[Bug 1885310] [NEW] Unable to add local printer. cups hanging

Public bug reported: Initially added epson c60 stylus but it installed with filter error. Deleted printer from cups , added new printer. Added the epson printer , selected the .ppd file that worked in 1904 and clicked add printer. Cups just sits and thinks. Same happens if I use the

[Bug 1848900] Re: [amdgpu] Blank display with Eoan Ermine live DVD on Ryzen 3 2200G

The bug seems to have "gone away" when using a DVD of an early March beta version of Focal Fossa 20.04. It boots very happily with no obvious display problems. Sorry that I could not track down exactly what the problem was. -- You received this bug notification because you are a member of

[Bug 1848900] Re: [amdgpu] Blank display with Eoan Ermine live DVD on Ryzen 3 2200G

I'm not so sure that it is a kernel problem. Bionic with the edge kernel 5.3.0-24 seems OK, although it has locked up once or twice. Eoan with kernel 5.3.0-23 misbehaves. Could the XFCE desktop be important? -- You received this bug notification because you are a member of Ubuntu Bugs, which

[Bug 1848900] Re: [amdgpu] Blank display with Eoan Ermine live DVD on Ryzen 3 2200G

Correction: Rc7 sometimes boots in the standard way. Sometimes it goes to a black screen. Rc7 boots reliably from the *recovery* mode in the grub menu. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1848900] Re: [amdgpu] Blank display with Eoan Ermine live DVD on Ryzen 3 2200G

@Morten I think that all Ryzen motherboards are going to have UEFI firmware rather than the old BIOS firmware - even though everyone keeps using the old name. If it is your computer and you know what you are doing you could turn off secure boot. If you don't know, then don't do it. I grabbed

[Bug 1848900] Re: [amdgpu] Blank display with Eoan Ermine live DVD on Ryzen 3 2200G

Workarounds include; use an older version of Ubuntu, use a faster monitor, use a video card (nVidia GT 710), use a mainline kernel 5.4.0-050400rc6-generic which also reports the VGA port as a VGA port. But using a mainline kernel and a video card xrandr reports a 77 Hz refresh rate

[Bug 1850728] Re: CPU mis identified, need to force workaround

My guess is that .../drivers/media/pci/cx23885/cx23885-core.c is important and maybe my IOMMU, but I don't feel competent to patch the code myself. Nor am I certain that "15d1" is the magic number for Raven Ridge APUs. psd@myth:~$ lspci -s 0:00.2 00:00.2 IOMMU: Advanced Micro Devices, Inc.

[Bug 1850746] Re: mythtv-backend-setup fails to add user to group mythtv under XFCE

Thanks for the `man apt-get`. I thought that the file /usr/share/mythtv/mythtv-setup.sh was an Ubuntu wrapper and therefore any reliance on something removed from Ubuntu was "a bit silly". That file is actually part of Mythtv, so it is an upstream thing. It has had a major rewrite months

[Bug 1850746] Re: mythtv-backend-setup fails to add user to group mythtv under XFCE

Sorry if I got a bit excited. On a fresh install of Xubuntu, Mythtv backend setup does not work. If it worked, then when it was first run it would add the user to the group "mythtv", something that requires root access. My guess is that long ago a pop up box would prompt the user for their

[Bug 1850746] Re: mythtv-backend-setup fails to add user to group mythtv under XFCE

Some of the call to gksu are in /usr/share/mythtv/dialogue_functions.sh along with a warning that you need gksu or kdesu to run mythtv-frontend. Kdesu seems inappropriate, since I am not running KDE, also apt-get fails to install it (kdesu). -- You received this bug notification because you

[Bug 1850746] Re: mythtv-backend-setup fails to add user to group mythtv under XFCE

Mythtv does not work because it calls gksu (and other reasons). Running Mythtv backend setup does nothing. The fix will include replacing calls to gksu with something modern, perhaps pkexec. I will leave that to the programmers. Grepping the source code for depreciated functions is probably a

[Bug 1850746] Re: mythtv-backend-setup fails to add user to group mythtv under XFCE

Maybe it is XFCE that is setting $SU_TYPE to a depreciated function, but then lots of things would be broken not just Mythtv. I have not found the file to be patched. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1850746] [NEW] mythtv-backend-setup fails to add user to group mythtv under XFCE

Public bug reported: Running Mythtv-backend-setup from the XFCE menu looks like it is adding the user to the group "mythtv", but does not. The user has to add himself manually, either by editing /etc/groups or with adduser `whoami` mythtv. The meta package is mythtv. The package is

[Bug 1850728] [NEW] CPU mis identified, need to force workaround

Public bug reported: This is probably an upstream bug, but this looks like the first pont of contact. I have a TV tuner card that works with old CPUs but fails with new CPUs that are "too fast". This is a known problem and there is a workaround for it. The workaround is automatically applied

[Bug 1848900] [NEW] blank display with Eoan Ermine live DVD on Rysen 2200G

Public bug reported: Regression with Ryzen 3 2200G, UEFI Asrock B450 Pro4 motherboard and 55-75 Hz monitor. Booting Xubuntu 19.10 live iso with safe graphics options did give a stable desktop display, but xubuntu@xubuntu:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0:

[Bug 1726866] Re: package linux-image-extra-4.4.0-96-generic 4.4.0-96.119 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/zz-runlilo exited with return code 1

After recreating links in "/" to images in /boot (which I had removed earlier) lilo ran without complaint. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1726866 Title: package

[Bug 1726866] [NEW] package linux-image-extra-4.4.0-96-generic 4.4.0-96.119 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/zz-runlilo exited with return code 1

Public bug reported: Why on earth do the post removal scrips generate initrd images that are going to be REMOVED? Anyway, "sudo apt-get remove linux-image- extra-4.4.0-96-generic" failed, don't know why, it should not have been called in the first place. ProblemType: Package DistroRelease:

[Bug 1629625] [NEW] boinc does not recognize valid CUDA GPU, nvidia GT 710

Public bug reported: According to my GPU supports CUDA, but the log from BOINC says that no GPU was found. It used to work for me when I had an nVidia GT 610. nVidia's web pages are a little inconstant, and the GT 710

[Bug 1603272] [NEW] package linux-image-3.13.0-92-generic 3.13.0-92.139 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/zz-runlilo exited with return code 1

Public bug reported: The only Ubuntu error here is that the real error message from LiLo was hidden in a large number of information messages. After "sudo apt-get update" and "sudo apt-get dist-upgrade" a large number of packages were installed. Possibly there was an error from LiLo in the mist

[Bug 1550839] Re: wakealarm is cleared on boot unless hpet disabled

First, I am surprised and pleased that ASRock is still issuing firmware updates for such an old motherboard. There was an update issued weeks before I opened this bug report. Firmware updated from 2.50 to 2.60. The stated fix in the firmware update has nothing to do with this bug - but the

[Bug 1550846] Re: package identification is awful

Why is this still "incomplete"? What more needs to be added? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1550846 Title: package identification is awful To manage notifications about this bug go

[Bug 1544809] Re: kernel security update fails if a 2nd Ubuntu on same machine

I have done "apport-collect 1544809" more than once, and the bug report is still marked as "incomplete", not that my logs should be particularly relevant to boot loader design. Changing to "confirmed". ** Changed in: grub2 (Ubuntu) Status: Incomplete => Confirmed -- You received this

[Bug 1544809] ProcEnviron.txt

apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1544809/+attachment/4590022/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1544809

[Bug 1544809] Re: kernel security update fails if a 2nd Ubuntu on same machine

apport information ** Description changed: There is a security issue when multiple instances of Ubuntu (or other distributions) are installed on the same hardware. In my case I have 14.04 LTS and 16.04 alpha (plus some others). After installing 14.04 LTS as the main system on an UEFI

[Bug 1550846] Re: package identification is awful

I've just booted a few different releases. A live pre-release DVD of Mythbuntu from a few day ago does behave with "ubuntu-bug linux" and "ubuntu-bug apport" although it could have done better with; "ubuntu-bug kernel", "ubuntu-bug ubuntu-bug", "ubuntu-bug ubuntu", and "ubuntu-bug apport-bug".

[Bug 1544809] ProcEnviron.txt

apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1544809/+attachment/4583090/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1544809

[Bug 1544809] Re: kernel security update fails if a 2nd Ubuntu on same machine

apport information ** Tags added: apport-collected xenial ** Description changed: There is a security issue when multiple instances of Ubuntu (or other distributions) are installed on the same hardware. In my case I have 14.04 LTS and 16.04 alpha (plus some others). After installing

[Bug 1550846] [NEW] package identification is awful

Public bug reported: Recently I reported a bug against the kernel - apport made this very difficult. The instructions at clearly state that the correct thing to do is to report kernel bugs against the package "linux". That does not work.

[Bug 1550839] [NEW] wakealarm is cleared on boot unless hpet disabled

Public bug reported: Wiley Werewolf 15.10 and Xenial Xerus 16.04 (alpha) clear /sys/class/rtc/rtc0/wakealarm during the bootup process, unless "hpet=disable" is given as a boot parameter. (Tested on Xenia, not tested on Wiley.) Trusty Tahr 14.04 is well behaved, without the hpet parameter.

[Bug 1481158] Re: sfdisk gets cylinder calculation wrong when using sectors

I suspect that this causes a problem that later versions do not clean up. In this case the sequences was (probably) partition with Trusty, install Trusty, delete Trusty, , install Wily (without re- partitioning). The current partition table as displayed by fdisk on Trusty is clearly wrong

[Bug 1544809] Re: kernel security update fails if a 2nd Ubuntu on same machine

On re-reading, I should open another bug report on apport and mark that one confirmed. It will have to wait a few days. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1544809 Title: kernel security

[Bug 1544809] Re: kernel security update fails if a 2nd Ubuntu on same machine

Sorry for the duplication, but I will attach another copy of the same file. *There is a change! * Spaces have been changed to "not a word" characters "\W" in a grep pattern. And I can now see what to click to add an attachment. Did I miss that, or does it just not exist during bug report

[Bug 1544809] Re: kernel security update fails if a 2nd Ubuntu on same machine

** Attachment added: "modification to make grub2 "take back" EFI control" https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1544809/+attachment/4569784/+files/zz-update-grub -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1541178] [NEW] multiple installations forget which grub.cfg to read on efi

Public bug reported: When multiple copies of Ubuntu are installed on the one machine there are multiple copies of /boot/grub/grub.cfg. In my case there is one for 14.04 LTS (on partition 5) and one for a pre-release version of 16.04 (on partition 11), plus some others. During installation on an

[Bug 1495019] [NEW] Wily with xfce update does not shutdown cleanly

Public bug reported: Wily Werewolf beta1 with various updates, including xubuntu-dev/xubuntu- staging/ubuntu wily main, does not shutdown my hardware cleanly. It needs to have the power button pressed. It is an old BIOS firmware machine with an AMD cpu. ** Affects: software-center (Ubuntu)

[Bug 1400021] Re: boinc-nvidia-cuda does not install nvidia-modprobe

I'm not game to play with my main LTS system, but on my Vivid Vervet test partition tab completion gave, systemctl restart boinc-client.service, which did not do anything obvious. BUT after installing 352 from https://launchpad.net/~mamarley/+archive/ubuntu/nvidia the drop down menu showed

[Bug 1400021] Re: boinc-nvidia-cuda does not install nvidia-modprobe

Sorry, I have not done this very thoroughly. When I installed Mythbuntu (14.04 LTS) some time ago I had to install a couple of non-obvious things to get boinc to use cuda and to display some pretty graphics. Recently I did a test install of Vivid Vervet and started boincmgr to see what would

[Bug 1400021] Re: boinc-nvidia-cuda does not install nvidia-modprobe

Also need at least one of; sudo apt-get install python-pycuda, and sudo apt-get install python3-pycuda, maybe both. I'm not sure. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1400021 Title:

[Bug 1400021] Re: boinc-nvidia-cuda does not install nvidia-modprobe

Sorry, typo. There was an i missing. The work around is, sudo apt- get install nvidia-modprobe, and it is still necessary on Vivid Vervet. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1400021

[Bug 1429745] [NEW] gkrellmoon format of popup text could be improved

Public bug reported: Feature request rather than bug report. The legability of the pop up text when the mouse rolls over the gkrellmoon plugin of gkrellm could be improved by tabulating the rise and set times. As a second best option right alligning those three lines (Yesterday, Today, and

[Bug 1400021] Re: boinc-nvidia-cuda does not install nvidia-modprobe

Agreed, it is not a boinc bug, but isn't the point of a meta package to make-it-work for ordinary users who don't really know what is going on? I think that you have done the right thing. Thank you. -- You received this bug notification because you are a member of Ubuntu Bugs, which is

[Bug 1400021] [NEW] boinc-nvidia-cuda does not install nvidia-modprobe

Public bug reported: On 14.04, 14.10, and possibly other versions, BOINC does not work with CUDA out of the box. One of the reasons is that the meta package boinc-nvidia-cuda does not install nvidia-modprobe, a necessary package. The work around is, sudo apt-get install nvida-modprobe and

[Bug 1081307] Re: virtualbox-dkms 4.1.12-dfsg-2ubuntu0.2: virtualbox kernel module failed to build [merge request]

Has this really been fixed? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1081307 Title: virtualbox-dkms 4.1.12-dfsg-2ubuntu0.2: virtualbox kernel module failed to build [merge request] To

[Bug 1363551] Re: package linux-image-3.8.0-42-generic 3.8.0-42.62~precise1 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/zz-runlilo exited with return code 1

Is there any plan to release this bug fix to the currently supported releases, or just future releases? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1363551 Title: package

[Bug 1387417] [NEW] virtualbox-dkms 4.1.12-dfsg-2ubuntu0.6: virtualbox kernel module failed to build

Public bug reported: This looks like a recurrence of an old bug that has been marked fix released, but I guess that the fix was not complete. The bug dialogue popped up when the kernel was upgraded. ProblemType: Package DistroRelease: Ubuntu 12.04 Package: virtualbox-dkms 4.1.12-dfsg-2ubuntu0.6

[Bug 1019628] Re: virtualbox-dkms 4.1.12-dfsg-2ubuntu0.1: virtualbox kernel module failed to build [Fehler: ungültige Präprozessordirektive #Oefine]

kernel update to 3.13.0-37, looks like the same bug -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1019628 Title: virtualbox-dkms 4.1.12-dfsg-2ubuntu0.1: virtualbox kernel module failed to build

[Bug 1363551] [NEW] package linux-image-3.8.0-42-generic 3.8.0-42.62~precise1 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/zz-runlilo exited with return code 1

Public bug reported: kernel upgrade complains about non standard boot sequence. I does not seem to be a major problem. (I might change my mind after a reboot.) Grub2 is configured to write to the root partition, that seems to work. Lilo is installed, but lilo.conf is deliberately hidden so

[Bug 1356776] [NEW] virtualbox-dkms 4.1.12-dfsg-2ubuntu0.6: virtualbox kernel module failed to build

Public bug reported: Updated 12.04 LTS, security updates first and got an error message. The box has been up for a few days unattended and had downloaded the deb file. ProblemType: Package DistroRelease: Ubuntu 12.04 Package: virtualbox-dkms 4.1.12-dfsg-2ubuntu0.6 ProcVersionSignature: Ubuntu

[Bug 1356800] [NEW] virtualbox-dkms 4.1.12-dfsg-2ubuntu0.6: virtualbox kernel module failed to build

*** This bug is a duplicate of bug 1356776 *** https://bugs.launchpad.net/bugs/1356776 Public bug reported: I thought that I reported this problem just a few minutes ago. Anyway... After leaving Mythbuntu 12.04 alone for a few days I started the previously downloaded updates, starting with

[Bug 1019628] Re: virtualbox-dkms 4.1.12-dfsg-2ubuntu0.1: virtualbox kernel module failed to build [Fehler: ungültige Präprozessordirektive #Oefine]

12.04.5 LTS kernel 3.13.0-34, virtualbox 4.1.12-dfsg-2ubuntu0.6, I guess it is the same bug. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1019628 Title: virtualbox-dkms 4.1.12-dfsg-2ubuntu0.1:

[Bug 1349117] [NEW] virtualbox-dkms 4.1.12-dfsg-2ubuntu0.6: virtualbox kernel module failed to build

*** This bug is a duplicate of bug 1349016 *** https://bugs.launchpad.net/bugs/1349016 Public bug reported: Attempting to update 12.04.4 to 12.04.5 in Mythbuntu ProblemType: Package DistroRelease: Ubuntu 12.04 Package: virtualbox-dkms 4.1.12-dfsg-2ubuntu0.6 ProcVersionSignature: Ubuntu

[Bug 1245467] [NEW] package initramfs-tools 0.99ubuntu13.3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

Public bug reported: I was attempting to install an encryption package for claws-mail. I suspect that the installer tripped over a leftover error from a previous run. Lilo is installed, but there is no configuration file in the standard place (deliberately). ProblemType: Package DistroRelease:

[Bug 1242983] [NEW] package linux-image-3.8.0-32-generic 3.8.0-32.47~precise1 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/zz-elilo exited with return code 1

Public bug reported: A crontab line is; 35 8* * * rootapt-get update; apt-get -yd dist-upgrade to download updates during the off-peak time. I then ran Update Manager later in the morning. ProblemType: Package DistroRelease: Ubuntu 12.04 Package: linux-image-3.8.0-32-generic

[Bug 1233432] [NEW] session-startup-script not passed any environment

Public bug reported: In raring, lightdm successfully passed environment variables (specifically $USER and $HOME) relating to the user logging in to a session-startup-script specified in /etc/lightdm/lightdm.conf. In saucy, the session-startup-script gets a very cut down environment, with $HOME =

Re: [Mythbuntu-bugs] [Bug 1101395] Re: mythlogserver crashed with SIGSEGV in QObject::disconnect()

? (currently, those only exist in the Mythbuntu repo). You'll see from this commit that it's literally impossible for mythlogserver to crash anymore https://github.com/MythTV/packaging/commit/b2571edc639c8d99262dfd4ea222ec920d8a2451 Thanks, Thomas Mashos On Sun, Sep 15, 2013 at 3:46 PM, Peter

[Bug 1101395] Re: mythlogserver crashed with SIGSEGV in QObject::disconnect()

Bug still exists 16th September. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1101395 Title: mythlogserver crashed with SIGSEGV in QObject::disconnect() To manage notifications about this bug go

[Bug 559712] [NEW] does not terminate at computer shutdown

Public bug reported: Binary package hint: mythtv Installed beta, played with it for a short while, installed updates, rebooted as instructed, error message appeared. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: mythtv-backend 0.23.0+fixes23820-0ubuntu1 ProcVersionSignature: Ubuntu

[Bug 559712] Re: does not terminate at computer shutdown

** Attachment added: .var.log.mythtv.mythbackend.log.txt http://launchpadlibrarian.net/43614358/.var.log.mythtv.mythbackend.log.txt ** Attachment added: .var.log.mythtv.mythfrontend.log.txt http://launchpadlibrarian.net/43614359/.var.log.mythtv.mythfrontend.log.txt ** Attachment added:

[Bug 559716] Re: does not terminate at computer shutdown

** Attachment added: Dependencies.txt http://launchpadlibrarian.net/43616267/Dependencies.txt ** Attachment added: InitctlList.txt http://launchpadlibrarian.net/43616268/InitctlList.txt ** Attachment added: ProcAttrCurrent.gz http://launchpadlibrarian.net/43616269/ProcAttrCurrent.gz

[Bug 559716] [NEW] does not terminate at computer shutdown

Public bug reported: Binary package hint: dash installed mythbuntu beta, played arround, installed updates, rebooted as requested, error poped up. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: dash 0.5.5.1-3ubuntu2 ProcVersionSignature: Ubuntu 2.6.32-19.28-generic 2.6.32.10+drm33.1

Re: [Bug 519893] Re: Unable to add files when trying to create video dvd. The program oads for ever

On Thu, 2010-02-11 at 17:42 +, Pedro Villavicencio wrote: brasero --debug --brasero-media-debug brasero-debug.txt Hi Pedro managed to get brasero-g debug.txt to work Once the file selected is added the log stays quiet. Regards Peter -- Unable to add files when trying to create video

[Bug 519893] Re: Unable to add files when trying to create video dvd. The program oads for ever

** Attachment added: debug.txt http://launchpadlibrarian.net/39194013/debug.txt -- Unable to add files when trying to create video dvd. The program oads for ever https://bugs.launchpad.net/bugs/519893 You received this bug notification because you are a member of Ubuntu Bugs, which is

[Bug 519893] [NEW] Unable to add files when trying to create video dvd. The program oads for ever

Public bug reported: Binary package hint: brasero Brasero 2.28.2while trying to create a video dvd the program just indicates that it is loading a file that is added to the list for writing. The file never actually loads, so unable to continue. Linux phuzamoya 2.6.31-14-generic #48-Ubuntu

[Bug 519893] Re: Unable to add files when trying to create video dvd. The program oads for ever

** Attachment added: Dependencies.txt http://launchpadlibrarian.net/39014612/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/39014613/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/39014614/ProcStatus.txt ** Attachment

Re: [Bug 24946] Re: Detected scanner fails to load with Invalid Argument

Hi Stephen Many thanks for the email. I did copy the correct file over from my win 2000 system and you probably missed that sane worked once and the scanner scanned and I was happy. However after a reboot it has never worked again. I have almost forgotten about it. I'll have another go and let

[Bug 24946] Re: Detected scanner fails to load with Invalid Argument

I have ubuntu 6.06 and an acer scanner. I have all the errors as described. When I setup snapscan.conf for the first time, xsane worked and I scanned an immage. After a reboot I have the libusb error message. Driver manager sees the scanner. As user no device . I see in man sane-usb it says as