On Fri, Sep 12, 2014 at 4:53 AM, Stefano Babic wrote:
> I try to sumarize the result of the discussion. This file was
> factorized, but it was proofed that calibration data are very board
> specific, and factorizing this file is not correct. I agree with Fabio
> and Eric that it is very unlike to
Hi everybody,
On 02/09/2014 01:51, Fabio Estevam wrote:
> On Mon, Sep 1, 2014 at 8:34 PM, Eric Nelson
> wrote:
>
>> I believe that the Wand board is using the configuration files
>> from the nitrogen6x tree.
>
> Yes, I should have said "As it stands today only mx6qsabresd and
> congatec share t
On Mon, Sep 1, 2014 at 8:34 PM, Eric Nelson
wrote:
> I believe that the Wand board is using the configuration files
> from the nitrogen6x tree.
Yes, I should have said "As it stands today only mx6qsabresd and
congatec share the same mx6q_4x_mt41j128.cfg script."
Regards,
Fabio Estevam
Hi Fabio,
On 09/01/2014 03:27 PM, Fabio Estevam wrote:
> Hi Wolfgang,
>
> On Mon, Sep 1, 2014 at 4:24 PM, Wolfgang Denk wrote:
>> Dear Nitin Garg,
>>
>> In message <1409581243-12695-1-git-send-email-nitin.g...@freescale.com> you
>> wrote:
>>> Move board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg to
Hi Wolfgang,
On Mon, Sep 1, 2014 at 4:24 PM, Wolfgang Denk wrote:
> Dear Nitin Garg,
>
> In message <1409581243-12695-1-git-send-email-nitin.g...@freescale.com> you
> wrote:
>> Move board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg to
>> board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg as this is
>> w
Dear Nitin Garg,
In message <1409581243-12695-1-git-send-email-nitin.g...@freescale.com> you
wrote:
> Move board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg to
> board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg as this is
> was designed for the mx6sabresd board. This also updates the
> cgtqmx6qeval whi
Dear Otavio,
In message
you wrote:
>
> I disagree (but this is my personal view on this). The reason why I
> disagree is because the DDR calibration is very design dependant so
> if/when Freescale optimize their DDR data setting they may break any
> other board using it however they shouldn't b
Wolfgang,
On Mon, Sep 1, 2014 at 4:02 PM, Wolfgang Denk wrote:
> In message
> you
> wrote:
>>
>> > But in the next sentence you state that this very file is also used by
>> > another board (cgtqmx6qeval) - so apparently it is NOT a board
>> > specific file. Actually this makes even more sense
Hi
Il 01/set/2014 21:02 "Wolfgang Denk" ha scritto:
>
> Dear Otavio,
>
> In message you wrote:
> >
> > > But in the next sentence you state that this very file is also used by
> > > another board (cgtqmx6qeval) - so apparently it is NOT a board
> > > specific file. Actually this makes even more
Dear Otavio,
In message
you wrote:
>
> > But in the next sentence you state that this very file is also used by
> > another board (cgtqmx6qeval) - so apparently it is NOT a board
> > specific file. Actually this makes even more sense to me, as I would
> > expect that the file is more specific
Wolfgang,
(Dropping Leo e-mail as it bounces, adding Alex who seem to be working
on BSP support at Congatec now)
On Mon, Sep 1, 2014 at 2:59 PM, Wolfgang Denk wrote:
> In message <1409581243-12695-1-git-send-email-nitin.g...@freescale.com> you
> wrote:
>> Move board/freescale/imx/ddr/mx6q_4x_mt
Dear Nitin Garg,
In message <1409581243-12695-1-git-send-email-nitin.g...@freescale.com> you
wrote:
> Move board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg to
> board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg as this is
> was designed for the mx6sabresd board. This also updates the
> cgtqmx6qeval whi
On Mon, Sep 1, 2014 at 11:24 AM, Fabio Estevam wrote:
> On Mon, Sep 1, 2014 at 11:20 AM, Nitin Garg wrote:
>> Move board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg to
>> board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg as this is
>> was designed for the mx6sabresd board. This also updates the
>> cgtqm
On Mon, Sep 1, 2014 at 11:20 AM, Nitin Garg wrote:
> Move board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg to
> board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg as this is
> was designed for the mx6sabresd board. This also updates the
> cgtqmx6qeval which makes use of this configuration.
>
> Signed-off
Move board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg to
board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg as this is
was designed for the mx6sabresd board. This also updates the
cgtqmx6qeval which makes use of this configuration.
Signed-off-by: Nitin Garg
---
.../{imx/ddr => mx6sabresd}/mx6q_4x_mt41
15 matches
Mail list logo