On Wednesday, January 04, 2012 01:22:29 AM you wrote:
On Tue, Jan 3, 2012 at 2:50 PM, Peter Bigot big...@acm.org wrote:
On Tue, Jan 3, 2012 at 2:24 PM, Tom Rini tr...@ti.com wrote:
With certain SD cards the code detects a timeout when the hardware
has not timed out. We change the timeout
configurations [6]
V2 - V3
* modify omap_rev_string [6]
* CONFIG_SYS_TEXT_BASE back to 0x80008000 [7]
* modify CONFIG_SYS_SPL_MALLOC_START / CONFIG_SYS_SPL_MALLOC_SIZE /
CONFIG_SPL_BSS_START_ADDR to avoid conflicts with CONFIG_SYS_TEXT_BASE [7]
Andreas Müller (7):
drivers/i2c/omap24xx_i2c.c: replace
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
drivers/i2c/omap24xx_i2c.c | 12 ++--
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 4ae237a..271ed60 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b
* remove unused macros
* remove unused macro values
* align tabs
* remove Free Software Foundation address
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
include/configs/omap3_overo.h | 69 ++--
1 files changed, 31 insertions(+), 38 deletions
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
board/overo/overo.c | 14 +++---
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 3c60b06..4a20c7f 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -119,7
.
By this patch it is ensured that all variables used by omap24xx_i2c.c are
located in SRAM.
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
drivers/i2c/omap24xx_i2c.c | 13 +
1 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
arch/arm/cpu/armv7/omap-common/spl.c |2 --
arch/arm/cpu/armv7/omap3/board.c |2 ++
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c
b/arch/arm/cpu/armv7/omap-common/spl.c
index
* avoid potential buffer overflows
* allow SPL-build not to output Texas Instruments Revision detection
unimplemented
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 10 --
arch/arm/cpu/armv7/omap-common/spl.c | 10
* implementation based on ti beagleboard/omap3evm
* timing data and i2c workaround for revision 0 boards taken from x-loader
* run-tested with overo revision 0 and 1 / boot from NAND and SDcard
* run-tested with x-loader
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
arch/arm/include/asm
On Wednesday, January 04, 2012 01:22:29 AM Peter Bigot bigotp at acm.org
wrote:
I got this to work with two changes:
* s/MMC_TIMEOUT_USEC/MMC_TIMEOUT_MSEC/g and define MMC_TIMEOUT_MSEC
20, since get_timer does operate on msec in the current meta-ti
BeagleBoard-xM
* The patch below, which
On Tuesday, January 03, 2012 05:23:34 PM Tom Rini tom.r...@gmail.com wrote:
On Thu, Dec 22, 2011 at 4:04 AM, Andreas Müller schnitzelt...@gmx.de wrote:
I manually sent this series to Steve as suggested in review by Tom
Parts 1 to 5 are fine and I've sent my comments on 6, thanks!
Tom,
1-5
On Monday, January 16, 2012 05:34:12 PM Philip Balister wrote:
I built u-boot with this change reverted and compared the amount of time
it took to build sip from source.
Reverting the change improved compile time by about a factor of four, so
it looks like the kernel does not properly
On Wednesday, January 11, 2012 04:34:05 PM Tom Rini trini at ti.com wrote:
I ordered the same card Peter sees failure on and it arrived
yesterday. I'm formatting it now and will see if I can duplicate the
problem here today.
ping?
Andreas
___
U-Boot
.
Tested-by: Peter A. Bigot big...@acm.org
Tested-by: Robert Nelson robertcnel...@gmail.com
Signed-off-by: Tom Rini tr...@ti.com
Tested-by: Andreas Müller schnitzelt...@googlemail.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de
Hi,
hope somebody here might help:
I have tried with many combinations of
u-boot: 2011.09 / 2011.07
kernel 3.2.19 / 3.5 / 3.6rc3
gumstix OveroWater (TI OMAP 3530) / OveroFireStorm (TI DM3730))
All tested combinations share the same bug: As soon as I activate
governor 'ondemand' and try to
* implemenatation based on ti beagleboard/omap3evm
* timing data taken from x-loader
* run-tested with overo release 0 and 1 / boot from NAND and SDcard
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
arch/arm/include/asm/arch-omap3/mem.h | 27
board/overo/config.mk
On Wednesday, December 14, 2011 06:24:13 PM you wrote:
I think you will also need to update the get_board_revision function
to ensure that SPL works with very early Overo revisions.
Note this excerpt from the X-loader get_board_revision funtion:
/* board revisions = R2410 connect
On Wednesday, December 14, 2011 06:24:13 PM Steve Sakoman wrote:
I think you will also need to update the get_board_revision function
to ensure that SPL works with very early Overo revisions.
Note this excerpt from the X-loader get_board_revision funtion:
/* board revisions = R2410
On Thursday, December 15, 2011 10:12:59 PM Andreas Müller wrote:
On Thu, Dec 15, 2011 at 7:34 AM, Andreas Müller schnitzelt...@gmx.de wrote:
I tried the following (as you can see I already commented out the
i2c-read-
write
for test):
int get_board_revision(void)
{
#ifdef
On Tuesday, December 20, 2011 02:08:18 AM Tom Rini wrote:
'objdump -dSt' shows (the memory mappings I attached were not really
helpful - sorry next time I know):
4020ae14 l O .data 0004 i2c_base
8068 l O .bss 0004 current_bus
806c l O
On Tuesday, December 20, 2011 12:41:08 PM you wrote:
Dear Tom Rini,
In message CA+M6bXn_ZBqA8rosE4L4O+4Eu+grAhWgCZ=u=2Nomb6WcyL6-
w...@mail.gmail.com you wrote:
I guess you really, really must use i2c before relocation? =A0If
possible, this should be avoided in the first place.
Yes,
On Tuesday, December 20, 2011 01:06:07 PM you wrote:
Dear Andreas,
In message 201112201253.46991.schnitzelt...@gmx.de you wrote:
I agree to your concerns but - as I understood Steve Sakoman - here the
situation is slightly different:
I think you misunderstand.
Yes I think too :-)
At
On Tuesday, December 20, 2011 02:55:50 PM you wrote:
On Tue, Dec 20, 2011 at 4:20 AM, Igor Grinberg grinb...@compulab.co.ilwrote:
What about forging some very not optimized default DRAM settings,
that suit any assembled DRAM and then when you have I2C access,
reconfigure it - is it
* OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz
Die ID #112404035c140101b011
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
drivers/mmc/omap_hsmmc.c |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
drivers/i2c/omap24xx_i2c.c | 12 ++--
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 4ae237a..271ed60 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b
configurations [6]
Andreas Müller (6):
drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts
board/overo/overo.c: replace printf with one argument by puts
include/configs/omap3_overo.h: several cleanups
drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM
OMAP SPL: call
* remove unused macros
* remove unused macro values
* align tabs
* remove Free Software Foundation address
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
include/configs/omap3_overo.h | 69 ++--
1 files changed, 31 insertions(+), 38 deletions
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
board/overo/overo.c | 14 +++---
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 3c60b06..4a20c7f 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -119,7
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
arch/arm/cpu/armv7/omap-common/spl.c |2 --
arch/arm/cpu/armv7/omap3/board.c |2 ++
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c
b/arch/arm/cpu/armv7/omap-common/spl.c
index
.
By this patch it is ensured that all variables used by omap24xx_i2c.c are
located in SRAM.
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
drivers/i2c/omap24xx_i2c.c | 13 +
1 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c
* implementation based on ti beagleboard/omap3evm
* timing data and i2c workaround for revision 0 boards taken from x-loader
* run-tested with overo revision 0 and 1 / boot from NAND and SDcard
Signed-off-by: Andreas Müller schnitzelt...@gmx.de
---
arch/arm/cpu/armv7/omap-common/spl.c |4
I manually sent this series to Steve as suggested in review by Tom
Andreas
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi,
grepping current master for tx51 gives:
arch/arm/include/asm/mach-types.h:#define MACH_TYPE_TX51 2529
arch/arm/include/asm/mach-types.h:#ifdef CONFIG_MACH_TX51
arch/arm/include/asm/mach-types.h:# define machine_arch_type MACH_TYPE_TX51
arch/arm/include/asm/mach-types.h:#
On Fri, Jun 21, 2013 at 6:20 PM, Stephen Warren swar...@wwwdotorg.org wrote:
On 06/21/2013 05:05 AM, Jim Lin wrote:
Add DT node for USB EHCI function.
Add support for T30-Cardhu, T30-Beaver, T114-Dalmore boards.
Changes in v5:
- Move changes on fdtdec.h and fdtdec.c to patch 2/3
- Modify
34 matches
Mail list logo
