RE: [OT] Symbol PDT6800 Help
Don't remind me :-) Our first office computer was a 25/30 (a 300 chassis with a 250 cpu board). Great machine, but the same size as todays big domestic freezers and that didn't even include the disk drives ... 116Mb :-) Cheers, Wol -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jefferson, Jim Sent: 18 March 2004 20:08 To: U2 Users Discussion List Subject: RE: [OT] Symbol PDT6800 Help ...or the Prime I-1000's/P400's. Flip switches to set up octal addresses, twist a dial between "fetch" and "store" (?), put your left foot in, put your left foot out... Jim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steven M Wagner Sent: Thursday, March 18, 2004 1:54 PM To: U2 Users Discussion List Subject:RE: [OT] Symbol PDT6800 Help Sorta makes me think of the booting instructions on a MicroData Reality. Steve At 02:53 PM 3/18/04 -0500, you wrote: >Not sure exactly, but I've got some cryptic notes here: >I think it's ++ -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users *** This transmission is intended for the named recipient only. It may contain private and confidential information. If this has come to you in error you must not act on anything disclosed in it, nor must you copy it, modify it, disseminate it in any way, or show it to anyone. Please e-mail the sender to inform us of the transmission error or telephone ECA International immediately and delete the e-mail from your information system. Telephone numbers for ECA International offices are: Sydney +61 (0)2 9911 7799, Hong Kong + 852 2121 2388, London +44 (0)20 7351 5000 and New York +1 212 582 2333. *** -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users
RE: [OT] Symbol PDT6800 Help
...or the Prime I-1000's/P400's. Flip switches to set up octal addresses, twist a dial between "fetch" and "store" (?), put your left foot in, put your left foot out... Jim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steven M Wagner Sent: Thursday, March 18, 2004 1:54 PM To: U2 Users Discussion List Subject: RE: [OT] Symbol PDT6800 Help Sorta makes me think of the booting instructions on a MicroData Reality. Steve At 02:53 PM 3/18/04 -0500, you wrote: >Not sure exactly, but I've got some cryptic notes here: >I think it's ++ -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users
RE: [OT] Symbol PDT6800 Help
Sorta makes me think of the booting instructions on a MicroData Reality. Steve At 02:53 PM 3/18/04 -0500, you wrote: Not sure exactly, but I've got some cryptic notes here: I think it's ++ This will take you through some questions like "Software Update", etc. You'll have to answer these as you think appropriate for your needs. If that doesn't work, I know that will bring you to a dos prompt (depending on where you are when you do it). I don't know if it works from all areas of the unit's programming. You can also force a reboot by holding down <4>+<5> press wait 3 secs press again, then release <4>+<5>. I don't have a manual in front of me, so I can't double check at this point, but I think that the manuals are available on Symbol's website. Hope this helps. - Dave -Original Message- Does anyone know how to get back to the main configuration menu on a Symbol PDT6800? I'm stuck at: 'Terminal cannot associate with AP. You're out of range or not configured.' -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users -- Steven M Wagner [EMAIL PROTECTED] Cary, North Carolina, United States of America -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users
RE: [OT] Symbol PDT6800 Help
Not sure exactly, but I've got some cryptic notes here: I think it's ++ This will take you through some questions like "Software Update", etc. You'll have to answer these as you think appropriate for your needs. If that doesn't work, I know that will bring you to a dos prompt (depending on where you are when you do it). I don't know if it works from all areas of the unit's programming. You can also force a reboot by holding down <4>+<5> press wait 3 secs press again, then release <4>+<5>. I don't have a manual in front of me, so I can't double check at this point, but I think that the manuals are available on Symbol's website. Hope this helps. - Dave -Original Message- Does anyone know how to get back to the main configuration menu on a Symbol PDT6800? I'm stuck at: 'Terminal cannot associate with AP. You're out of range or not configured.' -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users
Re: [OT] Symbol PDT6800 Help
Don't have those but perhaps the manual from symbol would be of help... ftp://symstore.longisland.com/Symstore/techpubs/manuals/mobile/pdf/3264502a..pdf Check out p. 3-4 1. Boot the terminal to command mode. For the 35-Key terminal: " Press and hold and . " Press and release PWR. " Release and . For the 46-Key terminal: " Press and hold and . " Press and release . " Release and . The terminal displays: COMMAND MODE Select function Self test Could that be what you're looking for? Hope it helps. rfp >>> [EMAIL PROTECTED] 03/18/04 06:35AM >>> Does anyone know how to get back to the main configuration menu on a Symbol PDT6800? I'm stuck at: 'Terminal cannot associate with AP. You're out of range or not configured.' -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users