-Pit.
Changes since v1:
- Added Acked-by.
One
Hi Akshay,
On 21 May 2014 23:32, Akshay Saraswat aksha...@samsung.com wrote:
Passing fewer arguments is better and mem_iv_size is never
used. Let's keep only one argument and make it cleaner.
I agree with removing mem_iv_size as it is not used. But all you are
doing with the other parameter is
Hi Akshay,
On 21 May 2014 23:33, Akshay Saraswat aksha...@samsung.com wrote:
This patch intends to remove all code which enables hardware read
leveling. All characterization environments may not cope up with
h/w read leveling enabled, hence, we need to disable this.
Also, disabling h/w read
On 21 May 2014 23:33, Akshay Saraswat aksha...@samsung.com wrote:
From: Doug Anderson diand...@chromium.org
From experiments it appears that PHY_CON13 is glitchy if we sample it
when CLKM is running. If we stop CLKM when sampling it the glitches
all go away, so we'll do that.
We also check
Hi Akshay,
On 21 May 2014 23:33, Akshay Saraswat aksha...@samsung.com wrote:
Sometimes Read DQ and DQS are not in phase. Since, this
phase shift differs from board to board, we need to
calibrate it at DRAM init phase, that's read DQ calibration.
This patch adds SW Read DQ calibration routine
The reason for this change is to be able to use the ARM Trusted Firmware
(ATF) to load the various ATF images, plus u-boot, which can then load
the kernel/ramdisk/dtb with calls to an external host from a standard
fastmodel armv8 board file using semihosting, and then launch the kernel
without a
On Sun, Apr 27, 2014 at 01:18:46PM +0300, Dmitry Lifshitz wrote:
cm-t54 Eth MAC address is stored in onboard EEPROM.
Add EEPROM support and setup stored Eth MAC address.
If EEPROM does not contain a valid MAC, then generate it from the
processor ID code (reference code is taken from OMAP5
On Thu, May 08, 2014 at 09:43:45PM +0530, pekon gupta wrote:
This patch moves platform specific information for GPMC and ELM controller
into separate header files, so that any derivative devices do not mess other
header files.
Platform specific information added into arch-xx/../hardware.h
On Sun, Apr 27, 2014 at 01:18:48PM +0300, Dmitry Lifshitz wrote:
Add environment partition runtime detection callback.
Signed-off-by: Dmitry Lifshitz lifsh...@compulab.co.il
Acked-by: Igor Grinberg grinb...@compulab.co.il
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
On Thu, May 15, 2014 at 11:08:38AM +0530, Lokesh Vutla wrote:
Add silicon ID code for DRA722 silicon.
Signed-off-by: Lokesh Vutla lokeshvu...@ti.com
Acked-by: Tom Rini tr...@ti.com
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
Description: Digital signature
On Wed, May 14, 2014 at 12:40:27PM +0200, Heiko Schocher wrote:
Signed-off-by: Heiko Schocher h...@denx.de
Cc: Tom Rini tr...@ti.com
Cc: Samuel Egli samuel.e...@siemens.com
Cc: Roger Meier r.me...@siemens.com
Tested-by: Samuel Egli samuel.e...@siemens.com
Applied to u-boot-ti/master,
On Thu, May 08, 2014 at 09:43:46PM +0530, pekon gupta wrote:
This patch moves platform specific information for GPMC and ELM controller
into separate header files, so that any derivative devices do not mess other
header files.
Platform specific information added into arch-xx/../hardware.h
On Mon, May 12, 2014 at 01:49:33PM +0530, Lokesh Vutla wrote:
Last section of DMM is used for trapping tiler unmapped sections.
Corresponding trap_size should be deducted from total SDRAM size
only if trap section is overlapping with available SDRAM
based on DMM sections. Fixing the same.
On Thu, May 15, 2014 at 11:08:39AM +0530, Lokesh Vutla wrote:
From: Keerthy j-keer...@ti.com
TPS65917 is used in DRA722 evm. Update the address offsets accordingly.
Signed-off-by: Lokesh Vutla lokeshvu...@ti.com
Signed-off-by: Keerthy j-keer...@ti.com
Acked-by: Tom Rini tr...@ti.com
On Thu, May 15, 2014 at 11:08:40AM +0530, Lokesh Vutla wrote:
Adding the prcm, dplls, control module hooks for DRA72x.
Signed-off-by: Lokesh Vutla lokeshvu...@ti.com
Acked-by: Tom Rini tr...@ti.com
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
Description: Digital signature
On Thu, May 15, 2014 at 11:08:42AM +0530, Lokesh Vutla wrote:
Efuse register addresses are wrongly programmed.
Fixing the same.
Signed-off-by: Lokesh Vutla lokeshvu...@ti.com
Acked-by: Tom Rini tr...@ti.com
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
Description: Digital
On Thu, May 15, 2014 at 11:08:41AM +0530, Lokesh Vutla wrote:
DRA72 has 1GB connected to EMIF1 only. Updating the details.
And also enable WA for BUG0039 only if corresponding EMIF is present.
Signed-off-by: Lokesh Vutla lokeshvu...@ti.com
Acked-by: Tom Rini tr...@ti.com
Applied to
On Mon, May 19, 2014 at 12:50:54PM +0300, Dmitry Lifshitz wrote:
Add cm-t54 board directory, config file. Enable build.
Basic support includes:
Serial console
SD/MMC
eMMC
USB
Ethernet
Signed-off-by: Dmitry Lifshitz lifsh...@compulab.co.il
Acked-by: Igor Grinberg
On Thu, May 15, 2014 at 11:25:09AM +0300, Igor Grinberg wrote:
Add default eeprom address setting.
Signed-off-by: Igor Grinberg grinb...@compulab.co.il
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
On Fri, May 16, 2014 at 01:02:24PM -0400, Tom Rini wrote:
The omap_hw_init_context function (and assorted helpers) is the same for
all OMAP-derived parts as when CHSETTINGS are used, that's the same and
our DDR base is also always the same. In order to make this common we
simply need to
On Wed, May 21, 2014 at 02:04:47PM -0700, Ash Charles wrote:
Adapted from d70f5480 described below.
commit d70f54808dfa83b574e1239c3eccbcf3317343e1
Author: Javier Martinez Canillas jav...@dowhile0.org
Date: Mon Jan 7 03:51:20 2013 +
omap4: allow the use of a plain
On Wed, May 21, 2014 at 02:04:48PM -0700, Ash Charles wrote:
The NAND linux partition format default was changed from jffs2 to ubi in
254973e6df0e48f1a72b67905185c774dcd9f394 but the corresponding commands were
not enabled.
Signed-off-by: Peter A. Bigot p...@pabigot.com
Tested-by: Ash
On Wed, May 21, 2014 at 02:04:50PM -0700, Ash Charles wrote:
The linux kernel is at nand0,3 using the current layout, but is best
accessed through the partition label linux. Since CONFIG_CMD_MTDPARTS is
defined the CONFIG_JFFS2 settings are unreferenced; use setenv partition
rootfs to set
On Wed, May 21, 2014 at 02:04:51PM -0700, Ash Charles wrote:
Patch f33b9bd3
[arm: omap3: Enable clocks for peripherals only if they are used]
breaks SPL booting on Overo. Since some gpio inputs are
read to detect the board revision. But with this patch above, the
clocks to the GPIO
On Wed, May 21, 2014 at 02:04:49PM -0700, Ash Charles wrote:
From: Peter A. Bigot p...@pabigot.com
Linux kernel at version 3.5 is about 3.5 MiB; test kernels for 3.10 exceed 4
MiB. Prepare for future upgrades by increasing the NAND partition now.
Signed-off-by: Peter A. Bigot
On Wed, May 21, 2014 at 02:04:54PM -0700, Ash Charles wrote:
Update the board configuration for Gumstix Overo. In particular,
add support for zImage and DTB files on boot.
Signed-off-by: Ash Charles ashchar...@gmail.com
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
On Wed, May 21, 2014 at 02:04:52PM -0700, Ash Charles wrote:
Gumstix Overo COMs with board revision 0x4 use a different Wifi and
Bluetooth module: Wi2Wi's W2CBW0015. No other code changes are required
in u-boot---just handling of this particular board revision.
Signed-off-by: Ash Charles
On Wed, May 21, 2014 at 02:04:53PM -0700, Ash Charles wrote:
Add EEPROM ID switches for Alto35, Arbor43C, Stagecoach, Thumbo, and
Turtlecore Gumstix Overo expansion boards.
Signed-off-by: Ash Charles a...@gumstix.com
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
Description:
On Wed, May 21, 2014 at 02:04:55PM -0700, Ash Charles wrote:
Clean-up the board configuration file for the Gumstix Overo board by
including common omap3 definitions from ti_omap3_common.h as suggested
here [1].
[1] http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/185960
On Thu, May 22, 2014 at 11:56:03AM +0400, Sergey Alyoshin wrote:
As revision code 1 is for silicon revision 2.0, it is easily confused with
silicon revision 1.0.
Device type report also reworked in same style.
Signed-off-by: Sergey Alyoshin alyoshi...@gmail.com
Applied to
On Wed, Apr 16, 2014 at 01:48:26PM +0300, Ilya Ledvich wrote:
Make the common eeprom library available for any I2C driver.
Signed-off-by: Ilya Ledvich i...@compulab.co.il
Signed-off-by: Igor Grinberg grinb...@compulab.co.il
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
On Wed, May 14, 2014 at 08:34:34AM -0700, Ash Charles wrote:
This adds the Gumstix DuoVero machine [1]. This is a OMAP4430-based
computer-on-module (COM aka SOM) that can be mounted on various
expansion boards with different peripherals.
[1] https://store.gumstix.com/index.php/category/43/
Hello,
The following changes since commit 05d134b084590684bcf4d832c0035952727b7cd9:
Merge remote-tracking branch 'u-boot/master' (2014-05-20 10:05:42 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
for you to fetch changes up to
On Thu, May 08, 2014 at 09:43:47PM +0530, pekon gupta wrote:
GPMC controller on TI's OMAP SoC is general purpose controller to interface
with different types of external devices like;
- parallel NOR flash
- parallel NAND flash
- OneNand flash
- SDR RAM
- Ethernet Devices like LAN9220
Hi Heiko,
On 19 May 2014 20:49, Heiko Schocher h...@denx.de wrote:
make the use of legacy image format configurable through
the config define CONFIG_IMAGE_FORMAT_LEGACY.
When relying on signed FIT images with required signature check
the legacy image format should be disabled. Therefore
Hi,
On 21 May 2014 15:12, Simon Glass s...@chromium.org wrote:
Hi Harsha,
On 21 May 2014 06:46, Harsha Kiran harshakiran...@gmail.com wrote:
Hi Simon,
I have added the next patch in the series i.e., (../339610/) But the
result is still the same. This particular patch just created a
Hi Heiko,
On 18 May 2014 19:10, Heiko Schocher h...@denx.de wrote:
move fdtdec_get_int() out of lib/fdtdec.c into lib/fdtdec_common.c
as this function is also used, if CONFIG_OF_CONTROL is not
used. Poped up on the ids8313 board using signed FIT images,
and activating
On 22 May 2014 01:53, Akshay Saraswat aksha...@samsung.com wrote:
From: Doug Anderson diand...@chromium.org
Setting ps_hold ought to be one of the first things we do when we
first boot up. If we wait until the main u-boot runs we won't set it
in time and the PMIC may power us back off.
Hi Lukasz,
On 22 May 2014 00:43, Lukasz Majewski l.majew...@samsung.com wrote:
This commit adds test script for testing if any commit has introduced
regression to the DFU.
It uses md5 to test if sent and received file is correct.
The test detailed description is available at DESCRIPTION.TXT
On 17 April 2014 22:40, Masahiro Yamada yamad...@jp.panasonic.com wrote:
gd-bd is not used in fdt_support.c.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Acked-by: Simon Glass s...@chromium.org
___
U-Boot mailing list
U-Boot@lists.denx.de
Hi Masahiro,
On 17 April 2014 22:40, Masahiro Yamada yamad...@jp.panasonic.com wrote:
Some functions in fdt_support.c do the same routine:
search a node with a given name (chosen, memory, etc.)
or newly create it if it does not exist.
So this commit makes that routine to a helper function.
On 17 April 2014 22:40, Masahiro Yamada yamad...@jp.panasonic.com wrote:
After all, we have realized force argument is completely
useless. fdt_initrd() was always called with force = 1.
We should always want to do the same thing
(set appropriate value to the property)
even if the property
On 17 April 2014 22:41, Masahiro Yamada yamad...@jp.panasonic.com wrote:
After all, we have realized force argument is completely
useless. fdt_chosen() was always called with force = 1.
We should always want to do the same thing
(set appropriate value to the property)
even if the property
On 17 April 2014 22:41, Masahiro Yamada yamad...@jp.panasonic.com wrote:
- Do not use a deep indentation. We have only 80-character
on each line and 1 indentation consumes 8 spaces. Before the
code moves far to the right, you should consider to
fix your code. See Linux
On 17 April 2014 22:41, Masahiro Yamada yamad...@jp.panasonic.com wrote:
In the next commit, I will add a new function, fdt_pack_reg()
which uses get_cells_len().
Beforehand, this commit adds 'const' qualifier to get_cells_len().
Otherwise, a warning message will appear:
warning: passing
On 17 April 2014 22:41, Masahiro Yamada yamad...@jp.panasonic.com wrote:
Data written to DTB must be converted to big endian order.
It is usually done by using cpu_to_fdt32(), cpu_to_fdt64(), etc.
fdt_fixup_memory_banks() invoked write_cell(), which always
swaps byte order.
It means the
On 17 April 2014 22:41, Masahiro Yamada yamad...@jp.panasonic.com wrote:
Data written to DTB must be converted to big endian order.
It is usually done by using cpu_to_fdt32(), cpu_to_fdt64(), etc.
fdt_initrd() invoked write_cell(), which always swaps byte order.
It means the function only
On 17 April 2014 22:41, Masahiro Yamada yamad...@jp.panasonic.com wrote:
Before this commit, fdt_initrd() just returned if initrd
start address is zero.
But it is possible if the RAM is located at address 0.
This commit makes the return condition more reasonable:
Just return if the size of
+Masahiro
Hi Jeroen,
On 9 May 2014 12:31, Jeroen Hofstee dasub...@myspectrum.nl wrote:
Hello,
tools/Makefile uses the following substitution
HOST_EXTRACFLAGS += -include $(srctree)/include/libfdt_env.h \
$(patsubst -I%,-idirafter%, $(UBOOTINCLUDE)) \
...
Hi Rommel,
On 12 May 2014 18:46, Rommel G Custodio sessyargc+u-b...@gmail.com wrote:
Dear Simon Glass,
Simon Glass sjg at chromium.org writes:
Support the iotrace feature for sandbox, and enable it, using some dummy
I/O access methods.
Signed-off-by: Simon Glass sjg at chromium.org
---
Hi Tom,
On 21 May 2014 10:46, Tom Rini tr...@ti.com wrote:
On Wed, May 21, 2014 at 10:10:50PM +0200, Wolfgang Denk wrote:
Dear Tom Rini,
In message 20140521195824.GE1752@bill-the-cat you wrote:
Something that Rob mentioned to me at ELC, and others have mentioned
before is that it would
Hi Yegor,
On 20 May 2014 20:59, Yegor Yefremov yegorsli...@googlemail.com wrote:
I have following folder structure:
board/kernel_fdt.its
output/images/zImage
The kernel.its has following path for the zImage:
data = /incbin/(output/images/zImage);
When I invoke mkimage like this, it
In a few cases the behaviour of both the hush and built-in parsers seems
incorrect. One such case was exposed by commit 1992dbf which attempted to
execute a simple command using hush and get the correct return value.
Further digging exposed the other problems.
Simon Glass (4):
Add final result
run_command_list() is supposed to return a return code of 0 for success
and 1 for failure. Add a few simple tests that confirm this. These tests
work both with the built-in parser and hush.
Signed-off-by: Simon Glass s...@chromium.org
---
test/command_ut.c | 5 +
1 file changed, 5
The return code is not consistent with builtin_run_command_list(). For the
last command in a sequence, the return code is actually inverted.
Fix it.
Signed-off-by: Simon Glass s...@chromium.org
---
common/main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/main.c
When a simple command like 'false' is provided, hush should return the
result of that command. However, hush only does this if the
FLAG_EXIT_FROM_LOOP flag is provided. Without this flag, hush will
happily execute the empty string command immediate after 'false' and
then return a success code.
The mask value used in itest overflows and therefore it can return an
incorrect result for something like 'itest 0 == 1'. Fix it.
Signed-off-by: Simon Glass s...@chromium.org
---
common/cmd_itest.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/cmd_itest.c
96 matches
Mail list logo
