Hi Simon,
On Sun, 22 Jun 2014 22:54:43 -0600
Simon Glass s...@chromium.org wrote:
Hi,
On Jun 22, 2014 10:23 PM, Fabio Estevam feste...@gmail.com wrote:
On Mon, Jun 23, 2014 at 12:39 AM, Simon Glass s...@chromium.org wrote:
The whitespace problems are not common but they do happen
Hi Stephen,
On 06/20/2014 01:35 AM, Lukasz Majewski wrote:
diff --git a/common/cmd_thordown.c b/common/cmd_thordown.c
U_BOOT_CMD(thordown, CONFIG_SYS_MAXARGS, 1, do_thor_down,
TIZEN \THOR\ downloader,
- USB_controller interface dev\n
+ USB_controller interface dev
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
---
common/cmd_thordown.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/cmd_thordown.c b/common/cmd_thordown.c
index 2dd7509..96f7d32 100644
--- a/common/cmd_thordown.c
+++ b/common/cmd_thordown.c
@@ -64,7 +64,7 @@
Commit d4f5ef59cc7 dfu: defer parsing of device string to IO backend changed
the function signature of dfu_init_env_entities(). Adjust cmd_thordown.c
to match that change.
Also, apply the same change as commit d6d37d737b58e dfu: free entities
when parsing fails to cmd_thordown.c.
Fixes:
Commit d4f5ef59cc7 dfu: defer parsing of device string to IO backend changed
the function signature of dfu_init_env_entities(). Adjust cmd_thordown.c
to match that change.
Also, apply the same change as commit d6d37d737b58e dfu: free entities
when parsing fails to cmd_thordown.c.
Fixes:
On Monday, June 23, 2014 at 09:39:16 AM, Lukasz Majewski wrote:
Commit d4f5ef59cc7 dfu: defer parsing of device string to IO backend
changed the function signature of dfu_init_env_entities(). Adjust
cmd_thordown.c to match that change.
Also, apply the same change as commit d6d37d737b58e dfu:
On Monday, June 23, 2014 at 09:35:04 AM, Lukasz Majewski wrote:
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
---
common/cmd_thordown.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/cmd_thordown.c b/common/cmd_thordown.c
index 2dd7509..96f7d32 100644
On 19/06/14 05:13, Jeroen Hofstee wrote:
Since p-bus is unsigned checking for negative values
is optimized away. Since bus is already used as an argument
use tmp. While at it, don't declare variables in the middle
of a function.
cc: Rajeshwari Shinde rajeshwar...@samsung.com
Signed-off-by:
On 18/06/14 21:23, Akshay Saraswat wrote:
This board is based on Exynos5420 and is similar to SMDK5420 board.
Adding new and refactoring existing DT and config files to support
both SMDK5420 and Peach-Pit.
This patch set also intends to place env at the end of flash, increase
SPL
On 18/06/14 21:22, Akshay Saraswat wrote:
SPI recieve and transfer code in exynos_spi driver has a logical bug.
We read data in a variable which can hold an integer. Then we assign
this integer 32 bit value to another variable which has data type uchar.
Latter represents a unit of our recieve
Turn on generic board for the integrators, as per the request in
the startup message. Everything just works, tested on the
Integrator/AP and Integrator/CP.
Signed-off-by: Linus Walleij linus.wall...@linaro.org
---
include/configs/integrator-common.h | 1 +
1 file changed, 1 insertion(+)
diff
From: Bryan Wu pe...@nvidia.com
On Tegra114 and Tegra124 platforms, certain display-related registers cannot
be accessed unless the VPR registers are programmed. For bootloader, we
probably don't care about VPR, so we disable it (which counts as programming
it, and allows those display-related
On i.MX6 GPIOx_PSR does not reflect the current output value if the
direction is set to output. Instead we should read GPIOx_DR.
Signed-off-by: Klaus Goger klaus.go...@theobroma-systems.com
---
drivers/gpio/mxc_gpio.c | 10 +-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git
Hello expert.
I'm trying to run ARMv8 u-boot on fast model. Exactly on Coretex-A57×4 In
FVP_VE
When I run command model_shell64 cadi_system_Linux64-Release-GCC-4.6.so
u-boot.elf
There isn't any pop up xterm terminal.
My fast model version is 8.3 and I used vexpress_aemv8a configuration on
denx
Hello Stefano,
Am 17.06.2014 19:58, schrieb Stefano Babic:
Hi Markus,
On 17/06/2014 19:40, Markus Niebel wrote:
Is it not an attractive alternative for you ? Instead of having several
entries in boards.cfg for each variation of your board, you could have
maybe only one or a couple.
Sure
Dear all,
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
---
common/cmd_thordown.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/cmd_thordown.c b/common/cmd_thordown.c
index 2dd7509..96f7d32 100644
--- a/common/cmd_thordown.c
+++
Hi Markus,
On 23/06/2014 11:52, Markus Niebel wrote:
Hello Stefano,
Am 17.06.2014 19:58, schrieb Stefano Babic:
Hi Markus,
On 17/06/2014 19:40, Markus Niebel wrote:
Is it not an attractive alternative for you ? Instead of having several
entries in boards.cfg for each variation of your
On 06/18/2014 05:46 PM, Stephen Warren wrote:
On 06/18/2014 04:56 AM, Przemyslaw Marczak wrote:
On 06/17/2014 06:36 PM, Stephen Warren wrote:
...
I'd prefer that the dfu command didn't use any environment variables,
but rather required the user to always pass the list on the
command-line.
Hi Marek,
On Monday, June 23, 2014 at 09:39:16 AM, Lukasz Majewski wrote:
Commit d4f5ef59cc7 dfu: defer parsing of device string to IO
backend changed the function signature of dfu_init_env_entities().
Adjust cmd_thordown.c to match that change.
Also, apply the same change as commit
+Doug who may have some thoughts here.
HI Masahiro,
On 23 June 2014 00:28, Masahiro Yamada yamad...@jp.panasonic.com wrote:
Hi Simon,
On Sun, 22 Jun 2014 22:54:43 -0600
Simon Glass s...@chromium.org wrote:
Hi,
On Jun 22, 2014 10:23 PM, Fabio Estevam feste...@gmail.com wrote:
On
On 21 June 2014 22:33, Heiko Schocher h...@denx.de wrote:
- add CONFIG_SYS_GENERIC_BOARD
- remove CONFIG_OF_CONTROL to boot again
Signed-off-by: Heiko Schocher h...@denx.de
Acked-by: Kim Phillips kim.phill...@freescale.com
Cc: Simon Glass s...@chromium.org
Acked-by: Simon Glass
Hi Ajay,
On 20 June 2014 00:42, Ajay kumar ajayn...@gmail.com wrote:
Hi Simon,
On Fri, Jun 20, 2014 at 8:59 AM, Simon Glass s...@google.com wrote:
On 17 June 2014 03:06, Ajay Kumar ajaykumar...@samsung.com wrote:
On Exynos5420 and newer versions, the FIMD sysmmus are in
on state by
Hi Ajay,
On 20 June 2014 00:12, Ajay kumar ajayn...@gmail.com wrote:
Simon,
On Fri, Jun 20, 2014 at 9:08 AM, Simon Glass s...@chromium.org wrote:
Hi Ajay,
On 17 June 2014 03:06, Ajay Kumar ajaykumar...@samsung.com wrote:
Enable drivers for FIMD, DP and parade bridge chip.
Signed-off-by:
From: Fabio Estevam fabio.este...@freescale.com
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Changes since v2:
- Adjust CONFIG_LOADADDR
Changes since v1:
- Previous commit log belonged to 1/4 patch, so moved it to the correct patch
board/freescale/mx6sxsabresd/Makefile |
From: Fabio Estevam fabio.este...@freescale.com
mx6sx does not have sata nor ipu blocks, so do not handle such clocks.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Changes since v2:
- None
Changes since v1:
- None
arch/arm/cpu/armv7/mx6/clock.c | 8
1 file changed, 8
From: Fabio Estevam fabio.este...@freescale.com
mx6solox is the newest member of the mx6 family.
Some of the new features on this variants are:
- Cortex M4 microcontroller (besides the CortexA9)
- Dual Gigabit Ethernet
Add the initial support for it.
Signed-off-by: Fabio Estevam
Hi Steve,
On 14-06-19 11:32 PM, Marek Vasut wrote:
On Friday, June 20, 2014 at 08:18:42 AM, Lukasz Majewski wrote:
Hi Steve,
This series implements the fastboot flash command for eMMC
devices. It supports both raw and sparse images.
NOTES:
- the support for the fastboot flash
On Sun, Jun 22, 2014 at 12:19:21PM +0300, Vasili Galka wrote:
I'll really appreciate any help on this.
On Sun, Jun 15, 2014 at 3:57 PM, Vasili Galka vvv...@gmail.com wrote:
Hi,
I've installed a m68k-elf toolchain (based on gcc 4.8.1) and tried
building all m68k boards on latest
On Sun, Jun 22, 2014 at 06:33:30AM +0200, Heiko Schocher wrote:
- add CONFIG_SYS_GENERIC_BOARD
- remove CONFIG_OF_CONTROL to boot again
Signed-off-by: Heiko Schocher h...@denx.de
Acked-by: Kim Phillips kim.phill...@freescale.com
Acked-by: Simon Glass s...@chromium.org
Applied to
On Sun, Jun 22, 2014 at 06:33:29AM +0200, Heiko Schocher wrote:
move fdtdec_get_int() out of lib/fdtdec.c into lib/fdtdec_common.c
as this function is also used, if CONFIG_OF_CONTROL is not
used. Poped up on the ids8313 board using signed FIT images,
and activating CONFIG_SYS_GENERIC_BOARD.
On Sun, Jun 22, 2014 at 09:36:43AM +0200, Wolfgang Denk wrote:
Dear Heiko,
In message 53a67ed9.2090...@denx.de you wrote:
And I have no chance to detect this difference, when using
git am -3 ... ... it just remains in the code ...
I vote for copying the linux files, marking U-Boot
On 06/21/2014 02:40 AM, Scott Wood wrote:
On Sat, 2014-06-21 at 02:28 +0300, Ivan Khoronzhuk wrote:
For keystyone k2hk board the default nand layout is different
from davinci. So swich ecc layout at init in board file.
Signed-off-by: Ivan Khoronzhuk ivan.khoronz...@ti.com
---
From: Markus Niebel markus.nie...@tq-group.com
This patch adds the changes to boards.cfg and the board directory
under board/tqc.
TQMa6 is a family of modules based on Freescale i.MX6. It consists of
TQMa6Q (i.MX6 Quad), TQMa6D (i.MX6 Dual) featuring eMMC, and 1 GiB DDR3
TQMa6S (i.MX6 Solo)
On 14-06-23 12:01 AM, Youngmin Nam wrote:
Hello expert.
I'm trying to run ARMv8 u-boot on fast model. Exactly on Coretex-A57×4 In
FVP_VE
When I run command model_shell64 cadi_system_Linux64-Release-GCC-4.6.so
u-boot.elf
There isn't any pop up xterm terminal.
My fast model version is 8.3 and
On Mon, Jun 23, 2014 at 9:53 AM, Fabio Estevam feste...@gmail.com wrote:
From: Fabio Estevam fabio.este...@freescale.com
mx6solox is the newest member of the mx6 family.
Some of the new features on this variants are:
- Cortex M4 microcontroller (besides the CortexA9)
- Dual Gigabit Ethernet
From: Fabio Estevam fabio.este...@freescale.com
mx6solox is the newest member of the mx6 family.
Some of the new features on this variants are:
- Cortex M4 microcontroller (besides the CortexA9)
- Dual Gigabit Ethernet
Add the initial support for it.
Signed-off-by: Fabio Estevam
From: Fabio Estevam fabio.este...@freescale.com
mx6sx does not have sata nor ipu blocks, so do not handle such clocks.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Changes since v3:
- None
Changes since v2:
- None
Changes since v1:
- None
arch/arm/cpu/armv7/mx6/clock.c | 8
From: Fabio Estevam fabio.este...@freescale.com
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Changes since v3:
- None
Changes since v2:
- Adjust CONFIG_LOADADDR
Changes since v1:
- Previous commit log belonged to 1/4 patch, so moved it to the correct patch
From: Stephen Warren swar...@nvidia.com
ci_udc.c's usb_gadget_unregister_driver() doesn't call driver-unbind()
unlike other USB gadget drivers. Fix it to do this.
Without this, when ether.c's CDC Ethernet device is torn down,
eth_unbind() is never called, so dev-gadget is never set to NULL.
For
The following patch re-enables the dhcp functionality on omap3_beagle.
It was removed with df4dbb5df6ab1c1d27b3fd4acbaad69b47095daf when
omap3_beagle was converted to use ti_omap3_common.h. I have tested
beagleboard and beagleboard-xm with this patch and confirmed dhcp is
working.
Signed-off-by:
Rob Sebastian
I would appreciate your comments on this issue; I suspect that you had
some ideas regarding the implementation of the fastboot flash and
erase commands
Thanks in advance, Steve
On 14-06-23 05:58 AM, Lukasz Majewski wrote:
Hi Steve,
On 14-06-19 11:32 PM, Marek Vasut
On 06/22/2014 08:41 PM, Josh Wu wrote:
Signed-off-by: Josh Wu josh...@atmel.com
A quick description might be nice. Otherwise,
Reviewed-by: Stephen Warren swar...@nvidia.com
___
U-Boot mailing list
U-Boot@lists.denx.de
On 06/23/2014 01:20 AM, Alexandre Courbot wrote:
From: Bryan Wu pe...@nvidia.com
On Tegra114 and Tegra124 platforms, certain display-related registers cannot
be accessed unless the VPR registers are programmed. For bootloader, we
probably don't care about VPR, so we disable it (which counts
On 06/23/2014 01:39 AM, Lukasz Majewski wrote:
Commit d4f5ef59cc7 dfu: defer parsing of device string to IO backend changed
the function signature of dfu_init_env_entities(). Adjust cmd_thordown.c
to match that change.
Also, apply the same change as commit d6d37d737b58e dfu: free entities
On Mon, Jun 23, 2014 at 1:41 PM, Stephen Warren swar...@wwwdotorg.org wrote:
On 06/22/2014 08:41 PM, Josh Wu wrote:
Signed-off-by: Josh Wu josh...@atmel.com
A quick description might be nice. Otherwise,
Josh,
Any chance you want to patch the lack of CONFIG_ENV_IS_IN_SPI_FLASH
documentation
Thanks Stephen,
On 06/23/2014 11:02 AM, Stephen Warren wrote:
From: Stephen Warren swar...@nvidia.com
ci_udc.c's usb_gadget_unregister_driver() doesn't call driver-unbind()
unlike other USB gadget drivers. Fix it to do this.
Without this, when ether.c's CDC Ethernet device is torn down,
Add in an init function for the drivers/power framework so we can dump
and read the registers via i2c.
Cc: Łukasz Majewski l.majew...@samsung.com
Signed-off-by: Tom Rini tr...@ti.com
---
This is as far as we can take the framework on this family as in order
to make use of the pmic struct we need
This is not only more readable but also prevents a warning
about a missing prototype. The prototypes which are actually
missing are added.
cc: Albert Aribaud albert.u.b...@aribaud.net
Signed-off-by: Jeroen Hofstee jer...@myspectrum.nl
---
arch/arm/cpu/armv7/cache_v7.c | 45
As this is a weak function that we may override, provide a prototype for
it.
Cc: Łukasz Majewski l.majew...@samsung.com
Signed-off-by: Tom Rini tr...@ti.com
---
include/power/pmic.h |1 +
1 file changed, 1 insertion(+)
diff --git a/include/power/pmic.h b/include/power/pmic.h
index
On Mon, Jun 23, 2014 at 10:07:04PM +0200, Jeroen Hofstee wrote:
This is not only more readable but also prevents a warning
about a missing prototype. The prototypes which are actually
missing are added.
cc: Albert Aribaud albert.u.b...@aribaud.net
Signed-off-by: Jeroen Hofstee
In this case, I will have to send a new version to get rid of this check.
York
On 06/23/2014 01:50 PM, Rivera Jose-B46482 wrote:
The uname == NULL check can be removed.
Thanks,
German
From: Sun York-R58495
Sent: Friday, June 20, 2014 3:38 PM
First of all this looks a lot better, but it also
prevents a gcc warning (W=1), that the weak function
has no previous prototype.
cc: Simon Glass s...@chromium.org
Signed-off-by: Jeroen Hofstee jer...@myspectrum.nl
---
This likely causes some merge issues, but is so uggly it
deserves it.
---
Newer AM437x silicon requires us to explicitly power up
the USB2 PHY. By implementing usb_phy_power() we can
achieve that.
Signed-off-by: Felipe Balbi ba...@ti.com
---
drivers/usb/phy/omap_usb_phy.c | 17 -
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git
some boards won't work if the PHY isn't explicitly
powered up.
Signed-off-by: Felipe Balbi ba...@ti.com
---
drivers/usb/host/xhci-omap.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/host/xhci-omap.c b/drivers/usb/host/xhci-omap.c
index e667810..912b2bd 100644
---
Hi
Il 23/giu/2014 23:26 Felipe Balbi ba...@ti.com ha scritto:
Newer AM437x silicon requires us to explicitly power up
the USB2 PHY. By implementing usb_phy_power() we can
achieve that.
Signed-off-by: Felipe Balbi ba...@ti.com
---
drivers/usb/phy/omap_usb_phy.c | 17 -
1
[this didn't appear in patchwork I think, so trying again]
Hi Tom,
Here are two that were left behind.
The following changes since commit 39b6d07fd7e692736cdb05a000b1c84ab43de4fb:
Merge branch 'master' of git://git.denx.de/u-boot-dm (2014-06-20
20:03:51 -0400)
are available in the git
On 23 June 2014 03:15, Linus Walleij linus.wall...@linaro.org wrote:
Turn on generic board for the integrators, as per the request in
the startup message. Everything just works, tested on the
Integrator/AP and Integrator/CP.
Signed-off-by: Linus Walleij linus.wall...@linaro.org
Thanks.
Hi,
On Mon, Jun 23, 2014 at 11:28:30PM +0200, Michael Trimarchi wrote:
@@ -222,7 +222,22 @@ static void am437x_enable_usb2_phy2(struct omap_xhci
*omap)
void usb_phy_power(int on)
{
- return;
+ u32 val;
+
+ /* USB1_CTRL */
+ val = readl(0x44e10628);
Hi
Il 23/giu/2014 23:58 Felipe Balbi ba...@ti.com ha scritto:
Hi,
On Mon, Jun 23, 2014 at 11:28:30PM +0200, Michael Trimarchi wrote:
@@ -222,7 +222,22 @@ static void am437x_enable_usb2_phy2(struct
omap_xhci
*omap)
void usb_phy_power(int on)
{
- return;
+ u32
Make MMU function reusable. Platform code can setup its own MMU tables.
Signed-off-by: York Sun york...@freescale.com
CC: David Feng feng...@phytium.com.cn
---
Change log
v9: no change
v8: no change
v7: no change
v6: Modified from v4. Add dsb sy before setting MMU registers and add isb
Freescale LayerScape with Chassis Generation 3 is a set of SoCs with
ARMv8 cores and 3rd generation of Chassis. We use different MMU setup
to support memory map and cache attribute for these SoCs. MMU and cache
are enabled very early to bootst performance, especially for early
development on
LS2085A is an ARMv8 implementation. This adds board support for emulator
and simulator:
Two DDR controllers
UART2 is used as the console
IFC timing is tightened for speedy booting
Support DDR3 and DDR4 as separated targets
Management Complex (MC) is enabled
Support for GIC 500 (based
From: J. German Rivera german.riv...@freescale.com
This is needed for accessing peripherals with 64-bit MMIO registers,
from ARMv8 processors.
Signed-off-by: J. German Rivera german.riv...@freescale.com
---
Change log
v9: no change
v8: no change
v7: no change
v6: no change
v5: no change
From: J. German Rivera german.riv...@freescale.com
Adding support to load and start the Layerscape Management Complex (MC)
firmware. First, the MC GCR register is set to 0 to reset all cores. MC
firmware and DPL images are copied from their location in NOR flash to
DDR. MC registers are updated
Newer AM437x silicon requires us to explicitly power up
the USB2 PHY. By implementing usb_phy_power() we can
achieve that.
Signed-off-by: Felipe Balbi ba...@ti.com
---
Changes since v1:
- add macros for USB1_CTRL register and bits
arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 5
Previously the driver was only tested on Power SoCs. Different barrier
instructions are needed for ARM SoCs.
Signed-off-by: York Sun york...@freescale.com
---
Change log
v2: use mb() and isb() instead of #ifdef
arch/arm/include/asm/arch-fsl-lsch3/config.h |4
arch/arm/include/asm/io.h
Hi,
Thanks for your patch.
I applied to next branch of u-boot-sh.
Best regards,
Nobuhiro
2014-06-20 16:40 GMT+09:00 Masahiro Yamada yamad...@jp.panasonic.com:
The linker scripts of sh2/sh3/sh4 are almost the same.
The difference among them is essentially only one line.
They can be
Hi Sinan,
[...]
+Orphan powerpc mpc83xx- freescale
mpc837xerdb MPC837XERDB
I have this board and I would very much like that it'll continue to
be maintained. I just tested the ToT and it seems other than some minor
warnings and request to use
Use make board_defconfig instead of make board_config.
FIXME!
This fixup is bad because it still depends on boards.cfg
to support options such as -a ARCH, -c CPU etc.
We want to delete it when switching to Kconfig.
We have to invent another method without using boards.cfg.
Signed-off-by:
Use make board_defconfig instead of make board_config.
FIXME!
This fixup is bad because it still depends on boards.cfg
to support options such as -a ARCH, -c CPU etc.
We want to delete it when switching to Kconfig.
We have to invent another method without using boards.cfg.
Signed-off-by:
This commit enables Kconfig.
Going forward, we use Kconfig for board configuration.
mkconfig will never be used. Nor will include/config.mk be generated.
Kconfig must be adjusted for U-Boot because our situation is
a little more complicated than Linux Kernel.
We have to generate multiple binary
mkconfig is no longer used in Kconfig.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes in v3: None
Changes in v2: None
mkconfig | 187 ---
1 file changed, 187 deletions(-)
delete mode 100755 mkconfig
diff --git
We are about to switch to Kconfig in the next commit.
But there are something to get done beforehand.
In Kconfig, include/generated/autoconf.h defines boolean
CONFIG macros as 1.
CONFIG_SPL and CONFIG_TPL, if defined, must be set to 1.
Otherwise, when switching to Kconfig, the build log
would be
This commit adds more Kconfig files, which were written by hand.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
Changes in v3:
- Add CONFIG_SUBIMAGES for generic sub-image framework.
- Move CONFIG_SYS_EXTRA_OPTIONS to the top Kconfig.
- Add more help messages to each config.
CONFIG_${ARCH} is defined by Kconfig.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Reviewed-by: Simon Glass s...@chromium.org
---
Changes in v3: None
Changes in v2: None
arch/arc/config.mk | 2 +-
arch/arm/config.mk | 2 +-
arch/avr32/config.mk
Now CONFIG_SPL and CONFIG_TPL are defined in Kconfig.
Remove the redundant definition in config headers.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
Reviewed-by: Simon Glass s...@chromium.org
---
Changes in v3:
- Rebase on the current u-boot/master
Changes in v2:
- Rebase on
Do not apply this patch to the main line
What is this tool?
--
This tool converts boards.cfg to defconfig and Kconfig files.
It automatically generates
- arch/${ARCH}/Kconfig
-
On 06/24/2014 03:44 AM, Stephen Warren wrote:
On 06/23/2014 01:20 AM, Alexandre Courbot wrote:
From: Bryan Wu pe...@nvidia.com
On Tegra114 and Tegra124 platforms, certain display-related registers cannot
be accessed unless the VPR registers are programmed. For bootloader, we
probably don't
From: Bryan Wu pe...@nvidia.com
On Tegra114 and Tegra124 platforms, certain display-related registers cannot
be accessed unless the VPR registers are programmed. For bootloader, we
probably don't care about VPR, so we disable it (which counts as programming
it, and allows those display-related
Thanks Steve.
But when I run command like below,
the parameters that I configured didn't work. It seems that there need to
use some different parameter for FVP_VE model.
Do you have any idea?
The uname == NULL check can be removed.
Thanks,
German
From: Sun York-R58495
Sent: Friday, June 20, 2014 3:38 PM
To: Jeroen Hofstee; Rivera Jose-B46482
Cc: albert.u.b...@aribaud.net; Kanetkar Shruti-B44454; u-boot@lists.denx.de
Subject: Re: [U-Boot]
Hello Tom,
Am 23.06.2014 17:05, schrieb Tom Rini:
On Sun, Jun 22, 2014 at 09:36:43AM +0200, Wolfgang Denk wrote:
Dear Heiko,
In message53a67ed9.2090...@denx.de you wrote:
And I have no chance to detect this difference, when using
git am -3 ... ... it just remains in the code ...
I vote
Hi Simon,
I have been thinking about this a lot, but it isn't 100% clear to me.
While I agree that duplicating the CONFIGs is bad, in fact the
opposite of what I was getting at, I do feel that things like
CONFIG_TEGRA20 need to be set in one place. We don't want the SPL/TPL
config to be
Hi Masahiro
Masahiro Yamada wrote:
Hi Sinan,
[...]
+Orphan powerpc mpc83xx- freescale
mpc837xerdb MPC837XERDB
I have this board and I would very much like that it'll continue to
be maintained. I just tested the ToT and it seems other than some minor
84 matches
Mail list logo
