Hot signal?
On Sun, June 12, 2016 2:33 am, Rory Conaway wrote:
> I've got a user that isn't even a few hundred feet on a Rocket 5 AC-Lite.
> Most users on this AP can pull 50-60Mbps with no problem. This user is
> getting 2-4Mbps down and 18 up. Ping times are all over the place to as
> much as
Someone make a 5.6.4 with the directories locked down and see if it's
5.6.4 that's better.
On Fri, June 24, 2016 2:54 am, Kevin Sullivan wrote:
> We're seeing something similar. All the stations show associated at
> normal RSSI levels, but we lose 90% packets or more. A reboot brings the
> users
Is the CPE in bridge mode?
On Fri, June 24, 2016 11:29 am, Steve Barnes wrote:
> We use Mikrotik Hotspot to Authenticate users against radius and create
> QUEUES at the Hotspot Router. As soon as CPE WDS is turned on, the CPE
> MAC becomes transparent and passes the customers router MAC on to
way to control something remotely
> with a static public IP address.
>
> Apparently one of us was doing something wrong that caused a loop that
> Netonix caught.
>
>
> On Jan 26, 2017 6:24 AM, "Stuart Pierce" <spie...@avolve.net> wrote:
>
>
>> 99.
99.86% sure it's paranoia, but I'd like to know what Mr. WILSON ( sorry I
was channeling my inner Dennis ) thinks the customer was setting up.
On Thu, January 26, 2017 12:53 am, RickG wrote:
> Ya know, I've always suspected UBNT CPE leaks or am I just paranoid?
>
>
> On Wed, Jan 25, 2017 at 9:41
That you sold?
On Thu, February 23, 2017 7:34 pm, Rory Conaway wrote:
> Have to pull receipts for every device we sold that was defective, then
> have to wait at least a week or more to hear something back to even ship
> it out.
>
> Rory Conaway * Triad Wireless * CEO
> 4226 S. 37th Street *
I don't have a problem with it even on my cheap andriod phone.
On Wed, February 22, 2017 6:37 pm, Josh Luthman wrote:
> Even on your phone??
>
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Wed, Feb 22, 2017 at 6:07 PM, Matt
Well I don't install at night..
On Wed, February 22, 2017 7:33 pm, James Wilson wrote:
> Try to read this in the daylight...
>
>
> On Feb 22, 2017 7:25 PM, "Stuart Pierce" <spie...@avolve.net> wrote:
>
>
>> I don't have a problem with it even on
I keep reading that subject as Version 6.0..
On Tue, January 17, 2017 7:52 pm, Shawn C. Peppers wrote:
> Am i the only person that thinks its strange that manufacturing a device
> that doesn't natively support/have ipv6 built in is borderline wreakless
> and crazy
>
> Shawn C. Peppers
>
I haven't had any showstoppers but I don't go crazy on configurations either.
On Tue, January 17, 2017 10:22 pm, Jon Langeler wrote:
> Are both stable and ready to use?
>
>
> Jon Langeler
> Michwave Technologies, Inc.
>
>
> ___
> Ubnt_users mailing list
Are you on 5.6.9 on AP's and all CPE's? If not, I would.
On Sun, January 15, 2017 11:58 am, Rory Conaway wrote:
> Just had to replace 3 Nanostation Locos because 6.0 wouldn't connect
> between them for some unknown reason. Throwing in a Nanobeam-19 didn't
> help. Now I have 30 users that
getting scarce
>>
>>
>>
>>
>> Found him:
>>
>>
>>
>>
>> http://www.seattletimes.com/sports/seahawks/ldquoseahawksrdquo-fan-
>> survives-a-night-out-in-new-orleans/
>>
>>
>>
>> ;)
>>
>>
>>
>>
>> AC u
How about the AC stuff, just think if you were trying to ahold of them,
it's like trying to find a Seahawk fan in New Orleans.
On Wed, September 14, 2016 6:54 pm, Forbes Mercy wrote:
> Despite the best efforts of Ubiquiti to get me to throw out a couple
> thousand NanoBridge CPE and buy AC's I
Seriously, I do like the new ethernet door, but what is up with not being
able to flip the mount !?!?!?!
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
y I got
> one to test.
>
> We keep a supply of NanoBridges around for when we need to flip.
>
>
>> On Oct 1, 2016, at 21:44, Stuart Pierce <spie...@avolve.net> wrote:
>>
>>
>> Seriously, I do like the new ethernet door, but wha
What's the optional bigger power supply for the EdgePoint to power 5
R5AC-Lite's?
On Mon, November 21, 2016 3:28 pm, Brandon Gilles via Ubnt_users wrote:
> Actually, no (sorry). The magnetics are only rated for powering the
> switch itself, and then say a single PoE-out device. They'd get
>
WDS? Auto Distance unchecked? both same firmware version?
On Wed, November 23, 2016 12:47 pm, Mike Hammett wrote:
> I have a link that's a couple hundred feet. -57 or so signal with
> balanced chains. CCQ, AMC and AMQ are all above 95%. I only can get
> double digit KILObit throughput one
;
>
> The Brothers WISP
>
>
> - Original Message -
>
>
> From: "Stuart Pierce" <spie...@avolve.net>
> To: "Ubiquiti Users Group" <ubnt_users@wispa.org>
> Sent: Wednesday, November 23, 2016 1:06:16 PM
> Subject: Re: [Ubnt_users] Great
Check the config file and see if it is actually set, otherwise try
unchecking it, reboot, check it, and reboot.
On Tue, November 1, 2016 6:06 pm, Chris Fabien wrote:
> Well it did it agian, i guess i am going to replace the radios and see if
> that fixes it.
>
> On Nov 1, 2016 11:50 AM, "Chris
Sounds like they could have possibly been infected.
On Mon, October 10, 2016 5:43 pm, Doug wrote:
> We loaded XW firmware on them as all new radios are xx hardware. I've
> certainly seen the error when loading the incorrect firmware from the GUI.
> We did not get that error. It also doesn't
0 to fix the problem or $120 + $50 truck roll to fix the
>>>>>>>> problem
>>>>>>>>
>>>>>>>>
>>>>>>>> Josh Luthman
>>>>>>>> Office: 937-552-2340 <%28937%29%20552-2340>
>>&
mett <
>>>>>> wispaubntus...@ics-il.net> wrote:
>>>>>>
>>>>>>> That's a lot cheaper than a whole CPE plus a truck roll.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>
Course you have to pay a half to a third per cpe for this option.
On Tue, December 6, 2016 11:26 pm, RickG wrote:
> I'm just waiting to hear how well it's working out from all you guinea
> pigs :P
>
>
> On Tue, Dec 6, 2016 at 11:13 PM, Josh Luthman
>
> wrote:
>
>
>>
The latest betas of each branch have been working pretty good for me, the
RC's not so good, to many drops.
On Fri, December 9, 2016 12:08 pm, CBB - Jay Fuller wrote:
>
>
> We are still on 5.6.3 because of these reports
>
>
> - Original Message -
> From: Justin Wilson
> To: Ubiquiti Users
In AC1, weren't you able to script a task to execute on the devices? I
don't see where you can do that in AC2.
On Fri, January 6, 2017 4:04 pm, CBB - Jay Fuller wrote:
>
> yes - we dealt with this a few years ago - several radios were talking to
> an old server the company we purchased ran.
Just a good SOP on up/down-grading. Why? Who knows, memory leaks or
whatever. If it's up for more than 7 days, I reboot.
On Thu, January 5, 2017 9:33 pm, Jerry Head wrote:
> Why?
> I did not.
>
>
> On 1/5/2017 6:01 PM, Stuart Pierce wrote:
>
>> Make sure you reb
That was going to be my next, you can use one for 'backhaul' and one for
'access', either one right?
When do the Ubiquiti Dual-Band antennas come out for these babies?
On Sun, December 18, 2016 12:38 am, Brandon Gilles via Ubnt_users wrote:
> Yes, cuts on half. It's not a dedicated radio:
>
>
>
How many cpe's on the ap?
Are you saying you tried 5.6.2 to 5.6.9 and a couple of betas on the AP?
Is the AP an XM version?
What firmware versions are on the CPE?
Don't suppose there is a ping watchdog on the AP.
On Tue, December 27, 2016 10:42 pm, Rory Conaway wrote:
> We tried 3 different
AC AP to M CPE's for almost a year. I'm swapping out M's for AC's and it's
going pretty good. If they don't come out with some Prism2AC's toot sweet
it will be elevated. Just saying.
On Sat, December 24, 2016 12:08 pm, RickG wrote:
> PtMP to M radio CPE?
>
>
> On Sat, Dec 24, 2016 at 12:06 PM,
lol, yea they are all test networks. I will have to admit that 6.0 was
probably the worst official release. Now as I've said before, 8.0 to 6.0
has been solid.and therein I believe is the problem.
On Sun, January 15, 2017 5:26 pm, Mike Hammett wrote:
> We all have test networks. Some of us
Since airLink uses Google maps, what's the chance a map tag can be placed
where the address is you searched for?
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
31 matches
Mail list logo