Lokesh,
On Monday 10 April 2017 01:56 PM, Vignesh R wrote:
> It seems few config options are missing in the current
> am335x_evm_usbspl_defconfig causing USB RNDIS boot to fail on AM335x
> EVM. Fix this by adding required configs.
>
> Signed-off-by: Vignesh R
> ---
Could you ack this patch, its
On 06/07/2017 11:33 PM, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> Enable FPGA driver build for SPL because FPGA driver is needed for SPL
> to configure and getting DDR up before loading U-boot into DDR and
> booting from there.
>
> FPGA driver build on SPL must be enabled 1st
Hi Bin,
On 27.06.2017 02:01, Bin Meng wrote:
On Tue, Jun 27, 2017 at 2:07 AM, Marek Vasut wrote:
On 06/24/2017 03:57 AM, Bin Meng wrote:
Hi Marek,
On Sat, Jun 24, 2017 at 2:02 AM, Marek Vasut wrote:
On 06/23/2017 11:54 AM, Bin Meng wrote:
xHCI spec says: the values of the 'route string' f
Hi Bin,
On 27.06.2017 01:34, Bin Meng wrote:
Hi Stefan,
On Tue, Jun 27, 2017 at 2:42 AM, Simon Glass wrote:
Hi,
On 26 June 2017 at 03:11, Bin Meng wrote:
Hi Stefan,
On Mon, Jun 26, 2017 at 3:29 PM, Stefan Roese wrote:
Hi Bin,
On 24.06.2017 14:08, Bin Meng wrote:
Hi Stefan,
On Sat,
Hi,
On Monday 26 June 2017 05:12 PM, Ravi Kumar Prasad wrote:
> Hi,
>
> I'm developing a node.js usb bootloader server for the am335x (BeagleBone)
> platform which can boot it into USB mass storage mode. The server TFTPs SPL
> over usb and then TFTPs uboot (configured for ums) via SPL.
>
> The S
Hi Simon,
On 26.06.2017 20:42, Simon Glass wrote:
Hi,
On 26 June 2017 at 03:11, Bin Meng wrote:
Hi Stefan,
On Mon, Jun 26, 2017 at 3:29 PM, Stefan Roese wrote:
Hi Bin,
On 24.06.2017 14:08, Bin Meng wrote:
Hi Stefan,
On Sat, Jun 24, 2017 at 6:29 PM, Stefan Roese wrote:
Hi Simon, Hi
On 26 June 2017 at 17:36, Bin Meng wrote:
> This reverts commit ddb3ac3c716f56cead695444e65a7ba7b0946555.
>
> With MMC converted to driver model, SCSI driver is broken due to
> zero address access at (ops->read) in block_dread() function.
>
> The fix (SCSI driver converted to DM) is ready in u-boo
hi
Who's the maintainer of arch/arm/cpu/armv8? Please take a look at this issue,
thanks a lot.
Thanks,
Jay
-Original Message-
From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Cao Jie
Sent: Friday, June 23, 2017 4:36 PM
To: u-boot@lists.denx.de
Subject: [U-Boot] armv8:
Hi,
I'm developing a node.js usb bootloader server for the am335x (BeagleBone)
platform which can boot it into USB mass storage mode. The server TFTPs SPL
over usb and then TFTPs uboot (configured for ums) via SPL.
The SPL binary gets transferred successfully, but SPL can't TFTP the uboot
binary
Make make nand_info array static, since all direct users of nand_info array
have been converted to use get_nand_dev_by_index() API.
Signed-off-by: Grygorii Strashko
---
drivers/mtd/nand/nand.c | 2 +-
include/nand.h | 1 -
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/dr
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko
Reviewed-by: Hannes Schmelzer
Reviewed-by: Simon Glass
---
board/BuR/com
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko
---
drivers/dfu/dfu_nand.c | 12 +---
1 file changed, 5 insertions(
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Reviewed-by: Marcel Ziswiler
Signed-off-by: Grygorii Strashko
---
board/toradex/colibri_t20/colibri_t20.c |
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Cc: Albert Aribaud
Cc: York Sun
Signed-off-by: Grygorii Strashko
---
arch/arm/cpu/armv8/fsl-layerscape/ppa
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko
---
cmd/jffs2.c | 7 ---
1 file changed, 4 insertions(+), 3 deletions(-
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly
Signed-off-by: Grygorii Strashko
---
drivers/mtd/nand/fsmc_nand.c | 2 +-
drivers/mtd/nand/zynq_nand.c | 2 +-
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko
Reviewed-by: Joe Hershberger
---
drivers/net/fm/fm.c | 3 ++-
1 file chang
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko
---
cmd/bootm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko
---
board/ronetix/pm9261/pm9261.c | 2 +-
board/ronetix/pm9263/pm9263.c | 2
This is a preparation required for adding Nand DM support. This series
introduces new API get_nand_dev_by_index() to avoid direct acces to nand_info
array and updates u-boot to use it. As result, nand_info array is made static
in the last patch.
Changes in v4:
- rebased on top of git://git.denx.de
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko
---
board/atmel/at91sam9261ek/at91sam9261ek.c | 2 +-
board/atmel/at9
Replace direct access to struct mtd_info->priv with proper
accessor mtd_to_nand().
Signed-off-by: Grygorii Strashko
---
cmd/nand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/cmd/nand.c b/cmd/nand.c
index f2b440e..d9de978 100644
--- a/cmd/nand.c
+++ b/cmd/nand.c
@@ -128,7
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko
---
cmd/mvebu/bubt.c | 14 ++
1 file changed, 6 insertions(+),
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly
Signed-off-by: Grygorii Strashko
Reviewed-by: Joe Hershberger
---
drivers/net/phy/cortina.c | 3 ++-
1 file
From: Mugunthan V N
nand_info is used all over the file so abstract it with
get_nand_dev_by_index() which will help for DM conversion.
Signed-off-by: Mugunthan V N
Signed-off-by: Grygorii Strashko
---
cmd/nand.c | 69 +---
drivers/mtd/
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko
---
common/env_nand.c | 33 +
1 file change
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko
---
common/fb_nand.c | 2 +-
common/splash_source.c | 5 +++--
2 file
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko
---
fs/jffs2/jffs2_1pass.c | 9 +++--
fs/jffs2/jffs2_nand_1pass.c
Hi Marek,
On Tue, Jun 27, 2017 at 2:07 AM, Marek Vasut wrote:
> On 06/24/2017 03:57 AM, Bin Meng wrote:
>> Hi Marek,
>>
>> On Sat, Jun 24, 2017 at 2:02 AM, Marek Vasut wrote:
>>> On 06/23/2017 11:54 AM, Bin Meng wrote:
xHCI spec says: the values of the 'route string' field shall be
ini
Hi Marek,
On Tue, Jun 27, 2017 at 2:06 AM, Marek Vasut wrote:
> On 06/24/2017 03:53 AM, Bin Meng wrote:
>> Hi Marek,
>>
>> On Sat, Jun 24, 2017 at 1:59 AM, Marek Vasut wrote:
>>> On 06/23/2017 11:54 AM, Bin Meng wrote:
USB 3.0 hub port status field has different bit positions from 2.0
Hi Stefan,
On Tue, Jun 27, 2017 at 2:42 AM, Simon Glass wrote:
> Hi,
>
> On 26 June 2017 at 03:11, Bin Meng wrote:
>>
>> Hi Stefan,
>>
>> On Mon, Jun 26, 2017 at 3:29 PM, Stefan Roese wrote:
>> > Hi Bin,
>> >
>> >
>> > On 24.06.2017 14:08, Bin Meng wrote:
>> >>
>> >> Hi Stefan,
>> >>
>> >> On S
This reverts commit ddb3ac3c716f56cead695444e65a7ba7b0946555.
With MMC converted to driver model, SCSI driver is broken due to
zero address access at (ops->read) in block_dread() function.
The fix (SCSI driver converted to DM) is ready in u-boot-dm branch,
but it is too late for this relese to ge
On Sun, Jun 25, 2017 at 02:54:56PM -0700, Alison Chaiken wrote:
> On Sun, Jun 18, 2017 at 4:03 AM, Wolfgang Denk wrote:
>
> > Dear Alison,
> >
> > In message > gmail.com> you wrote:
> > >
> > > The idea behind the 'swap' mode is that a storage device can have two
> > sets
> > > of partitions, on
On 06/26/2017 03:22 PM, Rob Clark wrote:
This actually works on snapdragon.. not sure why we weren't using it.
Fixes reboot/poweroff when using UEFI.
Signed-off-by: Rob Clark
Reviewed-by: Alexander Graf
Alex
___
U-Boot mailing list
U-Boot@lists.
On Mon, Jun 26, 2017 at 12:24:24PM +0200, Jerome Brunet wrote:
> From the recipient list, I'm guessing this patch is addressed to the u-boot
> community, right ?
Correct.
> Would you mind stating it a bit more clearly next time ? especially if you
> include linux-amlogic list.
Yeah, I'll do next
Don't wait forever.
Pass errors back to the caller.
Signed-off-by: Joe Hershberger
---
Changes in v2:
- Isolate error propagation changes
drivers/net/ag7xxx.c | 29 -
1 file changed, 24 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ag7xxx.c b/drivers/net/
In the case of the WAN port, pay attention to the link status.
In the case of LAN ports, stop reading the link status since we don't
care.
Signed-off-by: Joe Hershberger
---
This is a pass at improving the code quality.
This has not been tested in any way.
Changes in v2:
- New - Split link stat
The register constants don't use the exact names that are used in the
TRM, so add comments that use the exact names so that it is clear what
register is being referred to.
https://www.atheros-drivers.com/qualcomm-atheros-datasheets-for-AR9331.html
Signed-off-by: Joe Hershberger
---
Changes in
On 06/26/2017 03:25 PM, Peter Robinson wrote:
> Raspberry Pi has numerous HAT and other HW expansion options such as screens
> and
> cameras some of which need overlays from the beginning so it makes sense to
> enable evice tree overlays.
>
> Signed-off-by: Peter Robinson
> ---
> configs/rpi_2_
On Mon, Jun 26, 2017 at 2:02 PM, Breno Lima wrote:
> The CST input option was replaced by -i on CST 2.3.2, so update the
> Code Signing Tool command line.
>
> Signed-off-by: Breno Lima
Thanks for the fix:
Acked-by: Fabio Estevam
___
U-Boot mailing li
On 20 June 2017 at 22:22, Heiko Schocher wrote:
>
> for debugging it is handy to know the fdt_blob
> address. So print it in bdinfo.
>
> Signed-off-by: Heiko Schocher
> ---
>
> cmd/bdinfo.c | 2 ++
> 1 file changed, 2 insertions(+)
>
Reviewed-by: Simon Glass
___
Hi,
On 26 June 2017 at 03:11, Bin Meng wrote:
>
> Hi Stefan,
>
> On Mon, Jun 26, 2017 at 3:29 PM, Stefan Roese wrote:
> > Hi Bin,
> >
> >
> > On 24.06.2017 14:08, Bin Meng wrote:
> >>
> >> Hi Stefan,
> >>
> >> On Sat, Jun 24, 2017 at 6:29 PM, Stefan Roese wrote:
> >>>
> >>> Hi Simon, Hi Bin,
>
The Odroid C2 comes with several expansion options such as an RTC module.
As these expansions are not considered in the Linux device tree they have
to be enabled via device tree overlays.
Signed-off-by: Heinrich Schuchardt
---
configs/odroid-c2_defconfig | 2 ++
1 file changed, 2 insertions(+)
On 06/24/2017 03:57 AM, Bin Meng wrote:
> Hi Marek,
>
> On Sat, Jun 24, 2017 at 2:02 AM, Marek Vasut wrote:
>> On 06/23/2017 11:54 AM, Bin Meng wrote:
>>> xHCI spec says: the values of the 'route string' field shall be
>>> initialized by the first 'Address Device' command issued to a
>>> device s
On 06/26/2017 12:13 AM, Rob Clark wrote:
>>> (the whole idea of a single static dtb for a SoC is nice in theory
>>> until you realize that complex SoC's like snapdragon are still pushing
>>> the boundaries of what we have figured out how to model in dt)
>>>
>>> BR,
>>> -R
>>>
>> Have a look at Debi
On 06/24/2017 03:53 AM, Bin Meng wrote:
> Hi Marek,
>
> On Sat, Jun 24, 2017 at 1:59 AM, Marek Vasut wrote:
>> On 06/23/2017 11:54 AM, Bin Meng wrote:
>>> USB 3.0 hub port status field has different bit positions from 2.0
>>> hubs. Since U-Boot only understands the old version, translate the
>>>
On 06/24/2017 03:41 AM, Bin Meng wrote:
> Hi Marek,
>
> On Sat, Jun 24, 2017 at 1:57 AM, Marek Vasut wrote:
>> On 06/23/2017 11:54 AM, Bin Meng wrote:
>>> Sometimes we need know if a given hub device is root hub or not.
>>> Add a new API to test this.
>>>
>>> Signed-off-by: Bin Meng
>>> ---
>>>
The CST input option was replaced by -i on CST 2.3.2, so update the
Code Signing Tool command line.
Signed-off-by: Breno Lima
---
doc/README.imx6 | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/doc/README.imx6 b/doc/README.imx6
index 0e00968..9ca2150 100644
--- a/doc/RE
> Use fixed regulator for sdmmc-pwren for sdmmc power.
>
> Signed-off-by: Kever Yang
> Acked-by: Simon Glass
> Acked-by: Philipp Tomsich
> ---
>
> Changes in v2: None
>
> arch/arm/dts/rk3328-evb.dts | 8
> 1 file changed, 8 insertions(+)
>
Reviewed-by: Philipp Tomsich
___
> SDMMC-PWREN is a pin to control voltage for SDMMC IO, it may
> be high active or low active, the dwmmc driver always assume
> the sdmmc-pwren as high active.
>
> Kernel treat this pin as fixed regulator instead of a pin from
> controller, and then it can set in dts file upon board schematic,
> t
> Enable all the boot-on regulator in default.
>
> Signed-off-by: Kever Yang
> Acked-by: Simon Glass
> Acked-by: Philipp Tomsich
> ---
>
> Changes in v2: None
>
> board/rockchip/evb_rk3328/evb-rk3328.c | 8 +++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
Reviewed-by: Philipp To
On Mon, 19 Jun 2017, Wadim Egorov wrote:
The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC.
The module can be connected to different carrier boards.
It can be also equipped with different RAM, SPI flash and eMMC variants.
The Rapid Development Kit option is using the follo
On Fri, 23 Jun 2017, Meng Dongyang wrote:
Config dwc2 driver support host and gadget function. Add support
of fastboot function.
Signed-off-by: Meng Dongyang
Reviewed-by: Simon Glass
Acked-by: Philipp Tomsich
---
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: No
> The RK818 PMIC contains a charger. Add very basic charger functionality
> to be able to regulate the USB input current and charger shutdown limits.
>
> Signed-off-by: Wadim Egorov
> Reviewed-by: Simon Glass
> Acked-by: Philipp Tomsich
> ---
> Changes in v4:
> - Added Reviewed-by: Simon Glass
> Signed-off-by: Wadim Egorov
> Acked-by: Simon Glass
> Reviewed-by: Simon Glass
> Acked-by: Philipp Tomsich
> ---
> Changes in v4:
> - Added Reviewed-by: Simon Glass
>
> doc/README.rockchip | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
Reviewed-by: Philipp Tomsich
_
> Enabling CONFIG_SPL_POWER_SUPPORT will cause a compiler warning:
> ‘get_ldo_reg’ defined but not used [-Wunused-function]
>
> Let's wrap get_ldo_reg(), rk808_ldo and rk818_ldo with ENABLE_DRIVER
> which is only set for non SPL builds.
>
> Signed-off-by: Wadim Egorov
> Reviewed-by: Simon Glas
ARC HS Development Kit board is a new low-cost
development platform sporting ARC HS38 in real silicon
with nice set of features such as:
* Quad-core ARC HS38 with 512 kB L2 cache and running @1GHz
* 4Gb of DDR (we use only lowest 1Gb out of it now)
* Lots of DesigWare peripherals
* Different co
On Sat, Jun 24, 2017 at 07:09:32PM -0400, Rob Clark wrote:
> This makes booting off the USB disks I have go from 50% reliable to 100%
> reliable. I'm no USB expert so maybe there is a better way. But one
> way or another we aren't waiting long enough after power-on for the
> usb device to be rea
We used to use the same memory layout and size for a couple of
boards and thus we just hardcoding IOC aperture start and size.
Now when we're getting more boards with more memory on board we
need to have an ability to set IOC so it matches real DDR layout
and size.
Even though it is not really a
On 12.05.2017 21:58, Tim Harvey wrote:
> There is no dedicated reset signal wired up for the MX6QDL thus if the
> bootloader enables the link we need some special handling to get the core
> back into a state where it is safe to touch it for configuration.
>
> While there has been some special han
Hello experts
For learning and education purposes, I am trying to use qemu-arm to
run u-boot. After reading online materials, my question is that if it
is possible to save the environment variables on simulated Flash
"permanently". I use raw file "pflash0.img" as simulated flash. So
far, after modi
This port adds support for:
1) Serial
2) eMMC
3) USB
It has been tested with ARM TRUSTED FIRMWARE running u-boot as the
BL33 executable [see board's README]
eMMC has been tested for reading and booting the loader and linux
kernels as well as saving the u-boot environment.
This driver is used in another board; remove board information from
the driver debug log.
Signed-off-by: Jorge Ramirez-Ortiz
---
drivers/mmc/hi6220_dw_mmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/hi6220_dw_mmc.c b/drivers/mmc/hi6220_dw_mmc.c
index fdaf1e4
Pulled from Linux 4.12-rc3
Signed-off-by: Jorge Ramirez-Ortiz
---
arch/arm/dts/hi3798cv200-poplar.dts | 162 +
arch/arm/dts/hi3798cv200.dtsi | 411
include/dt-bindings/clock/histb-clock.h | 66 +
include/dt-bindings/reset/ti-syscon.
CHIP and CHIP Pro devices have options of DIP addon boards some of which need
overlays from the beginning so it makes sense to enable device tree overlays.
Signed-off-by: Peter Robinson
---
configs/CHIP_defconfig | 2 ++
configs/CHIP_pro_defconfig | 2 ++
2 files changed, 4 insertions(+)
di
96boards CE devices such as the DragonBoard and Hikey devices have numerous
mezzanine options some of which need overlays from the beginning so it makes
sense to enable device tree overlays.
Signed-off-by: Peter Robinson
---
configs/dragonboard410c_defconfig | 2 ++
configs/hikey_defconfig
TI am33xx devices such as the BeagleBone devices have numerous cape options such
as screens some of which need overlays from the beginning so it makes sense to
enable evice tree overlays.
Signed-off-by: Peter Robinson
---
configs/am335x_boneblack_defconfig | 1 +
configs/am335x_evm_defconfig
Raspberry Pi has numerous HAT and other HW expansion options such as screens and
cameras some of which need overlays from the beginning so it makes sense to
enable evice tree overlays.
Signed-off-by: Peter Robinson
---
configs/rpi_2_defconfig | 2 ++
configs/rpi_3_32b_defconfig | 2 ++
confi
Enable Device Tree Overlays for a number of boards with widely available
expanion options such as HATs/Capes/DIPs/mezzanine.
Signed-off-by: Peter Robinson
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
This actually works on snapdragon.. not sure why we weren't using it.
Fixes reboot/poweroff when using UEFI.
Signed-off-by: Rob Clark
---
arch/arm/cpu/armv8/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index d
> From: Sjoerd Simons
>
> Add support for the gmac ethernet interface to pinctrl. This hardcodes
> the setup to match that of the firefly and Radxa Rock2 boards, using the
> RGMII phy mode for gmac interface and GPIO4B0 as the phy reset GPIO.
>
> Signed-off-by: Sjoerd Simons
> Signed-off-by: Ro
> The xhci-rockchip driver depends on DM_REGULATOR and DM_USB.
> So add dependent features for xhci-rockchip driver in Kconfig.
>
> Signed-off-by: Meng Dongyang
> Acked-by: Philipp Tomsich
> ---
>
> Changes in v7: None
> Changes in v6:
> - New patch, add depends on features for xhci-rockchip in
> Probe dwc2 udc in the function of board_usb_start to enable
> usb gadget function.
>
> Signed-off-by: Meng Dongyang
> Reviewed-by: Simon Glass
> Acked-by: Philipp Tomsich
> ---
>
> Changes in v7: None
> Changes in v6: None
> Chagnes in v5: None
> Changes in v4: None
> Changes in v3: None
>
> Enable dwc2 controller and add fixed regulator for dwc2 controller to
> control vbus.
>
> Signed-off-by: Meng Dongyang
> Reviewed-by: Simon Glass
> Acked-by: Philipp Tomsich
> ---
>
> Changes in v7: None
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3:
> - a
> Use dev_read_bool() instead of fdt_getprop() to get the property
> from DTS. And add a comment for "hnp-srp-disable" property to
> fully describe its effect.
>
> Signed-off-by: Meng Dongyang
> Acked-by: Philipp Tomsich
> ---
>
> Changes in v7:
> - Romove unused variable ‘prop’ in dwc2 driver
> Add fixed regulator for the port of typec0 and typec1 to control vbus
> instead of gpio.
>
> Signed-off-by: Meng Dongyang
> Reviewed-by: Simon Glass
> Acked-by: Philipp Tomsich
> ---
>
> Changes in v7: None
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3: No
> The driver changes gpio to fixed regulator to control vbus, so add
> fixed regulator node in DTS for xhci driver.
>
> Signed-off-by: Meng Dongyang
> Acked-by: Philipp Tomsich
> ---
>
> Changes in v7: None
> Changes in v6:
> - New patch, splited from [PATCH,v5,06/11]
>
> arch/arm/dts/rk3328-
> Use fixed regulator to control the voltage of vbus. Enable vbus
> supply when usb start and disable vbus supply when usb stop.
>
> Signed-off-by: Meng Dongyang
> Acked-by: Philipp Tomsich
> ---
>
> Changes in v7: None
> Changes in v6:
> - Remove #ifdef DM_REGULATOR and DM_USB due to the addit
since commit 842778a09104 dfu-util shows serial="UNDEFINED".
to see here again a serial number, we have to call
g_dnl_set_serialnumber().
Signed-off-by: Heiko Schocher
---
since commit 842778a091047b0c868efa12229633959f711152
Author: Felipe Balbi
Date: Wed Feb 22 17:12:40 2017 +0200
usb: ga
The following 3 Kconfig options
- CONFIG_SYS_USB_EVENT_POLL
- CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
- CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
are already converted to Kconfig. Let's clean up all board configs to
switch over to use them.
Signed-off-by: Bin Meng
---
configs/A10-OLinuXino-Lim
This series is the final series of the xHCI driver update.
This adds the missing interrupt transfer support to xHCI driver, so
that devices like USB keyboard that uses interrupt transfer when
CONFIG_SYS_USB_EVENT_POLL is defined can work.
Previous two series:
[1]: usb: xhci: Fix USB xHCI support
On Sun, 2017-06-25 at 17:55 +0200, Beniamino Galvani wrote:
> Hi,
>
> this series adds a GPIO driver for Meson GXBB and enables it on
> Odroid-C2.
>
> Beniamino Galvani (3):
> arm: dts: meson: import dts files from Linux 4.12-rc6
> pinctrl: meson: add GPIO support
> odroid-c2: enable GPIO
>
---
board/amlogic/odroid-c2/odroid-c2.c | 8
1 file changed, 8 insertions(+)
diff --git a/board/amlogic/odroid-c2/odroid-c2.c
b/board/amlogic/odroid-c2/odroid-c2.c
index 9306b56a6a..b29f56d5eb 100644
--- a/board/amlogic/odroid-c2/odroid-c2.c
+++ b/board/amlogic/odroid-c2/odroid-c2.c
@@
Hello,
For learning and education purposes, I am trying to use qemu-arm to
run u-boot. After reading online materials, my question is that if it
is possible to save the environment variables on simulated Flash
"permanently". I use raw file "pflash0.img" as simulated flash. So
far, after modify some
---
board/amlogic/odroid-c2/odroid-c2.c | 8
1 file changed, 8 insertions(+)
diff --git a/board/amlogic/odroid-c2/odroid-c2.c
b/board/amlogic/odroid-c2/odroid-c2.c
index 9306b56a6a..b29f56d5eb 100644
--- a/board/amlogic/odroid-c2/odroid-c2.c
+++ b/board/amlogic/odroid-c2/odroid-c2.c
@@
Greetings,
I'm using buildroot to generate images for the odroid c2 boards and from what I
see, it uses u-boot.bin to burn into the image.
I'm not seeing any other uboot product that is used for booting (unless I'm
mistaken).
I'm reading the odroid c2 readme file and I see it instructs the use t
Hello Lukasz,
Am 26.06.2017 um 13:04 schrieb Lukasz Majewski:
After the commit SHA1: 842778a091 - the serial number descriptor is only
visible when we have non zero length of g_dnl_serial.
However, on some platforms (e.g. Siemens) the serial number is set at
g_dnl_bind_fixup(), so with the curr
After the commit SHA1: 842778a091 - the serial number descriptor is only
visible when we have non zero length of g_dnl_serial.
However, on some platforms (e.g. Siemens) the serial number is set at
g_dnl_bind_fixup(), so with the current code we will always omit the
serial (since it is not set).
T
The choice of "USB keyboard polling" cannot be optional as without
one mechanism being set, it just doesn't work. Set the default one
to CONFIG_SYS_USB_EVENT_POLL.
Signed-off-by: Bin Meng
---
drivers/usb/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/Kco
xHCI uses normal TRBs for both bulk and interrupt. This adds the
missing interrupt transfer support to xHCI so that devices like
USB keyboard that uses interrupt transfer can work.
Signed-off-by: Bin Meng
---
drivers/usb/host/xhci.c | 13 ++---
1 file changed, 10 insertions(+), 3 deleti
On Mon, 26 Jun 2017 12:50:34 +0200
Heiko Schocher wrote:
> Hello Felipe, Lukasz,
>
> Am 26.06.2017 um 12:22 schrieb Felipe Balbi:
> >
> > Hi,
> >
> > Lukasz Majewski writes:
> >> My weekly dfu test on the siemens smartweb board failed
> >> with current HEAD.
> >>
> >
Hello Felipe, Lukasz,
Am 26.06.2017 um 12:22 schrieb Felipe Balbi:
Hi,
Lukasz Majewski writes:
My weekly dfu test on the siemens smartweb board failed with
current HEAD.
I started an automated git bisect with tbot, and found:
2017-04-19 07:24:30,717:CON:tbotlib # tb_ctrl: git
bisect
Hi,
Lukasz Majewski writes:
>> >>> My weekly dfu test on the siemens smartweb board failed with
>> >>> current HEAD.
>> >>>
>> >>> I started an automated git bisect with tbot, and found:
>> >>>
>> >>> 2017-04-19 07:24:30,717:CON:tbotlib # tb_ctrl: git
>> >>> bis
Hi Heiko,
> Hello all,
>
> Am 19.04.2017 um 14:07 schrieb Lukasz Majewski:
> > Dear All,
> >
> >> On 04/19/2017 12:39 PM, Heiko Schocher wrote:
> >>> Hello Marek,
> >>>
> >>> Am 19.04.2017 um 11:51 schrieb Marek Vasut:
> On 04/19/2017 11:46 AM, Heiko Schocher wrote:
> > Hello Marek,
> >>
Hi Christian,
On 26/06/2017 09:14, Christian Gmeiner wrote:
> 2017-06-08 9:37 GMT+02:00 Christian Gmeiner :
>> Signed-off-by: Christian Gmeiner
>> ---
>> configs/ot1200_defconfig | 2 ++
>> configs/ot1200_spl_defconfig | 2 ++
>> include/configs/ot1200.h | 3 +++
>> 3 files changed, 7 in
Hi Stefan,
On Mon, Jun 26, 2017 at 3:29 PM, Stefan Roese wrote:
> Hi Bin,
>
>
> On 24.06.2017 14:08, Bin Meng wrote:
>>
>> Hi Stefan,
>>
>> On Sat, Jun 24, 2017 at 6:29 PM, Stefan Roese wrote:
>>>
>>> Hi Simon, Hi Bin,
>>>
>>>
>>> On 12.06.2017 05:53, Simon Glass wrote:
Hi Bin,
>>
Hello Tom,
please pull from u-boot-i2c.git master
The following changes since commit 7df4ff2c2689a6d3c16eb0c3cce098fcac622b0c:
Merge branch 'master' of git://git.denx.de/u-boot-rockchip (2017-06-23
11:02:21 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git m
Kever,
> On 26 Jun 2017, at 01:03, Philipp Tomsich
> wrote:
>
>> The bank0 ram size should be the DRAM size minus reserved size,
>> the DRAM size may be 1GB, 2GB, 4GB, we can not hard code it.
>>
>> Signed-off-by: Kever Yang
>> ---
>>
>> Changes in v2:
>> - move the dram_init_banksize() from
Le 22/06/2017 à 18:19, Dr. Philipp Tomsich a écrit :
Guillaume,
On 22 Jun 2017, at 10:11, Guillaume GARDET wrote:
Revert commit 253c60a557d6740f15169a1f15772d7e64928d9b as it breaks the
return value of 'mkimage -T rkimage' and print the following error:
'./tools/mkimage: Can't print header
> Rockchip using the same bit definition for dram info and write
> to os_reg, the col and bw info is not correct and let's fix it.
>
> Signed-off-by: Kever Yang
> Reviewed-by: Simon Glass
> Acked-by: Philipp Tomsich
> ---
>
> arch/arm/mach-rockchip/rk3036/sdram_rk3036.c | 5 +++--
> 1 file ch
1 - 100 of 108 matches
Mail list logo