Hi
I'm using git-pw to apply patches, and I got fail with one 'git-pw
series apply' command,
I use 'git am --abort' to skip that failed patch, but after that, no
matter I use 'git am' or 'git-pw'
command to apply other patches, the git will always apply the failed
patch set first.
Ho
On 2019/10/8 上午8:31, Kever Yang wrote:
> Hi Qu and Mani,
>
>
> This patch has already on the mater, you can try with master code and
> use idbloader.img
>
> directly.
>
>
> Thanks,
Confirmed it works perfectly on RockPi 4, while the previous tag
v2019.04, it boots but could easily hit SErro
Hi,
I'm using initramfs (gzipped cpio) to boot my board (RockPi4).
The problem is, if initramfs is loaded other than old initrd, booti
command will just fail with "Wrong Ramdisk Image Format".
I'm currently working it around by not using initramfs/initrd, and
compile the fs module into the kerne
Provide optimized memcpy_{from,to}io() and memset_io(). This is required
when moving large amount of data to and from IO regions such as IP
registers or accessing memory mapped flashes.
Code is borrowed from Linux Kernel v5.4.
Signed-off-by: Vignesh Raghavendra
---
arch/arm/include/asm/io.h | 1
On 2019/10/12 下午6:52, Qu Wenruo wrote:
> Hi,
>
> I'm using initramfs (gzipped cpio) to boot my board (RockPi4).
>
> The problem is, if initramfs is loaded other than old initrd, booti
> command will just fail with "Wrong Ramdisk Image Format".
Well, it looks like Uboot is using wrapped image c
On 10/11/19 9:41 AM, AKASHI Takahiro wrote:
Adding kmemdup() will help improve portability from linux kernel
code (in my case, lib/crypto/x509_cert_parser.c and pkcs7_parser.c).
Signed-off-by: AKASHI Takahiro
---
include/linux/compat.h | 4 ++--
lib/linux_compat.c | 11 +++
2 f
On 10/10/19 3:09 PM, Igor Opaniuk wrote:
> From: Igor Opaniuk
>
> This fixes the issues with calculation of controller indexes in
> ehci_usb_bind() for iMX7, as USB controllers on iMX7 SoCs aren't
> placed next to each other, and their addresses incremented by 0x1.
>
> Example of USB nodes f
On 10/11/19 9:41 AM, AKASHI Takahiro wrote:
Adding time64_t definition will help improve portability of linux kernel
code (in my case, lib/crypto/x509_cert_parser.c).
Signed-off-by: AKASHI Takahiro
---
include/linux/time.h | 24
1 file changed, 24 insertions(+)
diff
On 10/11/19 9:41 AM, AKASHI Takahiro wrote:
Adding "printk.h" will help improve portability from linux kernel
code (in my case, lib/asn1_decoder.c).
Signed-off-by: AKASHI Takahiro
---
include/linux/kernel.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/linux/kernel.h b/includ
On 10/11/19 9:41 AM, AKASHI Takahiro wrote:
Imported from linux kernel v5.3.
This host command will be used to create a ASN1 parser, for example,
for pkcs7 or x509.
Signed-off-by: AKASHI Takahiro
---
cmd/Kconfig |3 +
include/linux/asn1.h | 65 ++
i
On 10/11/19 9:41 AM, AKASHI Takahiro wrote:
Imported from linux kernel v5.3.
Signed-off-by: AKASHI Takahiro
---
lib/Kconfig| 6 +
lib/Makefile | 1 +
lib/asn1_decoder.c | 527 +
Except for adjustments of include files lib/asn1_d
On 10/11/19 9:41 AM, AKASHI Takahiro wrote:
This rule will be used to build x509 and pkcs7 parsers.
Signed-off-by: AKASHI Takahiro
The ASN1 compiler is generating both *.asn.h and *.asn.c files.
Then I would expect that these files are deleted by `make mrproper'.
Please, adjust the clean: t
On 10/10/19 3:04 AM, AKASHI Takahiro wrote:
On Wed, Oct 09, 2019 at 07:56:04PM +0200, Heinrich Schuchardt wrote:
On 10/9/19 7:30 AM, AKASHI Takahiro wrote:
This function, and hence rsa_verify(), will perform RSA verification
with two essential parameters for a RSA public key in contract of
rsa_
On 10/11/19 9:41 AM, AKASHI Takahiro wrote:
Imported from linux kernel v5.3.
Please, indicate in the commit message which files are verbatim copies
and which files had to be adjusted. E.g. in lib/oid_registry.c you
adjusted the includes.
Signed-off-by: AKASHI Takahiro
---
include/linux/oi
On 10/11/19 9:55 AM, AKASHI Takahiro wrote:
I hope this patch set will be reviewed promptly as I'm aiming to
push my "UEFI secure boot" patch for v2020.01.
How can I make all of these new files being built to check for build
warnings?
Please, provide unit tests for the patch series.
Please,
On 10/11/19 9:42 AM, AKASHI Takahiro wrote:
Imported from linux kernel v5.3.
It is unclear from your commit message which files are verbatime copies
and which have been adjusted to fit into U-Boot.
Where is the unit test?
Best regards
Heinrich
Signed-off-by: AKASHI Takahiro
---
include/
On Fri, 2019-10-04 at 15:30 -0700, Dalon Westergreen wrote:
> From: Dalon Westergreen
>
> Add a script to process hps handoff data and generate a header
> for inclusion in u-boot specific devicetree addons. The header
> should be included in the top level u-boot.dtsi.
>
> Signed-off-by: Dalon W
On 10/3/19 8:01 PM, Heinrich Schuchardt wrote:
On 10/3/19 7:09 PM, Tom Rini wrote:
On Thu, Oct 03, 2019 at 07:01:22PM +0200, Heinrich Schuchardt wrote:
struct ip_udp_hdr is naturally packed. There is no point in adding a
__packed attribute. With the attribute the network stack does not
compile
Hi,
2019-10 is now released so i want to remember on this series. Just to be inside
merge window...
Regards Frank
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Bin,
On Fri, 11 Oct 2019 at 22:48, Bin Meng wrote:
>
> Hi Simon,
>
> On Sat, Oct 12, 2019 at 11:38 AM Simon Glass wrote:
> >
> > Hi Bin,
> >
> > On Thu, 10 Oct 2019 at 03:50, Bin Meng wrote:
> > >
> > > Hi Simon,
> > >
> > > On Wed, Sep 25, 2019 at 10:59 PM Simon Glass wrote:
> > > >
> > >
Hi Bin,
On Fri, 11 Oct 2019 at 23:18, Bin Meng wrote:
>
> Hi Simon,
>
> On Sat, Oct 12, 2019 at 11:38 AM Simon Glass wrote:
> >
> > Hi Bin,
> >
> > On Fri, 11 Oct 2019 at 07:19, Bin Meng wrote:
> > >
> > > Hi Simon,
> > >
> > > On Fri, Oct 11, 2019 at 1:06 AM Simon Glass wrote:
> > > >
> > > >
Hi Peter,
On Wed, 9 Oct 2019 at 16:50, Peter Robinson wrote:
>
> The SPL is now running at SDRAM, and 0x1 is used by BL31,
> and the ARM SPL do not support relocate now, we need reserved
> 0x5 so that it won't overwrite the code when we load the
> bl31 to target space.
> We should remove
On 10/7/19 7:59 AM, AKASHI Takahiro wrote:
Currently, a whole disk without any partitions is not associated
with EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. So even if it houses some
file system, there is a chance that we may not be able to access
it, particularly, when accesses are to be attempted after se
Hi,
I tried to find more information about configure u-boot for booting
multiple UBI volumes on imx6, but seems to me that information is
really sparse.
There was a proposal by Wolfgang Denk many years ago at
https://elinux.org/Boot_U-Boot_from_UBI_volume, and I could not find
anyone talked about
On Fri, Oct 11, 2019 at 10:49:59PM +0800, Bin Meng wrote:
> Hi Tom,
>
> This PR includes the following changes:
>
> - Remember the device being emulated for Sandbox PCI
> - Update Kconfig options for FSP 1.0
> - Drop RESET_BASE and RESET_SEG_SIZE that are no longer used
>
> The following change
On Wed, Aug 14, 2019 at 03:18:33PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> wait_for_bit_le32 and wait_for_bit_le16 use the raw I/O functions
> which would default to big-endian on BE systems. Create the generic
> equivalents to use the native endianness.
>
> Signed-off-by: Kursad
On Wed, Aug 14, 2019 at 03:18:35PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> The Broadcom ARM implementations do not yet have a clock framework so
> one can use a fixed clock as the root clock of the hsspi block. The
> fixed clock does not have an "enable" routine, since it's always
On Wed, Aug 14, 2019 at 03:18:34PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> Make the driver compatible with both big and little endian SOCs.
> Replace big-endian calls with their raw equivalents, expect for
> writing the command to FIFO. That still has to be in big-endian
> format.
On Wed, Aug 14, 2019 at 03:18:32PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> This IP exists in both MIPS and ARM cores, so we also
> allow to use this driver on bcm6858 and bcm63158.
>
> Signed-off-by: Kursad Oney
> Reviewed-by: Philippe Reynes
> Reviewed-by: Daniel Schwierzeck
On Tue, Sep 03, 2019 at 04:17:17PM +0200, Lukasz Majewski wrote:
> From: Mans Rullgard
>
> This fixes a wrongly indented block of code.
>
> Signed-off-by: Mans Rullgard
> [lukma: Make the commit message more verbose]
> Signed-off-by: Lukasz Majewski
Applied to u-boot/master, thanks!
--
Tom
On Wed, Aug 14, 2019 at 03:18:40PM +0200, Philippe Reynes wrote:
> This commit add a spi-nor device in the bcm96850xref device tree.
>
> Signed-off-by: Philippe Reynes
> Reviewed-by: Kursad Oney
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
_
On Thu, Aug 22, 2019 at 12:26:56PM +0200, Frank Wunderlich wrote:
> From: Oleksandr Rybalko
>
> In 32bits mode upper bits need to be set to 0, otherwise controller will
> try to DMA into not existing memory and stops with error.
>
> Tested-by: Frank Wunderlich
> Signed-off-by: Frank Wunderlich
On Wed, Aug 14, 2019 at 03:18:37PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> This change adds a spi nor flash device to the bcm963158 board.
>
> Signed-off-by: Kursad Oney
> Reviewed-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP s
On Wed, Sep 04, 2019 at 04:01:44PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> Add support to boot the MCU domain R5F Core0 remoteproc at U-boot prompt
> on the AM65x EVM boards by using the 'boot_rprocs' and other env variables
> defined in the common environment file k3_rproc.h, and upda
On Wed, Aug 14, 2019 at 03:18:41PM +0200, Philippe Reynes wrote:
> This commit enable the support of the spi-nor for the
> broadcom reference board bcm968580xref.
>
> Signed-off-by: Philippe Reynes
> Reviewed-by: Kursad Oney
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Descriptio
On Wed, Aug 14, 2019 at 03:18:36PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> This change adds the hsspi controller to the 63158 dtsi.
>
> Signed-off-by: Kursad Oney
> Reviewed-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signatur
On Fri, Sep 27, 2019 at 01:32:13PM +0530, Lokesh Vutla wrote:
> Enable CONFIG_DISPLAY_CPUINFO so that cpuinfo is printed during boot.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
On Wed, Sep 04, 2019 at 04:01:32PM +0530, Lokesh Vutla wrote:
> Power domain for the remote cores needs to be handled in a right
> sequence as mandated by the spec. Introduce tisci helper apis
> that can control power-domains of remote cores. TISCI clients
> can use this api and control the remote
On Thu, Aug 15, 2019 at 03:55:26PM -0500, Andreas Dannenberg wrote:
> During FIT reading through ymodem_read_fit() the function
> xyzModem_stream_read() is being used which returns zero once the end
> of a stream has been reached. This could lead to an premature exit from
> ymodem_read_fit() with
On Wed, Sep 04, 2019 at 04:01:45PM +0530, Lokesh Vutla wrote:
> Enable R5F and DSP remoteproc drivers for j721e running on a72.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U
On Tue, Sep 10, 2019 at 08:51:53AM +, Rasmus Villemoes wrote:
> No ARM board seems to define __mem_pci - and if it did, one would get tons of
>
> ./arch/arm/include/asm/io.h:307:0: warning: "readl" redefined
>
> warnings, because readl and friends are unconditionally defined
> earlier in i
On Mon, Sep 09, 2019 at 12:06:46PM +0200, Lukasz Majewski wrote:
> This define indicates if DM_SPI shall be supported in SPL. This allows
> proper operation of DM converted SPI drivers in SPL, which use
> #if !CONFIG_IS_ENABLED(DM_SPI) to also support not yet DM/DTS converted
> boards.
>
> Signed
On Thu, Aug 22, 2019 at 12:26:51PM +0200, Frank Wunderlich wrote:
> From: Ryder Lee
>
> This adds PCIe and its PHY nodes for MT7623.
>
> Tested-by: Frank Wunderlich
> Signed-off-by: Ryder Lee
> Signed-off-by: Frank Wunderlich
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Descri
On Tue, Sep 10, 2019 at 08:51:54AM +, Rasmus Villemoes wrote:
> readb is unconditionally defined earlier in io.h, so there's no point
> checking whether it's undefined.
>
> Signed-off-by: Rasmus Villemoes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Wed, Sep 04, 2019 at 04:01:48PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> The A53 U-boot can support early booting of the MCU R5F remote processor(s)
> from U-boot prompt to achieve various system usecases before booting the
> Linux kernel. Update the default BOOTCOMMAND to provide an
On Thu, Aug 22, 2019 at 12:26:50PM +0200, Frank Wunderlich wrote:
> From: Ryder Lee
>
> The driver provides PHY for USB2, USB3.0, PCIe and SATA, and now
> we just enable PCIe. As for the other functionalities will be
> added gradually in upcoming days.
>
> This is adapted from the Linux version
On Wed, Aug 14, 2019 at 03:18:38PM +0200, Philippe Reynes wrote:
> From: Kursad Oney
>
> This commit enable the support of the spi-nor for the
> broadcom reference board bcm963158.
>
> Signed-off-by: Kursad Oney
> Reviewed-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
sign
On Wed, Sep 25, 2019 at 02:38:13PM +0530, Lokesh Vutla wrote:
> J721E uses TISCI protocol to reset the device and does not
> support PSCI reset. So disable PSCI reset.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
_
On Thu, Aug 15, 2019 at 03:55:27PM -0500, Andreas Dannenberg wrote:
> Expose SPL's Y-Modem core loader function via the common SPL header
> file so it can be re-used for purposes other than loading U-Boot itself.
>
> Signed-off-by: Andreas Dannenberg
Applied to u-boot/master, thanks!
--
Tom
On Thu, Aug 15, 2019 at 03:55:32PM -0500, Andreas Dannenberg wrote:
> am65x ROM support booting over UART. And U-Boot built for am65x EVM
> supports UART boot as well. Add the UART boot procedure into the README
> also providing a corresponding example command sequence for execution
> on a host PC
On Tue, Sep 03, 2019 at 04:16:50PM +0200, Lukasz Majewski wrote:
> From: Mans Rullgard
>
> This change allows setting pre-defined eMMC boot partition for SPL eMMC
> booting. It is necessary in the case when one wants to boot (through falcon
> boot) from eMMC after loading SPL from other memory (
On Wed, Sep 04, 2019 at 04:01:35PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> Some Texas Instruments K3 family of SoCs have one of more Digital Signal
> Processor (DSP) subsystems that are comprised of either a TMS320C66x
> CorePac and/or a next-generation TMS320C71x CorePac processor sub
On Mon, Aug 26, 2019 at 01:50:31PM +0200, Patrice Chotard wrote:
> Regulator should not be enabled at probe time if regulator-boot-on
> property is not in the dt node.
>
> "enable-active-high" property is only used to indicate the GPIO
> polarity.
>
> See kernel documentation :
> - Documentatio
On Wed, Aug 14, 2019 at 03:18:39PM +0200, Philippe Reynes wrote:
> This commit add a hsspi controller in the bcm6858 device tree.
>
> Signed-off-by: Philippe Reynes
> Reviewed-by: Kursad Oney
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Wed, Sep 11, 2019 at 03:39:53PM +0200, Michal Simek wrote:
> From: T Karthik Reddy
>
> This patch uses auto instead of decimal in simple_strtoul().
>
> Signed-off-by: T Karthik Reddy
> Signed-off-by: Michal Simek
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP
On Thu, Aug 22, 2019 at 12:26:49PM +0200, Frank Wunderlich wrote:
> From: Ryder Lee
>
> This adds PCIe controller support for MT7623.
> This is adapted from the Linux version.
>
> Tested-by: Frank Wunderlich
> Signed-off-by: Ryder Lee
> Signed-off-by: Frank Wunderlich
Applied to u-boot/mast
On Mon, Sep 16, 2019 at 01:47:15PM +0530, Lokesh Vutla wrote:
> ecc_address_range registers contains the start address and end address
> of the DDR address space. But the ddr driver is assuming the register
> contains the start address and size of the DDR address space. Because
> of this the ecc e
On Wed, Sep 04, 2019 at 04:01:34PM +0530, Lokesh Vutla wrote:
> SoCs with K3 architecture have an integrated Arm Cortex-R5F subsystem
> that is comprised of dual-core Arm Cortex-R5F processor cores. This R5
> subsytem can be configured at boot time to be either run in a LockStep
> mode or in an As
On Thu, Aug 22, 2019 at 12:26:55PM +0200, Frank Wunderlich wrote:
> From: Oleksandr Rybalko
>
> Tested-by: Frank Wunderlich
> Signed-off-by: Frank Wunderlich
> Signed-off-by: Oleksandr Rybalko
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
_
On Fri, Sep 27, 2019 at 07:14:28PM +0300, Tero Kristo wrote:
> AM43xx-IDK boards contain the CDCE913 clock synthesizer, and their
> reset crystal capacitance load value of 10pF is wrong leading into
> lost packets in certain networking tests. Add DT data for this
> device, and probe it from the bo
On Fri, Sep 27, 2019 at 01:32:14PM +0530, Lokesh Vutla wrote:
> Enable CONFIG_DISPLAY_CPUINFO so that cpuinfo is printed during boot.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
On Thu, Aug 22, 2019 at 12:26:54PM +0200, Frank Wunderlich wrote:
> From: Ryder Lee
>
> This adds a document for tphy which supports physical layer
> functionality for a number of controllers on MediaTek SoCs,
> such as, USB2.0, USB3.0, PCIe, and SATA.
>
> Signed-off-by: Ryder Lee
> Signed-off
On Wed, Sep 25, 2019 at 02:38:05PM +0530, Lokesh Vutla wrote:
> AM65x uses TISCI protocol to reset the device and does not
> support PSCI reset. So disable PSCI reset.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
_
On Wed, Sep 04, 2019 at 04:01:39PM +0530, Lokesh Vutla wrote:
> The J721E SoCs have two TMS320C66x DSP Core Subsystems (C66x CorePacs)
> in the MAIN voltage domain, each with a C66x Fixed/Floating-Point DSP
> Core, and 32 KB of L1P & L1D configurable SRAMs/Cache and an additional
> 288 KB of L2 co
On Fri, Sep 27, 2019 at 07:14:26PM +0300, Tero Kristo wrote:
> Add support for CDCE913/925/937/949 family of devices. These are modular
> PLL-based low cost, high performance, programmable clock synthesizers,
> multipliers and dividers. They generate up to 9 output clocks from a
> single input fre
On Fri, Sep 27, 2019 at 07:14:29PM +0300, Tero Kristo wrote:
> AM335x-ICE boards contain the CDCE913 clock synthesizer, and their
> reset crystal capacitance load value of 10pF is wrong leading into
> lost packets in certain networking tests. Add DT data for this
> device, and probe it from the bo
On Wed, Sep 04, 2019 at 04:01:49PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> The A53 U-Boot code can load and boot the MCU domain R5F cores (either a
> single core in LockStep mode or 2 cores in Split mode) to achieve various
> early system functionalities. Change the memory attributes f
On Wed, Sep 04, 2019 at 04:01:43PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> Add support to boot some remoteprocs at U-boot prompt on the J721E EVM
> boards by using the 'boot_rprocs' and other env variables defined in the
> common environment file k3_rproc.h, and updating the 'DEFAULT_R
On Fri, Sep 27, 2019 at 07:14:27PM +0300, Tero Kristo wrote:
> AM57xx-IDK boards contain the CDCE913 clock synthesizer, and their
> reset crystal capacitance load value of 10pF is wrong leading into
> lost packets in certain networking tests. Add DT data for this
> device, and probe it from the bo
On Wed, Sep 04, 2019 at 04:01:31PM +0530, Lokesh Vutla wrote:
> Introduce rproc_elf_get_boot_addr() that returns the entry point of
> the elf file. This api auto detects the 64/32 bit elf file and returns
> the boot addr accordingly.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, tha
On Thu, Aug 22, 2019 at 12:26:53PM +0200, Frank Wunderlich wrote:
> From: Ryder Lee
>
> This adds a document for MT7623 PCIe controller.
>
> Signed-off-by: Ryder Lee
> Signed-off-by: Frank Wunderlich
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
__
On Wed, Sep 04, 2019 at 04:01:47PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> Enable the R5F remoteproc driver for the AM65x GP EVM so that the
> MCU domain R5F cores can be booted from A53 U-boot.
>
> Signed-off-by: Suman Anna
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, t
On Wed, Sep 04, 2019 at 04:01:42PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> Add a new file include/environment/ti/k3_rproc.h that defines
> common environment variables useful for booting various remote
> processors from U-Boot. This file is expected to be included in
> the board config
On Tue, Sep 24, 2019 at 01:17:16PM +0530, Lokesh Vutla wrote:
> Power-domain is enabled by default in device_probe. am654 mmc driver
> is enabling power-domain again in probe. As the second call is
> redundant, drop power_domain_on from probe.
>
> Tested-by: Suman Anna
> Signed-off-by: Lokesh Vu
On Thu, Aug 22, 2019 at 12:26:52PM +0200, Frank Wunderlich wrote:
> From: Ryder Lee
>
> This follows the linux header rules to avoid conflict bitfields.
>
> Tested-by: Frank Wunderlich
> Signed-off-by: Ryder Lee
> Signed-off-by: Frank Wunderlich
Applied to u-boot/master, thanks!
--
Tom
On Fri, Sep 27, 2019 at 01:32:11PM +0530, Lokesh Vutla wrote:
> Add support for printing CPU info for all K3 devices.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot mail
On Wed, Sep 04, 2019 at 04:01:41PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> The AM65x SoCs has a single dual-core Arm Cortex-R5F processor
> subsystem/cluster (MCU_R5FSS0) within the MCU domain. This cluster
> can be configured at boot time to be either run in a LockStep mode
> or in an
On Wed, Sep 04, 2019 at 04:01:29PM +0530, Lokesh Vutla wrote:
> The current rproc-elf-loader supports loading of only 32 bit elf files.
> Introduce support for loading of 64 bit elf files in rproc-elf-loader.
>
> Signed-off-by: Lokesh Vutla
> Reviewed-by: Fabien Dessenne
Applied to u-boot/mast
On Wed, Sep 04, 2019 at 04:01:46PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> The A72 U-boot can support early booting of any of the R5F or C66x
> or C71x remote processors from U-boot prompt to achieve various system
> usecases before booting the Linux kernel. Update the default BOOTCOMM
On Thu, Aug 15, 2019 at 03:55:29PM -0500, Andreas Dannenberg wrote:
> In order to allow booting TI K3 family SoCs via Y-Modem add support for
> loading System Firmware by tapping into the associated SPL core loader
> function.
>
> In this context also make sure a console is available and if not g
On Wed, Sep 04, 2019 at 04:01:26PM +0530, Lokesh Vutla wrote:
> Add a function to count the available children of a device.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boo
On Thu, Aug 15, 2019 at 03:55:31PM -0500, Andreas Dannenberg wrote:
> Activate early console functionality on AM654x devices to allow for an
> alternate serial port to be used to support UART-based boot. This is so
> that System Firmware (SYSFW) can get loaded over the serial port prior
> to the m
On Thu, Sep 19, 2019 at 04:18:39PM +0200, Philippe Reynes wrote:
> This commit add a generic function board_init_f that
> only initialize some device (for example serial). It
> avoid to define a board function only to launch the
> serial configuration.
>
> Signed-off-by: Philippe Reynes
Applied
On Fri, Sep 27, 2019 at 01:32:15PM +0530, Lokesh Vutla wrote:
> Use the driver name to get ti_sci handle rather than relying
> on just the FIRMWARE uclass.
>
> Signed-off-by: Lokesh Vutla
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
_
On Mon, Sep 30, 2019 at 08:42:21PM +0300, Jarkko Nikula wrote:
> Currently "bootcmd" does not work as intended but instead prints MMC usage
> information and goes directly to "nandboot".
>
> Follow what the commit 669681104daa ("configs: Fix usage of mmc rescan")
> does for other boards prior to
On Tue, Sep 17, 2019 at 03:40:25PM -0400, Andrew F. Davis wrote:
> When running 'run_fit' the FIT file should have been loaded at
> 'addr_fit', although at this point they should be the same
> use this variable instead of 'loadaddr'.
>
> Signed-off-by: Andrew F. Davis
Applied to u-boot/master,
On Thu, Aug 15, 2019 at 03:55:30PM -0500, Andreas Dannenberg wrote:
> Although we currently use the MAIN_UART0 for R5 SPL console output there
> are cases where we require access to the MCU_UART0 as well for example in
> case of UART-based Y-Modem boot. To support these scenarios add related
> DTS
On Wed, Sep 04, 2019 at 04:01:38PM +0530, Lokesh Vutla wrote:
> The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS)
> subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within
> the MCU domain, and the remaining two clusters are present in the
> MAIN domain (MAIN_R5FSS0 & MA
On Thu, Aug 15, 2019 at 03:55:28PM -0500, Andreas Dannenberg wrote:
> Implement an early console functionality in SPL that can be used before
> the main console is being brought up. This helps in situations where the
> main console is dependent on System Firmware (SYSFW) being up and running,
> wh
On Tue, Sep 17, 2019 at 02:25:37PM +,
bollavarapumoses.christop...@in.bosch.com wrote:
> From: Moses Christopher
>
> - add BOARD_LATE_INIT function calls in board.c
> - add swi_status detection in board.c
> - mux: add guardian interfaces to single pinmux structure
> - am33xx, kconfi
On Thu, Sep 12, 2019 at 07:09:26PM +0200, Heinrich Schuchardt wrote:
> If an exception occurs in a loaded image and the relocation offset is
> unknown, it is helpful to know the instructions pointed to by the
> program counter. This patch adds the missing output.
>
> A possible output is:
> C
On Wed, Sep 04, 2019 at 04:01:28PM +0530, Lokesh Vutla wrote:
> rproc_elf32_load_image() rely on user to send a valid address for elf loading.
> Instead do a sanity check on the address passed by user. This will help
> all rproc elf users to not call sanity_check explicitly before calling
> elf_lo
On Mon, Sep 16, 2019 at 01:47:16PM +0530, Lokesh Vutla wrote:
> ecc_address_range registers contains the start address and end address
> of the DDR address space. But the ddr cmd driver is assuming the register
> contains the start address and size of the DDR address space. Because
> of this some
On Wed, Oct 02, 2019 at 12:24:46PM +0200, Marek Szyprowski wrote:
> Add support for quad (64bits) memory access specifier.
>
> Signed-off-by: Marek Szyprowski
> Acked-by: Lukasz Majewski
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
_
On Wed, Sep 04, 2019 at 04:01:36PM +0530, Lokesh Vutla wrote:
> Certain SoCs with K3 architecture have integrated a C66 Corepac DSP
> subsystem and an advanced C71 DSPs. Introduce a remoteproc driver
> that that does take care of loading an elf to any of the specified
> DSPs and start it.
>
> Sig
On Wed, Sep 04, 2019 at 04:01:27PM +0530, Lokesh Vutla wrote:
> Introduce a new parameter "size" that accepts size of the region to
> remoteproc ops callback device_to_virt(). This can enforce more checks
> on the region that device_to_virt() is dealing with.
>
> Signed-off-by: Lokesh Vutla
> Te
On Tue, Sep 17, 2019 at 02:25:38PM +,
bollavarapumoses.christop...@in.bosch.com wrote:
> From: Moses Christopher
>
> - update partition table - remove env partitions
> - dts: add new interfaces (uart2, extra gpio-key)
> remove unneeded entries
> update nand timings for
On Mon, Sep 30, 2019 at 06:24:06PM +0530, Lokesh Vutla wrote:
> spl_dm_init is failing as usb to be probed with the following error:
> "omap_dwc3@483c: ret=-2"
> Enable usb to make spl boot on am43xx devices
>
> Reported-by: Tero Kristo
> Signed-off-by: Lokesh Vutla
Applied to u-boot/maste
On Wed, Sep 04, 2019 at 04:01:33PM +0530, Lokesh Vutla wrote:
> From: Suman Anna
>
> The Texas Instruments K3 family of SoCs have one of more dual-core
> Arm Cortex R5F processor subsystems/clusters (R5FSS). Add the device
> tree bindings document for these R5F subsystem devices. These R5F
> pro
On Wed, Sep 04, 2019 at 04:01:30PM +0530, Lokesh Vutla wrote:
> Introduce a common remoteproc elf loader and checker functions that
> automatically detects the 64 bit elf file or 32 bit elf file and
> loads/checks the sections accordingly.
>
> Signed-off-by: Lokesh Vutla
> Reviewed-by: Fabien De
1 - 100 of 116 matches
Mail list logo