Hi Lukasz,
On 13 March 2015 at 13:23, Lukasz Majewski l.majew...@samsung.com wrote:
Hi Dileep,
g_dnl_gadget_register() fails for dra7xx dwc3 gadget when running
cmd_fastboot. Calling board_usb_init() to fix this.
fastboot command is now added with an optional controller index
argument
On Friday, March 13, 2015 at 07:39:08 PM, Stephen Warren wrote:
On 03/13/2015 12:13 PM, Marek Vasut wrote:
On Friday, March 13, 2015 at 05:35:53 PM, Stephen Warren wrote:
On 03/13/2015 08:30 AM, Marek Vasut wrote:
On Friday, March 13, 2015 at 07:13:09 AM, Stephen Warren wrote:
BCM2835 bus
Dear all,
I am quite new to uboot and I am experimenting it on a iMX28 EVK board
(rev. D).
I am building the uboot (2014.07 version) by means of buildroot (version
2014.08) and I am using the standard mxs-bootlet package provided by
buildroot.
When trying to boot the EVK, it hangs after DRAM
Dear Masahiro,
Your help has enabled me to make my board Makefile do what I want
(except for the clean target, see below).
On 03/12/2015 09:20 PM, Masahiro Yamada wrote:
Hi James,
2015-03-13 3:35 GMT+09:00 James Chargin jimccr...@gmail.com:
I could still use some help with this from
On Friday, March 13, 2015 at 05:35:53 PM, Stephen Warren wrote:
On 03/13/2015 08:30 AM, Marek Vasut wrote:
On Friday, March 13, 2015 at 07:13:09 AM, Stephen Warren wrote:
BCM2835 bus addresses use the top 2 bits to determine whether
peripherals use or bypass the GPU L1 and L2 cache.
Hello,
I'm looking to build a standalone application, and I can't figure out
how to access the jump table without including GPL code.
I see that 'exports.h' and '_exports.h', and stubs.c all do NOT have the
GPL license note. I assume that's so we can build applications that use
the jump
Stephen Warren swar...@wwwdotorg.org writes:
BCM2835 bus addresses use the top 2 bits to determine whether peripherals
use or bypass the GPU L1 and L2 cache. BCM2835-ARM-Peripherals.pdf states
that:
0: L1 L2 cached
4: L2 cache coherent (non allocaing)
8: L2 cached only
c: Direct
On 03/13/2015 12:13 PM, Marek Vasut wrote:
On Friday, March 13, 2015 at 05:35:53 PM, Stephen Warren wrote:
On 03/13/2015 08:30 AM, Marek Vasut wrote:
On Friday, March 13, 2015 at 07:13:09 AM, Stephen Warren wrote:
BCM2835 bus addresses use the top 2 bits to determine whether
peripherals use
On Sat, 14 Mar 2015 00:58:51 +0530
Dileep Katta dileep.ka...@linaro.org wrote:
Hi Lukasz,
On 13 March 2015 at 13:23, Lukasz Majewski l.majew...@samsung.com
wrote:
Hi Dileep,
g_dnl_gadget_register() fails for dra7xx dwc3 gadget when running
cmd_fastboot. Calling board_usb_init()
Hi Adrien,
On Fri, Mar 13, 2015 at 12:44 PM, Adrien Decostre ad.decos...@gmail.com wrote:
Dear all,
I am quite new to uboot and I am experimenting it on a iMX28 EVK board
(rev. D).
I am building the uboot (2014.07 version) by means of buildroot (version
2014.08) and I am using the
Signed-off-by: Andrey Danin danind...@mail.ru
---
common/Makefile | 2 +-
common/lcd.c | 24 --
common/lcd_console.c | 122 +-
include/lcd_console.h | 33 ++
4 files changed, 105 insertions(+), 76 deletions(-)
This code is based on ansi implementation in cfb_console.
It is adopted to be used in lcd and cfb_console drivers.
Signed-off-by: Andrey Danin danind...@mail.ru
---
common/ansi_console.c | 355 +
include/ansi_console.h | 39 ++
2 files
Signed-off-by: Andrey Danin danind...@mail.ru
---
drivers/video/Makefile | 2 +-
drivers/video/cfb_console.c | 381
2 files changed, 33 insertions(+), 350 deletions(-)
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index
Signed-off-by: Andrey Danin danind...@mail.ru
---
include/configs/paz00.h | 5 +
1 file changed, 5 insertions(+)
diff --git a/include/configs/paz00.h b/include/configs/paz00.h
index 284419f..17063d0 100644
--- a/include/configs/paz00.h
+++ b/include/configs/paz00.h
@@ -64,6 +64,11 @@
Hi Albert,
On 13 March 2015 at 02:04, Albert ARIBAUD (3ADEV)
albert.arib...@3adev.fr wrote:
This series extends functionality for the LPC32xx platform and
introduces the WORK Microwave work_92105 board which makes use
of the extended functionality.
NOTES:
A - I2C driver remains non-DM
Main reason for this patches is ability to use bootmenu
on devices that use lcd driver (like Toshiba AC100).
Lcd driver doesn't have ansi support while cfb_console does.
Ansi related code was moved from cfb_console to separate place.
Then this code was used in both cfb_console and lcd driver.
On Fri, 2015-03-13 at 09:04 +0100, Albert ARIBAUD (3ADEV) wrote:
+ /* go through all four small pages */
+ for (i = 0; i 4; i++) {
+ /* start auto decode (reads 528 NAND bytes) */
+ writel(0, lpc32xx_nand_mlc_registers-ecc_auto_dec_reg);
+ /* wait
Hi Simon,
On 13.03.2015 03:48, Simon Glass wrote:
This patch adds the feature to only stop the autobooting, and therefor
boot into the U-Boot prompt, when the input string / password matches
a values that is encypted via a SHA256 hash and saved in the environment.
This feature is enabled by
BCM2835 bus addresses use the top 2 bits to determine whether peripherals
use or bypass the GPU L1 and L2 cache. BCM2835-ARM-Peripherals.pdf states
that:
0: L1 L2 cached
4: L2 cache coherent (non allocaing)
8: L2 cached only
c: Direct uncached.
That document also states that Software accessing
We can enable / disable trace feature from the FTRACE config options.
To enable, compile U-Boot with FTRACE=1.
This patch add #ifdef FTRACE in exynos5-common.h for enable/disable
to use FTRACE configs instead of having to change board config files.
Signed-off-by: Inha Song ideal.s...@samsung.com
This target was added by commit cbdd9a9737cc (sunxi: kconfig: Add
%_felconfig rule to enable FEL build of sunxi platforms.).
At that time, U-Boot used separate .config files for U-Boot proper
and SPL. I understood the pain to modify both .config and
spl/.config.
Now, we have switched to single
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v5: None
Changes in v4: None
Changes in v3:
- move regs and functions in private struct
Changes in v2:
- added MUX setting for SSP0
arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 14 +++
This driver only supports Driver Model, not legacy model.
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v5: None
Changes in v4: None
Changes in v3:
- move DM dependency constraint into Kconfig
- move regs pointer and function cache into private struct
- discourage
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/cpu/arm926ejs/lpc32xx/cpu.c | 9 +
arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 7 +
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 11 ++
arch/arm/include/asm/arch-lpc32xx/clk.h | 4 +
This series extends functionality for the LPC32xx platform and
introduces the WORK Microwave work_92105 board which makes use
of the extended functionality.
NOTES:
A - I2C driver remains non-DM
During v2 review, it was suggested to move to DM for I2C. However,
this caused issues with the
The controller's Reed-Solomon ECC hardware is
used except of course for raw reads and writes.
It covers in- and out-of-band data together.
The SPL framework is supported.
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v5:
- switch to CONFIG_SYS_NAND_SELF_INIT
Enable SPL support for at91sam9n12ek boards, now it supports
boot up from NAND flash, serial flash.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
arch/arm/mach-at91/Kconfig | 1 +
arch/arm/mach-at91/Makefile| 1 +
arch/arm/mach-at91/include/mach/at91_pmc.h |
Supports boot up from NAND flash with software ECC eanbled.
And supports boot up from SD/MMC card with FAT file system.
As the boot from SD/MMC card with FAT file system, the BSS
segment is too big to fit into SRAM, so, use the lds to put
it into SDRAM.
Signed-off-by: Bo Shen
Enable SPL support for at91sam9x5ek board. Now, it supports
boot up from NAND flash and SPI flash.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
arch/arm/mach-at91/Kconfig | 1 +
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/include/mach/at91_pmc.h
Config MCKR according to the datasheet sequence, or else it
will cause the MCKR configuration failed.
Remove timeout checking for clock configuration, if configure
the clock failed, let the system hang while not run in wrong
clock configuration.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
This patch series enable SPL support for following boards:
- at91sam9m10g45ek
- NAND flash boot support
- SD card boot support
- at91sam9n12ek
- NAND flash boot support
- SPI flash boot support
- at91sam9x5ek
- NAND flash boot support
- SPI flash boot support
Bo
Hi Bo,
2015-03-13 18:19 GMT+09:00 Bo Shen voice.s...@atmel.com:
diff --git a/configs/at91sam9m10g45ek_mmc_defconfig
b/configs/at91sam9m10g45ek_mmc_defconfig
index 6949d3a..84d3133 100644
--- a/configs/at91sam9m10g45ek_mmc_defconfig
+++ b/configs/at91sam9m10g45ek_mmc_defconfig
@@ -1,4
Hi Dileep,
g_dnl_gadget_register() fails for dra7xx dwc3 gadget when running
cmd_fastboot. Calling board_usb_init() to fix this.
fastboot command is now added with an optional controller index
argument with default value as 0, to facilitate configurable
controller index.
Signed-off-by:
Work_92105 from Work Microwave is an LPC3250-
based board with the following features:
- 64MB SDR DRAM
- 1 GB SLC NAND, managed through MLC controller.
- Ethernet
- Ethernet + PHY SMSC8710
- I2C:
- EEPROM (24M01-compatible)
- RTC (DS1374-compatible)
- Temperature sensor (DS620)
- DACs (2 x
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v5: None
Changes in v4: None
Changes in v3:
- remove script/Makefile.spl change
Changes in v2:
- move boot image generation to mkimage framework
common/image.c | 1 +
include/image.h | 1 +
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- cosmetic: added a blank line before copyright
drivers/hwmon/Makefile | 1 +
drivers/hwmon/ds620.c | 65
Hello Stefan,
Am 12.03.2015 um 16:18 schrieb Stefan Roese:
Hi Markus,
On 12.03.2015 15:25, Markus Niebel wrote:
Am 12.03.2015 um 13:34 schrieb Stefan Roese:
By making the tqma6_iomuxc_spi() weak, this patch adds the possibility to
add a different function for this SPI configuration. This
Hi Masahiro,
On 03/13/2015 05:34 PM, Masahiro Yamada wrote:
Hi Bo,
2015-03-13 18:19 GMT+09:00 Bo Shen voice.s...@atmel.com:
diff --git a/configs/at91sam9m10g45ek_mmc_defconfig
b/configs/at91sam9m10g45ek_mmc_defconfig
index 6949d3a..84d3133 100644
---
Masahiro Yamada (2):
kbuild: remove *_felconfig target
kbuild: remove scripts/multiconfig.sh
Makefile | 13 +-
scripts/kconfig/Makefile | 10 +
scripts/multiconfig.sh | 102 ---
3 files changed, 21 insertions(+), 104
We have switched to the single .config configuration system,
the same one as used in Linux Kernel.
The necessary glue code is small enough now, so move it to the
top-level Makefile and scripts/kconfig/Makefile, and then delete
scripts/multiconfig.sh.
Signed-off-by: Masahiro Yamada
On 10/03/2015 08:04, Stefan Roese wrote:
Without this patch, the IMX watchdog will not be initialized. And therefor
not active. This patch fixes this by calling hw_watchdog_init() also when
CONFIG_IMX_WATCHDOG is defined.
Signed-off-by: Stefan Roese s...@denx.de
Cc: Simon Glass
Hi Fabio,
On 02/03/2015 18:14, Fabio Estevam wrote:
Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
On 09/03/2015 16:49, Fabio Estevam wrote:
By not defining CONFIG_SYS_PROMPT, the standard = prompt is used, so remove
its definition.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On Fri, Mar 13, 2015 at 09:48:56AM -0400, Tom Rini wrote:
On Wed, Mar 11, 2015 at 09:51:38AM +0100, Stefan Roese wrote:
Without this dcache_flush the updated bootcounter may not be saved to
its location.
This was detected on an iMX.6 platform using the OCRAM (internal SRAM)
as
Albert,
2015-02-27 2:43 GMT+09:00 Masahiro YAMADA yamad...@jp.panasonic.com:
Hi Albert,
2015-02-26 6:14 GMT+09:00 Albert ARIBAUD albert.u.b...@aribaud.net:
I'm fine with the patch's goal and principle, but it does not seem to
apply properly to u-boot-arm/master. Can you have a look?
Hi,
I have a question regarding setting mac address for drivers.
Drivers setting up write_hwaddr via eth_write_hwaddr via eth_initialize
which is called from common/board_r.c.
But then there are some drivers(macb, designware, altera_tse) which also calls
mac setup from dev-init which has side
Hi John,
On 03/03/2015 15:48, Maxin B. John wrote:
Replace mmc open/close with mmc dev in mx6sabre_common.h as those commands
were removed with this commit: 614b2bf1c9bf80dbad24f5e5ce1d115bf24a831d
cmd_mmc.c: Drop open/close mmc sub-commands
Signed-off-by: Maxin B. John
On 02/03/2015 14:17, Fabio Estevam wrote:
Device Firmware Upgrade (DFU) is a very convenient mechanism to upgrade U-boot
on the eMMC.
Add support for it.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 02/03/2015 16:57, Fabio Estevam wrote:
Provide instructions on how to upgrade U-boot in the eMMC.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 09/03/2015 22:44, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Since commit ad8aae82b20ac6a (mx6sabre: Enable User Mass Storage) SPL target
does not boot anymore due to the increased spl image size.
Only enable USB Mass Storage for the non-SPL target.
Hi Dirk,
On 09/03/2015 14:48, Dirk Behme wrote:
Disable the warm reset and enable the cold reset for a more reliable
restart ('reset'). This is taken from the Linux kernel, see imx_src_init()
in arch/arm/mach-imx/src.c.
Signed-off-by: Dirk Behme dirk.be...@de.bosch.com
---
Applied to
On 04/03/2015 14:33, Peng Fan wrote:
There is no need to include asm/bootm.h twice, so remove one.
Signed-off-by: Peng Fan peng@freescale.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=
DENX
On 12/03/2015 02:52, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Warp has a DDR eMMC, so enable CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE for better
performance:
reading zImage
5790288 bytes read in 117 ms (47.2 MiB/s)
Signed-off-by: Fabio Estevam
On 12/03/2015 02:52, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE should be selected only by boards that
really
have a DDR-capable eMMC, so remove this option from common code to avoid
regressions.
Reported-by: Stefan Roese
Hi Markus,
On 13.03.2015 10:05, Markus Niebel wrote:
-static void tqma6_iomuxc_spi(void)
+__weak void tqma6_iomuxc_spi(void)
{
unsigned i;
When implementing an baseboard specific init handler, we will get
a warning about unused
tqma6_ecspi1_pads and tqma6_ecspi1_cs, or did I miss
On 13.03.2015 14:25, Stefan Roese wrote:
But OK, this looks not very nice
As I said, not completely ready, but would prevent some code duplication.
With my current approach we have code duplication.
Ups. I meant we have *no* code duplication. Sorry!
Thanks,
Stefan
On Wed, Mar 11, 2015 at 09:51:38AM +0100, Stefan Roese wrote:
Without this dcache_flush the updated bootcounter may not be saved to
its location.
This was detected on an iMX.6 platform using the OCRAM (internal SRAM)
as bootcounter storage area. And issuing reset from within U-Boot
cause
On Friday, March 13, 2015 at 07:13:09 AM, Stephen Warren wrote:
BCM2835 bus addresses use the top 2 bits to determine whether peripherals
use or bypass the GPU L1 and L2 cache. BCM2835-ARM-Peripherals.pdf states
that:
0: L1 L2 cached
4: L2 cache coherent (non allocaing)
8: L2 cached only
On 03/13/2015 08:30 AM, Marek Vasut wrote:
On Friday, March 13, 2015 at 07:13:09 AM, Stephen Warren wrote:
BCM2835 bus addresses use the top 2 bits to determine whether peripherals
use or bypass the GPU L1 and L2 cache. BCM2835-ARM-Peripherals.pdf states
that:
0: L1 L2 cached
4: L2 cache
Hello Stefan,
Am 13.03.2015 um 14:25 schrieb Stefan Roese:
Hi Markus,
On 13.03.2015 10:05, Markus Niebel wrote:
Not sure if I understand this correctly. Could you give an example? Again,
my current baseboard has no SPI at all.
tqma6_iomux_spi is for the SPI controller the serial nor is
61 matches
Mail list logo
