I get the same behaviour than Chris in #188 but installing linux-
image-2.6.31-10-generic_2.6.31-10.30~lp389040oga1_i386.deb in Karmic.
1) playback through internal speakers: OK
2) speakers mute when headphones plugged in (and sound is heard through
headphones): OK
3) recording through the
Hi Martin,
Using linux-image-2.6.28-15-generic from jaunty-proposed repository
wired net connection works properly.
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c
Gigabit Ethernet Adapter (rev c0)
Subsystem: ASUSTeK Computer Inc. Device 838a
Flags:
Hi Leann, Chris,
I've tried with karmic installing linux-image-2.6.31-9-generic package
with these results:
usua...@nb200:~$ cat /proc/version_signature
Ubuntu 2.6.31-9.29-generic
1) playback through internal speakers: Not OK
2) speakers mute when headphones plugged in (and sound is heard
We have the same results as Chris has:
With Ubuntu 2.6.28-15.50~lp389040oga3-generic
1) playback through internal speakers: OK
2) speakers mute when headphones plugged in (and sound is heard through
headphones): OK
3) recording through the internal mic: Not working
4) recording through an
Hi Leann, good news, sound recording is working with your new path.
usua...@nb200-10z:~$ cat /proc/version_signature
Ubuntu 2.6.28-15.50~lp389040oga2-generic
You have to speak louder near the mic but everything is working, play
and recording.
Thank you so much!
--
Realtek ALC272 not working
Hi Leann,
thank you very much for your kernel packages. We spend a lot of time
compiling to apply patches.
Using linux-image-2.6.28-15-generic_2.6.28-15.51~lp389040oga1_i386.deb
over a Jaunty fresh install:
- Sounds works through speakers
- When plug headphones, speakers mute properly and
Of course,
Nic is supported with this kernel too.
r...@eeepc-1005ha:~# uname -a
Linux eeepc-1005HA 2.6.28-15-generic #51~lp415358oga1 SMP Fri Aug 21 21:51:14
UTC 2009 i686 GNU/Linux
r...@eeepc-1005ha:~# ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link
After installing linux-backports-
modules-2.6.28-15-generic_2.6.28-15.18~lp415358oga1_i386.deb and
rebooting the nic is recognized
r...@eeepc-1005ha:~# dmesg | grep eth0
[ 21.844589] atl1c :01:00.0: atl1c: eth0 NIC Link is Up100 Mbps Full
Duplex
[ 32.784056] eth0: no IPv6 routers present
Leann, sound is working properly with linux-
image-2.6.28-15-generic_2.6.28-15.50~lp389040oga1_i386.deb installed.
Now we are going to try again with karmic kernel disabling KMS.
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received
Hi Leann,
Atheros AR8132 works fine with Karmic Alpha 4 using atl1c module.
Manufacturer has another version more recent of this driver:
http://partner.atheros.com/Drivers.aspx
--
Atheros AR8132 / L1c Gigabit Ethernet Adapter no detected in 9.04
https://bugs.launchpad.net/bugs/415358
You
Leann, installing linux-
image-2.6.31-6-generic_2.6.31-6.25~lp389040oga1_i386.deb in Karmic Alpha
4 sound works fine through speakers.
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug notification because you are a
Leann, with linux-
image-2.6.31-6-generic_2.6.31-6.25~lp389040oga1_i386.deb installed the
netbook doesn't start graphical environment and computer freezes so we
can't test sound.
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received
Public bug reported:
Hardware: Asus eeePC 1005HA
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c
Gigabit Ethernet Adapter (rev c0)
Subsystem: ASUSTeK Computer Inc. Device 838a
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at
** Attachment added: dmesg.log
http://launchpadlibrarian.net/30459552/dmesg.log
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/30459553/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/30459554/CurrentDmesg.txt
** Attachment added:
We've tested the kernel in Jaunty. We need to use a stable version in
these machines.
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Hi Leann,
We have try to adapt first patch to jaunty alsa sources (because doesn't
apply directly) and compile it, but we don't get sound working after
that.
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug
I've found a dirty fix to make sound available again:
You have to obtain kernel source and remove or comment line 17138 and
recompile it:
alsa-kernel/pci/hda/patch-realtek.c:17138,
{ .id = 0x10ec0272, .name = ALC272, .patch = patch_alc662 }
More info:
The same problem with NB200 running Karmic Koala current build 20090812.
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Description changed:
- Hardware: Toshiba NB200 notebook, same as Toshiba Dynabook UX
+ Hardware: Toshiba NB200 netbook (EU), same as Toshiba NB205 (USA) and
+ Toshiba Dynabook UX (JP)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
** Changed in: sane-backends (Guadalinex Edu)
Status: Confirmed = Won't Fix
--
HP Scanjet 2400 does not work with ubuntu
https://bugs.launchpad.net/bugs/194748
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Changed in: linux (Ubuntu)
Status: Incomplete = Confirmed
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
I remember one guy from Canonical with a Dynabook UX or NB200 in the
last UDS at Barcelona. I'll try to contact with them.
Thanks Tao.
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug notification because you are a
** Description changed:
- Hardware: Toshiba NB200 notebook
+ Hardware: Toshiba NB200 notebook, same as Toshiba Dynabook UX
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
Subsystem: Toshiba America Info Systems Device ff6e
AplayDevices:
Lista de PLAYBACK Dispositivos Hardware
tarjeta 0: Intel [HDA Intel], dispositivo 0: ALC272 Analog [ALC272 Analog]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
Architecture: i386
ArecordDevices:
Lista de CAPTURE Dispositivos Hardware
tarjeta 0:
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/28221230/BootDmesg.txt
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/28221233/CurrentDmesg.txt
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: PciMultimedia.txt
http://launchpadlibrarian.net/28221236/PciMultimedia.txt
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: Card0.Codecs.codec.0.txt
http://launchpadlibrarian.net/28221232/Card0.Codecs.codec.0.txt
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug notification because you are a member of Ubuntu
Bugs,
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/28221234/Dependencies.txt
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/28221225/AlsaDevices.txt
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
** Attachment added: Card0.Amixer.values.txt
http://launchpadlibrarian.net/28221231/Card0.Amixer.values.txt
--
Realtek ALC272 not working in 9.04 but its working under 8.10
https://bugs.launchpad.net/bugs/389040
You received this bug notification because you are a member of Ubuntu
Bugs,
** Description changed:
Hardware: Toshiba NB200 notebook
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
Subsystem: Toshiba America Info Systems Device ff6e
Flags: bus master, fast devsel, latency 0, IRQ 22
Public bug reported:
Hardware: Toshiba NB200 notebook
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
Subsystem: Toshiba America Info Systems Device ff6e
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at
** Changed in: gnome-app-install (Guadalinex Edu)
Importance: Undecided = Low
** Changed in: gnome-app-install (Guadalinex Edu)
Status: Incomplete = Confirmed
--
Filezilla Cannot be installed on your computer type
https://bugs.launchpad.net/bugs/355114
You received this bug
Still having the same error in another Jaunty fresh install and
upgraded.
** Changed in: gnome-app-install (Ubuntu)
Status: New = Confirmed
--
Filezilla Cannot be installed on your computer type
https://bugs.launchpad.net/bugs/355114
You received this bug notification because you are a
This behaviour is confirmed in GuadalinexEdu when you are working with a
Circuit but there is no problem when you work with a FlowCode.
** Changed in: ktechlab (Guadalinex Edu)
Importance: Undecided = Medium
** Changed in: ktechlab (Guadalinex Edu)
Status: New = Confirmed
--
crash
This bug is solved upstream, I've just test ktechlab_0.3.7-2_i386.deb
package from debian sid and it's possible to add any component to a
circuit.
--
crash when selecting a component (happened at least 5 times with differnet
compounts)
https://bugs.launchpad.net/bugs/115416
You received this
This still happens under Jaunty 9.04
** Changed in: gcompris (Ubuntu)
Status: New = Confirmed
--
Administration not available
https://bugs.launchpad.net/bugs/371603
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
This behavior is confirmed under Guadalinex Edu distribution too.
** Also affects: tkgate (Guadalinex Edu)
Importance: Undecided
Status: New
** Changed in: tkgate (Guadalinex Edu)
Status: New = Confirmed
--
Error when tkgate starts simulator
** Also affects: kdeedu (Guadalinex Edu)
Importance: Undecided
Status: New
--
parley scripts fail to load
https://bugs.launchpad.net/bugs/371565
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
Binary package hint: step
Trying to use a spring in the Phisics interactive simulator Step the
application crashed with SIGSEGV.
** Affects: kdeedu (Ubuntu)
Importance: Undecided
Status: New
** Affects: kdeedu (Guadalinex Edu)
Importance: Undecided
** Attachment added: step_frezees.png
http://launchpadlibrarian.net/26168486/step_frezees.png
** Also affects: kdeedu (Guadalinex Edu)
Importance: Undecided
Status: New
--
step crashed with SIGSEGV
https://bugs.launchpad.net/bugs/369679
You received this bug notification because
HP recommends us follow this steps in order to support this scanner
The HP driver contains calls to libsane.so. Unfortunately, libsane.so
lacks the sanei_usb module.
To add this module,
1) Obtain the SANE distribution from www.sane-project.org.
2) add sanei_usb.lo to the EXTRA line in
** Also affects: sane-backends (Guadalinex Edu)
Importance: Undecided
Status: New
--
HP Scanjet 2400 does not work with ubuntu
https://bugs.launchpad.net/bugs/194748
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
*** This bug is a duplicate of bug 355114 ***
https://bugs.launchpad.net/bugs/355114
** This bug has been marked a duplicate of bug 355144
translation bugs
** This bug is no longer a duplicate of bug 355144
translation bugs
** This bug has been marked a duplicate of bug 355114
Comprobamos que el lanzamiento de kompozer_0.7.10-0ubuntu5_i386.deb ha
resuelto el error.
** Changed in: kompozer (Guadalinex Edu)
Status: Confirmed = Fix Released
--
Buffer overflow in kompozer-bin (crash at startup in jaunty)
https://bugs.launchpad.net/bugs/347779
You received this bug
I can install Filezilla in 9.04 RC without any message.
Please try to reproduce this issue.
** Also affects: gnome-app-install (Guadalinex Edu)
Importance: Undecided
Status: New
** Changed in: gnome-app-install (Guadalinex Edu)
Status: New = Incomplete
--
Filezilla Cannot be
If this bug persist in Jaunty Final Release we need to include by
default in Guadalinex Edu another WYSIWYG HTML Editor.
** Also affects: kompozer (Guadalinex Edu)
Importance: Undecided
Status: New
** Changed in: kompozer (Guadalinex Edu)
Importance: Undecided = High
** Changed in:
I've just done a dist-upgrade in Jaunty and now I can't reproduce this
issue.
I think this issue is solved now.
--
WARNING: at /build/buildd/linux-2.6.28/arch/x86/kernel/setup.c:719
check_for_bios_corruption+0xdd/0xe0()
https://bugs.launchpad.net/bugs/350704
You received this bug notification
We can't reproduce this issue with latest package upgrade.
** Changed in: linux (Guadalinex Edu)
Status: Confirmed = Fix Released
--
WARNING: at /build/buildd/linux-2.6.28/arch/x86/kernel/setup.c:719
check_for_bios_corruption+0xdd/0xe0()
https://bugs.launchpad.net/bugs/350704
You
Is this reproducible?
Yes
If so, what specific steps should we take to recreate this bug?
1. Start system
2. Suspend system
3. Restore system
4. Enter your user password
5. Kernel Failure windows popup show next message:
Kernel failure message 1:
[ cut here ]
WARNING:
** Changed in: linux (Guadalinex Edu)
Importance: Undecided = Low
** Changed in: linux (Guadalinex Edu)
Status: New = Confirmed
--
WARNING: at /build/buildd/linux-2.6.28/arch/x86/kernel/setup.c:719
check_for_bios_corruption+0xdd/0xe0()
https://bugs.launchpad.net/bugs/350704
You
This also affects me but under i386 architecture.
** Also affects: linux (Guadalinex Edu)
Importance: Undecided
Status: New
--
WARNING: at /build/buildd/linux-2.6.28/arch/x86/kernel/setup.c:719
check_for_bios_corruption+0xdd/0xe0()
https://bugs.launchpad.net/bugs/350704
You received
I have the same issue under Jaunty.
Dasher doesn't start to move. I have tried with visual effects on and
off.
In my case dasher doesn't crash but no work.
--
Dasher just doesn't work at all
https://bugs.launchpad.net/bugs/244828
You received this bug notification because you are a member of
Here is the output that you can see allways in a bucle when you runs
strace dasher until you exit.
gettimeofday({1239040687, 479844}, {0, 0}) = 0
select(4, [3], [3], NULL, NULL) = 1 (out [3])
writev(3, [{\7\7\0...@\3j\0@\3\...@\3\0\0\0\0\0\0\0\0\214\1a\1..., 28},
{NULL, 0}, {..., 0}], 3)
Public bug reported:
Binary package hint: xchat-gnome
When I try to start Xchat from Applications Internet menu Xchat
doesn't start.
I'm using Ubuntu Jaunty Alpha 6
anto...@gauss:~$ lsb_release -rd
Description:Ubuntu jaunty (development branch)
Release:9.04
The last lines of
I had the same issue (vertical scroll didn't work by defeult) with Dell
Latitude E5400 and now (after upgrade) works fine.
r...@guadalinex:~# dmesg | grep input
[1.336653] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[1.338532] input: Power Button (CM) as
We have at the Andalusian ITC School Project more than 300 HP Lasejet
1020 and get this job automated for pupils and teachers its very
important.
Weiers Coetser steps works properly for us too.
--
[Feisty] MASTER: HP LaserJet 1000/1005/1018/1020 don't work because of missing
firmware
101 - 158 of 158 matches
Mail list logo