: Monday, September 5, 2016 7:36 PM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] Bad Omni???
Interesting enough, I just had a KPP omni blow it's top. I've had a few UBNT's
do it but this is the 1st KPP.
On Mon, Sep 5, 2016 at 12:25 PM, Mathew Howard
<mat...@litewire.net<mailto:mat...@litewi
> behalf of Jonathan Taylor [jtay...@wisouth.net]
> *Sent:* Sunday, September 04, 2016 9:15 PM
> *To:* Ubiquiti Users Group
> *Subject:* Re: [Ubnt_users] Bad Omni???
>
> Which antennas do you use?
>
> *Jonathan Taylor*
> *WiSouth Networks, LLC*
> jtay...@wisouth.net
>
t; *Sent:* Sunday, September 04, 2016 8:17 PM
> *To:* Ubiquiti Users Group
> *Subject:* Re: [Ubnt_users] Bad Omni???
>
> If a rain effects things like that in 2 GHz it's well past time to replace
> that thing.
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
>
of
Josh Luthman [j...@imaginenetworksllc.com]
Sent: Sunday, September 04, 2016 8:17 PM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] Bad Omni???
If a rain effects things like that in 2 GHz it's well past time to replace that
thing.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100
If a rain effects things like that in 2 GHz it's well past time to replace
that thing.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Sun, Sep 4, 2016 at 9:15 PM, Jonathan Taylor wrote:
> Yea it is around 3-4 years old
I just took one of these apart like this. I suspected a problem but ours
was still operating fine. Some of the screws in the base had worked loose.
The elements are fed by short pieces of coax so the movement does not mean
a broken circuit board or connector or something.
The faulire mode we
I've always used Kp Omni's so I don't have these problems ;)
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Sep 4, 2016 8:44 PM, "Jonathan Taylor" wrote:
> What about rain running down the radome and buidling up inside? I
What about rain running down the radome and buidling up inside? I have
never taken one of these apart so i don't know what it looks like on the
bottom.
*Jonathan Taylor*
*WiSouth Networks, LLC*
jtay...@wisouth.net
*(334) 595-9521*
On Sun, Sep 4, 2016 at 7:38 PM, Josh Luthman
I seriously doubt it :(
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Sep 4, 2016 8:34 PM, "Jonathan Taylor" wrote:
> My AMO-2G13 wobles back and fourth at least an inch or two i can't
> pull up on it any but i can
My AMO-2G13 wobles back and fourth at least an inch or two i can't pull
up on it any but i can push it side to side. Should it do this? I don't
recall it doing that when i installed it.
And yes the mount does not move... it is the radome section that moves.
Normally i would look at air
10 matches
Mail list logo