https://bugzilla.kernel.org/show_bug.cgi?id=100171
This looks like the same thing upstream.
** Bug watch added: Linux Kernel Bug Tracker #100171
http://bugzilla.kernel.org/show_bug.cgi?id=100171
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Tested and added the tags. The bug still exists in 4.4-rc7
kernel-bug-exists-upstream
kernel-bug-exists-upstream-4.4-rc7
When i suspend the laptop it refuses to resume. Only a cold boot works.
Lid switch does not respond. Nor does the power button.
** Tags added: kernel-bug-exists-upstream
** Attachment added: "dmesg.txt"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1530476/+attachment/4543189/+files/dmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1530476
Title:
** Attachment added: "wakeup"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1530476/+attachment/4543188/+files/wakeup
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1530476
Title:
Lenovo
so i have tried with pm-suspend, suspend from gnome3 and suspend on
inactivity. All results in a laptop that i cant wake up with lid switch
or power button.
I attached wakeup and dmesg.txt from the latest attempt. Debugging with
pm_trace reset the systems time.
>From dmesg.txt
[1.718604]
I have the same problem on my Lenovo helix 2gen.
When it is in suspend mode it wont wake up. I have to hold the power
button until it turns off and then boot again. My bios version at the
moment is 1.80 but i will upgrade to 1.83 and see if that helps.
If it doesnt ill run "sudo dmidecode -s
Done. Bug #1530476 is filed.
And no updating bios made no effect. Still there.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1515984
Title:
Can not wake up after suspend, Lenovo ThinkPad Helix
Public bug reported:
Using a fresh install of ubuntu 15.10. When the laptop enters suspend it
wont wake up. Not from trigging the lid switch or pressing the power
button.
Using Latest kernel 4.2.0-22-generic. Tried with two different bios
versions to rule out bios.
The only option is to press
Can you post a buildlog where compilation fails?
I suppose this is actually the same bug which we had in debian testing:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=806324#74
"
The problem is just that libQtUiTools.a has been built with the
binutils from unstable, which introduce new
Thank you Axel for pointing to the intel drivers. I installed the latest
drivers and enabled SNA again. It looks as if it takes longer to crash
now, but eventually it does. Prior to the update it was easy for me the
reproduce a crash with LibreOffice Calc. That requires a bit more effort
now. I
I confirm the fix is effective. For large environments where hooks have failed,
here's a one-liner after running the fix to re-run all the failed hooks, which
should return the agents to normal (idle) state:
for i in `juju status --format tabular|grep failed|awk '{print $1;}'`;do echo
Fixing
I confirm the fix is effective. For large environments where hooks have failed,
here's a one-liner after running the fix to re-run all the failed hooks, which
should return the agents to normal (idle) state:
for i in `juju status --format tabular|grep failed|awk '{print $1;}'`;do echo
Fixing
** Changed in: xorg (Ubuntu)
Status: Incomplete => New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1515784
Title:
UHD resolution not found when logging in, can select after login
To
Here is the output of running xrandr just after logging inm only the
third time all resolutions are found:
johan@cdh7:~$ xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 connected primary 1920x1080+0+0
The problem still occurs when using a kernel from vivid (3.19.0-35).
If I login, the resolution is not correct. If I fix the resolution
everything is fine until I logout (no need to reboot). If I login again,
the resolution is bad again.
The available resolutions seem to change from time to
Public bug reported:
Please sync gdal 1.11.3+dfsg-2 (universe) from Debian unstable (main)
Explanation of the Ubuntu delta and why it can be dropped:
* No-change rebuild for giflib soname change.
* No-change rebuild for hdf5 soname change.
* No-change rebuild for hdf5 soname change.
*
Updating the BIOS does not solve the problem.
Output: of sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date
V18.5
07/19/2014
Note that this is a regression when updating from utopic to wily.
** Changed in: xorg (Ubuntu)
Status: Incomplete => New
--
You received this
Thank you Georgi for the workaround. Works for me!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1510970
Title:
Intel driver crashes on Ubuntu 15.10
To manage notifications about this bug go to:
Thank you Anoop for referring to
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1510970
The workaround presented there works for me!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Hi,
After updating from vivid to wily I noticed my screen no longer boots in
UHD resolution. I can set the resolution during the session, but on next
login it returns back to full hd. This is a regression from vivid, where
the resolution worked without problem.
This happens
Sorry for the delay, but I was able to generate a backtrace as described
by Dirk Seidel in comment #7 and comment #8. The backtrace is attached.
** Attachment added: "gdb-X.txt"
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1510998/+attachment/4512905/+files/gdb-X.txt
--
You received
Sorry, I can't generate a backtrace, same problem as Dirk: after
executing "continue" in gdb my entire system freezes, so I can't get
back to the X session.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I have exactly the same problem since upgrading to 15.10. For me
reproducable in LibreOffice 5.0.3.2 Calc by a right mouse click followed
by selecting "Format Cells...".
Xorg.0.log.old:
[ 674.409] (EE) Backtrace:
[ 674.409] (EE) 0: /usr/bin/X (xorg_backtrace+0x4e) [0x55d163d7262e]
[
Thanks for the reminder! I think I'll give it a try since this is
something that would improve Squid performance for us.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to squid3 in Ubuntu.
https://bugs.launchpad.net/bugs/1235681
Title:
Thanks for the reminder! I think I'll give it a try since this is
something that would improve Squid performance for us.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1235681
Title:
squid3 always
i created a streaming music player https://bugs.launchpad.net/cloudmusic
and users have a bad experience because of this bug fix it please
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1241185
Title:
I recently moved from Opensuse with KDE (opensuse user since 2002) to Ubuntu,
and I must say, this is the thing that annoys me the most in Unity. I also
feel it should be an option.
In KDE it is a tick-box. By default it shows everything, but you can set it to
only show the windows in your
I get this on Xubuntu 14.04 whenever I connect via wifi to my ios
personal hotspot. Often it does nothing more than ask to send the report
but other times it hangs after a few minutes. I have found it so
disruptive that I am unable to get any work done while connected to my
phone. I will try some
I need to add that I have the latest versions of both libimobiledevice4
and libimobiledevice-utils and I still get this error. I dont get any
errors when connecting to any other wifi router or via ethernet cable.
Any suggestions would be appreciated.
--
You received this bug notification because
I have the same problem on Ubuntustudio
Platform:- x86_64
Distribution:- Ubuntu 15.04
Desktop environment:- Ubuntu Studio
$ gstreamer-properties
Gtk-Message: GtkDialog mapped without a transient parent. This is
discouraged.
--
You received this bug notification because you are a
Public bug reported:
Rasterio fails to build from source on i386 due to failing tests. A solution is
attached. These patches were also applied upstream and will be added to debian
as well (as soon as the libstdc++ transition is over).
More info upstream:
This happened to my openmailbox.org account just a few days ago. I am on
a fully updated elementary Freya (Geary 0.8.3)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1395449
Title:
Geary cannot
Can we make it so the new VTE release appear in Ubuntu 15.04 ?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1429584
Title:
gnome-terminal doesn't set $COLORTERM from 3.14 onwards
To manage
I have a similar issue with my laptop with AMD graphics running ubuntu
gnome 15.04, which I originally reported as #1447356. I have kernels
3.19.0-15 and 3.19.0-22 and both of them give a black screen after the
grub screen.
--
You received this bug notification because you are a member of Ubuntu
My doubt confirmed. I'll have to use rsync to fix the partial copies.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/67691
Title:
Nautilus can leave half-copied files on the target on error or
And now rsync reveals another problem... nautilus doesn't preserve mtime
while copying!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/67691
Title:
Nautilus can leave half-copied files on the target
echo '.notebook tab:active { background-color: @selected_bg_color; }'
~/.config/gtk-3.0/gtk.css
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/762349
Title:
Difficult to distinguish which tab is
Still happens on Xubuntu 15.04, but fixed upstream.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1388922
Title:
xdg-open doesn't properly detect Xfce/Xubuntu
To manage notifications about this
Public bug reported:
gnuradio-companion (part of gnuradio) does not start if python-numpy is
not installed.
However python-numpy is only installed as a dependency of python-
matplotlib which in turn is only a recomended by gnuradio.
python-numpy needs to be a dependency of gnuradio.
**
** Changed in: josm (Ubuntu)
Status: Triaged = Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1293874
Title:
Can't load Bing Sat, gives error input == null!
To manage
I'm closing all bugs against old versions of qgis or old versions of
ubuntu. Feel free to reopen if this still occurs in recent versions.
** Changed in: qgis (Ubuntu)
Status: Confirmed = Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Recent versions of the openlayers plugin require a recent version of qgis than
the version 2.0 provided in ubuntu trusty. You may want to upgrade to version
2.8.1
sudo add-apt-repository ppa:ubuntugis/ubuntugis-unstable
sudo apt-get update
sudo apt-get upgrade
--
You received this bug
Hello Karl,
You may want to consider using a repository with a more recent version
of qgis, eg the one of ubuntugis:
sudo add-apt-repository ppa:ubuntugis/ubuntugis-unstable
sudo apt-get update
#If you already have qgis installed:
sudo apt-get upgrade
#If you don't already have it:
sudo apt-get
I'm closing all bugs against old versions of qgis or old versions of
ubuntu. Feel free to reopen if this still occurs in recent versions.
Note that the openlayers plugin requires a recent version of QGis to
work properly.
** Changed in: qgis (Ubuntu)
Status: New = Incomplete
--
You
Does this still occur in recent versions of qgis/ubuntu?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/922435
Title:
Icons in QGIS menus are not visible
To manage notifications about this bug go
Public bug reported:
Since the click package was renamed to python-click-cli in ubuntu this
packages fails to build.
I've attached a debdiff which should fix this build.
** Affects: python-snuggs (Ubuntu)
Importance: Undecided
Status: New
** Patch added: debdiff to fix ftbfs on
Public bug reported:
Please sync freexl 1.0.1-2 (universe) from Debian unstable (main)
Explanation of the Ubuntu delta and why it can be dropped:
* SECURITY UPDATE: Fix multiple vulnerabilities (LP: #1437087):
- CVE 2015-2753: FreeXL before 1.0.0i allows remote attackers to cause a
On Tue, May 26, 2015 at 7:19 AM, Timo Jyrinki
timo.jyri...@canonical.com wrote:
Feel free to reopen this and the others now for wily :)
Thanks for the reminder :-)
Since most packages are now migrating to unstable - they should sync
automatically.
--
You received this bug notification because
Grass 7 is not (yet) compatible with the qgis grass plugin.
Note that there is a crowdfunding initiative to develop it:
http://www.gissula.eu/qgis-grass-plugin-crowdfunding/
The plugin will become available if you downgrade to grass 6.4. This
can be done using:
sudo apt-get install
Note that if everything works as expected after downgrading you probably want
to make sure grass doesn't update the next round, so hold it:
http://www.howtogeek.com/117929/how-to-downgrade-packages-on-ubuntu/
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
Do you have any extra repositories enabled?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1457973
Title:
package qgis-providers 2.0.1-2build2 failed to install/upgrade:
subprocess installed
I updated to 0.9.5-2 grabbed from wily and now it works ok.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1454246
Title:
nslcd: unable to daemonize
To manage notifications about this bug go to:
Closing as this is a bug report about an ancient unsupported version of
ubuntu. Feel free to reopen if this issue remains in supported versions.
** Changed in: postgis (Ubuntu)
Status: New = Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
Public bug reported:
Running in vivid with version 0.9.4-3 (AMD64) I random get no logins with nslcd
and I see this error message:
May 12 14:21:21 linuxdesktop02 nslcd[1087]: nslcd: unable to daemonize: Success
May 12 14:21:21 linuxdesktop02 nslcd[1087]: ...fail!
sudo service nslcd status
I set up a reminder to check this issue once again on Utopic. So, today
I went to http://packages.ubuntu.com/utopic/compiz, clicked on the
Changelog link, searched for #269904, and didn't find it.
Tank you Mateusz for having added an utopic tag to this issue.
However as time passes, I can't help
*** This bug is a duplicate of bug 1447838 ***
https://bugs.launchpad.net/bugs/1447838
The problems I'm having with my pc, which made me file this report, is
not related to the nvidia graphics drivers, my pc has AMD graphics.
--
You received this bug notification because you are a member of
Public bug reported:
Test
ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: birdfont (not installed)
ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
Uname: Linux 3.19.0-15-generic i686
ApportVersion: 2.17.2-0ubuntu1
Architecture: i386
CurrentDesktop: GNOME
Date: Sat Apr 25 11:44:27
I tried the recovery mode - resume normal boot workaround and it works
for me as well.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1447356
Title:
ubuntu gnome does not boot after install - blank
Here are the OOPS IDs:
1750e7fa-e93b-11e4-beb5-fa163e78b027
4a8c3ca8-e9f6-11e4-b32c-fa163e707a72
If I remember correctly I ran into the same issue two times.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
I installed Ubuntu GNOME Desktop amd64 with the with the 20150422 vivid
daily ISO on my laptop. The installer finished without any issues and
the system rebooted. When the system started again the grub menu
appeared and I selected Ubuntu. After this the screen went blank,
I found a way to boot into the gnome desktop. After starting the
computer as described above I let it sit for a few minutes with a blank
screen then I closed the lid and allowed it to suspend and then I
resumed again. Now the gnome start screen appeared and I could log in
normally.
After log in I
Can you explain how you can fuck up an LTS release upgrade (not even a
major upgrade)? If you just had *one* test system running, you would
have been able to reproduce this. Amateurs...
apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
This thread recommends installing Debian :D
http://www.linuxforums.org/forum/ubuntu-linux/204157-libpam-systemd-
dependency-error-unable-install-any-packages-anymo.html
I don't even know whether I can safely restart my computer in this
state. Also, 14.04 LTS DOES NOT HAVE systemd. Where did you
Attached is a debdiff for ubuntu vivid, using the same patch as the
bugfix for debian jessie (no refresh needed).
** Patch added: Debdiff for vivid
https://bugs.launchpad.net/ubuntu/+source/freexl/+bug/1437087/+attachment/4365393/+files/freexl_vivid.diff
--
You received this bug
Debdiff for trusty/utopic (only target must change).
This is exactly the same version uploaded to debian jessie - only the
changelog has been adapted to the ubuntu template.
** Patch added: trusty debdiff
I don't think there is a CVE number. I asked in the upstream bugtracker
to be sure.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1438875
Title:
Database crash with invalid geoJSON input
To manage
For utopic and trusty in principle a sync from debian jessie would be
fine. Should I just take a debfdiff from that version and use the same
version number as in debian or should I use ubuntu version number?
For vivid we will need our own version.
--
You received this bug notification because
** Patch added: vivid debdiff
https://bugs.launchpad.net/ubuntu/+source/postgis/+bug/1438875/+attachment/4363265/+files/postgis_vivid.diff
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1438875
** Patch added: Utopic debdiff
https://bugs.launchpad.net/ubuntu/+source/postgis/+bug/1438875/+attachment/4363268/+files/postgis_utopic.patch
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1438875
** Patch added: trusty debdiff
https://bugs.launchpad.net/debian/+source/postgis/+bug/1438875/+attachment/4363368/+files/postgis-trusty.diff
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1438875
I didn't see comment #6...
So is there a solution for 12.04 users who use the PPA version?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1350813
Title:
New windows don't open in the current working
This change breaks the F2 functionality in Ubuntu 12.04
(This one: http://bazaar.launchpad.net/~kirkland/byobu/trunk/revision/2405)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1350813
Title:
New
I didn't see comment #6...
So is there a solution for 12.04 users who use the PPA version?
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to byobu in Ubuntu.
https://bugs.launchpad.net/bugs/1350813
Title:
New windows don't open in the
This change breaks the F2 functionality in Ubuntu 12.04
(This one: http://bazaar.launchpad.net/~kirkland/byobu/trunk/revision/2405)
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to byobu in Ubuntu.
** Information type changed from Private to Public Security
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1433255
Title:
Please rebuild saga against latest gdal
To manage notifications about this
Public bug reported:
?
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: ubiquity 2.18.7 [modified:
lib/partman/automatically_partition/question]
ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9
Uname: Linux 3.13.0-24-generic i686
ApportVersion: 2.14.1-0ubuntu3
Architecture: i386
Unsubscribing ubuntu-sponsors as this will not make it as a feature
freeze exception.
I will provide updated packages in my ppa and in ubuntugis.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1423670
I have also encountered the two issues Michael mentions and two others
in the upstart script /etc/init/squid3 that are - from my perspective -
essential to get SMP Squid3 working. They are:
* an expect daemon line needs to be included
* a statement that checks for the presence of /var/run/squid3
I have also encountered the two issues Michael mentions and two others
in the upstart script /etc/init/squid3 that are - from my perspective -
essential to get SMP Squid3 working. They are:
* an expect daemon line needs to be included
* a statement that checks for the presence of /var/run/squid3
Closed as I'm not convinced this fits a freeze exception.
** Changed in: qlandkartegt (Ubuntu)
Status: New = Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1423671
Title:
Sync
Public bug reported:
Please sync osmosis 0.43.1-3 (universe) from Debian unstable (main)
This is a targeted bugfix. It was also accepted for debian Jessie:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=779823
Changelog entries since current vivid version 0.43.1-2:
osmosis (0.43.1-3)
I will close as I am not convinced this fits the criteria for a Freeze
exception.
** Changed in: osm2pgsql (Ubuntu)
Status: New = Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1423656
** Changed in: geos (Ubuntu)
Status: Fix Committed = Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1274916
Title:
missing php library support
To manage notifications about this
** Description changed:
Please sync osmosis 0.43.1-3 (universe) from Debian unstable (main)
This is a targeted bugfix. It was also accepted for debian Jessie:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=779823
+ I have verified and it builds fine in a vivid pbuilder.
+
I filed a bug against libvigraimpex earlier:
https://bugs.launchpad.net/ubuntu/+source/libvigraimpex/+bug/1404996
In short: saga fails to build against this version of the library.
I've not had time to investigate in detail, but by excluding this
module at least the rest of SAGA builds.
SAGA
: No such file or
directory
- #include hdf5.h
-
+ #include hdf5.h
Johan
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1404996
Title:
Can not build against libvigraimpex on vivid
To manage notifications
Public bug reported:
Please sync qlandkartegt 1.8.1+ds-1~exp1 (universe) from Debian
experimental (main)
Changelog entries since current vivid version 1.7.7-3:
qlandkartegt (1.8.1+ds-1~exp1) experimental; urgency=medium
* New upstream release.
- Fixes MapQuest routing service.
* Update
Public bug reported:
Saga fails to build with the version of libvigraimpex in vivid.
I suggest removing the plugin. This will not harm users as this plugin
was also disabled in the current package of saga.
I've attached a debdiff that disables libvigraimpex.
** Affects: saga (Ubuntu)
Public bug reported:
Please sync osm2pgsql 0.87.1-1~exp1 (universe) from Debian experimental
(main)
I've tested in a vivid pbuilder. The uploader confirms this can be
upgraded.
osm2pgsl: 0.87.1-1~exp1 vs 0.86.0-1
Not truly experimental, can be synced.
** Description changed:
- Saga fails to build with the version of libvigraimpex in vivid.
+ Saga (v2.1.4) fails to build with the version of libvigraimpex in vivid.
I suggest removing the plugin. This will not harm users as this plugin
was also disabled in the current package of saga.
Public bug reported:
Please sync freexl 1.0.0h-1~exp1 (universe) from Debian experimental
(main)
Changelog entries since current vivid version 1.0.0g-1:
freexl (1.0.0h-1~exp1) experimental; urgency=medium
* New upstream release.
* Add upstream metadata.
* Add gbp.conf to use pristine-tar
Public bug reported:
Please sync postgis 2.1.5+dfsg-1~exp2 (universe) from Debian
experimental (main)
Changelog entries since current vivid version 2.1.4+dfsg-2:
postgis (2.1.5+dfsg-1~exp2) experimental; urgency=medium
* Update symbols for liblwgeom-2.1.5.
* Update Homepage URL from
Public bug reported:
Please sync openlayers 2.13.1+ds2-1~exp1 (universe) from Debian
experimental (main)
Changelog entries since current vivid version 2.11+ds1-1:
openlayers (2.13.1+ds2-1~exp1) experimental; urgency=low
[ Jonas Smedegaard ]
* Add patch to improve GeoRSS parsing.
[ David
Fixed in https://launchpad.net/ubuntu/+source/osm2pgsql/0.82.0-1git1
** Changed in: osm2pgsql (Ubuntu)
Status: New = Incomplete
** Changed in: osm2pgsql (Ubuntu)
Status: Incomplete = Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
** Changed in: proj (Ubuntu)
Status: New = Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1346011
Title:
segfault in proj 4.7.0-2
To manage notifications about this bug go to:
A note about Ryan's comment #364 : compiz --version shows 0.9.11.3.
Wasn't the bug supposed to be fixed in 0.9.12.1 ?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/269904
Title:
Screen refresh
And also fixed in 0.9.11.4, but not in 0.9.11.3.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/269904
Title:
Screen refresh problems with nvidia cards
To manage notifications about this bug go to:
Upstream-Contact to copyright file.
[ Johan Van de Wauw ]
* Imported Upstream version 0.8.12
-- Johan Van de Wauw johan.vandew...@gmail.com Sun, 28 Dec 2014
20:37:45 +0100
** Affects: owslib (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification
I see a new compiz package version 1:0.9.12.0+15.04.20150202-0ubuntu1 for Vivid
has been published on 2015-02-02.
However, according to the changelog of that realease, it does not close bug
#269904.
So this raises the question: why has the status changed to Fix Released ? I
can't seem to find a
OK, now i see that source package compiz 0.9.12.1 has been released.
However i'm a bit confused with the launchpad site to determine when
this package is scheduled to be built and on which specific binary
distributions is it going to land. Where can I see a link between this
source release and
301 - 400 of 3110 matches
Mail list logo