Re: [Ubnt_users] Old Rockets, weird problems
This is why friends don't let friends use Compliance Test :) On 12/7/14, 11:24 PM, Mike Hammett wrote: That's what I started working on when I noticed it was in compliance test, but I can't have the link die because the Rocket fails to connect because it only thinks 5.8 is available when it is allowed DFS and 5150. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com *From: *Josh Luthman j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org *Sent: *Sunday, December 7, 2014 9:56:11 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Get out of compliance test? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 9:45 PM, Mike Hammett wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net wrote: I can't set a DFS channel as there aren't any available. This is a link that I probably setup 4 years ago and forgot about save for some airControl upgrades over time. I probably went through all radios entering the DFS code when I got them in the mail. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com *From: *Matt Hoppes mhop...@indigowireless.com mailto:mhop...@indigowireless.com *To: *Ubiquiti Users Group ubnt_users@wispa.org mailto:ubnt_users@wispa.org *Sent: *Sunday, December 7, 2014 2:17:54 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Or just set the channel? I didn't exactly understand the stranding point either. On Dec 7, 2014, at 3:12 PM, Rory Conaway r...@triadwireless.net mailto:r...@triadwireless.net wrote: Set the frequency list to what range you need before you reboot. rory *From:*ubnt_users-boun...@wispa.org mailto:ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On Behalf Of *Josh Luthman *Sent:* Sunday, December 7, 2014 12:09 PM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Old Rockets, weird problems What is it working on? Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 2:07 PM, Mike Hammett wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net wrote: Nope. I did not reboot after setting country code back to US, though, as I don't want to strand them on an unusable 5.8 channel. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com *From: *Josh Luthman j...@imaginenetworksllc.com mailto:j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org mailto:ubnt_users@wispa.org *Sent: *Sunday, December 7, 2014 1:01:59 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems The frequencies aren't listed? Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 2:00 PM, Mike Hammett wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net wrote: I believe that has been done. Definitely the reboot both sides. The DFS checkbox\fields are definitely not there. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com *From: *Josh Luthman j...@imaginenetworksllc.com mailto:j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org mailto:ubnt_users@wispa.org *Sent: *Sunday, December 7, 2014 12:47:46 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Old rocket, plug in DFS credentials for your company, reboot BOTH SIDES. BOTH. Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 1:45 PM, Mike Hammett wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net wrote: I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them as needed throughout the years. The past day or two, performance in on part of the
Re: [Ubnt_users] Old Rockets, weird problems
Yeah, yeah, this would have been deployed over four years ago. I guess it's a testament to how rarely I've had to manually log into the radio and poke around for what's wrong with something to have noticed it wasn't compliant. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Matt Hoppes mhop...@indigowireless.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 2:10:37 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems This is why friends don't let friends use Compliance Test :) On 12/7/14, 11:24 PM, Mike Hammett wrote: That's what I started working on when I noticed it was in compliance test, but I can't have the link die because the Rocket fails to connect because it only thinks 5.8 is available when it is allowed DFS and 5150. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com *From: *Josh Luthman j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org *Sent: *Sunday, December 7, 2014 9:56:11 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Get out of compliance test? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 9:45 PM, Mike Hammett wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net wrote: I can't set a DFS channel as there aren't any available. This is a link that I probably setup 4 years ago and forgot about save for some airControl upgrades over time. I probably went through all radios entering the DFS code when I got them in the mail. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com *From: *Matt Hoppes mhop...@indigowireless.com mailto:mhop...@indigowireless.com *To: *Ubiquiti Users Group ubnt_users@wispa.org mailto:ubnt_users@wispa.org *Sent: *Sunday, December 7, 2014 2:17:54 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Or just set the channel? I didn't exactly understand the stranding point either. On Dec 7, 2014, at 3:12 PM, Rory Conaway r...@triadwireless.net mailto:r...@triadwireless.net wrote: Set the frequency list to what range you need before you reboot. rory *From:*ubnt_users-boun...@wispa.org mailto:ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On Behalf Of *Josh Luthman *Sent:* Sunday, December 7, 2014 12:09 PM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Old Rockets, weird problems What is it working on? Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 2:07 PM, Mike Hammett wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net wrote: Nope. I did not reboot after setting country code back to US, though, as I don't want to strand them on an unusable 5.8 channel. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com *From: *Josh Luthman j...@imaginenetworksllc.com mailto:j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org mailto:ubnt_users@wispa.org *Sent: *Sunday, December 7, 2014 1:01:59 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems The frequencies aren't listed? Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 2:00 PM, Mike Hammett wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net wrote: I believe that has been done. Definitely the reboot both sides. The DFS checkbox\fields are definitely not there. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com *From: *Josh Luthman j...@imaginenetworksllc.com mailto:j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org mailto:ubnt_users@wispa.org *Sent: *Sunday, December 7, 2014 12:47:46 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Old rocket, plug in DFS credentials for your company, reboot BOTH SIDES. BOTH. Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 1:45 PM, Mike Hammett wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net wrote: I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them as needed throughout the years. The past day or two, performance in on part of the network has been erratic to say the best of
Re: [Ubnt_users] Old Rockets, weird problems
You must have already DFS enabled in that rocket. Mike is talking about an older rocket before DFS was approved on the rockets. I ran into the same issue trying to use the 5240. I upgraded directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I downgraded checked the uni box entered my codes and voila when I upgraded to 5.5.10 there was the 5160-5240. (eventhought those are not DFS :-) - Original Message - From: Josh Luthman To: Ubiquiti Users Group Sent: Sunday, December 07, 2014 5:17 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems I just upgraded a pair of Rockets to 5.5.10 and was able to enable DFS. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 8:11 PM, Jason Bailey j284...@yahoo.com wrote: Going back to 5.5.8 and clicking the uni-2 box on the system page will get you there. On Sunday, December 7, 2014 8:08 PM, Kees H wi...@calbroadband.com wrote: You have to downgrade the software ( I think it was 5.5.4 that had the DFS key) then enter the dfs key and then upgrade. - Original Message - From: Mike Hammett To: Ubiquiti Users Group Sent: Sunday, December 07, 2014 11:00 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems I believe that has been done. Definitely the reboot both sides. The DFS checkbox\fields are definitely not there. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Sunday, December 7, 2014 12:47:46 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems Old rocket, plug in DFS credentials for your company, reboot BOTH SIDES. BOTH. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 1:45 PM, Mike Hammett wispaubntus...@ics-il.net wrote: I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them as needed throughout the years. The past day or two, performance in on part of the network has been erratic to say the best of it. I noticed that they were in Compliance Test mode, but didn't have the input boxes for the DFS stuff, so I must have entered it at one point, but never actually moved over. They were on 5.5.2. Don't fuck with what works. Well, now it's not working right. I upgrade to 5.5.4, then 5.5.10. I set the country code to US no DFS channels show up on the AP. Do I need to reboot it after setting it to US so that I can get the DFS channels? A reset to defaults and starting over is kinda out of the question at the moment. Any other ideas? If I have to climb to replace radios, ePMPs are going up instead. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Old Rockets, weird problems
Ya that's what I said - I was able to enable DFS (using my company codes). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Dec 8, 2014 at 11:17 AM, Kees H wi...@calbroadband.com wrote: You must have already DFS enabled in that rocket. Mike is talking about an older rocket before DFS was approved on the rockets. I ran into the same issue trying to use the 5240. I upgraded directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I downgraded checked the uni box entered my codes and voila when I upgraded to 5.5.10 there was the 5160-5240. (eventhought those are not DFS :-) - Original Message - *From:* Josh Luthman j...@imaginenetworksllc.com *To:* Ubiquiti Users Group ubnt_users@wispa.org *Sent:* Sunday, December 07, 2014 5:17 PM *Subject:* Re: [Ubnt_users] Old Rockets, weird problems I just upgraded a pair of Rockets to 5.5.10 and was able to enable DFS. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 8:11 PM, Jason Bailey j284...@yahoo.com wrote: Going back to 5.5.8 and clicking the uni-2 box on the system page will get you there. On Sunday, December 7, 2014 8:08 PM, Kees H wi...@calbroadband.com wrote: You have to downgrade the software ( I think it was 5.5.4 that had the DFS key) then enter the dfs key and then upgrade. - Original Message - *From:* Mike Hammett wispaubntus...@ics-il.net *To:* Ubiquiti Users Group ubnt_users@wispa.org *Sent:* Sunday, December 07, 2014 11:00 AM *Subject:* Re: [Ubnt_users] Old Rockets, weird problems I believe that has been done. Definitely the reboot both sides. The DFS checkbox\fields are definitely not there. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- *From: *Josh Luthman j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org *Sent: *Sunday, December 7, 2014 12:47:46 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Old rocket, plug in DFS credentials for your company, reboot BOTH SIDES. BOTH. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 1:45 PM, Mike Hammett wispaubntus...@ics-il.net wrote: I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them as needed throughout the years. The past day or two, performance in on part of the network has been erratic to say the best of it. I noticed that they were in Compliance Test mode, but didn't have the input boxes for the DFS stuff, so I must have entered it at one point, but never actually moved over. They were on 5.5.2. Don't fuck with what works. Well, now it's not working right. I upgrade to 5.5.4, then 5.5.10. I set the country code to US no DFS channels show up on the AP. Do I need to reboot it after setting it to US so that I can get the DFS channels? A reset to defaults and starting over is kinda out of the question at the moment. Any other ideas? If I have to climb to replace radios, ePMPs are going up instead. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Old Rockets, weird problems
On the lower versions mine does not have the checkbox. I assume that I already entered that DFS information long ago when I received it from UBNT - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Kees H wi...@calbroadband.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 10:17:25 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems You must have already DFS enabled in that rocket. Mike is talking about an older rocket before DFS was approved on the rockets. I ran into the same issue trying to use the 5240. I upgraded directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I downgraded checked the uni box entered my codes and voila when I upgraded to 5.5.10 there was the 5160-5240. (eventhought those are not DFS :-) - Original Message - From: Josh Luthman To: Ubiquiti Users Group Sent: Sunday, December 07, 2014 5:17 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems I just upgraded a pair of Rockets to 5.5.10 and was able to enable DFS. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 8:11 PM, Jason Bailey j284...@yahoo.com wrote: blockquote Going back to 5.5.8 and clicking the uni-2 box on the system page will get you there. On Sunday, December 7, 2014 8:08 PM, Kees H wi...@calbroadband.com wrote: You have to downgrade the software ( I think it was 5.5.4 that had the DFS key) then enter the dfs key and then upgrade. blockquote - Original Message - From: Mike Hammett To: Ubiquiti Users Group Sent: Sunday, December 07, 2014 11:00 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems I believe that has been done. Definitely the reboot both sides. The DFS checkbox\fields are definitely not there. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Sunday, December 7, 2014 12:47:46 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems Old rocket, plug in DFS credentials for your company, reboot BOTH SIDES. BOTH. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 1:45 PM, Mike Hammett wispaubntus...@ics-il.net wrote: blockquote I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them as needed throughout the years. The past day or two, performance in on part of the network has been erratic to say the best of it. I noticed that they were in Compliance Test mode, but didn't have the input boxes for the DFS stuff, so I must have entered it at one point, but never actually moved over. They were on 5.5.2. Don't fuck with what works. Well, now it's not working right. I upgrade to 5.5.4, then 5.5.10. I set the country code to US no DFS channels show up on the AP. Do I need to reboot it after setting it to US so that I can get the DFS channels? A reset to defaults and starting over is kinda out of the question at the moment. Any other ideas? If I have to climb to replace radios, ePMPs are going up instead. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users /blockquote ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users /blockquote ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users /blockquote ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Old Rockets, weird problems
I wonder if there's some kind of a bug with entering the DFS code when it's in compliance mode. From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of Mike Hammett [wispaubntus...@ics-il.net] Sent: Monday, December 08, 2014 10:19 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Old Rockets, weird problems On the lower versions mine does not have the checkbox. I assume that I already entered that DFS information long ago when I received it from UBNT - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com [http://www.ics-il.com/images/fbicon.png]https://www.facebook.com/ICSIL[http://www.ics-il.com/images/googleicon.png]https://plus.google.com/+IntelligentComputingSolutionsDeKalb[http://www.ics-il.com/images/linkedinicon.png]https://www.linkedin.com/company/intelligent-computing-solutions[http://www.ics-il.com/images/twittericon.png]https://twitter.com/ICSIL From: Kees H wi...@calbroadband.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 10:17:25 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems You must have already DFS enabled in that rocket. Mike is talking about an older rocket before DFS was approved on the rockets. I ran into the same issue trying to use the 5240. I upgraded directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I downgraded checked the uni box entered my codes and voila when I upgraded to 5.5.10 there was the 5160-5240. (eventhought those are not DFS :-) - Original Message - From: Josh Luthmanmailto:j...@imaginenetworksllc.com To: Ubiquiti Users Groupmailto:ubnt_users@wispa.org Sent: Sunday, December 07, 2014 5:17 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems I just upgraded a pair of Rockets to 5.5.10 and was able to enable DFS. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 8:11 PM, Jason Bailey j284...@yahoo.commailto:j284...@yahoo.com wrote: Going back to 5.5.8 and clicking the uni-2 box on the system page will get you there. On Sunday, December 7, 2014 8:08 PM, Kees H wi...@calbroadband.commailto:wi...@calbroadband.com wrote: You have to downgrade the software ( I think it was 5.5.4 that had the DFS key) then enter the dfs key and then upgrade. - Original Message - From: Mike Hammettmailto:wispaubntus...@ics-il.net To: Ubiquiti Users Groupmailto:ubnt_users@wispa.org Sent: Sunday, December 07, 2014 11:00 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems I believe that has been done. Definitely the reboot both sides. The DFS checkbox\fields are definitely not there. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.comhttp://www.ics-il.com/ From: Josh Luthman j...@imaginenetworksllc.commailto:j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.orgmailto:ubnt_users@wispa.org Sent: Sunday, December 7, 2014 12:47:46 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems Old rocket, plug in DFS credentials for your company, reboot BOTH SIDES. BOTH. Josh Luthman Office: 937-552-2340tel:937-552-2340 Direct: 937-552-2343tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 1:45 PM, Mike Hammett wispaubntus...@ics-il.netmailto:wispaubntus...@ics-il.net wrote: I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them as needed throughout the years. The past day or two, performance in on part of the network has been erratic to say the best of it. I noticed that they were in Compliance Test mode, but didn't have the input boxes for the DFS stuff, so I must have entered it at one point, but never actually moved over. They were on 5.5.2. Don't fuck with what works. Well, now it's not working right. I upgrade to 5.5.4, then 5.5.10. I set the country code to US no DFS channels show up on the AP. Do I need to reboot it after setting it to US so that I can get the DFS channels? A reset to defaults and starting over is kinda out of the question at the moment. Any other ideas? If I have to climb to replace radios, ePMPs are going up instead. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.comhttp://www.ics-il.com/ ___ Ubnt_users mailing list Ubnt_users@wispa.orgmailto:Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.orgmailto:Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.orgmailto:Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.orgmailto:Ubnt_users@wispa.org
Re: [Ubnt_users] Old Rockets, weird problems
I've found that when you upgrade a device to 5.5.10, you'll often have to upgrade it to 5.5.10 twice. Simply reloading 5.5.10 and upgrading fixes it. josh reynolds :: chief information officer spitwspots :: www.spitwspots.com On 12/08/2014 07:17 AM, Kees H wrote: You must have already DFS enabled in that rocket. Mike is talking about an older rocket before DFS was approved on the rockets. I ran into the same issue trying to use the 5240. I upgraded directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I downgraded checked the uni box entered my codes and voila when I upgraded to 5.5.10 there was the 5160-5240. (eventhought those are not DFS :-) - Original Message - *From:* Josh Luthman mailto:j...@imaginenetworksllc.com *To:* Ubiquiti Users Group mailto:ubnt_users@wispa.org *Sent:* Sunday, December 07, 2014 5:17 PM *Subject:* Re: [Ubnt_users] Old Rockets, weird problems I just upgraded a pair of Rockets to 5.5.10 and was able to enable DFS. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 8:11 PM, Jason Bailey j284...@yahoo.com mailto:j284...@yahoo.com wrote: Going back to 5.5.8 and clicking the uni-2 box on the system page will get you there. On Sunday, December 7, 2014 8:08 PM, Kees H wi...@calbroadband.com mailto:wi...@calbroadband.com wrote: You have to downgrade the software ( I think it was 5.5.4 that had the DFS key) then enter the dfs key and then upgrade. - Original Message - *From:* Mike Hammett mailto:wispaubntus...@ics-il.net *To:* Ubiquiti Users Group mailto:ubnt_users@wispa.org *Sent:* Sunday, December 07, 2014 11:00 AM *Subject:* Re: [Ubnt_users] Old Rockets, weird problems I believe that has been done. Definitely the reboot both sides. The DFS checkbox\fields are definitely not there. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com http://www.ics-il.com/ *From: *Josh Luthman j...@imaginenetworksllc.com mailto:j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org mailto:ubnt_users@wispa.org *Sent: *Sunday, December 7, 2014 12:47:46 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Old rocket, plug in DFS credentials for your company, reboot BOTH SIDES. BOTH. Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 1:45 PM, Mike Hammett wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net wrote: I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them as needed throughout the years. The past day or two, performance in on part of the network has been erratic to say the best of it. I noticed that they were in Compliance Test mode, but didn't have the input boxes for the DFS stuff, so I must have entered it at one point, but never actually moved over. They were on 5.5.2. Don't fuck with what works. Well, now it's not working right. I upgrade to 5.5.4, then 5.5.10. I set the country code to US no DFS channels show up on the AP. Do I need to reboot it after setting it to US so that I can get the DFS channels? A reset to defaults and starting over is kinda out of the question at the moment. Any other ideas? If I have to climb to replace radios, ePMPs are going up instead. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com http://www.ics-il.com/ ___ Ubnt_users mailing list Ubnt_users@wispa.org mailto:Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org mailto:Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list
Re: [Ubnt_users] Old Rockets, weird problems
For clarification - the 2nd upgrade doesn't automaticallyenable dfs support, youstill have to add that first. What the 2nd upgrade to the same firmware fixes is the 5150-5250 not showing up. josh reynolds :: chief information officer spitwspots :: www.spitwspots.com On 12/08/2014 07:22 AM, Josh Reynolds wrote: I've found that when you upgrade a device to 5.5.10, you'll often have to upgrade it to 5.5.10 twice. Simply reloading 5.5.10 and upgrading fixes it. josh reynolds :: chief information officer spitwspots ::www.spitwspots.com On 12/08/2014 07:17 AM, Kees H wrote: You must have already DFS enabled in that rocket. Mike is talking about an older rocket before DFS was approved on the rockets. I ran into the same issue trying to use the 5240. I upgraded directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I downgraded checked the uni box entered my codes and voila when I upgraded to 5.5.10 there was the 5160-5240. (eventhought those are not DFS :-) - Original Message - *From:* Josh Luthman mailto:j...@imaginenetworksllc.com *To:* Ubiquiti Users Group mailto:ubnt_users@wispa.org *Sent:* Sunday, December 07, 2014 5:17 PM *Subject:* Re: [Ubnt_users] Old Rockets, weird problems I just upgraded a pair of Rockets to 5.5.10 and was able to enable DFS. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 8:11 PM, Jason Bailey j284...@yahoo.com mailto:j284...@yahoo.com wrote: Going back to 5.5.8 and clicking the uni-2 box on the system page will get you there. On Sunday, December 7, 2014 8:08 PM, Kees H wi...@calbroadband.com mailto:wi...@calbroadband.com wrote: You have to downgrade the software ( I think it was 5.5.4 that had the DFS key) then enter the dfs key and then upgrade. - Original Message - *From:* Mike Hammett mailto:wispaubntus...@ics-il.net *To:* Ubiquiti Users Group mailto:ubnt_users@wispa.org *Sent:* Sunday, December 07, 2014 11:00 AM *Subject:* Re: [Ubnt_users] Old Rockets, weird problems I believe that has been done. Definitely the reboot both sides. The DFS checkbox\fields are definitely not there. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com http://www.ics-il.com/ *From: *Josh Luthman j...@imaginenetworksllc.com mailto:j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org mailto:ubnt_users@wispa.org *Sent: *Sunday, December 7, 2014 12:47:46 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Old rocket, plug in DFS credentials for your company, reboot BOTH SIDES. BOTH. Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 1:45 PM, Mike Hammett wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net wrote: I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them as needed throughout the years. The past day or two, performance in on part of the network has been erratic to say the best of it. I noticed that they were in Compliance Test mode, but didn't have the input boxes for the DFS stuff, so I must have entered it at one point, but never actually moved over. They were on 5.5.2. Don't fuck with what works. Well, now it's not working right. I upgrade to 5.5.4, then 5.5.10. I set the country code to US no DFS channels show up on the AP. Do I need to reboot it after setting it to US so that I can get the DFS channels? A reset to defaults and starting over is kinda out of the question at the moment. Any other ideas? If I have to climb to replace radios, ePMPs are going up instead. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com http://www.ics-il.com/ ___ Ubnt_users mailing list Ubnt_users@wispa.org mailto:Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list
Re: [Ubnt_users] Old Rockets, weird problems
That's what I'm thinking Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Dec 8, 2014 at 11:20 AM, Mathew Howard mat...@litewire.net wrote: I wonder if there's some kind of a bug with entering the DFS code when it's in compliance mode. -- *From:* ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of Mike Hammett [wispaubntus...@ics-il.net] *Sent:* Monday, December 08, 2014 10:19 AM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Old Rockets, weird problems On the lower versions mine does not have the checkbox. I assume that I already entered that DFS information long ago when I received it from UBNT - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSIL https://plus.google.com/+IntelligentComputingSolutionsDeKalb https://www.linkedin.com/company/intelligent-computing-solutions https://twitter.com/ICSIL -- *From: *Kees H wi...@calbroadband.com *To: *Ubiquiti Users Group ubnt_users@wispa.org *Sent: *Monday, December 8, 2014 10:17:25 AM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems You must have already DFS enabled in that rocket. Mike is talking about an older rocket before DFS was approved on the rockets. I ran into the same issue trying to use the 5240. I upgraded directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I downgraded checked the uni box entered my codes and voila when I upgraded to 5.5.10 there was the 5160-5240. (eventhought those are not DFS :-) - Original Message - *From:* Josh Luthman j...@imaginenetworksllc.com *To:* Ubiquiti Users Group ubnt_users@wispa.org *Sent:* Sunday, December 07, 2014 5:17 PM *Subject:* Re: [Ubnt_users] Old Rockets, weird problems I just upgraded a pair of Rockets to 5.5.10 and was able to enable DFS. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 8:11 PM, Jason Bailey j284...@yahoo.com wrote: Going back to 5.5.8 and clicking the uni-2 box on the system page will get you there. On Sunday, December 7, 2014 8:08 PM, Kees H wi...@calbroadband.com wrote: You have to downgrade the software ( I think it was 5.5.4 that had the DFS key) then enter the dfs key and then upgrade. - Original Message - *From:* Mike Hammett wispaubntus...@ics-il.net *To:* Ubiquiti Users Group ubnt_users@wispa.org *Sent:* Sunday, December 07, 2014 11:00 AM *Subject:* Re: [Ubnt_users] Old Rockets, weird problems I believe that has been done. Definitely the reboot both sides. The DFS checkbox\fields are definitely not there. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -- *From: *Josh Luthman j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org *Sent: *Sunday, December 7, 2014 12:47:46 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Old rocket, plug in DFS credentials for your company, reboot BOTH SIDES. BOTH. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 1:45 PM, Mike Hammett wispaubntus...@ics-il.net wrote: I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them as needed throughout the years. The past day or two, performance in on part of the network has been erratic to say the best of it. I noticed that they were in Compliance Test mode, but didn't have the input boxes for the DFS stuff, so I must have entered it at one point, but never actually moved over. They were on 5.5.2. Don't fuck with what works. Well, now it's not working right. I upgrade to 5.5.4, then 5.5.10. I set the country code to US no DFS channels show up on the AP. Do I need to reboot it after setting it to US so that I can get the DFS channels? A reset to defaults and starting over is kinda out of the question at the moment. Any other ideas? If I have to climb to replace radios, ePMPs are going up instead. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org
Re: [Ubnt_users] Old Rockets, weird problems
Thanks to Josh Reynolds: XM.v5.5.6# cat /tmp/system.cfg | grep -i dfs radio.1.dfs.status=enabled So DFS is enabled. I noticed that the top of 5.8 is only around -80 noise, so maybe I can get a link after all. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 10:25:55 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems That's what I'm thinking Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Dec 8, 2014 at 11:20 AM, Mathew Howard mat...@litewire.net wrote: I wonder if there's some kind of a bug with entering the DFS code when it's in compliance mode. From: ubnt_users-boun...@wispa.org [ ubnt_users-boun...@wispa.org ] on behalf of Mike Hammett [ wispaubntus...@ics-il.net ] Sent: Monday, December 08, 2014 10:19 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Old Rockets, weird problems On the lower versions mine does not have the checkbox. I assume that I already entered that DFS information long ago when I received it from UBNT - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Kees H wi...@calbroadband.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 10:17:25 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems You must have already DFS enabled in that rocket. Mike is talking about an older rocket before DFS was approved on the rockets. I ran into the same issue trying to use the 5240. I upgraded directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I downgraded checked the uni box entered my codes and voila when I upgraded to 5.5.10 there was the 5160-5240. (eventhought those are not DFS :-) blockquote - Original Message - From: Josh Luthman To: Ubiquiti Users Group Sent: Sunday, December 07, 2014 5:17 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems I just upgraded a pair of Rockets to 5.5.10 and was able to enable DFS. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 8:11 PM, Jason Bailey j284...@yahoo.com wrote: blockquote Going back to 5.5.8 and clicking the uni-2 box on the system page will get you there. On Sunday, December 7, 2014 8:08 PM, Kees H wi...@calbroadband.com wrote: You have to downgrade the software ( I think it was 5.5.4 that had the DFS key) then enter the dfs key and then upgrade. blockquote - Original Message - From: Mike Hammett To: Ubiquiti Users Group Sent: Sunday, December 07, 2014 11:00 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems I believe that has been done. Definitely the reboot both sides. The DFS checkbox\fields are definitely not there. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Sunday, December 7, 2014 12:47:46 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems Old rocket, plug in DFS credentials for your company, reboot BOTH SIDES. BOTH. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 1:45 PM, Mike Hammett wispaubntus...@ics-il.net wrote: blockquote I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them as needed throughout the years. The past day or two, performance in on part of the network has been erratic to say the best of it. I noticed that they were in Compliance Test mode, but didn't have the input boxes for the DFS stuff, so I must have entered it at one point, but never actually moved over. They were on 5.5.2. Don't fuck with what works. Well, now it's not working right. I upgrade to 5.5.4, then 5.5.10. I set the country code to US no DFS channels show up on the AP. Do I need to reboot it after setting it to US so that I can get the DFS channels? A reset to defaults and starting over is kinda out of the question at the moment. Any other ideas? If I have to climb to replace radios, ePMPs are going up instead. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users /blockquote ___ Ubnt_users mailing list Ubnt_users@wispa.org
Re: [Ubnt_users] Old Rockets, weird problems
And you're on 5.5.10 after double-flashing, right? josh reynolds :: chief information officer spitwspots :: www.spitwspots.com On 12/08/2014 01:16 PM, Mike Hammett wrote: Nope, no DFS channels after setting US and picking a channel in 5.8. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSILhttps://plus.google.com/+IntelligentComputingSolutionsDeKalbhttps://www.linkedin.com/company/intelligent-computing-solutionshttps://twitter.com/ICSIL *From: *Mike Hammett wispaubntus...@ics-il.net *To: *Ubiquiti Users Group ubnt_users@wispa.org *Sent: *Monday, December 8, 2014 10:52:50 AM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Thanks to Josh Reynolds: XM.v5.5.6# cat /tmp/system.cfg | grep -i dfs radio.1.dfs.status=enabled So DFS is enabled. I noticed that the top of 5.8 is only around -80 noise, so maybe I can get a link after all. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSILhttps://plus.google.com/+IntelligentComputingSolutionsDeKalbhttps://www.linkedin.com/company/intelligent-computing-solutionshttps://twitter.com/ICSIL *From: *Josh Luthman j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org *Sent: *Monday, December 8, 2014 10:25:55 AM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems That's what I'm thinking Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Dec 8, 2014 at 11:20 AM, Mathew Howard mat...@litewire.net mailto:mat...@litewire.net wrote: I wonder if there's some kind of a bug with entering the DFS code when it's in compliance mode. *From:* ubnt_users-boun...@wispa.org mailto:ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org mailto:ubnt_users-boun...@wispa.org] on behalf of Mike Hammett [wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net] *Sent:* Monday, December 08, 2014 10:19 AM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Old Rockets, weird problems On the lower versions mine does not have the checkbox. I assume that I already entered that DFS information long ago when I received it from UBNT - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSILhttps://plus.google.com/+IntelligentComputingSolutionsDeKalbhttps://www.linkedin.com/company/intelligent-computing-solutionshttps://twitter.com/ICSIL *From: *Kees H wi...@calbroadband.com mailto:wi...@calbroadband.com *To: *Ubiquiti Users Group ubnt_users@wispa.org mailto:ubnt_users@wispa.org *Sent: *Monday, December 8, 2014 10:17:25 AM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems You must have already DFS enabled in that rocket. Mike is talking about an older rocket before DFS was approved on the rockets. I ran into the same issue trying to use the 5240. I upgraded directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I downgraded checked the uni box entered my codes and voila when I upgraded to 5.5.10 there was the 5160-5240. (eventhought those are not DFS :-) - Original Message - *From:* Josh Luthman mailto:j...@imaginenetworksllc.com *To:* Ubiquiti Users Group mailto:ubnt_users@wispa.org *Sent:* Sunday, December 07, 2014 5:17 PM *Subject:* Re: [Ubnt_users] Old Rockets, weird problems I just upgraded a pair of Rockets to 5.5.10 and was able to enable DFS. Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 8:11 PM, Jason Bailey j284...@yahoo.com mailto:j284...@yahoo.com wrote: Going back to 5.5.8 and clicking the uni-2 box on the system page will get you there. On Sunday, December 7, 2014 8:08 PM, Kees H wi...@calbroadband.com mailto:wi...@calbroadband.com wrote: You have to downgrade the software ( I think it was 5.5.4 that had the DFS key) then enter the dfs key and then upgrade. - Original Message - *From:* Mike Hammett mailto:wispaubntus...@ics-il.net *To:* Ubiquiti Users Group mailto:ubnt_users@wispa.org *Sent:* Sunday, December 07, 2014 11:00 AM *Subject:* Re: [Ubnt_users] Old Rockets, weird problems I believe that has been done. Definitely the reboot both sides.
Re: [Ubnt_users] Old Rockets, weird problems
UBNT: If at first first your firmware does not succeed, try, try, try, try, try, try, try again. I had to flash 5.5.10 three times to get what I'm supposed to be getting. Well, that I'm aware of. If anything else is missing, I'll have to go again. ;-) - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Josh Reynolds j...@spitwspots.com To: ubnt users ubnt_users@wispa.org Sent: Monday, December 8, 2014 4:37:08 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems And you're on 5.5.10 after double- flashing, right? josh reynolds :: chief information officer spitwspots :: www.spitwspots.com On 12/08/2014 01:16 PM, Mike Hammett wrote: Nope, no DFS channels after setting US and picking a channel in 5.8. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Mike Hammett wispaubntus...@ics-il.net To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 10:52:50 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems Thanks to Josh Reynolds: XM.v5.5.6# cat /tmp/system.cfg | grep -i dfs radio.1.dfs.status=enabled So DFS is enabled. I noticed that the top of 5.8 is only around -80 noise, so maybe I can get a link after all. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 10:25:55 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems That's what I'm thinking Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Dec 8, 2014 at 11:20 AM, Mathew Howard mat...@litewire.net wrote: blockquote I wonder if there's some kind of a bug with entering the DFS code when it's in compliance mode. From: ubnt_users-boun...@wispa.org [ ubnt_users-boun...@wispa.org ] on behalf of Mike Hammett [ wispaubntus...@ics-il.net ] Sent: Monday, December 08, 2014 10:19 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Old Rockets, weird problems On the lower versions mine does not have the checkbox. I assume that I already entered that DFS information long ago when I received it from UBNT - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Kees H wi...@calbroadband.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 10:17:25 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems You must have already DFS enabled in that rocket. Mike is talking about an older rocket before DFS was approved on the rockets. I ran into the same issue trying to use the 5240. I upgraded directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I downgraded checked the uni box entered my codes and voila when I upgraded to 5.5.10 there was the 5160-5240. (eventhought those are not DFS :-) blockquote - Original Message - From: Josh Luthman To: Ubiquiti Users Group Sent: Sunday, December 07, 2014 5:17 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems I just upgraded a pair of Rockets to 5.5.10 and was able to enable DFS. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 8:11 PM, Jason Bailey j284...@yahoo.com wrote: blockquote Going back to 5.5.8 and clicking the uni-2 box on the system page will get you there. On Sunday, December 7, 2014 8:08 PM, Kees H wi...@calbroadband.com wrote: You have to downgrade the software ( I think it was 5.5.4 that had the DFS key) then enter the dfs key and then upgrade. blockquote - Original Message - From: Mike Hammett To: Ubiquiti Users Group Sent: Sunday, December 07, 2014 11:00 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems I believe that has been done. Definitely the reboot both sides. The DFS checkbox\fields are definitely not there. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Sunday, December 7, 2014 12:47:46 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems Old rocket, plug in DFS credentials for your company, reboot BOTH SIDES. BOTH. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 1:45 PM, Mike Hammett wispaubntus...@ics-il.net wrote: blockquote I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them as needed throughout the years. The past day or two, performance in on part of the network has been erratic to say the best of it. I noticed that they were in Compliance Test mode, but didn't have the input boxes for the DFS stuff, so I must have entered it at one point, but never
Re: [Ubnt_users] Old Rockets, weird problems
That makes no sense, how would multiple identical writes get different results? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 8, 2014 6:02 PM, Mike Hammett wispaubntus...@ics-il.net wrote: UBNT: If at first first your firmware does not succeed, try, try, try, try, try, try, try again. I had to flash 5.5.10 three times to get what I'm supposed to be getting. Well, that I'm aware of. If anything else is missing, I'll have to go again. ;-) - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSIL https://plus.google.com/+IntelligentComputingSolutionsDeKalb https://www.linkedin.com/company/intelligent-computing-solutions https://twitter.com/ICSIL -- *From: *Josh Reynolds j...@spitwspots.com *To: *ubnt users ubnt_users@wispa.org *Sent: *Monday, December 8, 2014 4:37:08 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems And you're on 5.5.10 after double-flashing, right? josh reynolds :: chief information officer spitwspots :: www.spitwspots.com On 12/08/2014 01:16 PM, Mike Hammett wrote: Nope, no DFS channels after setting US and picking a channel in 5.8. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSIL https://plus.google.com/+IntelligentComputingSolutionsDeKalb https://www.linkedin.com/company/intelligent-computing-solutions https://twitter.com/ICSIL -- *From: *Mike Hammett wispaubntus...@ics-il.net wispaubntus...@ics-il.net *To: *Ubiquiti Users Group ubnt_users@wispa.org ubnt_users@wispa.org *Sent: *Monday, December 8, 2014 10:52:50 AM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Thanks to Josh Reynolds: XM.v5.5.6# cat /tmp/system.cfg | grep -i dfs radio.1.dfs.status=enabled So DFS is enabled. I noticed that the top of 5.8 is only around -80 noise, so maybe I can get a link after all. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSIL https://plus.google.com/+IntelligentComputingSolutionsDeKalb https://www.linkedin.com/company/intelligent-computing-solutions https://twitter.com/ICSIL -- *From: *Josh Luthman j...@imaginenetworksllc.com j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org ubnt_users@wispa.org *Sent: *Monday, December 8, 2014 10:25:55 AM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems That's what I'm thinking Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Dec 8, 2014 at 11:20 AM, Mathew Howard mat...@litewire.net wrote: I wonder if there's some kind of a bug with entering the DFS code when it's in compliance mode. -- *From:* ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of Mike Hammett [wispaubntus...@ics-il.net] *Sent:* Monday, December 08, 2014 10:19 AM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Old Rockets, weird problems On the lower versions mine does not have the checkbox. I assume that I already entered that DFS information long ago when I received it from UBNT - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSIL https://plus.google.com/+IntelligentComputingSolutionsDeKalb https://www.linkedin.com/company/intelligent-computing-solutions https://twitter.com/ICSIL -- *From: *Kees H wi...@calbroadband.com *To: *Ubiquiti Users Group ubnt_users@wispa.org *Sent: *Monday, December 8, 2014 10:17:25 AM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems You must have already DFS enabled in that rocket. Mike is talking about an older rocket before DFS was approved on the rockets. I ran into the same issue trying to use the 5240. I upgraded directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I downgraded checked the uni box entered my codes and voila when I upgraded to 5.5.10 there was the 5160-5240. (eventhought those are not DFS :-) - Original Message - *From:* Josh Luthman j...@imaginenetworksllc.com *To:* Ubiquiti Users Group ubnt_users@wispa.org *Sent:* Sunday, December 07, 2014 5:17 PM *Subject:* Re: [Ubnt_users] Old Rockets, weird problems I just upgraded a pair of Rockets to 5.5.10 and was able to enable DFS. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 8:11 PM, Jason Bailey j284...@yahoo.com wrote: Going back to 5.5.8 and clicking the uni-2 box on the system page will get you there. On Sunday, December 7, 2014 8:08 PM, Kees H wi...@calbroadband.com wrote: You have to downgrade the software ( I think it was 5.5.4 that had the DFS key) then enter the dfs key and then upgrade. -
Re: [Ubnt_users] Old Rockets, weird problems
Per Josh Reynolds's recommendation, I flashed 5.5.10 twice. That let me choose DFS channels. I flashed it a third time and it let me get 5150.The first and last config files are identical. The one in the middle is just reverse alphabetical order from the others. If I just keep flashing can I get 4.9 and all the other bands? Maybe it becomes a 10GigE radio? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 5:06:39 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems That makes no sense, how would multiple identical writes get different results? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 8, 2014 6:02 PM, Mike Hammett wispaubntus...@ics-il.net wrote: UBNT: If at first first your firmware does not succeed, try, try, try, try, try, try, try again. I had to flash 5.5.10 three times to get what I'm supposed to be getting. Well, that I'm aware of. If anything else is missing, I'll have to go again. ;-) - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Josh Reynolds j...@spitwspots.com To: ubnt users ubnt_users@wispa.org Sent: Monday, December 8, 2014 4:37:08 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems And you're on 5.5.10 after double- flashing, right? josh reynolds :: chief information officer spitwspots :: www.spitwspots.com On 12/08/2014 01:16 PM, Mike Hammett wrote: blockquote Nope, no DFS channels after setting US and picking a channel in 5.8. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Mike Hammett wispaubntus...@ics-il.net To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 10:52:50 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems Thanks to Josh Reynolds: XM.v5.5.6# cat /tmp/system.cfg | grep -i dfs radio.1.dfs.status=enabled So DFS is enabled. I noticed that the top of 5.8 is only around -80 noise, so maybe I can get a link after all. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 10:25:55 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems That's what I'm thinking Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Dec 8, 2014 at 11:20 AM, Mathew Howard mat...@litewire.net wrote: blockquote I wonder if there's some kind of a bug with entering the DFS code when it's in compliance mode. From: ubnt_users-boun...@wispa.org [ ubnt_users-boun...@wispa.org ] on behalf of Mike Hammett [ wispaubntus...@ics-il.net ] Sent: Monday, December 08, 2014 10:19 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Old Rockets, weird problems On the lower versions mine does not have the checkbox. I assume that I already entered that DFS information long ago when I received it from UBNT - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Kees H wi...@calbroadband.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 10:17:25 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems You must have already DFS enabled in that rocket. Mike is talking about an older rocket before DFS was approved on the rockets. I ran into the same issue trying to use the 5240. I upgraded directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I downgraded checked the uni box entered my codes and voila when I upgraded to 5.5.10 there was the 5160-5240. (eventhought those are not DFS :-) blockquote - Original Message - From: Josh Luthman To: Ubiquiti Users Group Sent: Sunday, December 07, 2014 5:17 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems I just upgraded a pair of Rockets to 5.5.10 and was able to enable DFS. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 8:11 PM, Jason Bailey j284...@yahoo.com wrote: blockquote Going back to 5.5.8 and clicking the uni-2 box on the system page will get you there. On Sunday, December 7, 2014 8:08 PM, Kees H wi...@calbroadband.com wrote: You have to downgrade the software ( I think it was 5.5.4 that had the DFS key) then enter the dfs key and then upgrade. blockquote - Original Message - From: Mike Hammett To: Ubiquiti Users Group Sent: Sunday, December 07, 2014 11:00 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems I believe that has been done. Definitely the reboot both sides. The DFS checkbox\fields are definitely not there. - Mike Hammett Intelligent
Re: [Ubnt_users] Old Rockets, weird problems
https://www.youtube.com/watch?v=FsZIO-vmn3c josh reynolds :: chief information officer spitwspots :: www.spitwspots.com On 12/08/2014 02:09 PM, Mike Hammett wrote: Per Josh Reynolds's recommendation, I flashed 5.5.10 twice. That let me choose DFS channels. I flashed it a third time and it let me get 5150.The first and last config files are identical. The one in the middle is just reverse alphabetical order from the others. If I just keep flashing can I get 4.9 and all the other bands? Maybe it becomes a 10GigE radio? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSILhttps://plus.google.com/+IntelligentComputingSolutionsDeKalbhttps://www.linkedin.com/company/intelligent-computing-solutionshttps://twitter.com/ICSIL *From: *Josh Luthman j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org *Sent: *Monday, December 8, 2014 5:06:39 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems That makes no sense, how would multiple identical writes get different results? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 8, 2014 6:02 PM, Mike Hammett wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net wrote: UBNT: If at first first your firmware does not succeed, try, try, try, try, try, try, try again. I had to flash 5.5.10 three times to get what I'm supposed to be getting. Well, that I'm aware of. If anything else is missing, I'll have to go again. ;-) - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSILhttps://plus.google.com/+IntelligentComputingSolutionsDeKalbhttps://www.linkedin.com/company/intelligent-computing-solutionshttps://twitter.com/ICSIL *From: *Josh Reynolds j...@spitwspots.com mailto:j...@spitwspots.com *To: *ubnt users ubnt_users@wispa.org mailto:ubnt_users@wispa.org *Sent: *Monday, December 8, 2014 4:37:08 PM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems And you're on 5.5.10 after double-flashing, right? josh reynolds :: chief information officer spitwspots ::www.spitwspots.com http://www.spitwspots.com On 12/08/2014 01:16 PM, Mike Hammett wrote: Nope, no DFS channels after setting US and picking a channel in 5.8. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSILhttps://plus.google.com/+IntelligentComputingSolutionsDeKalbhttps://www.linkedin.com/company/intelligent-computing-solutionshttps://twitter.com/ICSIL *From: *Mike Hammett wispaubntus...@ics-il.net mailto:wispaubntus...@ics-il.net *To: *Ubiquiti Users Group ubnt_users@wispa.org mailto:ubnt_users@wispa.org *Sent: *Monday, December 8, 2014 10:52:50 AM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems Thanks to Josh Reynolds: XM.v5.5.6# cat /tmp/system.cfg | grep -i dfs radio.1.dfs.status=enabled So DFS is enabled. I noticed that the top of 5.8 is only around -80 noise, so maybe I can get a link after all. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSILhttps://plus.google.com/+IntelligentComputingSolutionsDeKalbhttps://www.linkedin.com/company/intelligent-computing-solutionshttps://twitter.com/ICSIL *From: *Josh Luthman j...@imaginenetworksllc.com mailto:j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org mailto:ubnt_users@wispa.org *Sent: *Monday, December 8, 2014 10:25:55 AM *Subject: *Re: [Ubnt_users] Old Rockets, weird problems That's what I'm thinking Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Dec 8, 2014 at 11:20 AM, Mathew Howard mat...@litewire.net mailto:mat...@litewire.net wrote: I wonder if there's some kind of a bug with entering the DFS code when it's in compliance mode. *From:* ubnt_users-boun...@wispa.org mailto:ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org mailto:ubnt_users-boun...@wispa.org] on behalf of Mike Hammett [wispaubntus...@ics-il.net
Re: [Ubnt_users] Old Rockets, weird problems
I'm thinking more likely, after about the 5th flash, stuff will start going away again... until eventually the radio will just be completely disabled. :P From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of Mike Hammett [wispaubntus...@ics-il.net] Sent: Monday, December 08, 2014 5:09 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Old Rockets, weird problems Per Josh Reynolds's recommendation, I flashed 5.5.10 twice. That let me choose DFS channels. I flashed it a third time and it let me get 5150.The first and last config files are identical. The one in the middle is just reverse alphabetical order from the others. If I just keep flashing can I get 4.9 and all the other bands? Maybe it becomes a 10GigE radio? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com [http://www.ics-il.com/images/fbicon.png]https://www.facebook.com/ICSIL[http://www.ics-il.com/images/googleicon.png]https://plus.google.com/+IntelligentComputingSolutionsDeKalb[http://www.ics-il.com/images/linkedinicon.png]https://www.linkedin.com/company/intelligent-computing-solutions[http://www.ics-il.com/images/twittericon.png]https://twitter.com/ICSIL From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Monday, December 8, 2014 5:06:39 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems That makes no sense, how would multiple identical writes get different results? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 8, 2014 6:02 PM, Mike Hammett wispaubntus...@ics-il.netmailto:wispaubntus...@ics-il.net wrote: UBNT: If at first first your firmware does not succeed, try, try, try, try, try, try, try again. I had to flash 5.5.10 three times to get what I'm supposed to be getting. Well, that I'm aware of. If anything else is missing, I'll have to go again. ;-) - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com [http://www.ics-il.com/images/fbicon.png]https://www.facebook.com/ICSIL[http://www.ics-il.com/images/googleicon.png]https://plus.google.com/+IntelligentComputingSolutionsDeKalb[http://www.ics-il.com/images/linkedinicon.png]https://www.linkedin.com/company/intelligent-computing-solutions[http://www.ics-il.com/images/twittericon.png]https://twitter.com/ICSIL From: Josh Reynolds j...@spitwspots.commailto:j...@spitwspots.com To: ubnt users ubnt_users@wispa.orgmailto:ubnt_users@wispa.org Sent: Monday, December 8, 2014 4:37:08 PM Subject: Re: [Ubnt_users] Old Rockets, weird problems And you're on 5.5.10 after double-flashing, right? josh reynolds :: chief information officer spitwspots :: www.spitwspots.comhttp://www.spitwspots.com On 12/08/2014 01:16 PM, Mike Hammett wrote: Nope, no DFS channels after setting US and picking a channel in 5.8. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com [http://www.ics-il.com/images/fbicon.png]https://www.facebook.com/ICSIL[http://www.ics-il.com/images/googleicon.png]https://plus.google.com/+IntelligentComputingSolutionsDeKalb[http://www.ics-il.com/images/linkedinicon.png]https://www.linkedin.com/company/intelligent-computing-solutions[http://www.ics-il.com/images/twittericon.png]https://twitter.com/ICSIL From: Mike Hammett wispaubntus...@ics-il.netmailto:wispaubntus...@ics-il.net To: Ubiquiti Users Group ubnt_users@wispa.orgmailto:ubnt_users@wispa.org Sent: Monday, December 8, 2014 10:52:50 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems Thanks to Josh Reynolds: XM.v5.5.6# cat /tmp/system.cfg | grep -i dfs radio.1.dfs.status=enabled So DFS is enabled. I noticed that the top of 5.8 is only around -80 noise, so maybe I can get a link after all. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com [http://www.ics-il.com/images/fbicon.png]https://www.facebook.com/ICSIL[http://www.ics-il.com/images/googleicon.png]https://plus.google.com/+IntelligentComputingSolutionsDeKalb[http://www.ics-il.com/images/linkedinicon.png]https://www.linkedin.com/company/intelligent-computing-solutions[http://www.ics-il.com/images/twittericon.png]https://twitter.com/ICSIL From: Josh Luthman j...@imaginenetworksllc.commailto:j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.orgmailto:ubnt_users@wispa.org Sent: Monday, December 8, 2014 10:25:55 AM Subject: Re: [Ubnt_users] Old Rockets, weird problems That's what I'm thinking Josh Luthman Office: 937-552-2340tel:937-552-2340 Direct: 937-552-2343tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Dec 8, 2014 at 11:20 AM, Mathew Howard mat...@litewire.netmailto:mat...@litewire.net wrote: I wonder if there's some kind of a bug with entering the DFS code when it's in compliance mode.
