Hello,
I'm using 2022.01 u-boot. Booting from SDcard sometimes shows up this log:
U-Boot SPL 2022.01 (Jan 10 2022 - 18:46:34 +)
Trying to boot from MMC2
Card did not respond to voltage select! : -110
spl: mmc init failed with error: -95
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc b
Hi,
I'm playing with radxa cme and mainline u-boot 2024.01 (present in
scarthgap yocto).
I realized that mmc write fails all the time like:
=> md.l $loadaddr
00c00800: ff7ff7eb fffd fff5 9fff
=> mmc write $loadaddr 1fc0 10
MMC write: dev # 0, block # 8128, count 16 .
Hi Jonas,
On Thu, Jul 11, 2024 at 10:33 AM Jonas Karlman wrote:
> Hi Marek,
>
> On 2024-07-10 21:26, Belisko Marek wrote:
> > Hi,
> >
> > I'm playing with radxa cme and mainline u-boot 2024.01 (present in
> > scarthgap yocto).
> > I realized that mm
Hi,
I'm trying to run 2019.07 u-boot on raspberrypi cm3 module but I got
no feedback on console. When used 2018.01 it boots fine. Probably I
need to do git bisect but maybe someone have some idea or experience
what can cause that. Thanks.
BR,
marek
--
as simple and primitive as possible
--
On Tue, May 5, 2020 at 10:18 PM Belisko Marek wrote:
>
> Hi,
>
> I'm trying to run 2019.07 u-boot on raspberrypi cm3 module but I got
> no feedback on console. When used 2018.01 it boots fine. Probably I
> need to do git bisect but maybe someone have some idea or experienc
On Wed, May 6, 2020 at 11:02 PM Belisko Marek wrote:
>
> On Tue, May 5, 2020 at 10:18 PM Belisko Marek wrote:
> >
> > Hi,
> >
> > I'm trying to run 2019.07 u-boot on raspberrypi cm3 module but I got
> > no feedback on console. When used 2018.01 it boots f
Hi Matthias,
On Fri, May 8, 2020 at 11:28 PM Matthias Brugger wrote:
>
> Hi Marek,
>
> On 08/05/2020 21:52, Belisko Marek wrote:
> > On Wed, May 6, 2020 at 11:02 PM Belisko Marek
> > wrote:
> >>
> >> On Tue, May 5, 2020 at 10:18 PM Belisko Marek
&
On Fri, May 8, 2020 at 11:39 PM Belisko Marek wrote:
>
> Hi Matthias,
>
> On Fri, May 8, 2020 at 11:28 PM Matthias Brugger wrote:
> >
> > Hi Marek,
> >
> > On 08/05/2020 21:52, Belisko Marek wrote:
> > > On Wed, May 6, 2020 at 11:02 PM Belisko Mar
On Tue, May 12, 2020 at 12:51 PM Matthias Brugger wrote:
>
>
>
> On 12/05/2020 11:15, Belisko Marek wrote:
> > On Fri, May 8, 2020 at 11:39 PM Belisko Marek
> > wrote:
> >>
> >> Hi Matthias,
> >>
> >> On Fri, May 8, 2020 at 11:28 PM M
On Tue, May 12, 2020 at 1:16 PM Matthias Brugger wrote:
>
>
>
> On 12/05/2020 13:00, Belisko Marek wrote:
> > On Tue, May 12, 2020 at 12:51 PM Matthias Brugger wrote:
> >>
> >>
> >>
> >> On 12/05/2020 11:15, Belisko Marek wrote:
> >&g
On Tue, May 12, 2020 at 1:51 PM Matthias Brugger wrote:
>
>
>
> On 12/05/2020 13:39, Matthias Brugger wrote:
> >
> >
> > On 12/05/2020 13:36, Belisko Marek wrote:
> >> On Tue, May 12, 2020 at 1:16 PM Matthias Brugger
> >> wrote:
> >>>
Hello,
I'm using u-boot v2020.01 and run on cm4 model it boots fine just
report that model is unknown:
DRAM: 948 MiB
RPI: Board rev 0x14 outside known range
RPI Unknown model (0xa03140)
I checked and in later releases there is added support for cm4 but
what I'm missing is devicetree blob. In ma
Hi,
I'm trying to run mainline on a custom rk3399 board which boots from
eMMC only. Currently I'm using Rockchip SDK which can build an image
for the whole system) and then flash it to emmc using (AFAIU using dfu
in u-boot). Does anyone have experience with mainline running on
rk3399 and have the
Hi,
I'm trying to add support for reading imx8mq boot ROM event log and
got inspired by this patch:
https://lists.denx.de/pipermail/u-boot/2021-July/453318.html
My question is if the condition for checking log pointers is correct:
/* If the ROM event log pointer is not valid. */
if (*ro
Hi,
I'm trying to compile an older u-boot (2017.03) with Ubuntu 20.04.
Machine is sunxi. COmpilation went fine but when binman assembles
u-boot-sunxi-with-spl.bin it stuck somewhere. I've enabled python
traces and it loops in forever:
subprocess.py(1668): if errpipe_data:
cros_subproc
Hi all,
is it possible to start FIT signed kernel from SPL (falcon mode)?
Thanks,
marek
--
as simple and primitive as possible
-
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052
Hi,
I'm playing with fdt booting on beaglebone board. I'm using latest
u-boot git HEAD (2c072c958bb544c72f0e848375803dbd6971f022) + I've
added to am335x_evm confing :
#ifndef CONFIG_SPL_BUILD
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
#endif
I took beaglebone devicetree from kernel. The
Hello,
On Thu, Mar 27, 2014 at 4:28 PM, Simon Glass wrote:
> Hi,
>
> On 26 March 2014 00:10, Belisko Marek wrote:
>>
>> Hi,
>>
>> I'm playing with fdt booting on beaglebone board. I'm using latest
>> u-boot git HEAD (2c072c958bb544c72f0e84
Hi,
On Wed, Apr 15, 2015 at 8:51 PM, Ivan Metla wrote:
> Hi. I make u-boot for olimex a20-som. I configured it with "*_defconfig".
> Which options I must add to defconfig for change BOOTDELAY from 2 to
> 0.(When boot running - it is waiting 2 seconds for press any key. I want
> that it isn't wait
Hi,
just curious. Why some commands entered to u-boot are repeated after
processing by pressing Enter key? Like tftp, print
Thanks for clarification,
marek
--
as simple and primitive as possible
-
Marek Belisko - OPEN-NANDRA
Freelance Develo
Dear Simon Glass,
On Tue, Jun 3, 2014 at 6:42 AM, Simon Glass wrote:
> Hi Belisko,
>
> On 28 April 2014 00:30, Belisko Marek wrote:
>> Hi Simon,
>>
>> On Wed, Apr 16, 2014 at 4:41 PM, Simon Glass wrote:
>>> This series fixes a few problems that have come up
Hi,
we're running 2014.04-rc3 on custom am335x board (same configuration as BBB).
When spl is loading u-boot from nand flash we can see a lot of
messages in console:
nand: bit-flip corrected @oob=0
It is always the same position (seems to be first byte in oob).
Anybody experienced same problem?
I
CC-ing Pekon Gupta which add those changes in commit:
6e562b1106ea6afc78752f50925e87e9dd14f8b4
On Tue, Apr 15, 2014 at 12:47 PM, Belisko Marek wrote:
> Hi,
>
> we're running 2014.04-rc3 on custom am335x board (same configuration as BBB).
> When spl is loading u-boot from nand f
Hi Pekon,
On Wed, Apr 23, 2014 at 8:04 PM, Gupta, Pekon wrote:
> Hello Marek,
>
>>From: Belisko Marek [mailto:marek.beli...@gmail.com]
>>
>>CC-ing Pekon Gupta which add those changes in commit:
>>6e562b1106ea6afc78752f50925e87e9dd14f8b4
>>
>>On Tu
Hi Pekon,
On Thu, Apr 24, 2014 at 1:53 PM, Gupta, Pekon wrote:
> Hi Marek,
>
>>From: Belisko Marek [mailto:marek.beli...@gmail.com]
>>On Wed, Apr 23, 2014 at 8:04 PM, Gupta, Pekon wrote:
>>>>From: Belisko Marek [mailto:marek.beli...@gmail.com]
>>>>
>
Hi Simon,
On Wed, Apr 16, 2014 at 4:41 PM, Simon Glass wrote:
> This series fixes a few problems that have come up since the secure boot
> series was merged:
>
> - A recent commit broken the assumption that u-boot.bin ends at a known
> address (thus making things appended to U-Boot inaccessible f
Hi Vasisli,
On Sun, May 4, 2014 at 12:56 PM, Vasili Galka wrote:
> Hi,
>
> I'm having some very basic problem with building u-boot. Using clean
> v2014.04 checkout, I run config:
>
> make CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm_config
Add to parameters also ARCH=arm
>
> Which pas
ase update your CROSS_COMPILE)
>
> Best,
> Vasili
>
>
>
> On Sun, May 4, 2014 at 2:12 PM, Belisko Marek
> wrote:
>>
>> Hi Vasisli,
>>
>> On Sun, May 4, 2014 at 12:56 PM, Vasili Galka wrote:
>> > Hi,
>> >
>> > I'
Hi Abdullah,
On Tue, May 6, 2014 at 10:55 AM, Abdullah YILDIZ
wrote:
> I'm trying to understand how u-boot loads zImage into RAM.
>
> mkimage is called as
>
> mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008040
> -d arch/arm/boot/zImage /bootImage/uImage
>
> Here, 'a' stands for
Hi Abdullah,
On Tue, May 6, 2014 at 11:54 AM, Abdullah YILDIZ
wrote:
> Hi Belisko,
>
> On Tue, May 6, 2014 at 12:34 PM, Belisko Marek
> wrote:
>> Hi Abdullah,
>>
>> On Tue, May 6, 2014 at 10:55 AM, Abdullah YILDIZ
>> wrote:
>>> I'm try
Hi,
I have custom am33xx board with phy connected to slave2 port. I
copy'n'paste cpsw setup from /board/BuR/common/common.c but I'm using
only slave2 port (RMII mode) so my cpsw_slave_data looks like:
static struct cpsw_slave_data cpsw_slaves[] = {
{
.slave_reg_ofs = 0x308,
w_data.slaves is 2.
This is when you have more slaves and want to have preferred one to be
primary ethernet.
It's not my case also.
P.S.: please don't top post
BR,
marek
>
>
> -- Original --
> From: "Belisko Marek";;
> Date: T
On Mon, May 25, 2015 at 9:30 PM, Belisko Marek wrote:
> Hi,
>
> I have custom am33xx board with phy connected to slave2 port. I
> copy'n'paste cpsw setup from /board/BuR/common/common.c but I'm using
> only slave2 port (RMII mode) so my cpsw_slave_data
Hi Mugunthan,
On Mon, Jun 1, 2015 at 11:10 AM, Mugunthan V N wrote:
> On Tuesday 26 May 2015 01:00 AM, Belisko Marek wrote:
>> Hi,
>>
>> I have custom am33xx board with phy connected to slave2 port. I
>> copy'n'paste cpsw setup from /board/BuR/common/commo
Hi,
I'm using am33x based board with emmc (2 boot partitions, userdata). I
can start u-boot when MLO and u-boot.img are written to user data
partition (raw mode) but I'm unable when stored in boot part 1. I got
fallback to serial boot always, no message on console. I did use
mmc-utils to switch em
Hi,
I have custom board based on am335x which have assembled 43-46TR16512A
RAM (should be 512x16 = 1GB size). Board boots fine with DDR3 config
for BBB (RAM data looks similar) but shows only 512MB of RAM available
(also in linux). IIRC it is necessary to update RAM EMIF table to have
support for
Hello,
I'm trying to use u-boot on CM3 (which contains eMMC) to boot kernel.
I'm using u-boot 2018.05 and it can start fine like:
U-Boot 2018.05 (Jul 10 2018 - 20:32:05 +)
DRAM: 948 MiB
RPI Compute Module 3 (0xa220a0)
MMC: sdhci@7e30: 0
Loading Environment from FAT... unable to select
Hi Jonathan,
On Wed, Jul 11, 2018 at 3:11 AM Jonathan Gray wrote:
>
> On Tue, Jul 10, 2018 at 10:37:19PM +0200, Belisko Marek wrote:
> > Hello,
> >
> > I'm trying to use u-boot on CM3 (which contains eMMC) to boot kernel.
> > I'm using u-boot 2018.0
Hi Peter,
On Wed, Jul 11, 2018 at 10:01 AM Peter Robinson wrote:
>
> On Tue, Jul 10, 2018 at 9:37 PM, Belisko Marek
> wrote:
> > Hello,
> >
> > I'm trying to use u-boot on CM3 (which contains eMMC) to boot kernel.
> > I'm using u-boot 2018.05 and it c
Hi,
I'm trying to build u-boot in docker on osx (installed build-essentials +
gcc-arm) but hit this issue (with verbose make) during config phase. I
tried same on linux and it works fine. Any ideas what can cause this (or
how to debug)?
make ARCH=arm rpi_0_w_defconfig V=1
make -f ./scripts/Makef
Hi,
I'm working on custome am33xx based HW which have no external 32KHz
crystal. Anyway I want to use bootcount feature. I was trying to use
internal PRCM CLK_32KHZ clock as source for RTCSS but still when want
to read RTC registers I get data abort.
I adapted this method :
static void rtc32k_en
Hi Alex,
On Tue, Oct 30, 2018 at 7:12 AM Alex Kiernan wrote:
>
> On Mon, Oct 29, 2018 at 11:36 PM Belisko Marek
> wrote:
> >
> > Hi,
> >
> > I'm working on custome am33xx based HW which have no external 32KHz
> > crystal. Anyway I want to use bootcou
Hi Simon,
On Thu, Jan 28, 2016 at 5:39 PM, Simon Glass wrote:
> We need a way to support more than one board per binary in U-Boot with
> device tree. Various methods have been discussed. The one that seems to make
> the most sense is to adjust SPL so that it can load a FIT which contains
> U-Boo
Hi Jagan,
On Thu, Sep 29, 2016 at 1:23 PM, Jagan Teki wrote:
> On Thu, Aug 4, 2016 at 11:52 AM, Belisko Marek
> wrote:
>> Hi,
>>
>> I'm trying to figure out how it is possible easily update u-boot in
>> nand on custom imx7 board. I can start u-boot using imx
Hi,
I'm trying to figure out how it is possible easily update u-boot in
nand on custom imx7 board. I can start u-boot using imx_usb tool. I
came from ti am33xx world where I simply get u-boot.img from tftp
server and store it to beginning of flash (after SPL offset).
According imx7 datasheet for
Hi Yegor,
On Mon, Feb 13, 2017 at 12:57 PM, Yegor Yefremov wrote:
> My am335x based board doesn't detect USB sticks:
>
> U-Boot 2017.03-rc1 (Feb 13 2017 - 12:46:54 +0100)
>
> CPU : AM335X-GP rev 2.1
> I2C: ready
> DRAM: 256 MiB
> NAND: 256 MiB
> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
> Using
Hi,
I'm using latest u-boot master
(9b416a9f4ca7cf5ac4d5f7143d67edde7f7d7326) running on beaglebone
(white). This board has watchdog enabled by default for 60 secs
timeout but in my case it's not resetting board after that amount of
time. I did check watchdog registers:
U-Boot# md.l 0x44e35000 30
On Thu, Dec 18, 2014 at 9:19 PM, Tom Rini wrote:
> On Thu, Dec 11, 2014 at 11:55:05AM +0100, Belisko Marek wrote:
>
>> Hi,
>>
>> I'm using latest u-boot master
>> (9b416a9f4ca7cf5ac4d5f7143d67edde7f7d7326) running on beaglebone
>> (white). This board ha
Hi,
I became owner or parallella board and it seems they still have custom fork
of u-boot [1] (not up to date). Does anyone work on mainlining this device?
I can give some hand. Thanks.
[1] - https://github.com/parallella/parallella-uboot
BR,
marek
--
as simple and primitive as possible
Hi,
I'm having strange issue that when update cmdline.txt in boot partition
(basically after first boot there is resize of data partition) then I get
this:
U-Boot 2018.07-g981cc831e3 (Mar 26 2019 - 11:14:55 +0100)
DRAM: 448 MiB
RPI Zero W (0x9000c1)
MMC: sdhci@7e30: 0
Loading Environment from
Hi Lee,
On Tue, Sep 17, 2019 at 4:45 PM Lee Annamalai wrote:
>
> Hi
>
> I am using a Raspberry PI compute module (CM 3+), which seems to be running
> U-Boot - U-Boot 2019.04-dirty (Aug 21 2019 - 14:41:54 +)
>
> The CM3+ is communicating on the UART at boot, before the Kernel loads:
>
> U-Boo
Hi,
I'm trying to run mainline u-boot on amlogic a96mini device but before
I try to flash it does anybody have an idea if it will work on
mainline. As I have limited number of devices and I know that after
flashing I can brick the board so would like to ask if anybody have
experience with this dev
Hi Tom,
On Wed, Dec 4, 2019 at 11:26 PM Tom Rini wrote:
>
> On Fri, Nov 29, 2019 at 12:06:33PM +0100, Belisko Marek wrote:
>
> > Hi,
> >
> > I'm trying to run mainline u-boot on amlogic a96mini device but before
> > I try to flash it does anybody have an id
Hello,
I'm trying to find the cause why my imx8mq based board hangs when it
is rebooted by reset button (works fine when init reset by reboot -f
in console).
By adding print messages I was able to track down in following code:
ret = cdn_api_checkalive();
printf("CDN_API_CheckAlive returned ret
Hi,
I'm using 2022.01 on rockpi-e and having an issue that some SDcards cannot
seem to have issue with accessing partitions. I have the same image flashed
on 2 SD cards. One boots fine and other one shows:
## Executing script at 0050
Saving Environment to MMC... Writing to redundant MMC(1)...
Hi,
I'm using tip of actual master and with this small patches:
--- a/configs/rock-pi-e-rk3328_defconfig
+++ b/configs/rock-pi-e-rk3328_defconfig
@@ -73,6 +73,8 @@ CONFIG_FASTBOOT_BUF_ADDR=0x800800
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
Hi Jonas,
On Fri, Jun 9, 2023 at 1:06 AM Jonas Karlman wrote:
> Hi Marek,
>
> On 2023-06-08 15:06, Belisko Marek wrote:
> > Hi,
> >
> > I'm using tip of actual master and with this small patches:
> > --- a/configs/rock-pi-e-rk3328_defconfig
> &
Hi,
I'm trying to access the MCU_BOOTROM_BASE_ADDR register to preserve some
value between SPL and u-boot (regarding DRAM memory size). Such a hack was
used for imx8 and works perfectly fine, while reading MCU_BOOTROM_BASE_ADDR
in SPL leads to the crash. Is there any peripheral which needs to be
e
58 matches
Mail list logo