On 10/15/2016 03:03 AM, Alexander Graf wrote:
> When implementing efi loader support, we can expose runtime services
> for payloads. One such service is CPU reset.
>
> This patch implements RTS CPU reset support for layerscape systems.
>
> Signed-off-by: Alexander Graf
>
> ---
>
> v4 -> v5:
>
>
On 09/07/2016 10:07 PM, Zhao Qiang wrote:
> T series boards use unified RCW for sd, spi and nand boot.
> Now split txxx_rcw.cfg to txxx_sd_rcw.cfg, txxx_spi_rcw.cfg
> and txxx_nand_rcw.cfg for SPI/NAND/SD boot.
> And modify RCW[PBI_SRC] for them:
> PBI_SRC=5for SPI 24-bit addressi
On 10/15/2016 09:17 PM, Max Krummenacher wrote:
> Hi Marak
>
>>> --- a/include/configs/imx6_spl.h
>>> +++ b/include/configs/imx6_spl.h
>>> @@ -23,6 +23,8 @@
>>> *which consists of a 4K header in front of us that contains
>>> the IVT, DCD
>>> *and some padding thus 'our' max size is rea
On 10/15/2016 09:18 PM, Max Krummenacher wrote:
> Hi Marek
>
> Am Samstag, den 15.10.2016, 19:29 +0200 schrieb Marek Vasut:
>> On 10/15/2016 07:10 PM, Max Krummenacher wrote:
>>> If CONFIG_SPL_LIBCOMMON_SUPPORT is not defined there is a lone case
>>> statement
>>> at the end of the switch leading
Hi Marek
Am Samstag, den 15.10.2016, 19:29 +0200 schrieb Marek Vasut:
> On 10/15/2016 07:10 PM, Max Krummenacher wrote:
> > If CONFIG_SPL_LIBCOMMON_SUPPORT is not defined there is a lone case
> > statement
> > at the end of the switch leading to a compile error.
> > Remove the offending case state
Hi Marak
> > --- a/include/configs/imx6_spl.h
> > +++ b/include/configs/imx6_spl.h
> > @@ -23,6 +23,8 @@
> > *which consists of a 4K header in front of us that contains
> > the IVT, DCD
> > *and some padding thus 'our' max size is really 0x00908000 -
> > 0x00918000
> > *or 64KB
>
On 10/15/2016 03:03 AM, Alexander Graf wrote:
> On ls2080 we have a separate network fabric component which we need to
> shut down before we enter Linux (or any other OS). Along with that also
> comes configuration of the fabric using a description file.
>
> Today we always stop and configure the f
Hi,
Le samedi 15 octobre 2016 à 20:41 +0300, Nicolae Rosia a écrit :
> Hi,
>
> On Fri, Oct 14, 2016 at 4:28 PM, Paul Kocialkowski wrote:
> >
> > Le jeudi 13 octobre 2016 à 13:47 +0300, Nicolae Rosia a écrit :
> > >
> > > From: Nicolae Rosia
> > >
> > > Commit a85362fb3e1fc7833723accddbbae431
On Sat, Oct 15, 2016 at 08:41:35PM +0300, Nicolae Rosia wrote:
> Hi,
>
> On Fri, Oct 14, 2016 at 4:28 PM, Paul Kocialkowski wrote:
> > Le jeudi 13 octobre 2016 à 13:47 +0300, Nicolae Rosia a écrit :
> >> From: Nicolae Rosia
> >>
> >> Commit a85362fb3e1fc7833723accddbbae431091d06b8 refactored the
Hi,
On Fri, Oct 14, 2016 at 4:28 PM, Paul Kocialkowski wrote:
> Le jeudi 13 octobre 2016 à 13:47 +0300, Nicolae Rosia a écrit :
>> From: Nicolae Rosia
>>
>> Commit a85362fb3e1fc7833723accddbbae431091d06b8 refactored the code
>> but the register read ended up in the wrong if branch.
>> Currently,
On 09/07/2016 10:07 PM, Zhao Qiang wrote:
> PBL flush command is restricted to CCSR memory space.
> So use WAIT PBI command to provide enough time for data to get flush in
> target memory
>
> Signed-off-by: Zhao Qiang
> ---
> Changes for v2:
> - split to two patches
> Changes for v3:
>
On 10/15/2016 12:13 AM, Dinh Nguyen wrote:
>
>
> On 10/14/2016 10:09 AM, Marek Vasut wrote:
>> On 10/14/2016 03:08 PM, Dinh Nguyen wrote:
>>>
>>>
>>> On 10/14/2016 02:23 AM, Marek Vasut wrote:
On 10/10/2016 05:52 PM, Dinh Nguyen wrote:
> Hi,
Hi,
> This patchset adds th
On 10/15/2016 07:10 PM, Max Krummenacher wrote:
> Synchronize CONFIG_SPL_PAD_TO (used at build time for u-boot-with-spl.imx)
> with
> CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (used by SPL to read u-boot image).
>
> Signed-off-by: Max Krummenacher
> ---
>
> include/configs/imx6_spl.h | 3 +++
>
On 10/15/2016 04:05 PM, Tom Rini wrote:
> On Sat, Oct 15, 2016 at 06:32:46PM +0530, Jagan Teki wrote:
>
>> CONFIG_USB_MAX_CONTROLLER_COUNT not used in DM_USB, hence moved
>> to non-dm from global area.
>>
>> Cc: Simon Glass
>> Cc: Marek Vasut
>> Cc: Masahiro Yamada
>> Signed-off-by: Jagan Teki
On 10/15/2016 07:10 PM, Max Krummenacher wrote:
> If CONFIG_SPL_LIBCOMMON_SUPPORT is not defined there is a lone case statement
> at the end of the switch leading to a compile error.
> Remove the offending case statement.
>
> | common/spl/spl_mmc.c:339:7: error: label at end of compound statement
Synchronize CONFIG_SPL_PAD_TO (used at build time for u-boot-with-spl.imx) with
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (used by SPL to read u-boot image).
Signed-off-by: Max Krummenacher
---
include/configs/imx6_spl.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/configs/imx6_
The ipu has two display interfaces. Make the used one a parameter
in struct display_info_t instead of using unconditionally DI0.
DI0 is the default setting.
Signed-off-by: Max Krummenacher
---
arch/arm/imx-common/video.c | 2 +-
arch/arm/include/asm/imx-common/video.h | 1 +
2 files
If CONFIG_SPL_LIBCOMMON_SUPPORT is not defined there is a lone case statement
at the end of the switch leading to a compile error.
Remove the offending case statement.
| common/spl/spl_mmc.c:339:7: error: label at end of compound statement
Signed-off-by: Max Krummenacher
---
common/spl/spl_mmc
On 10/15/2016 03:03 AM, Alexander Graf wrote:
> Some boards decided not to run ATF or other secure firmware in EL3, so
> they instead run U-Boot there. The uEFI spec doesn't know what EL3 is
> though - it only knows about EL2 and EL1. So if we see that we're running
> in EL3, let's get into EL2 to
On Sun, Oct 16, 2016 at 02:02:13AM +0900, Masahiro Yamada wrote:
> 2016-10-15 23:05 GMT+09:00 Tom Rini :
> > On Sat, Oct 15, 2016 at 06:32:46PM +0530, Jagan Teki wrote:
> >
> >> CONFIG_USB_MAX_CONTROLLER_COUNT not used in DM_USB, hence moved
> >> to non-dm from global area.
> >>
> >> Cc: Simon Glas
On 09/30/2016 01:57 AM, Prabhakar Kushwaha wrote:
> lbc_clk is used to fixup dts as "bus frequency".
> It is not being used by Linux IFC and eLBC driver.
>
> So remove unused "bus frqeuency" fix-up of devicre tree.
>
> Signed-off-by: Prabhakar Kushwaha
> ---
> arch/powerpc/cpu/mpc85xx/fdt.c | 4 -
On 10/15/2016 03:03 AM, Alexander Graf wrote:
> The DP-DDR shouldn't be exposed as conventional memory to an OS, so let's
> rather claim it's a reserved region in the EFI memory map
>
> Signed-off-by: Alexander Graf
> ---
> board/freescale/ls2080ardb/ls2080ardb.c | 9 +
> 1 file changed,
2016-10-15 23:05 GMT+09:00 Tom Rini :
> On Sat, Oct 15, 2016 at 06:32:46PM +0530, Jagan Teki wrote:
>
>> CONFIG_USB_MAX_CONTROLLER_COUNT not used in DM_USB, hence moved
>> to non-dm from global area.
>>
>> Cc: Simon Glass
>> Cc: Marek Vasut
>> Cc: Masahiro Yamada
>> Signed-off-by: Jagan Teki
>>
Tom,
The following changes since commit 44afdc4a12b9f6f48338e7975e4f08cfe90dba74:
Merge branch 'master' of git://git.denx.de/u-boot-net (2016-10-13
13:38:49 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git
for you to fetch changes up to a9320c495ef938c
On 10/15/2016 03:03 AM, Alexander Graf wrote:
> Some systems may implemente TrustZone (EL3) in U-Boot. Those systems
> reserve some memory that U-Boot is aware of as secure.
>
> For those systems, mask out that secure memory in the EFI memory map,
> as it's not usable from EL2 or EL1.
>
> Signed-of
On 10/15/2016 03:03 AM, Alexander Graf wrote:
> The efi loader code has its own memory map, so it needs to be aware where
> the spin tables are located, to ensure that no code writes into those
> regions.
>
> Signed-off-by: Alexander Graf
> ---
> arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 6 ++
On 10/15/2016 03:03 AM, Alexander Graf wrote:
> Most new systems in U-Boot these days make use of the generic "distro"
> framework which allows a user to have U-Boot scan for a bootable OS
> on all available media types.
>
> This patch extends the LS2080ARDB board to use that framework if the
> har
Hi
I'm moving an i.MX6 based system to use SPL.
With CONFIG_USE_ARCH_MEMSET/MEMCPY enabled the SPL build fails with
undefined reference to `memset'
undefined reference to `memcpy'
The following RFC Patch should have made it in mainline by way of u
-boot-arm, however it didn't.
http://lists.denx.d
On Sat, Oct 15, 2016 at 08:16:27AM -0500, Adam Ford wrote:
> Not all networks have a DHCP server configured properly, so these
> scripts make it easier to boot in that scenario.
>
> Signed-off-by: Adam Ford
>
> diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
> index 9
On Sat, Oct 15, 2016 at 06:32:46PM +0530, Jagan Teki wrote:
> CONFIG_USB_MAX_CONTROLLER_COUNT not used in DM_USB, hence moved
> to non-dm from global area.
>
> Cc: Simon Glass
> Cc: Marek Vasut
> Cc: Masahiro Yamada
> Signed-off-by: Jagan Teki
> ---
> drivers/usb/host/ehci-hcd.c | 8
On 15 October 2016 at 07:21, Simon Glass wrote:
> On 8 October 2016 at 01:23, Kever Yang wrote:
>> SPL_MMC_SUPPORT defined in rockchip top level Kconfig instead of
>> inside rk3288 and default to disable if ROCKCHIP_SPL_BACK_TO_BROM
>> defined.
>>
>>
>> Signed-off-by: Kever Yang
>> ---
>>
>> ar
On 15 October 2016 at 07:24, Simon Glass wrote:
> On 10 October 2016 at 11:12, Vagrant Cascadian wrote:
>> On 2016-10-07, Kever Yang wrote:
>>> Add support for rk3288 dram capacity auto detect, support DDR3 and
>>> LPDDR3, DDR2 is not supported.
>>> The program will automatically detect:
>>> - ch
On 15 October 2016 at 07:24, Simon Glass wrote:
> On 7 October 2016 at 01:59, Kever Yang wrote:
>> The GRF base address is missing, fix it.
>>
>> Signed-off-by: Kever Yang
>> ---
>>
>> arch/arm/mach-rockchip/rk3288/rk3288.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Acked-by:
On 15 October 2016 at 07:24, Simon Glass wrote:
> On 7 October 2016 at 03:47, Kever Yang wrote:
>> Since we implement the dram capacity auto detect, we don't
>> need to set the channel number and sdram-channel in dts.
>>
>> Signed-off-by: Kever Yang
>> Acked-by: Simon Glass
>> Tested-by: Simon
On 15 October 2016 at 07:24, Simon Glass wrote:
> On 7 October 2016 at 02:05, Kever Yang wrote:
>> rk3399 has two mmc dev controller:
>> mmc 0: SD card;
>> mmc 1: EMMC
>>
>> U-Boot will scan the mmc boot device configured by CONFIG_SYS_MMC_ENV_DEV,
>> since evb has emmc on board, let's set the EM
On 15 October 2016 at 07:24, Simon Glass wrote:
> On 7 October 2016 at 03:47, Kever Yang wrote:
>> Enable ROCKCHIP_SPL_BACK_TO_BROM and disable CONFIG_SPL_MMC_SUPPORT
>> to save memory in order to enable add source code for dram capacity
>> auto-detect.
>>
>> Signed-off-by: Kever Yang
>> ---
>>
On 15 October 2016 at 07:25, Simon Glass wrote:
> On 7 October 2016 at 23:47, Jacob Chen wrote:
>> A simple introduction.
>>
>> Signed-off-by: Jacob Chen
>> Acked-by: Simon Glass
>> ---
>>
>> Changes in v3: None
>> Changes in v2: None
>>
>> doc/README.rockchip | 11 +--
>> 1 file chang
On 15 October 2016 at 07:25, Simon Glass wrote:
> On 8 October 2016 at 01:38, Kever Yang wrote:
>> Hi Jacob,
>>
>>
>> On 10/08/2016 01:47 PM, Jacob Chen wrote:
>>>
>>> Unify the partitions of each chip then it will be more easy for us to
>>> write scripts, tools or guides for rockchip chips.
>>>
On 15 October 2016 at 07:24, Simon Glass wrote:
> On 7 October 2016 at 01:56, Kever Yang wrote:
>> The Clock Multiplier in rk3399 EMMC programmable clock generator
>> is broken, we can remove its support from SoC GRF register.
>>
>> Without this patch, rk3399 emmc driver is not work after below p
On 7 October 2016 at 23:47, Jacob Chen wrote:
> A simple introduction.
>
> Signed-off-by: Jacob Chen
> Acked-by: Simon Glass
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> doc/README.rockchip | 11 +--
> 1 file changed, 9 insertions(+), 2 deletions(-)
Acked-by: Simon Glass
__
On 8 October 2016 at 01:38, Kever Yang wrote:
> Hi Jacob,
>
>
> On 10/08/2016 01:47 PM, Jacob Chen wrote:
>>
>> Unify the partitions of each chip then it will be more easy for us to
>> write scripts, tools or guides for rockchip chips.
>>
>> Those extra partitions mostly are used to be compatible
On 10 October 2016 at 11:12, Vagrant Cascadian wrote:
> On 2016-10-07, Kever Yang wrote:
>> Add support for rk3288 dram capacity auto detect, support DDR3 and
>> LPDDR3, DDR2 is not supported.
>> The program will automatically detect:
>> - channel number
>> - rank number
>> - column address number
On 7 October 2016 at 03:47, Kever Yang wrote:
> Since we implement the dram capacity auto detect, we don't
> need to set the channel number and sdram-channel in dts.
>
> Signed-off-by: Kever Yang
> Acked-by: Simon Glass
> Tested-by: Simon Glass
> Tested-by: Vagrant Cascadian
> ---
>
> Changes
On 7 October 2016 at 01:56, Kever Yang wrote:
> The Clock Multiplier in rk3399 EMMC programmable clock generator
> is broken, we can remove its support from SoC GRF register.
>
> Without this patch, rk3399 emmc driver is not work after below patch
> applied:
> 6dffdbc mmc: sdhci: Add the programma
On 7 October 2016 at 03:47, Kever Yang wrote:
> Enable ROCKCHIP_SPL_BACK_TO_BROM and disable CONFIG_SPL_MMC_SUPPORT
> to save memory in order to enable add source code for dram capacity
> auto-detect.
>
> Signed-off-by: Kever Yang
> ---
>
> Changes in v3:
> - move the config into defconfig file
>
On 7 October 2016 at 02:05, Kever Yang wrote:
> rk3399 has two mmc dev controller:
> mmc 0: SD card;
> mmc 1: EMMC
>
> U-Boot will scan the mmc boot device configured by CONFIG_SYS_MMC_ENV_DEV,
> since evb has emmc on board, let's set the EMMC as default.
>
> Signed-off-by: Kever Yang
> ---
>
>
On 7 October 2016 at 01:59, Kever Yang wrote:
> The GRF base address is missing, fix it.
>
> Signed-off-by: Kever Yang
> ---
>
> arch/arm/mach-rockchip/rk3288/rk3288.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Acked-by: Simon Glass
___
On 8 October 2016 at 01:23, Kever Yang wrote:
> SPL_MMC_SUPPORT defined in rockchip top level Kconfig instead of
> inside rk3288 and default to disable if ROCKCHIP_SPL_BACK_TO_BROM
> defined.
>
>
> Signed-off-by: Kever Yang
> ---
>
> arch/arm/mach-rockchip/rk3288/Kconfig | 3 ---
> 1 file change
Not all networks have a DHCP server configured properly, so these
scripts make it easier to boot in that scenario.
Signed-off-by: Adam Ford
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 95ff5c3..0827ebe 100644
--- a/include/configs/omap3_logic.h
+++ b/include/c
On 7 October 2016 at 20:54, Kever Yang wrote:
> Hi Simon,
>
>
> On 10/02/2016 10:04 AM, Simon Glass wrote:
>>
>> This function is called from outside the driver. It should be placed into
>> common SoC code. Move it.
>>
>> Also rename the driver symbol to be more consistent with the other
>> rockch
On 7 October 2016 at 20:55, Kever Yang wrote:
> Hi Simon,
>
>
> On 10/02/2016 10:04 AM, Simon Glass wrote:
>>
>> This function is called from outside the driver. It should be placed into
>> common SoC code. Move it.
>>
>> Signed-off-by: Simon Glass
>> ---
>>
>> Changes in v2:
>> - Rebase to mainl
On 27 September 2016 at 11:55, Simon Glass wrote:
> On 27 September 2016 at 01:48, Jacob Chen wrote:
>> clk_rk3399 is driver name, not device name
>>
>> Signed-off-by: Jacob Chen
>> ---
>>
>> drivers/clk/rockchip/clk_rk3399.c | 4 +++-
>> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> Acked
On 7 October 2016 at 20:54, Kever Yang wrote:
> Hi Simon,
>
>
> On 10/02/2016 10:04 AM, Simon Glass wrote:
>>
>> This function is called from outside the driver. It should be placed into
>> common SoC code. Move it.
>>
>> Also rename the driver symbol to be more consistent with the other
>> rockch
Hi,
On 8 October 2016 at 02:28, 陈豪 wrote:
> In patch "rk3288: config change for enable dram capacity auto-detect",
> Kever have use CONFIG_ROCKCHIP_SPL_BACK_TO_BROM to reduce spl size, so
> this patch is no longer needed.
OK, then I will drop this patch for now.
>
> 2016-09-28 23:46 GMT+08:00 S
On 27 August 2016 at 11:03, Sandy Patterson wrote:
>
>
> On Sat, Aug 27, 2016 at 12:06 PM, Simon Glass wrote:
>>
>> Hi Sandy,
>>
>> On 11 July 2016 at 11:38, Sandy Patterson
>> wrote:
>> > I am not sure why this limit is changing. But my kernel
>> > doesn't load when it's above 256. This was tes
Hi George,
On 14 October 2016 at 15:41, George McCollister
wrote:
>
> The Atmel AT97SC3204 is also TIS compliant.
> Modify the tpm_tis_lpc driver to check for the vid/did used by the
> Atmel AT97SC3204 and report an appropriate description.
>
> Signed-off-by: George McCollister
> ---
> drivers/
CONFIG_USB_MAX_CONTROLLER_COUNT not used in DM_USB, hence moved
to non-dm from global area.
Cc: Simon Glass
Cc: Marek Vasut
Cc: Masahiro Yamada
Signed-off-by: Jagan Teki
---
drivers/usb/host/ehci-hcd.c | 8
drivers/usb/host/xhci.c | 8
2 files changed, 8 insertions(+), 8
On Sat, Oct 15, 2016 at 06:23:11AM -0500, Adam Ford wrote:
> The LCD isn't supported in U-Boot and the LCD is now configured in
> the device tree, so this code is pointless.
>
> V2: Eliminiate erroneous newline.
>
> Signed-off-by: Adam Ford
>
> diff --git a/include/configs/omap3_logic.h b/incl
On Thu, Oct 06, 2016 at 07:31:45AM +0200, Heiko Schocher wrote:
> Move FDT_FIXUP_PARTITIONS to Kconfig and cleanup existing
> uses.
>
> Signed-off-by: Heiko Schocher
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
On Thu, Oct 06, 2016 at 07:55:16AM +0200, Heiko Schocher wrote:
> Move SYS_OS_BASE to Kconfig and cleanup existing
> uses.
>
> Signed-off-by: Heiko Schocher
After also fixing a4m2k (a variant of a3m071 that I guess moveconfig
missed due to it being selected via CONFIG_SYS_EXTRA_OPTIONS), applie
On Thu, Oct 06, 2016 at 07:55:15AM +0200, Heiko Schocher wrote:
> Move SPL_OS_BOOT to Kconfig and cleanup existing
> uses.
>
> Signed-off-by: Heiko Schocher
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
The LCD isn't supported in U-Boot and the LCD is now configured in
the device tree, so this code is pointless.
V2: Eliminiate erroneous newline.
Signed-off-by: Adam Ford
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index a7649ca..95ff5c3 100644
--- a/include/config
The LCD isn't supported in U-Boot and the LCD is now configured in
the device tree, so this code is pointless.
Signed-off-by: Adam Ford
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index a7649ca..ff7bf92 100644
--- a/include/configs/omap3_logic.h
+++ b/include/confi
Some boards decided not to run ATF or other secure firmware in EL3, so
they instead run U-Boot there. The uEFI spec doesn't know what EL3 is
though - it only knows about EL2 and EL1. So if we see that we're running
in EL3, let's get into EL2 to make payloads happy.
Signed-off-by: Alexander Graf
The efi loader code has its own memory map, so it needs to be aware where
the spin tables are located, to ensure that no code writes into those
regions.
Signed-off-by: Alexander Graf
---
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/cp
On ls2080 we have a separate network fabric component which we need to
shut down before we enter Linux (or any other OS). Along with that also
comes configuration of the fabric using a description file.
Today we always stop and configure the fabric in the boot script and
(again) exit it on device
Some systems may implemente TrustZone (EL3) in U-Boot. Those systems
reserve some memory that U-Boot is aware of as secure.
For those systems, mask out that secure memory in the EFI memory map,
as it's not usable from EL2 or EL1.
Signed-off-by: Alexander Graf
---
v4 -> v5:
- Use gd->arch.se
When implementing efi loader support, we can expose runtime services
for payloads. One such service is CPU reset.
This patch implements RTS CPU reset support for layerscape systems.
Signed-off-by: Alexander Graf
---
v4 -> v5:
- Use __efi_runtime tags
---
arch/arm/cpu/armv8/fsl-layerscape/c
Most new systems in U-Boot these days make use of the generic "distro"
framework which allows a user to have U-Boot scan for a bootable OS
on all available media types.
This patch extends the LS2080ARDB board to use that framework if the
hard coded NOR flash location does not contain a bootable im
We now have EFI support in U-Boot which worked out of the box on all systems
that I tried it on so far. Except for the LS2080ARDB. With this patch set
I can successfully boot grub2 and Linux from there on such a system - even
using PXE.
This patch set depends on the efi-next queue and the efi runt
The DP-DDR shouldn't be exposed as conventional memory to an OS, so let's
rather claim it's a reserved region in the EFI memory map
Signed-off-by: Alexander Graf
---
board/freescale/ls2080ardb/ls2080ardb.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/board/freescale/ls2080ardb/ls
71 matches
Mail list logo