2017 11:02:23 PM
Subject: Re: [Ubnt_users] AF 11x
Now that is exciting.
From: Jeremy Smith
Sent: Wednesday, September 13, 2017 5:01 PM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] AF 11x
Jirious also has a 1' dish now for the AF11X JRMC-380
From: "Adai
Jirious also has a 1' dish now for the AF11X JRMC-380
From: "Adair Winter"
To: "Ubiquiti Users Group"
Sent: Wednesday, September 13, 2017 4:50:27 PM
Subject: Re: [Ubnt_users] AF 11x
2' to 4' with jirous.
2' to 6' with radio waves.
The
http://www.orcasonline.com
http://www.sanjuanweb.com
The information source for the San Juan Islands
Plans for the next day - "Work, work from early to late. In fact
I have so much to do that I shall spend the first three hours in prayer."
- Martin Luther
> On Sep 1, 2017, a
, as we only use them for
CPEs. We ended up moving all of our APs off of those edge bands after getting a
large batch of CPEs that couldn't 'see' the APs.
From: "Jeremy Smith" <jsm...@bluespring.me>
To: "Ubiquiti Users Group" <ubnt_users@wispa.org>
Sent: Wedn
In my experience with UBNT gear, if you are using a DFS channel and you have
not set a channel list, it will jump to a random channel upon detection. This
can cause a lot of issues with colocated equipment. I have also found that when
you are setting three DFS channels in your list; if it jumps
Someone on the forums stated that it doesn't require a TFTP. They said you can
load 6.0.6 beta to the radio, and then it can be downgraded remotely. Worth a
try...
From: "Mitch"
To: "James Craig" , "Ubiquiti Users Group"
I said in the first post, I did have them setup on the bench and was passing
the advertised 1.2g through the link (with a big smile on my bosses face.)
On Jul 7, 2017 6:25 PM, "Jeremy Smith" < [ mailto:jsm...@bluespring.me |
jsm...@bluespring.me ] > wrote:
Just read it again
Just read it again, and now I see where I was confused. That seems correct. As
long as the TX and RX are set correctly, per your license they should work. Did
you link them on the bench first? The will link around -55/-58 if you place the
N-connectors around 1" apart from each other.
From:
Your duplexers seem incorrect form this post. It should be 2-4, 4-2 and 4-2,2-4
or 1-3, 3-1 and 3-1,1-3 for the TX and RX to work correctly
From: "Ethan E. Dee"
To: "Ubiquiti Users Group"
Sent: Friday, July 7, 2017 2:33:29 PM
Subject: Re:
They definitely act this way with Interference as well. Seen it multiple times
on multiple links.
From: "Josh Luthman"
To: "Ubiquiti Users Group"
Sent: Wednesday, June 14, 2017 11:10:44 AM
Subject: [Ubnt_users] Af5x chain problems
Any
We used Jirious for the first two and Radio waves for the most recent. Radio
Waves did not include jumpers, just a mount for the radio. So can we purchase
the UBNT jumpers?
From: "Mathew Howard"
To: "Ubiquiti Users Group"
Sent: Wednesday, May 10,
Gen2 hardware has a higher receive sensitivity, better shielding, and a
built-in 2.4GHz wifi AP for configuration. No GPS sync yet.
From: "infinite"
To: "Ubiquiti Users Group"
Sent: Thursday, March 23, 2017 9:51:04 AM
Subject: Re:
I use the Panduit connectors. They have a spring-loaded clip, and high quality
offset gold crimps. We stopped having issues when I switched to these. They
aren't cheap, and this is the cheapest place online to buy them that I have
found.
Our labels usually show up within a week.
From: "Don Spaulding"
To: "Ubiquiti Users Group"
Sent: Tuesday, February 28, 2017 5:18:37 PM
Subject: [Ubnt_users] FCC Label turnaround time?
Does anyone on the list know how long it typically takes UBNT to
I have a bunch of NIB 2.4GHz M series Locos I'd sell.
From: "Troy Gibson, Byhalia.net"
To: "Ubiquiti Users Group"
Sent: Monday, November 14, 2016 7:51:31 PM
Subject: Re: [Ubnt_users] Wanted to Buy...
I have one M900 sector, lots of M2 Rocket Dishes
15 matches
Mail list logo