Public bug reported:
Binary package hint: ubuntuone-client
None
ProblemType: Bug
.home.will..cache.ubuntuone.log.syncdaemon.exceptions.log:
.home.will..config.ubuntuone.syncdaemon.conf:
[bandwidth_throttling]
on = False
read_limit = 0
write_limit = 0
** Attachment added: .home.will..cache.ubuntuone.log.oauth.login.log.txt
http://launchpadlibrarian.net/42830699/.home.will..cache.ubuntuone.log.oauth.login.log.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/42830700/Dependencies.txt
** Attachment added:
Public bug reported:
After installing Ubuntu 12.04 on my desktop PC and installing
proprietary graphic card drivers and rebooting ubuntu fails to boot up
and switches between black screen and flashes of desktop without unity
menu. I am currently running on PC Nvidia Geforce 7100 Graphics card.
Thank you Alejandro. I was able to successfuly install the 295.33 driver
through terminal on Precise 12.04. To stop it updating to a higher
version of that particular package, I then then installed synaptic
package manager and locked the 295.33 package so it cannot be updated. I
will leave it that
Has anyone tried the 295.49 driver yet and is it working OK. I have read
one prevous post which stated that this driver hung his system. But
reading his attached printout it would appear he may have had the 295.40
driver installed and not the 295.49.
--
You received this bug notification because
Hi Ben, If Update Manager still wants to install the old driver, go to
Synaptic Package Manager and lock the new driver. That way in will stop
it from wanting to install the old one. Once the new driver is released
then unlock it.
--
You received this bug notification because you are a member of
Just to advise that I have just installed the 295.49 driver and
everything is working OK.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/982485
Title:
[regression] Nvidia 295.40: Unity 3D does not
Yes I am getting similar behaviour. It only started yesterday. I will
suddenly get the same message as above after I have been logged into my
PC for about 20mins or so. It just comes out of nowhere. I don't use a
password or keyring etc to login. But this message pops up out of
nowhere after a
Hi Evan if you are running 64 bit Ubuntu 12.04 precise go to the link
below and download the 55.9MB Deb file. Once downloaded open it and
install it it will automatically install through software centre. It
does work and fixed all my problems with the previous driver.
Hi Madbiologist, I downloaded and installed the 295.49 driver from
launchpad see post #152. Mine is running perfectly. I am running Ubuntu
12.04 with a Nvidia Geforce 7100 Graphics Card. I did not bother
downloading from proposed as I already had a working driver.
Not sure if you are just
Don Just install the 295.33 driver through your normal terminal with the
following commands:
sudo add-apt-repository ppa:ubuntu-x-swat/x-updates
sudo apt-get update
sudo apt-get install nvidia-current=295.33-0ubuntu1~precise~xup1
On reboot it will be working. The update manager will then want to
Hi Shahin if you graphics card isn't working reinstall your operating
system then try what I have outlined in my previous post. It does work.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/982485
Hi Don Its good to hear you are up and running. I should have mentioned
in my previous post that although you have locked the driver from
updating in synaptic and update manager. Be careful if you are doing
updates through terminal apt-get as this does not recognise the lock
in synaptic and will
Hi Bryce I take on board what you are saying but like most of us here
and many others out there who have upgraded from a previous version of
Ubuntu to 12.04 whether by fresh install or update we expected at a
least this these type of basic problems i.e. Graphic Card issues would
have been ironed
Alex that looks lik a fix for the 64 bit driver. No mention of a briver
for 32 bit systems.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/982485
Title:
[regression] Nvidia 295.40: Unity 3D does not
I still have the 295.33 driver installed and they have been working for
the last4 days now since I insalled them without any problems.
I do note from post #101 and a couple of others that an updated driver
(295.49) is now availale after the troublesome 295.40 driver.
Can anyone confirm whether
Hi Matt, Yes I did read your previous post. Did you try and install the
new driver after you done a fresh install or did you try to install to
install it on a system you had already tinkered with and changed the
settings.
I have found from previous experience that it is better to try the new
I too am using exactly the same netbook with Ubuntu 12.04 installed. I
also have a similar problem with a cursor that flickers randomly and
sometimes disappears for a short time. Particularly when hovering over
website links or or icons particularly in System Settings. It can be
quite annoying at
I can confirm that I have just installed th GMA3600 driver for the Acer
Cedarview from the Proposed Restricted Releases Repository and this
cursor proplem has been fixed with that update. This update has also
fixed brightness and resolution problems that that go hand in hand with
the cursor
I can confirm that the packages for this bug in proposed updates have
fixed the problem. Once installed just logout and back in and the
problem will be gone.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
This bug also affects Image Viewer. When pictures are opened and then
the page maximised the maximise, minimise, close buttons slip up under
the top panel and cannot be accessed.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Thank You Whitaar that workaround worked like a charm and fixed all my
misbehaving windows on all of my PC's. Your help is very much
appreciated.
Cheers Wal
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net
Public bug reported:
Have Ubuntu 14.04 installed on a Desktop and a Laptop. Since installing
I have noticed that when some pages when they are opened minimised
usually by default, that Minimise, Maximise Close Buttons are hidden
under the top taskbar and can not be accessed. This happens on
*** This bug is a duplicate of bug 1532508 ***
https://bugs.launchpad.net/bugs/1532508
I can also confirm that this bug is still present on Ubuntu 16.04.3.
When screen is resuming from being blank it will randomly continue to
flicker to a black screen then back. This might only happen once in
The fix by bugrasan works OK and gets the emojis down to normal size
however the emoji's are no longer colour but black and white. This is at
least a good workaround for the time being.
I think you will find this problem will be fixed in a later version of
Thunderbird. I downloaded Thunderbird 60
I can confirm I too have this problem. Three pc's running ubuntu 18.04
and all have the same problem in thunderbird. This was not present
running thunderbird on Ubuntu 16.04. This problem does not replicate on
thunderbird in Windows. It would appear that it is Operating System
specific.
--
You
Just in to be fair to Canonical or even Thunderbird Developers and their
people it is impossible to test an application for every bug that may
arise. How would you see and test an emoji email would you even think of
it. There are so many things that take place when you start your email
client. I
@jchittum, confirmed also your fix using fresh `vagrant init ubuntu/focal64`
and `vagrant up`
thx
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1874453
Title:
ubuntu/focal64 very slow to boot and
Nope. Going to Edit-Preferences shows an empty 'Camera' list and a
Resolution list with only 320x240 in it, nothing else.
--
Cheese doesn't detect my webcam
https://bugs.launchpad.net/bugs/197659
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I can confirm this bug on kubuntu intrepid, fully updated.
Also ~/.kde/share/config/.plasma-appletsrc contains no information
whatsoever about firefox, only generic stuff as to where to place the
plasmoids, what desktop background to use etc.
--
kubuntu kde4 intrepid kickoff menu, items added
Fixed it for me. I did have to remove the icons from favorites and add
them again, but now the icons did come along!
--
kubuntu kde4 intrepid kickoff menu, items added to favorites dont keep correct
icon, generic gear shown
https://bugs.launchpad.net/bugs/254688
You received this bug
Same here in Kubuntu Intrepid. Logitech QuickCam Express works fine in
camorama but Cheese doesn't detect it.
--
Cheese doesn't detect my webcam
https://bugs.launchpad.net/bugs/197659
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Same as Eaglescreen.
Mute does not work, volume up and down works and display is always at
0%.
This is on a Creative Soundblaster Audigy 2 ZS.
--
KMilo/Volume Hotkeys regression
https://bugs.launchpad.net/bugs/118723
You received this bug notification because you are a member of Ubuntu
Bugs,
I can confirm the same behaviour but not on the same hardware.
I'm running on a Asus P4P800 SE motherboard with Intel 865 PE chipset.
I'm using the nvidia drivers for a GF 6800 Ultra. I tried both
intel_agp/agpgart and NvAGP, both show the same problem.
--
Resume immediately after Suspend due
It hasn't happened since, but then again, I'm not cleaning up my home
directory on a daily basis...
It's not the only time I lost my mouse cursor though, that has happened
to me several times, mostly when other programs crash, like Dolphin,
Firefox or wine with some game.
--
dolphin crashed
Same behaviour here on Kubuntu Intrepid, fully updated.
--
eject button and command opens and closes the tray in a single invocation
https://bugs.launchpad.net/bugs/286128
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
I have the exact same problem on the laptop I just installed Gutsy on...
Any fix available?
--
Amarok will not start in Kubuntu Gutsy
https://bugs.launchpad.net/bugs/149936
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
I don't know if it helps anyone else, but I got it fixed by installing
xine-ui. Don't know how and why it's related but it works so I'm happy!
--
Amarok will not start in Kubuntu Gutsy
https://bugs.launchpad.net/bugs/149936
You received this bug notification because you are a member of Kubuntu
I have a laptop here too with Gutsy using a SiS5513 HDD controller. It
fails to boot using the 'default' kernel, 2.6.22-14.
My current workaround is to set 2.6.20 as the default kernel, which
still has the module, but I can hardly call that a proper solution. Why
has this driver been removed?
After reading a lot of comments on this 'bug', I found a way to fix it.
Suspend started working after changing the USB from +5V to +5VSB. I do
get a message about half the times that 1 application refused to freeze:
Plasma. After the suspend attempt, I have to kill plasma and restart it.
If I try
It seems (not 100% confident yet) that this is fixed now. It might be
Ubuntu updates but I also changed video settings: I replaced agpgart
with NvAGP to get suspend/hibernate working. Maybe that also fixed this
issue since I haven't seen the low graphics mode warning about during 8
bootups now.
I have just downloaded the 9.04 alpha 3 to try this. Volume up and down
works fine in Kubuntu 9.04 Alpha 3, but mute still does not work. But
this is most likely caused by there not being a mute option on the PCM
channel of my sound card driver (Soundblaster Audigy 2 ZS). I still do
not see why
I 'fixed' it now by deleting ~/.kde/share/config/plasmarc
Put the old plasma-appletsrc back in place so I have my desktop back
with widgets etc. But still a strange thing that this could happen.
--
[jaunty] plasma crashes on start with SIGSEGV
https://bugs.launchpad.net/bugs/338205
You received
One further addition:
During boot up, I first get an X.org screen with the NVidia logo. After
that I see the boot messages in text mode for a short while. After that
I get the Low graphics mode message and when I Cancel that message
within a couple of seconds the next thing is KDM. So apparently
In order to prevent my repport on this from becoming automatically
tagged invalid as well, I'll just second this one. I get KBluetoothd
crashes all the times, sometimes it even seems to result from me
thinking about using the bluetooth adapter. All in all kbluetoothd seems
to be VERY unstable and
Public bug reported:
For the Seiko SmartLabel series of label printers, Seiko has made available a
driver, which can be downloaded from
http://siibusinessproducts.com/support/linuxdriver_sla.html
It requires manual compilation and the makefile needs to be adapted to
suit Ubuntu (because there
** Changed in: motion (Ubuntu)
Status: New = Confirmed
--
motion is unable to use ffmpeg library
https://bugs.launchpad.net/bugs/281436
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I just added intrepid-proposed to my apt sources and updated
kbluetooth4.
When I run kbluetooth4 I can send a file to my phone using bluetooth
when I rightclick the bluetooth icon in the systray and select send
file. But when I select Device Manager, click on 'New' and then 'Next',
'Next', my
I haven't seen it the last 2 weeks or so, but the last time that I said
that it wasn't final either. But at the moment it seems to be fixed!
--
Invalid 'low graphics mode' warning
https://bugs.launchpad.net/bugs/339595
You received this bug notification because you are a member of Ubuntu
Bugs,
Asus p5vd2-mx motherboard here, also unable to boot, kernel 2.6.27-14
works without parameters, (did see some irq vendor ?? code fill up my
screen) to get 2.6.28 working i had to start with acpi=off nolapic
noapic parameters..
Now resulting in auto harware (resolution) detection failure for my
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/24302846/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/24302847/CurrentDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/24302848/Dependencies.txt
**
Public bug reported:
After powering on the machine said 'Waking up' and a few seconds later
'Attempting normal boot' so it seems to have failed.
ProblemType: KernelOops
Annotation: This occured during a previous hibernate and prevented it from
resuming properly.
Architecture: i386
And it is back. The last 5 boots have given me the same warning again.
Is there any way that this could be caused by me having an upgrade of
8.10 instead of a fresh installation of 9.04? I'm wondering what is up
here as apparently noone seems to have the same problem. The warning
also mentions
It took a while before I got it again and actually noticed it(sometimes
I walk away when booting the computer and do not notice if it boots
normally or resumes from hibernation), but it just happened again.
** Attachment added: cat /proc/cmdline
** Attachment added: Output of dmesg
http://launchpadlibrarian.net/24488025/dmesg.log
--
[Asus P4P800SE] hibernate/resume failure [non-free: nvidia]
https://bugs.launchpad.net/bugs/347847
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
And the last requested file.
** Attachment added: cat /etc/initramfs-tools/conf.d/resume
http://launchpadlibrarian.net/24488072/resume
--
[Asus P4P800SE] hibernate/resume failure [non-free: nvidia]
https://bugs.launchpad.net/bugs/347847
You received this bug notification because you are a
And some attachments from the initial report as of now
** Attachment added: ProcCpuinfo.txt
http://launchpadlibrarian.net/24488090/ProcCpuinfo.txt
--
[Asus P4P800SE] hibernate/resume failure [non-free: nvidia]
https://bugs.launchpad.net/bugs/347847
You received this bug notification because
BTW, is there any way to attach multiple files at once?
** Attachment added: Lspci.txt
http://launchpadlibrarian.net/24488098/Lspci.txt
--
[Asus P4P800SE] hibernate/resume failure [non-free: nvidia]
https://bugs.launchpad.net/bugs/347847
You received this bug notification because you are a
** Attachment added: Lsusb.txt
http://launchpadlibrarian.net/24488103/Lsusb.txt
--
[Asus P4P800SE] hibernate/resume failure [non-free: nvidia]
https://bugs.launchpad.net/bugs/347847
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Attachment added: ProcInterrups.txt
http://launchpadlibrarian.net/24488135/ProcInterrups.txt
--
[Asus P4P800SE] hibernate/resume failure [non-free: nvidia]
https://bugs.launchpad.net/bugs/347847
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: ProcModules.txt
http://launchpadlibrarian.net/24488143/ProcModules.txt
--
[Asus P4P800SE] hibernate/resume failure [non-free: nvidia]
https://bugs.launchpad.net/bugs/347847
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
uname -r:
2.6.28-11-generic
Fully updated(as of about 5 hours ago) 9.04 setup.
--
[Asus P4P800SE] hibernate/resume failure [non-free: nvidia]
https://bugs.launchpad.net/bugs/347847
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Public bug reported:
On jaunty jackalope development preview, I get an incorrect warning
about being in low graphics mode.
About every time I boot my computer, I first get a message that Ubuntu
is running in low graphics mode. Then I get a menu showing options to
fix it. If I click 'Cancel' in
I have the same problem: plasma will not start at all.
I tried the above workaround, removing all mentions of geometry in
/usr/share/kubuntu-default-settings/kde4-profile/default/share/config
/plasma-appletsrc and from ~/.kde/share/config/plasma-appletsrc as well.
This did not help. I also tried
Found a sollution, this bug is sitting here way to long, ok here's what i did :
Install the following packages:
libavcodec-unstripped-51
libavformat-unstripped-52
Might need both might need one of these, either way i have installed
this and now motion works.
Please note that these are
Same here on Kubuntu Intrepid x86.
Okular 0.7.2 on KDE 4.1.2, nvidia restricted driver on a GeForce 6800
Ultra.
The presentation starts in the top left of my screen as on the
screenshot in the first post!
--
okular can't presentation fullscreen
https://bugs.launchpad.net/bugs/292098
You
I have the same problem on a Macbook Pro 5,5; consoles are garbled.
Furthermore, if I connect an external monitor and enable it using
nvidia-settings the colorful garbage also appears on this external
monitor. The laptop screen remains functional though.
--
Ctrl + Alt + F1 etc. fail to send me
I tried installing kpackagekit-dbgsym but it does not seem to be
available. The only dbgsym I could find was:
eg...@daedalus:~$ apt-cache search dbgsym
pkg-create-dbgsym - automatically build debug symbol ddeb packages
Anyway, I tried to run dbg on the process, but right now I could not
I have the same problem. Not only with VPN but also with 3G connections
when I plug in my phone using USB. nm-applet works fine for these tasks,
but the kde network manager does not seem to recognize the clicks as
nothing happens as described above. The popup window just stays open and
nothing
Public bug reported:
While I personally detest kpackagekit and have continued using Adept on
Karmic Koala, there seems to be no way around it because every now and
then a KPackageKit message pops up telling me there are available
updates.
Sometimes I then using adept or 'apt-get upgrade' to
Public bug reported:
I got this message after I opened my MBP 5,5 after suspending. Wireless
seems to work as I'm filing this bug report right now but apparently
something went wrong.
I'm using s2ram instead of kernel suspend by the way.
ProblemType: KernelOops
Annotation: Your system might
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/33823650/AlsaDevices.txt
** Attachment added: AplayDevices.txt
http://launchpadlibrarian.net/33823651/AplayDevices.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/33823652/BootDmesg.txt
**
Ow, right, now I see, it was another driver, the sound driver. This bug
is then probably a duplicate of one of the others. I thought I saw
mentioning of 'wl' somewhere so I figured it must have been the wireless
driver for the broadcom chip, but it seems to be only the mentioning of
the non-free
Public bug reported:
It seems that the session saving of KDE 4.2 (on Jaunty) works terrible.
It has taken me at least 2 weeks to get Amarok saved in the session,
most of the times it did not start up automatically. But what DOES
happen a lot is that I open just any program and somehow that WILL
And once again apport asked me to report the same bug. Is there any way
I can ask apport to attach the backtrace and other files to an existing
bug report instead of reporting a new one?
--
[Asus P4P800SE] hibernate/resume failure [non-free: nvidia]
https://bugs.launchpad.net/bugs/347847
You
Public bug reported:
Binary package hint: gedit
Pressing Ctrl+Left Arrow moves one word to the right, not the left.
***Note: This only applies to the left arrow key on the numeric keypad
(shared with the '4'). The left arrow key in the cluster of arrow keys
in the separate keyboard section
Hi Daniel,
Thanks for your message. Ubuntu 6.10 (GNOME desktop edition); gedit
2.16.1. My copy of Ubuntu seems up to date with all current patches
etc.
The keyboard is a Microsoft Internet Keyboard Pro. No special
configuration that I'm aware of; I'm running everything out of the
box. I use the
Daniel, Sebastian:
The problem is indeed in GTK+, in gtk/gtktextview.c line 851 (as of GTK
2.10.6). There is an error in the way the key bindings are set up:
add_move_binding (binding_set, GDK_Right, GDK_CONTROL_MASK,
GTK_MOVEMENT_WORDS, 1);
add_move_binding (binding_set,
Same here. Apparently it hasn't been fixed/added in oneiric. How about
pangolin?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/327235
Title:
unicode-math not included
To manage notifications about
Same here. I gave up after numerous attempts to set a (empty) value for
these keys but to no avail. Redirecting to stderr fixes.
--
apt cron.daily script doesn't check value-existence
https://bugs.launchpad.net/bugs/223502
You received this bug notification because you are a member of Ubuntu
Same here. I gave up after numerous attempts to set a (empty) value for
these keys but to no avail. Redirecting to stderr fixes.
--
apt cron.daily script doesn't check value-existence
https://bugs.launchpad.net/bugs/223502
You received this bug notification because you are a member of Ubuntu
Updating udev has fixed this for me as well it seems.
I have not tried very extensively, but it's looking good now!
--
CD-ROM tray closes automatically after eject
https://bugs.launchpad.net/bugs/283316
You received this bug notification because you are a member of Ubuntu
Bugs, which is
For me this bug is still unchanged, volume up/down work but display
always show 0%
Mute still does not work, display shows 0% but nothing changes.
--
KMilo/Volume Hotkeys regression
https://bugs.launchpad.net/bugs/118723
You received this bug notification because you are a member of Kubuntu
Oh, this is on Kubuntu 8.10 by the way, I haven't tried in 9.04, if I
have time next week I'll see if I can find out.
--
KMilo/Volume Hotkeys regression
https://bugs.launchpad.net/bugs/118723
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Found a fix, added the parameters
--prompt-rootpass
and
--purge-root
the first probably solved it for me..
--
ltsp-build-client --arch i386 failes at password for root
https://bugs.launchpad.net/bugs/667378
You received this bug notification because you are a member of Ubuntu
Bugs, which is
i meant --purge-chroot
--
ltsp-build-client --arch i386 failes at password for root
https://bugs.launchpad.net/bugs/667378
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Tags added: i386 ltsp ltsp-build-client passwd root
--
ltsp-build-client --arch i386 failes at password for root
https://bugs.launchpad.net/bugs/667378
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
DO NOT POST ANY MORE UNSUBSCRIBE COMMENTS HERE PLEASE! IT DOES *NOT* WORK!
-
PEOPLE, COME ON! As have been explained plenty of times, attaching a comment
saying 'unsubscribe' here will not unsubscribe you from this bug. It could be
that indeed the unsubscribe functionality is broken, BUT
Public bug reported:
Steps to reproduce:
Install 10.04 (32-bit desktop edition) within Windows using Wubi.
Boot Ubuntu and start a package update. This updates 'grub'.
During the package install phase, 'grub' pops up a window that asks you whether
or not to perform the update.
If you do NOT
I can confirm this problem, at least partially. I'll test some more.
I did a fresh install of Lucid on my new PC. First, networking worked
fine. Then I tried suspending, but resume did not work so I performed a
cold reboot. After that, networking did not come up.
The fix proposed, removing
Hi Jordan,
I'd love to look for lupin-support, but yesterday, during another package
update, a new kernel got installed that somehow failed to update grub at
least that is my guess). This left me with the grub command line when
booting. That was the point where I gave up for now.
Anyway this
** Changed in: ltsp (Ubuntu)
Status: New = Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/667378
Title:
ltsp-build-client --arch i386 failes at password for root
--
Why is it even in the repositories if the current release is around 2
years old? The package should be dropped if noone is going to maintain
it, because then at least it doesn't give the (false) impression that
you can get an up to date version from the repository.
--
You received this bug
+1 for the bug, thanks for the workaround with the script.
Someone please incorporate this into the package, this is ridiculous!
--
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to the bug report.
https://bugs.launchpad.net/bugs/45026
Title:
Public bug reported:
While doing a release upgrade from oneiric to precise
ProblemType: Package
DistroRelease: Ubuntu 12.04
Package: ifupdown 0.7~alpha5.1ubuntu5.1
Uname: Linux 3.0.17xls-domU+ x86_64
ApportVersion: 1.23-0ubuntu4.1
Architecture: amd64
Date: Fri Jun 27 21:39:09 2014
ErrorMessage:
The same thing is happening to me in Kubuntu Trusty:
$ sudo apt-get install libjetty-extra-java
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if
You're right, my nvidia card is not turned off. /rpco/acpi/bbswitch
listed it as on. Battery usage was better than before, though. Maybe
because when not actually using the GPU, it at least scales down to a
lower frequency, conserving power (because an additional issue, most
likely related to the
Just to update: where I said 'turned off by default' I realized I don't
actually know what I'm talking about.
I never had a Optimus-laptop before, and I never worked with Bumblebee
or the like. Therefore I don't know what the state is, and/or how this
is supposed to work.
Ideally, of course, the
I just installed kernel 4.4.0-23.41 from xenial-proposed and it seems to
include whatever alleviated this issue. My laptop isn't crashing
anymore.
There is the occasional glitch: sometimes when I enter my password at
the login screen, the screen will actually not redraw at stay at the
login
I'm not sure if this is still / again the same problem, but I have a
very similar issue on a recently bought Clevo P650RA laptop, running
Ubuntu Xenial / 16.04 and the similar bug search when reporting a new
bug led me to this issue.
The brightness keys do not work; setting the brightness
1 - 100 of 154 matches
Mail list logo
