On 10/7/19 7:59 AM, AKASHI Takahiro wrote:
fs_close() closes the connection to a file system which opened with
either fs_set_blk_dev() or fs_set_dev_with_part(). Many file system
functions implicitly call fs_close(), e.g. fs_closedir(), fs_exist(),
fs_ln(), fs_ls(), fs_mkdir(), fs_read(),
On 10/7/19 7:59 AM, AKASHI Takahiro wrote:
fs_ls(), fs_mkdir() and fs_unlink() sets fs_type to FS_TYPE_ANY
explicitly, but it is redundant as they call fs_close().
So just remove those lines.
Signed-off-by: AKASHI Takahiro
Reviewed-by: Heinrich Schuchardt
Hi Bin,
On Fri, 11 Oct 2019 at 21:37, Simon Glass wrote:
>
> Hi Bin,
>
> On Wed, 9 Oct 2019 at 22:57, Bin Meng wrote:
> >
> > Hi Simon,
> >
> > On Wed, Sep 25, 2019 at 10:59 PM Simon Glass wrote:
> > >
> > > The Primary-to-Sideband bus (P2SB) is used to access various peripherals
> > > through
On Mon, Sep 16, 2019 at 01:47:18PM +0530, Lokesh Vutla wrote:
> From: Krunal Bhargav
>
> Before the priming begins, we need to disable RMW (Read Modify Write)
> and disable ECC verification for read accesses. By default, the EMIF
> tool enables RMW and read accesses in the EMIF_ECC_CTRL_REG.
>
On Mon, Sep 16, 2019 at 01:47:19PM +0530, Lokesh Vutla wrote:
> From: Krunal Bhargav
>
> If the ECC is enabled over the entire memory region, we need to ensure
> the printf/put calls do not modify the stack after ECC is disabled.
> Moved the printf/put statements after ECC is enabled.
>
>
On Tue, Oct 01, 2019 at 10:41:01AM +0530, Lokesh Vutla wrote:
> If there is any failure during IOdelay recalibration sequence, IOs are
> not guaranteed to behave as expected. So hang on any failure during the
> sequence.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
On Sun, Sep 29, 2019 at 05:37:58PM +0530, Lokesh Vutla wrote:
> Main uart0 is used as debug console by both R5SPL and A72 bootloader and
> Linux. So mark it as shared device so that power-domain request is
> successful by both cores.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master,
On Thu, Sep 12, 2019 at 07:19:30PM +0200, Heinrich Schuchardt wrote:
> If out of memory, return -1 and not -ENOMEM from get_contents().
>
> Signed-off-by: Heinrich Schuchardt
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Sep 27, 2019 at 01:32:12PM +0530, Lokesh Vutla wrote:
> Print the board name and ver along with the DT Model.
> While at it print the ver for all the detected daughter cards.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP
On Tue, Oct 01, 2019 at 10:41:00AM +0530, Lokesh Vutla wrote:
> When an error is reported in __recalibrate_iodelay_start(), de-isolation
> of IO doesn't happen. Because of this, undefined behaviour is observed
> on many peripherals without any error. So make sure io is out of isolation
> at the
On Thu, Sep 12, 2019 at 07:19:29PM +0200, Heinrich Schuchardt wrote:
> When hitting an invalid FAT cluster while reading a file always print an
> error message and return an error code.
>
> Signed-off-by: Heinrich Schuchardt
Applied to u-boot/master, thanks!
--
Tom
signature.asc
On Mon, Sep 16, 2019 at 01:47:17PM +0530, Lokesh Vutla wrote:
> From: Krunal Bhargav
>
> If ECC is enabled, we need to ensure interleaving is disabled for higher
> address space.
>
> Signed-off-by: Krunal Bhargav
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
On Wed, Sep 04, 2019 at 04:01:40PM +0530, Lokesh Vutla wrote:
> The J721E SoCs have a single TMS320C71x DSP Subsystem in the MAIN
> voltage domain containing the next-generation C711 CPU core. The
> subsystem has 32 KB of L1D configurable SRAM/Cache and 512 KB of
> L2 configurable SRAM/Cache.
On Wed, Sep 04, 2019 at 04:01:50PM +0530, Lokesh Vutla wrote:
> From: Kedar Chitnis
>
> The A72 U-Boot code loads and boots a number of remote processors
> including the C71x DSP, both the C66_0 and C66_1 DSPs, and the various
> Main R5FSS Cores. In order to view the code loaded by the U-Boot
On Wed, Sep 04, 2019 at 04:01:37PM +0530, Lokesh Vutla wrote:
> The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS)
> subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within
> the MCU domain, and the remaining two clusters are present in the
> MAIN domain (MAIN_R5FSS0 &
On Wed, Sep 04, 2019 at 04:01:51PM +0530, Lokesh Vutla wrote:
> Add README file explaining the build and boot procedure for J721E evm.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Wed, Sep 04, 2019 at 04:01:30PM +0530, Lokesh Vutla wrote:
> Introduce a common remoteproc elf loader and checker functions that
> automatically detects the 64 bit elf file or 32 bit elf file and
> loads/checks the sections accordingly.
>
> Signed-off-by: Lokesh Vutla
> Reviewed-by: Fabien
On Mon, Sep 30, 2019 at 06:24:06PM +0530, Lokesh Vutla wrote:
> spl_dm_init is failing as usb to be probed with the following error:
> "omap_dwc3@483c: ret=-2"
> Enable usb to make spl boot on am43xx devices
>
> Reported-by: Tero Kristo
> Signed-off-by: Lokesh Vutla
Applied to
On Wed, Sep 04, 2019 at 04:01:33PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> The Texas Instruments K3 family of SoCs have one of more dual-core
> Arm Cortex R5F processor subsystems/clusters (R5FSS). Add the device
> tree bindings document for these R5F subsystem devices. These R5F
>
On Tue, Sep 17, 2019 at 02:25:38PM +,
bollavarapumoses.christop...@in.bosch.com wrote:
> From: Moses Christopher
>
> - update partition table - remove env partitions
> - dts: add new interfaces (uart2, extra gpio-key)
> remove unneeded entries
> update nand timings
On Wed, Sep 04, 2019 at 04:01:27PM +0530, Lokesh Vutla wrote:
> Introduce a new parameter "size" that accepts size of the region to
> remoteproc ops callback device_to_virt(). This can enforce more checks
> on the region that device_to_virt() is dealing with.
>
> Signed-off-by: Lokesh Vutla
>
On Wed, Sep 04, 2019 at 04:01:36PM +0530, Lokesh Vutla wrote:
> Certain SoCs with K3 architecture have integrated a C66 Corepac DSP
> subsystem and an advanced C71 DSPs. Introduce a remoteproc driver
> that that does take care of loading an elf to any of the specified
> DSPs and start it.
>
>
On Wed, Sep 04, 2019 at 04:01:28PM +0530, Lokesh Vutla wrote:
> rproc_elf32_load_image() rely on user to send a valid address for elf loading.
> Instead do a sanity check on the address passed by user. This will help
> all rproc elf users to not call sanity_check explicitly before calling
>
On Mon, Sep 16, 2019 at 01:47:16PM +0530, Lokesh Vutla wrote:
> ecc_address_range registers contains the start address and end address
> of the DDR address space. But the ddr cmd driver is assuming the register
> contains the start address and size of the DDR address space. Because
> of this some
On Wed, Oct 02, 2019 at 12:24:46PM +0200, Marek Szyprowski wrote:
> Add support for quad (64bits) memory access specifier.
>
> Signed-off-by: Marek Szyprowski
> Acked-by: Lukasz Majewski
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Thu, Sep 12, 2019 at 07:09:26PM +0200, Heinrich Schuchardt wrote:
> If an exception occurs in a loaded image and the relocation offset is
> unknown, it is helpful to know the instructions pointed to by the
> program counter. This patch adds the missing output.
>
> A possible output is:
>
On Tue, Sep 17, 2019 at 02:25:37PM +,
bollavarapumoses.christop...@in.bosch.com wrote:
> From: Moses Christopher
>
> - add BOARD_LATE_INIT function calls in board.c
> - add swi_status detection in board.c
> - mux: add guardian interfaces to single pinmux structure
> - am33xx,
On Wed, Sep 04, 2019 at 04:01:38PM +0530, Lokesh Vutla wrote:
> The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS)
> subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within
> the MCU domain, and the remaining two clusters are present in the
> MAIN domain (MAIN_R5FSS0 &
On Thu, Aug 15, 2019 at 03:55:28PM -0500, Andreas Dannenberg wrote:
> Implement an early console functionality in SPL that can be used before
> the main console is being brought up. This helps in situations where the
> main console is dependent on System Firmware (SYSFW) being up and running,
>
On Thu, Aug 15, 2019 at 03:55:30PM -0500, Andreas Dannenberg wrote:
> Although we currently use the MAIN_UART0 for R5 SPL console output there
> are cases where we require access to the MCU_UART0 as well for example in
> case of UART-based Y-Modem boot. To support these scenarios add related
>
On Mon, Sep 30, 2019 at 08:42:21PM +0300, Jarkko Nikula wrote:
> Currently "bootcmd" does not work as intended but instead prints MMC usage
> information and goes directly to "nandboot".
>
> Follow what the commit 669681104daa ("configs: Fix usage of mmc rescan")
> does for other boards prior to
On Tue, Sep 17, 2019 at 03:40:25PM -0400, Andrew F. Davis wrote:
> When running 'run_fit' the FIT file should have been loaded at
> 'addr_fit', although at this point they should be the same
> use this variable instead of 'loadaddr'.
>
> Signed-off-by: Andrew F. Davis
Applied to u-boot/master,
On Fri, Sep 27, 2019 at 01:32:15PM +0530, Lokesh Vutla wrote:
> Use the driver name to get ti_sci handle rather than relying
> on just the FIRMWARE uclass.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Thu, Aug 15, 2019 at 03:55:31PM -0500, Andreas Dannenberg wrote:
> Activate early console functionality on AM654x devices to allow for an
> alternate serial port to be used to support UART-based boot. This is so
> that System Firmware (SYSFW) can get loaded over the serial port prior
> to the
On Thu, Sep 19, 2019 at 04:18:39PM +0200, Philippe Reynes wrote:
> This commit add a generic function board_init_f that
> only initialize some device (for example serial). It
> avoid to define a board function only to launch the
> serial configuration.
>
> Signed-off-by: Philippe Reynes
On Wed, Sep 04, 2019 at 04:01:26PM +0530, Lokesh Vutla wrote:
> Add a function to count the available children of a device.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
On Thu, Aug 15, 2019 at 03:55:29PM -0500, Andreas Dannenberg wrote:
> In order to allow booting TI K3 family SoCs via Y-Modem add support for
> loading System Firmware by tapping into the associated SPL core loader
> function.
>
> In this context also make sure a console is available and if not
On Wed, Sep 04, 2019 at 04:01:46PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> The A72 U-boot can support early booting of any of the R5F or C66x
> or C71x remote processors from U-boot prompt to achieve various system
> usecases before booting the Linux kernel. Update the default
On Wed, Sep 04, 2019 at 04:01:41PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> The AM65x SoCs has a single dual-core Arm Cortex-R5F processor
> subsystem/cluster (MCU_R5FSS0) within the MCU domain. This cluster
> can be configured at boot time to be either run in a LockStep mode
> or in
On Wed, Sep 04, 2019 at 04:01:29PM +0530, Lokesh Vutla wrote:
> The current rproc-elf-loader supports loading of only 32 bit elf files.
> Introduce support for loading of 64 bit elf files in rproc-elf-loader.
>
> Signed-off-by: Lokesh Vutla
> Reviewed-by: Fabien Dessenne
Applied to
On Fri, Sep 27, 2019 at 01:32:11PM +0530, Lokesh Vutla wrote:
> Add support for printing CPU info for all K3 devices.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot
On Thu, Aug 22, 2019 at 12:26:52PM +0200, Frank Wunderlich wrote:
> From: Ryder Lee
>
> This follows the linux header rules to avoid conflict bitfields.
>
> Tested-by: Frank Wunderlich
> Signed-off-by: Ryder Lee
> Signed-off-by: Frank Wunderlich
Applied to u-boot/master, thanks!
--
Tom
On Tue, Sep 24, 2019 at 01:17:16PM +0530, Lokesh Vutla wrote:
> Power-domain is enabled by default in device_probe. am654 mmc driver
> is enabling power-domain again in probe. As the second call is
> redundant, drop power_domain_on from probe.
>
> Tested-by: Suman Anna
> Signed-off-by: Lokesh
On Wed, Sep 04, 2019 at 04:01:31PM +0530, Lokesh Vutla wrote:
> Introduce rproc_elf_get_boot_addr() that returns the entry point of
> the elf file. This api auto detects the 64/32 bit elf file and returns
> the boot addr accordingly.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master,
On Thu, Aug 22, 2019 at 12:26:53PM +0200, Frank Wunderlich wrote:
> From: Ryder Lee
>
> This adds a document for MT7623 PCIe controller.
>
> Signed-off-by: Ryder Lee
> Signed-off-by: Frank Wunderlich
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Wed, Sep 04, 2019 at 04:01:47PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> Enable the R5F remoteproc driver for the AM65x GP EVM so that the
> MCU domain R5F cores can be booted from A53 U-boot.
>
> Signed-off-by: Suman Anna
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master,
On Wed, Sep 04, 2019 at 04:01:42PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> Add a new file include/environment/ti/k3_rproc.h that defines
> common environment variables useful for booting various remote
> processors from U-Boot. This file is expected to be included in
> the board
On Fri, Sep 27, 2019 at 07:14:27PM +0300, Tero Kristo wrote:
> AM57xx-IDK boards contain the CDCE913 clock synthesizer, and their
> reset crystal capacitance load value of 10pF is wrong leading into
> lost packets in certain networking tests. Add DT data for this
> device, and probe it from the
On Wed, Sep 04, 2019 at 04:01:43PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> Add support to boot some remoteprocs at U-boot prompt on the J721E EVM
> boards by using the 'boot_rprocs' and other env variables defined in the
> common environment file k3_rproc.h, and updating the
On Wed, Sep 04, 2019 at 04:01:49PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> The A53 U-Boot code can load and boot the MCU domain R5F cores (either a
> single core in LockStep mode or 2 cores in Split mode) to achieve various
> early system functionalities. Change the memory attributes
On Fri, Sep 27, 2019 at 07:14:29PM +0300, Tero Kristo wrote:
> AM335x-ICE boards contain the CDCE913 clock synthesizer, and their
> reset crystal capacitance load value of 10pF is wrong leading into
> lost packets in certain networking tests. Add DT data for this
> device, and probe it from the
On Fri, Sep 27, 2019 at 07:14:26PM +0300, Tero Kristo wrote:
> Add support for CDCE913/925/937/949 family of devices. These are modular
> PLL-based low cost, high performance, programmable clock synthesizers,
> multipliers and dividers. They generate up to 9 output clocks from a
> single input
On Wed, Sep 25, 2019 at 02:38:05PM +0530, Lokesh Vutla wrote:
> AM65x uses TISCI protocol to reset the device and does not
> support PSCI reset. So disable PSCI reset.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Wed, Sep 04, 2019 at 04:01:39PM +0530, Lokesh Vutla wrote:
> The J721E SoCs have two TMS320C66x DSP Core Subsystems (C66x CorePacs)
> in the MAIN voltage domain, each with a C66x Fixed/Floating-Point DSP
> Core, and 32 KB of L1P & L1D configurable SRAMs/Cache and an additional
> 288 KB of L2
On Thu, Aug 22, 2019 at 12:26:54PM +0200, Frank Wunderlich wrote:
> From: Ryder Lee
>
> This adds a document for tphy which supports physical layer
> functionality for a number of controllers on MediaTek SoCs,
> such as, USB2.0, USB3.0, PCIe, and SATA.
>
> Signed-off-by: Ryder Lee
>
On Thu, Aug 22, 2019 at 12:26:55PM +0200, Frank Wunderlich wrote:
> From: Oleksandr Rybalko
>
> Tested-by: Frank Wunderlich
> Signed-off-by: Frank Wunderlich
> Signed-off-by: Oleksandr Rybalko
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Sep 27, 2019 at 07:14:28PM +0300, Tero Kristo wrote:
> AM43xx-IDK boards contain the CDCE913 clock synthesizer, and their
> reset crystal capacitance load value of 10pF is wrong leading into
> lost packets in certain networking tests. Add DT data for this
> device, and probe it from the
On Fri, Sep 27, 2019 at 01:32:14PM +0530, Lokesh Vutla wrote:
> Enable CONFIG_DISPLAY_CPUINFO so that cpuinfo is printed during boot.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Mon, Sep 16, 2019 at 01:47:15PM +0530, Lokesh Vutla wrote:
> ecc_address_range registers contains the start address and end address
> of the DDR address space. But the ddr driver is assuming the register
> contains the start address and size of the DDR address space. Because
> of this the ecc
On Wed, Sep 04, 2019 at 04:01:34PM +0530, Lokesh Vutla wrote:
> SoCs with K3 architecture have an integrated Arm Cortex-R5F subsystem
> that is comprised of dual-core Arm Cortex-R5F processor cores. This R5
> subsytem can be configured at boot time to be either run in a LockStep
> mode or in an
On Wed, Sep 11, 2019 at 03:39:53PM +0200, Michal Simek wrote:
> From: T Karthik Reddy
>
> This patch uses auto instead of decimal in simple_strtoul().
>
> Signed-off-by: T Karthik Reddy
> Signed-off-by: Michal Simek
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP
On Thu, Aug 22, 2019 at 12:26:49PM +0200, Frank Wunderlich wrote:
> From: Ryder Lee
>
> This adds PCIe controller support for MT7623.
> This is adapted from the Linux version.
>
> Tested-by: Frank Wunderlich
> Signed-off-by: Ryder Lee
> Signed-off-by: Frank Wunderlich
Applied to
On Wed, Aug 14, 2019 at 03:18:39PM +0200, Philippe Reynes wrote:
> This commit add a hsspi controller in the bcm6858 device tree.
>
> Signed-off-by: Philippe Reynes
> Reviewed-by: Kursad Oney
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Mon, Aug 26, 2019 at 01:50:31PM +0200, Patrice Chotard wrote:
> Regulator should not be enabled at probe time if regulator-boot-on
> property is not in the dt node.
>
> "enable-active-high" property is only used to indicate the GPIO
> polarity.
>
> See kernel documentation :
> -
On Wed, Sep 04, 2019 at 04:01:35PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> Some Texas Instruments K3 family of SoCs have one of more Digital Signal
> Processor (DSP) subsystems that are comprised of either a TMS320C66x
> CorePac and/or a next-generation TMS320C71x CorePac processor
On Tue, Sep 03, 2019 at 04:16:50PM +0200, Lukasz Majewski wrote:
> From: Mans Rullgard
>
> This change allows setting pre-defined eMMC boot partition for SPL eMMC
> booting. It is necessary in the case when one wants to boot (through falcon
> boot) from eMMC after loading SPL from other memory
On Thu, Aug 15, 2019 at 03:55:27PM -0500, Andreas Dannenberg wrote:
> Expose SPL's Y-Modem core loader function via the common SPL header
> file so it can be re-used for purposes other than loading U-Boot itself.
>
> Signed-off-by: Andreas Dannenberg
Applied to u-boot/master, thanks!
--
Tom
On Thu, Aug 15, 2019 at 03:55:32PM -0500, Andreas Dannenberg wrote:
> am65x ROM support booting over UART. And U-Boot built for am65x EVM
> supports UART boot as well. Add the UART boot procedure into the README
> also providing a corresponding example command sequence for execution
> on a host
On Wed, Sep 25, 2019 at 02:38:13PM +0530, Lokesh Vutla wrote:
> J721E uses TISCI protocol to reset the device and does not
> support PSCI reset. So disable PSCI reset.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Wed, Aug 14, 2019 at 03:18:38PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> This commit enable the support of the spi-nor for the
> broadcom reference board bcm963158.
>
> Signed-off-by: Kursad Oney
> Reviewed-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
On Thu, Aug 22, 2019 at 12:26:50PM +0200, Frank Wunderlich wrote:
> From: Ryder Lee
>
> The driver provides PHY for USB2, USB3.0, PCIe and SATA, and now
> we just enable PCIe. As for the other functionalities will be
> added gradually in upcoming days.
>
> This is adapted from the Linux
On Wed, Sep 04, 2019 at 04:01:48PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> The A53 U-boot can support early booting of the MCU R5F remote processor(s)
> from U-boot prompt to achieve various system usecases before booting the
> Linux kernel. Update the default BOOTCOMMAND to provide
On Tue, Sep 10, 2019 at 08:51:54AM +, Rasmus Villemoes wrote:
> readb is unconditionally defined earlier in io.h, so there's no point
> checking whether it's undefined.
>
> Signed-off-by: Rasmus Villemoes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Mon, Sep 09, 2019 at 12:06:46PM +0200, Lukasz Majewski wrote:
> This define indicates if DM_SPI shall be supported in SPL. This allows
> proper operation of DM converted SPI drivers in SPL, which use
> #if !CONFIG_IS_ENABLED(DM_SPI) to also support not yet DM/DTS converted
> boards.
>
>
On Thu, Aug 22, 2019 at 12:26:51PM +0200, Frank Wunderlich wrote:
> From: Ryder Lee
>
> This adds PCIe and its PHY nodes for MT7623.
>
> Tested-by: Frank Wunderlich
> Signed-off-by: Ryder Lee
> Signed-off-by: Frank Wunderlich
Applied to u-boot/master, thanks!
--
Tom
signature.asc
On Thu, Aug 15, 2019 at 03:55:26PM -0500, Andreas Dannenberg wrote:
> During FIT reading through ymodem_read_fit() the function
> xyzModem_stream_read() is being used which returns zero once the end
> of a stream has been reached. This could lead to an premature exit from
> ymodem_read_fit() with
On Wed, Sep 04, 2019 at 04:01:45PM +0530, Lokesh Vutla wrote:
> Enable R5F and DSP remoteproc drivers for j721e running on a72.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
On Tue, Sep 10, 2019 at 08:51:53AM +, Rasmus Villemoes wrote:
> No ARM board seems to define __mem_pci - and if it did, one would get tons of
>
> ./arch/arm/include/asm/io.h:307:0: warning: "readl" redefined
>
> warnings, because readl and friends are unconditionally defined
> earlier in
On Wed, Sep 04, 2019 at 04:01:32PM +0530, Lokesh Vutla wrote:
> Power domain for the remote cores needs to be handled in a right
> sequence as mandated by the spec. Introduce tisci helper apis
> that can control power-domains of remote cores. TISCI clients
> can use this api and control the
On Fri, Sep 27, 2019 at 01:32:13PM +0530, Lokesh Vutla wrote:
> Enable CONFIG_DISPLAY_CPUINFO so that cpuinfo is printed during boot.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Wed, Aug 14, 2019 at 03:18:41PM +0200, Philippe Reynes wrote:
> This commit enable the support of the spi-nor for the
> broadcom reference board bcm968580xref.
>
> Signed-off-by: Philippe Reynes
> Reviewed-by: Kursad Oney
Applied to u-boot/master, thanks!
--
Tom
signature.asc
On Wed, Aug 14, 2019 at 03:18:36PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> This change adds the hsspi controller to the 63158 dtsi.
>
> Signed-off-by: Kursad Oney
> Reviewed-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP
On Wed, Sep 04, 2019 at 04:01:44PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> Add support to boot the MCU domain R5F Core0 remoteproc at U-boot prompt
> on the AM65x EVM boards by using the 'boot_rprocs' and other env variables
> defined in the common environment file k3_rproc.h, and
On Wed, Aug 14, 2019 at 03:18:37PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> This change adds a spi nor flash device to the bcm963158 board.
>
> Signed-off-by: Kursad Oney
> Reviewed-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP
On Thu, Aug 22, 2019 at 12:26:56PM +0200, Frank Wunderlich wrote:
> From: Oleksandr Rybalko
>
> In 32bits mode upper bits need to be set to 0, otherwise controller will
> try to DMA into not existing memory and stops with error.
>
> Tested-by: Frank Wunderlich
> Signed-off-by: Frank
On Wed, Aug 14, 2019 at 03:18:40PM +0200, Philippe Reynes wrote:
> This commit add a spi-nor device in the bcm96850xref device tree.
>
> Signed-off-by: Philippe Reynes
> Reviewed-by: Kursad Oney
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Tue, Sep 03, 2019 at 04:17:17PM +0200, Lukasz Majewski wrote:
> From: Mans Rullgard
>
> This fixes a wrongly indented block of code.
>
> Signed-off-by: Mans Rullgard
> [lukma: Make the commit message more verbose]
> Signed-off-by: Lukasz Majewski
Applied to u-boot/master, thanks!
--
On Wed, Aug 14, 2019 at 03:18:32PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> This IP exists in both MIPS and ARM cores, so we also
> allow to use this driver on bcm6858 and bcm63158.
>
> Signed-off-by: Kursad Oney
> Reviewed-by: Philippe Reynes
> Reviewed-by: Daniel Schwierzeck
On Wed, Aug 14, 2019 at 03:18:34PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> Make the driver compatible with both big and little endian SOCs.
> Replace big-endian calls with their raw equivalents, expect for
> writing the command to FIFO. That still has to be in big-endian
> format.
On Wed, Aug 14, 2019 at 03:18:35PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> The Broadcom ARM implementations do not yet have a clock framework so
> one can use a fixed clock as the root clock of the hsspi block. The
> fixed clock does not have an "enable" routine, since it's always
On Wed, Aug 14, 2019 at 03:18:33PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> wait_for_bit_le32 and wait_for_bit_le16 use the raw I/O functions
> which would default to big-endian on BE systems. Create the generic
> equivalents to use the native endianness.
>
> Signed-off-by: Kursad
On Fri, Oct 11, 2019 at 10:49:59PM +0800, Bin Meng wrote:
> Hi Tom,
>
> This PR includes the following changes:
>
> - Remember the device being emulated for Sandbox PCI
> - Update Kconfig options for FSP 1.0
> - Drop RESET_BASE and RESET_SEG_SIZE that are no longer used
>
> The following
Hi,
I tried to find more information about configure u-boot for booting
multiple UBI volumes on imx6, but seems to me that information is
really sparse.
There was a proposal by Wolfgang Denk many years ago at
https://elinux.org/Boot_U-Boot_from_UBI_volume, and I could not find
anyone talked
On 10/7/19 7:59 AM, AKASHI Takahiro wrote:
Currently, a whole disk without any partitions is not associated
with EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. So even if it houses some
file system, there is a chance that we may not be able to access
it, particularly, when accesses are to be attempted after
Hi Peter,
On Wed, 9 Oct 2019 at 16:50, Peter Robinson wrote:
>
> The SPL is now running at SDRAM, and 0x1 is used by BL31,
> and the ARM SPL do not support relocate now, we need reserved
> 0x5 so that it won't overwrite the code when we load the
> bl31 to target space.
> We should remove
Hi Bin,
On Fri, 11 Oct 2019 at 23:18, Bin Meng wrote:
>
> Hi Simon,
>
> On Sat, Oct 12, 2019 at 11:38 AM Simon Glass wrote:
> >
> > Hi Bin,
> >
> > On Fri, 11 Oct 2019 at 07:19, Bin Meng wrote:
> > >
> > > Hi Simon,
> > >
> > > On Fri, Oct 11, 2019 at 1:06 AM Simon Glass wrote:
> > > >
> > >
Hi Bin,
On Fri, 11 Oct 2019 at 22:48, Bin Meng wrote:
>
> Hi Simon,
>
> On Sat, Oct 12, 2019 at 11:38 AM Simon Glass wrote:
> >
> > Hi Bin,
> >
> > On Thu, 10 Oct 2019 at 03:50, Bin Meng wrote:
> > >
> > > Hi Simon,
> > >
> > > On Wed, Sep 25, 2019 at 10:59 PM Simon Glass wrote:
> > > >
> > >
Hi,
2019-10 is now released so i want to remember on this series. Just to be inside
merge window...
Regards Frank
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On 10/3/19 8:01 PM, Heinrich Schuchardt wrote:
On 10/3/19 7:09 PM, Tom Rini wrote:
On Thu, Oct 03, 2019 at 07:01:22PM +0200, Heinrich Schuchardt wrote:
struct ip_udp_hdr is naturally packed. There is no point in adding a
__packed attribute. With the attribute the network stack does not
On Fri, 2019-10-04 at 15:30 -0700, Dalon Westergreen wrote:
> From: Dalon Westergreen
>
> Add a script to process hps handoff data and generate a header
> for inclusion in u-boot specific devicetree addons. The header
> should be included in the top level u-boot.dtsi.
>
> Signed-off-by: Dalon
1 - 100 of 116 matches
Mail list logo
