Well I'm trying to stick with DC so that won't cut it here :(
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Jan 4, 2019, 7:50 PM RickG I have the same issue with a Cambium ePMP 2000 talking to a Netonix
> switch. If I use the Cambium POE
I have the same issue with a Cambium ePMP 2000 talking to a Netonix switch.
If I use the Cambium POE all is well!
On Fri, Jan 4, 2019 at 4:43 PM Josh Luthman
wrote:
> I have several sites out in the field with Powerbox Pro and once I forced
> poe on, it works just fine with af5xHD.
>
> In the
That does sound like a possibility.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Jan 4, 2019, 5:34 PM Mathew Howard It seems like power being active on that cable is somehow generating some
> kind of noise that's screwing up the
It seems like power being active on that cable is somehow generating some kind
of noise that's screwing up the ethernet, but I have no idea how or why that
would be happening. It sounds a lot like the issues that FM transmitters can
cause on ethernet.
From:
Problem continues if I disable eth3 port on bridge.
With epmp poe off I get gig full, no problems.
FYI I have a 155 watt power supply and even if each device was 7 watts, it
isn't, that's still only 21 watts. I'm supplying 27.5 volts at this time
(cables are only a few feet for everything).
We had a port go bad on a Mikrotik the other day, and after we plugged the
customer's router into a different port, it still wouldn't pass any data until
I disabled the bad port (actually, I think just removing it from the bridge
group fixed it)... the only reason I mention that is because
It happens on two Powerbox Pro units, so I'm guessing a grounding issue or
some sort of noise in the office. There are no surge cards in the lab at
this point.
Yes - simply the cable in the port. I plugged in an epmp and it worked
just fine, but I lost the af5xHD. If I unplug the cable from
Most devices won't let turn off auto negotiation on gigabit, but what you can
do is set it to only advertise gig full (I know you can do this on the Mikrotik
by just unchecking everything else, and I think you can do it on the af5xhd
too, but I'm not certain about that). That probably isn't
I have several sites out in the field with Powerbox Pro and once I forced
poe on, it works just fine with af5xHD.
In the office, though, I have weird issues where if a cable is plugged into
another port (just simply a cable, no other device) it goes from auto
(doing gig full) to interface up/down
