Ohh yea, please ensure that your ACL's for Ampache are setup correctly
have a look at
http://ampache.org/wiki/config:amarok
Charlie
--
creash when searching ampache
https://bugs.launchpad.net/bugs/367737
You received this bug notification because you are a member of Kubuntu
Bugs, which is
** Description changed:
Using Jaunty Netbook Remix 9.04 dev branch with Haier X200. Have tried
various suggestions with similar bugs, such as getting xserver-xorg-
input-all but it says latest version is installed and still no touchpad
whatsoever (fyi version is 1:7.4~5ubuntu18). Only
I tried to upgrade
-bluez to 4.36-0ubuntu2 from blueman PPA (I also tried Baptiste PPA with
version 4.35)
-pulseaudio to 1:0.9.15-0ubuntu1~ppa4 from themuso PPA
but still it does not work:
Apr 26 23:24:01 manfredi bluetoothd[3210]: Unable to open seid 64
Apr 26 23:24:01 manfredi
I did fresh install on Jaunty and if i wasn't imagining things then i did this:
1.) X running in EXA (in default mode), alpha blending is correct, though
compiz is bit sluggish, glxgears ~195fps (compiz vsync off)
2.) Added AccelMethod UXA to xorg.conf, init.d/gdm stop/start, alpha blending
the problem bigan at the update to jaunty (report yesterday, and now when I try
to reinstall. ( arch i386 linux 2.6.28.11.15 )
the only pb I know is the compatibility wiht the graphic card intel 845.
--
package linux-image-2.6.28-11-generic 2.6.28-11.42 failed to install/upgrade:
le
It's not just Firefox, I noticed sound cuts out when I scroll in Geany
(programming editor) holding down the arrow key.
I notice this on a Intel core 2 computer.
Why doesn't sound use the 2nd processor so it doesn't block the sound when cpu
is 100%?
--
Scrolling Firefox interrupts Rhythmbox
I've test this on Ubuntu 9.04: the workaround is still necessary.
Infact, if I don't use file /etc/modprobe.d/pinnacle-pctv I can watch
tv but i cannot hear the audio, only white noise.
I have rename /etc/modprobe.d/pinnacle-pctv in /etc/modprobe.d
/pinnacle-pctv.conf, so I don't see any warning
Public bug reported:
1. Ubuntu Remix 9.04 released 20.04.2009
2. Ubuntu Remix 9.04 released 20.04.2009
3. Expected result: User-define backgound picture remains the same after reboot
4. Actual result: User-define backgound picture disappears and re-set to
default after system reboot.
**
Public bug reported:
Binary package hint: network-manager
* syslog has been attached.
I am using ATT Mobile Broadband USB dongle into DELL E6400. I have used
it from 8.10. A few days ago, I have upgraded to 9.04, and network-
manager suddenly started not to show the Mobile Broadband.
I have
** Attachment added: 3g-syslog1.log
http://launchpadlibrarian.net/26019071/3g-syslog1.log
--
ATT Mobile Broadband is not detected.
https://bugs.launchpad.net/bugs/367760
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Also affects: window-picker-applet
Importance: Undecided
Status: New
--
preferences dialog for window picker applet is unnecessary
https://bugs.launchpad.net/bugs/367759
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
* lshal log is attached as well.
** Attachment added: 3g-lshal.log
http://launchpadlibrarian.net/26019077/3g-lshal.log
--
ATT Mobile Broadband is not detected.
https://bugs.launchpad.net/bugs/367760
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Also affects: window-picker-applet
Importance: Undecided
Status: New
--
close button for applet preferences dialog does not trigger the window to close
https://bugs.launchpad.net/bugs/367756
You received this bug notification because you are a member of Ubuntu
Bugs, which is
This might be a bug in libdrm!?
Was this fixed in git ? I do see some vblank fixes committed!
--
[Regression] vblank interrupts increase during 'DPMS off'
https://bugs.launchpad.net/bugs/364639
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I have the some problems as described, numerous freezes. But have an
amd64 processor and nvidia graphics card
** Attachment added: lspci output
http://launchpadlibrarian.net/26019075/lspci.txt
--
[i965] X freezes starting on April 3rd
https://bugs.launchpad.net/bugs/359392
You received this
Fixed in Glade 3.6.2 (by removing support for treestore data)
--
GtkTreeStore doesn't handle GtkBuildable data tag.
https://bugs.launchpad.net/bugs/345989
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Hi Michael,
Thanks for your question about this issue
I was thinking about upgrade to heci-5.0.0.30 to fix this issue, but I
can not find changelog from any place (maybe I miss that), so I decide
to keep on the 3.2.0.24 and change the symbol name to fix the issue
Fortunately, the linux-2.6
Public bug reported:
After upgrade Ubuntu Server from 8.10 to 8.04 version I can't login to and
synchronize tasks with Eclipse in Trac projects:
1. login link missing,
2. after write URL to login page i got: No handler matched request to /login
3. trying to reconfigure permission via terminal
Cesar Arguinzones cea...@gmail.com writes:
Tvtime won't start in ubuntu 9.04, it show the following error message:
Cannot allocate enough off-screen video memory. This may be fixed by:
1. Closing or restarting large X applications.
2. Lowering the input width of tvtime
I had this problem, fixed it with the solution found here:
http://agoranetbook.kayno.net/?p=7
To can try it out by pressing 'e' in grub, without having to modify
menu.lst.
Good luck.
--
touchpad is not detected in jaunty 9.04
https://bugs.launchpad.net/bugs/359982
You received this bug
Michael Gefen, can you supply your error_log following the instructions
on
https://wiki.ubuntu.com/DebuggingPrintingProblems
Thanks.
--
cups always prints with the default page size
https://bugs.launchpad.net/bugs/357732
You received this bug notification because you are a member of Ubuntu
** Changed in: chardet (Ubuntu)
Status: New = Confirmed
--
Can't install on Jaunty
https://bugs.launchpad.net/bugs/342519
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I have had the same intermittent issue for the past 12 months, has happened 80%
of the time.
Yesterday occurred burning DVD .iso image but not when doing data DVD burn.
I'm running XUBUNTU 8.04 with SATA DVD burner:
ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
--
DVD burn terminates
Reassigning to libglade as upstream bug is against this product.
** Package changed: glade-3 (Ubuntu) = libglade (Ubuntu)
--
could not find a parent that handles internal children
https://bugs.launchpad.net/bugs/273233
You received this bug notification because you are a member of Ubuntu
Bugs,
I don't think the problem is in the metapackage ubuntu-virt-mgmt
directly. Package virt-manager also installs a complete virtualization
environment. So feel free to move this bug report around until it's in
the right project/package.
--
Server part of virtualization is installed
I should perhaps have added this:
lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
--
graphics contents (esp. lists) not displayed correctly in different applications
https://bugs.launchpad.net/bugs/367749
You
Jaunty 9.04
2.6.28-11-generic x86_64
GeForce 8200
Nvidia 180.44
When I try to enable compiz I get the Desktop effect could not be enabled
running compiz replace gets the same error listed above and my computer locks
up.
My card is not on the blacklist so I do not understand.
** Attachment
Public bug reported:
When doing installation of metapackage ubuntu-virt-mgmt, server parts is
also installed. Like libvirt-bin and kvm. This is an dependencies error.
ubuntu-virt-mgmt should in my meaning only install stuff that is used to
control a virtualization environment. Not create on as
ben bhaub...@gmail.com writes:
seems a duplicate of this:
337849
https://bugs.launchpad.net/ubuntu/+source/tasque/+bug/337849
perhaps. I'm affected without having taskque installed, though.
--
Gruesse/greetings,
Reinhard Tartler, KeyID 945348A4
--
deskbar-applet gconf errors keep popping
This bug is fixed by now as can be read here:
http://appdb.winehq.org/objectManager.php?sClass=versioniId=15607iTestingId=37224
K
** Changed in: wine (Ubuntu)
Status: New = Fix Released
--
Macmillan Dictionary causes an error
https://bugs.launchpad.net/bugs/256861
You received this bug
Public bug reported:
System configuration:
Kubuntu 64bit 9.04
(Linux ath64 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009
x86_64 GNU/Linux)
Hardware: MSI K9N Platinum motherboard (nVidia Nforce 570 chipset),
5 Gb DDR2-800 RAM
3 Hitachi HDDs attached over SATA2 links.
Thanks everyone for testing! I uploaded this to the jaunty-proposed
queue now, waiting for Steve or Colin to process:
udev (141-1.1) jaunty-proposed; urgency=low
* Fix detection of CD media:
- extras/cdrom_id/cdrom_id.c: Add a new key ID_CDROM_MEDIA=1 if there
is a CD present. Also,
** Attachment added: dmesg.txt
http://launchpadlibrarian.net/26019272/dmesg.txt
--
Slow boot times due to strange SATA errors.
https://bugs.launchpad.net/bugs/367764
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
after upgrading to jaunty this seems to be fixed.
the upgrade has apparently cleared out the hotkey-setup directory
entirely.
--
Contrast Increase hotkey on Acer Aspire One
https://bugs.launchpad.net/bugs/284466
You received this bug notification because you are a member of Ubuntu
Bugs, which
Fixes are committed upstream, so they'll land in karmic with the next
upstream git pull or release.
** Changed in: udev (Ubuntu)
Status: Triaged = Fix Committed
--
CD-ROM tray closes automatically after eject
https://bugs.launchpad.net/bugs/356631
You received this bug notification
On Mon, 2009-04-27 at 05:43 +, John Haitas wrote:
The fact is that this is not something an average user should worry about.
Most people don't care about the placement of these objects and applets.
In fact, I think average users do worry about buttons and icons which
end up in strange
Public bug reported:
Hello,
I' ve been just installing jaunty on my computer with the alternate cd.
When I insert an audio cd in my dvd player I always have a freeze. I m forced
to reboot my computer. But, when I insert a data cd or dvd, everything works
fine.
This 'functionality' worked fine
Public bug reported:
I tried making a bootable Jaunty 64-bit USB disk from Intrepid 32-bit to
install Jaunty on my HP Pavilion dv6137eu.
When using an Intrepid ISO image, this worked perfectly and I could boot
from the USB drive to install the OS. Last week, when Jaunty was
released, I made a
*** This bug is a duplicate of bug 312898 ***
https://bugs.launchpad.net/bugs/312898
** This bug has been marked a duplicate of bug 312898
libxxx-unstripped should also Provide libxxx
--
No missing unstripped-dev packages for the unstripped ffmpeg libs
Ok, I will report this issue to Gnome Bugzilla then.
--
gtk-button-images not respected
https://bugs.launchpad.net/bugs/367257
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Same laptop and i confirm the same problem.
Bye!
--
Noisy fan after resume on HP 6735s (reproducibility about 20%)
https://bugs.launchpad.net/bugs/343128
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I confirm this bug.
I have a Brother MFC9840 CDW printer with duplex printing capability.
This bug is appeared only when I have upgraded to Jaunty.
When you select DuplexNoTumble or DuplexTumble, the output is always like
DuplexNoTumble.
I have this problem with OpenOffice 3.0 (OOO3M15),
I tried to run the installer in debug mode and reproduce the problem but
looks like this time it worked (conditions were not identical, but I
thought the bug would show up again; guess the problem is a bit more
complex).
--
Installer fails to format partition
I can confirm that the icon now stays forever in my systray. I have to
quit it to remove it.
--
system-config-printer-applet should hide automatically when printing is complete
https://bugs.launchpad.net/bugs/151360
You received this bug notification because you are a member of Ubuntu
Bugs,
Thanks, Matthew!
yelp location updated in http://bazaar.launchpad.net/%7Eubuntu-core-
dev/jockey/ubuntu/revision/342
** Changed in: jockey (Ubuntu)
Status: Triaged = Fix Committed
--
Consistent terminology
https://bugs.launchpad.net/bugs/274845
You received this bug notification because
Bolster: yes, I also experience that, however this is a different bug.
Could you please open a separate bug about it ? Thanks !
--
virsh destroy might also kill another running VM
https://bugs.launchpad.net/bugs/362288
You received this bug notification because you are a member of Ubuntu
Bugs,
hi
should this bug be marked as a duplicate of bug #351990 ?
Problem seems to be very similar except that jason scurtu describes freezes
beeing persistent with composite disabled, where in the other bug report
freezes wont occour with compositing disabled.
--
[RV250][JAUNTY] X Freezes with
** Changed in: firefox
Status: Invalid = New
--
Menus in Firefox and Thunderbird are dark in the New Wave theme
https://bugs.launchpad.net/bugs/335496
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
This bug still exists on Hardy. Hardy is LTS so it would be nice if it was
fixed.This change
still remains in the kernel right through to the 2.6.29 kernel. The code has
changed significantly for 2.6.30.
Upstream commit f367bed005b06db7067fc378a5f2253fac54e5d9 reverts the
commit which
This bug is fixed in the git repository, commitid
18ece89a0cbbe3cd4d0fdcece41fc2695db45947
** Changed in: dmraid (Ubuntu)
Status: New = Fix Committed
--
Raid is not activated automatically
https://bugs.launchpad.net/bugs/367553
You received this bug notification because you are a member
Hi,
Sadly it didn't work. On the other hand, I haven't upgraded from RC to
Final. Should I try again after upgrading, or any other ideas?
--
touchpad is not detected in jaunty 9.04
https://bugs.launchpad.net/bugs/359982
You received this bug notification because you are a member of Ubuntu
Yes, this seems to be still issue even as of Kubuntu 9.04 (tested on
AMD64 9.04 Kubuntu) - it's new network manager allows to configure VPNs.
But unfortunately there is no PPTP in list. Only OpenVPN and Cisco VPN
are available out of the box. Users who depend on PPTP to access
Internet (and in my
It runs ok only with root privileges(e.g. if you run it with sudo or
gksudo).
** Changed in: checkbox (Ubuntu)
Status: New = Confirmed
--
Checkbox-gtk doesn't start
https://bugs.launchpad.net/bugs/367609
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Status changed from incomplete due to comment added.
** Changed in: ubuntu
Status: Incomplete = New
--
Kubuntu 8.10 x64 beta: unable to configure PPTP VPN via GUI
https://bugs.launchpad.net/bugs/285710
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Looking at /virtinst/FullVirtGuest.py today and I can't see that centos5
option is still there. In fact, they have changed this upstream into the
file /virtinst/OSDistro.py. In the new file, centos5 does not exist.
Checking the man page at /man/en/virt-install.1 and the centos5 option
is gone.
** Summary changed:
- fusesmb - Not working properly - SIGABORT in getattr() - libsmbclient not
thread safe
+ fusesmb/smbnetfs SIGABORT in getattr() because libsmbclient is not thread safe
--
fusesmb/smbnetfs SIGABORT in getattr() because libsmbclient is not thread safe
Public bug reported:
Binary package hint: evince
When I double click on a word in first column the whole text in second column
is also selected. The same happens when I double click inside the second
column, the first column is also selected. Take in cosideration that I am not
moving the
** Attachment added: I double-clicked on the word not on left column and the
right column was also selected
http://launchpadlibrarian.net/26019627/ScreenshotScreeshot%20of%20behavior.pdf.png
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/26019628/Dependencies.txt
**
Public bug reported:
Binary package hint: freeradius
I'm running the latest stable, Ubuntu 9.04. I installed the package
freeradius and freeradius-mysql, along with its dependencies.
It took me 8 hours to figure out why freeradius was not working! I kept getting
following errors:
Failed
Public bug reported:
Binary package hint: sdr
Description:Ubuntu 9.04
Release:9.04
Package: sdr
Architecture: i386
Version: 3.0-7
stev...@aiko:/tmp$ sdr
*** buffer overflow detected ***: sdr terminated
=== Backtrace: =
** Description changed:
After upgrade Ubuntu Server from 8.10 to 8.04 version I can't login to and
synchronize tasks with Eclipse in Trac projects:
1. login link missing,
2. after write URL to login page i got: No handler matched request to /login
3. trying to reconfigure permission via
With the last update, this problem was fixed!
Log started: 2009-04-27 09:55:01
(Reading database ... 196368 files and directories currently installed.)
Preparing to replace xulrunner-1.9-gnome-support
1.9.0.9+nobinonly-0ubuntu0.8.04.1 (using
This clipboard feature was removed from Glade 3.5.x onwards so is no
longer an issue.
** Changed in: glade-3 (Ubuntu)
Status: Triaged = Fix Released
--
can't remove widgets from clipboard
https://bugs.launchpad.net/bugs/115251
You received this bug notification because you are a member
I am seeing this bug after an update to Jaunty. Is it possible there's
been a regression?
My Send To dialog does not contain Thunderbird any more.
Also, strangely, my Preferred Applications box contains both
Thunderbird and Mozilla Thunderbird.
Some more info:
j...@thunder:~$ dpkg -l
The policy would suggest that GNOME Terminal is not suitable either, since its
-x is xterm's -e, and it doesn't support -T.
We follow GNOME Terminal behaviour in this regard, our -x is xterm's -e and we
do not support -T.
I suppose that means that on the face of it, we should not install the
I can confirm this on a setup with 2 8800gt's.
The mouse wrapping issue just pops up sometimes while moving from card to card.
--
[multi screen] mouse position sometimes wrong
https://bugs.launchpad.net/bugs/363375
You received this bug notification because you are a member of Ubuntu
Bugs, which
Public bug reported:
Hi everyone, I've just upgraded my Acer Aspire One L110 to Jaunty
Jackalope, and now my gnome-power-manager applet reliably crashes when I
unplug the AC power. Running it with --verbose doesn't give any useful
information. I can restart it, and it works also when I reattach
** Description changed:
Binary package hint: update-manager
According to the system I am using more than one update application at once
while I am not
it happens the same if I use aptitude (I am using the latest version of
kubuntu, installed 2 weeks ago...and I am new to linux)
I'm working with linux-backports-modules-jaunty-generic package
installed from the repository.
What is weird is that WICD works when knetworkmanager and the kde4
plasma widgets did not.
--
[iwlagn] networkmanager applet cannot connect to WPA2 home network (intel 4965)
I'm working with linux-backports-modules-jaunty-generic package
installed from the repository.
What is weird is that WICD works without the package when
knetworkmanager and the kde4 plasma widgets did not.
--
[iwlagn] networkmanager applet cannot connect to WPA2 home network (intel 4965)
Can this be reproduced in Ubuntu 9.04 (Jaunty)? I have tried to
reproduce with Glade 3.6.1 in Jaunty and am not seeing a problem.
** Changed in: glade-3 (Ubuntu)
Status: Triaged = Incomplete
--
Glade 3 has rendering problems in menubar added to window
ls -l /dev/nvram says:
crw-r- 1 root kmem 10, 144 2009-04-27 00:46 /dev/nvram
it seems that its group is kmem, that's why I can't read it with my user added
to nvram
for now, I added /usr/bin/tpb to sudoers, so it can be run without a password,
and added
tpb -d to run at session start
--
Public bug reported:
Binary package hint: evince
The last two pages of the attached pdf don't are showed.
But if you choose select all from the menu is possible view some text of the
last two pages.
ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 9.04
ExecutablePath: /usr/bin/evince
** Attachment added: Delibera 621-2.pdf
http://launchpadlibrarian.net/26019793/Delibera%20621-2.pdf
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/26019794/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/26019795/ProcMaps.txt
**
** Description changed:
Hi everyone, I've just upgraded my Acer Aspire One L110 to Jaunty
Jackalope, and now my gnome-power-manager applet reliably crashes when I
unplug the AC power. Running it with --verbose doesn't give any useful
information. I can restart it, and it works also when I
** Changed in: compiz (Ubuntu)
Status: Invalid = New
--
[jaunty] Desktop effects could not be enabled
https://bugs.launchpad.net/bugs/363967
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
** Summary changed:
- gnomedruid and apply button
+ Setting show_finish on GnomeDruid makes it unnavigable in Glade
--
Setting show_finish on GnomeDruid makes it unnavigable in Glade
https://bugs.launchpad.net/bugs/120897
You received this bug notification because you are a member of Ubuntu
Public bug reported:
After upgrade from 8.10 to 9.04 dmesg got spammed with messages:
[258533.482524] EDAC MC0: UE page 0x0, offset 0x0, grain 0, row 3, labels ::
x38 UE
[258533.483835] EDAC MC0: UE page 0x0, offset 0x0, grain 0, row 7, labels ::
x38 UE
But edac-utils shows no errors and
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/26019900/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/26019901/CurrentDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/26019902/Dependencies.txt
**
*** This bug is a duplicate of bug 258603 ***
https://bugs.launchpad.net/bugs/258603
** Tags removed: need-duplicate-check
** Attachment removed: Dependencies.txt
http://launchpadlibrarian.net/26017187/Dependencies.txt
** Attachment removed: ProcMaps.txt
*** This bug is a duplicate of bug 339148 ***
https://bugs.launchpad.net/bugs/339148
** Tags removed: need-duplicate-check
** Attachment removed: Dependencies.txt
http://launchpadlibrarian.net/26016133/Dependencies.txt
** Attachment removed: ProcMaps.txt
*** This bug is a duplicate of bug 292249 ***
https://bugs.launchpad.net/bugs/292249
** Tags removed: need-duplicate-check
** Attachment removed: Dependencies.txt
http://launchpadlibrarian.net/26015516/Dependencies.txt
** Attachment removed: ProcMaps.txt
*** This bug is a duplicate of bug 291287 ***
https://bugs.launchpad.net/bugs/291287
** Tags removed: need-duplicate-check
** Attachment removed: Dependencies.txt
http://launchpadlibrarian.net/26010584/Dependencies.txt
** Attachment removed: ProcMaps.txt
*** This bug is a duplicate of bug 350668 ***
https://bugs.launchpad.net/bugs/350668
** Tags removed: need-duplicate-check
** Attachment removed: Dependencies.txt
http://launchpadlibrarian.net/26004875/Dependencies.txt
** Attachment removed: ProcMaps.txt
*** This bug is a duplicate of bug 350988 ***
https://bugs.launchpad.net/bugs/350988
** Tags removed: need-duplicate-check
** Attachment removed: Dependencies.txt
http://launchpadlibrarian.net/26001350/Dependencies.txt
** Attachment removed: ProcMaps.txt
*** This bug is a duplicate of bug 277678 ***
https://bugs.launchpad.net/bugs/277678
** Tags removed: need-duplicate-check
** Attachment removed: ProcMaps.txt
http://launchpadlibrarian.net/25999134/ProcMaps.txt
** Attachment removed: ProcStatus.txt
your description is confusing, the select video is played but it's also
added to the playlist ... is that your issue there? you want it to be
played but not being added to the playlist? anyway that's an upstream
choice not a bug, if you disagree you should open a bug on
bugzilla.gnome.org directly
*** This bug is a duplicate of bug 260001 ***
https://bugs.launchpad.net/bugs/260001
** Tags removed: need-duplicate-check
** Attachment removed: Dependencies.txt
http://launchpadlibrarian.net/25992187/Dependencies.txt
** Attachment removed: ProcMaps.txt
*** This bug is a duplicate of bug 321395 ***
https://bugs.launchpad.net/bugs/321395
** Tags removed: need-duplicate-check
** Attachment removed: Dependencies.txt
http://launchpadlibrarian.net/25989223/Dependencies.txt
** Attachment removed: ProcMaps.txt
*** This bug is a duplicate of bug 290635 ***
https://bugs.launchpad.net/bugs/290635
** Tags removed: need-duplicate-check
** Attachment removed: Dependencies.txt
http://launchpadlibrarian.net/25987962/Dependencies.txt
** Attachment removed: ProcMaps.txt
*** This bug is a duplicate of bug 289115 ***
https://bugs.launchpad.net/bugs/289115
** Tags removed: need-duplicate-check
** Attachment removed: Dependencies.txt
http://launchpadlibrarian.net/25986575/Dependencies.txt
** Attachment removed: ProcMaps.txt
According to:
https://answers.launchpad.net/ubuntu/+question/68456
disabling visual effects solves the problem.
I guess my graphical card is not as good enough as to suppport compiz,
so gnome default, metacity, is the right choice.
Anyway it seems other users still have the problem even
Please, update status according to my latest comments regarding default
window manager selection.
** Package changed: ubuntu = compiz (Ubuntu)
** Changed in: compiz (Ubuntu)
Status: New = Incomplete
--
Screen flickering with Firefox full screen
https://bugs.launchpad.net/bugs/366017
** Also affects: java-common (Ubuntu)
Importance: Undecided
Status: New
--
MythTV Frontend does not work with RADEON DRI
https://bugs.launchpad.net/bugs/341898
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Summary changed:
- Vinagre F11 fullscreen toggle not responding
+ Improvements for enabling keyboard shortcuts
--
Improvements for enabling keyboard shortcuts
https://bugs.launchpad.net/bugs/353859
You received this bug notification because you are a member of Ubuntu
Bugs, which is
If you turn off smooth-scrolling, this problem does not happen.
--
pidgin doesn't keep scrolling in irc chat
https://bugs.launchpad.net/bugs/329248
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Yes thanks again.I thought this problem may have happened when i
upgraded on the internet.Should have used the upgraded disc.If i do
upgrade to 9.04,should i upgrade from the internet,or get the disc,and
do u think it may fix my prob.?As u say ,it may be a system prob.all
though i have prob. with
Hi Stefan,
I would like to test this on our ESX setup as we often see the
'Clocksource tsc unstable' warnings on these machines. Do you have a
test case to reliably repeat the issue? We get the warning sporadically
without any obvious pattern which makes testing the -proposed packages a
little
** Summary changed:
- [wishlist] vinagre should offer a listen mode
+ Add listen mode
--
Add listen mode
https://bugs.launchpad.net/bugs/299970
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Sent upstream:
http://bugzilla.gnome.org/show_bug.cgi?id=580387
** Summary changed:
- Enh: panning while in fullscreen
+ Make fullscreen pan if remote display has higher resolution
** Bug watch added: GNOME Bug Tracker #580387
http://bugzilla.gnome.org/show_bug.cgi?id=580387
** Also
101 - 200 of 3704 matches
Mail list logo
