[Bug 1838151] Re: Poor quality audio with modern Bluetooth headsets in HSP/HFP. Missing wide band speech support (Bluetooth A2DP codecs).
I think the problem was in the headphones. I found I was having trouble on my phone as well. I contacted Sony support and they had me try a soft reset of the headset, which seems to have restored function. I am still getting bad mic sound on bluetooth, but I think it is just the low quality sound on this thread and not the completely muffled sound I was getting before. I will try reconnecting to the DG80 now and see if it is any better. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1838151 Title: Poor quality audio with modern Bluetooth headsets in HSP/HFP. Missing wide band speech support (Bluetooth A2DP codecs). To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1838151/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1838151] Re: Poor quality audio with modern Bluetooth headsets in HSP/HFP. Missing wide band speech support (Bluetooth A2DP codecs).
I can't seem to get the DG80 working correctly under PopOS 20.10. It works great for listening to music (though that worked directly on bluetooth without issues) but I can't seem to get the correct mode for talk. Since you say you have success with it, I will play with it some more before returning it and see if I can get it set up properly. It is probably some kind of configuration thing on my end, but I was hoping it would solve my microphone problems. As it stands, my best option is using the headset with my phone for Teams calls--the sound works perfectly there. If I find the right magic, I'll reply again here. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1838151 Title: Poor quality audio with modern Bluetooth headsets in HSP/HFP. Missing wide band speech support (Bluetooth A2DP codecs). To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1838151/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1838151] Re: Poor quality audio with modern Bluetooth headsets in HSP/HFP. Missing wide band speech support (Bluetooth A2DP codecs).
I installed pulseaudio-modules-bt and it does give some new options for sound output and possibly better sound, but microphone sound quality was still iffy. Recorded sound on Audacity seemed better and was slightly louder (according to the DB meter), but a test call on Microsoft Teams was still muffled and unintelligible. I have ordered a Avantree DG80 dongle (which makes the bluetooth connection externally and appears to linux as usb audio) and will hopefully be able to continue working with that, but I would love to see this problem resolved in pulseaudio. For the record, I am using a Sony WH-1000XM4 headset on PopOS 20.10 running on a System76 Darter Pro. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1838151 Title: Poor quality audio with modern Bluetooth headsets in HSP/HFP. Missing wide band speech support (Bluetooth A2DP codecs). To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1838151/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1872391] Re: underscore not shown in geany editor window
I am seeing this same problem, and a workaround is to use Liberation Mono Regular font. For whatever design reason, the underscores are visible in Geany with this font. Not an ideal solution, but it is a workaround that lets you keep using Geany. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1872391 Title: underscore not shown in geany editor window To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/geany/+bug/1872391/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1654445] Re: Acer, Inc ID 5986:055e device not functioning
Just for grins, I also tested rc4. Same results. Here is the uname -a: Linux rbmlenovo 4.10.0-041000rc4-generic #201701152031 SMP Mon Jan 16 01:33:39 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1654445 Title: Acer, Inc ID 5986:055e device not functioning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1654445/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1654445] Re: Acer, Inc ID 5986:055e device not functioning
Tested with 4.10.0-041000rc2-generic. Still did not work. Camera light comes on, but image on cheese screen is black. If I go to Cheese preferences, I see Device as "Lenovo EasyCamera" but the dropdown menu is greyed out and I can't select it. Running [vlc v4l2:///dev/video0] gives me the video light, but VLC shows me the orange cone instead of any video. Running [mplayer tv:// -tv driver=v4l2:width=640:height=480:device=/dev/video0] gives me a bunch of repeated error messages as follows: v4l2: select timeout [mjpeg @ 0x7fe16d767100]No JPEG data found in image Error while decoding frame! [mjpeg @ 0x7fe16d767100]No JPEG data found in image Error while decoding frame! v4l2: select timeout [mjpeg @ 0x7fe16d767100]No JPEG data found in image Error while decoding frame! [mjpeg @ 0x7fe16d767100]No JPEG data found in image Error while decoding frame! Here in the result from uname -a: Linux rbmlenovo 4.10.0-041000rc2-generic #201701011831 SMP Sun Jan 1 23:33:09 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux Same result from lsusb as above. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1654445 Title: Acer, Inc ID 5986:055e device not functioning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1654445/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1654445] [NEW] Acer, Inc ID 5986:055e device not functioning
Public bug reported: I was following bug #1433906 in the hopes that it would fix the problem with this device, and was instructed to open a separate bug for this. The camera stopped working a few Ubuntu versions ago. It shows up in lsusb as follows: Bus 002 Device 003: ID 5986:055e Acer, Inc When I use cheese or other camera applications, the light next to the camera goes on but the video output is all black. I am currently using yakkety (16.10) and I have enabled proposed to get the latest kernel and test the fix from the other bug. Here is the version output from uname -a (with hostname removed out of excessive security paranoia): Linux 4.8.0-34-generic #36-Ubuntu SMP Wed Dec 21 17:24:18 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: linux-image-4.8.0-34-generic 4.8.0-34.36 ProcVersionSignature: Ubuntu 4.8.0-34.36-generic 4.8.11 Uname: Linux 4.8.0-34-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: richard8045 F pulseaudio /dev/snd/controlC0: richard8045 F pulseaudio /dev/snd/seq:richard 16661 F chrome CurrentDesktop: Unity Date: Thu Jan 5 17:48:35 2017 HibernationDevice: RESUME=UUID=62fb18ad-c327-42f5-a69b-ae103a365f85 InstallationDate: Installed on 2014-12-03 (764 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1) MachineType: LENOVO 80H1 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.8.0-34-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.8.0-34-generic N/A linux-backports-modules-4.8.0-34-generic N/A linux-firmware1.161.1 SourcePackage: linux UpgradeStatus: Upgraded to yakkety on 2016-10-26 (71 days ago) dmi.bios.date: 09/28/2014 dmi.bios.vendor: LENOVO dmi.bios.version: B9CN12WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Lenovo Edge 15 dmi.board.vendor: LENOVO dmi.board.version: 31900058 WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo Edge 15 dmi.modalias: dmi:bvnLENOVO:bvrB9CN12WW:bd09/28/2014:svnLENOVO:pn80H1:pvrLenovoEdge15:rvnLENOVO:rnLenovoEdge15:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoEdge15: dmi.product.name: 80H1 dmi.product.version: Lenovo Edge 15 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-bug package-from-proposed yakkety -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1654445 Title: Acer, Inc ID 5986:055e device not functioning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1654445/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1433906] Re: Acer, Inc ID 5986:055a is useless after 14.04.2 installed.
I thought I had this same problem, but my camera is the 5986:055e ('e'
instead of 'a'), and it is still not working on kernel 4.8.0-34-generic
#36-Ubuntu.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1433906
Title:
Acer, Inc ID 5986:055a is useless after 14.04.2 installed.
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1433906/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1641380] Re: chromium-browser: ERR_CERTIFICATE_TRANSPARENCY_REQUIRED for Symantec certs
For those in a lurch because of this error, you can always install Chrome (the non-open-source version) and use it until this situation is cleared up. Chrome and Chromium seem to be able to exist side-by-side, and when this is resolved you can remove it or switch back to Chromium and just leave it for the next crisis. Not ideal, and definitely not for those who use Chromium to avoid proprietary software, but a workaround that lets you keep your workflow going without switching to Firefox. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1641380 Title: chromium-browser: ERR_CERTIFICATE_TRANSPARENCY_REQUIRED for Symantec certs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1641380/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1641380] Re: chromium-browser: ERR_CERTIFICATE_TRANSPARENCY_REQUIRED for Symantec certs
Fix in #11/#82 fixed it for me as well...at least for sites like Amazon. (Running 16.10) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1641380 Title: chromium-browser: ERR_CERTIFICATE_TRANSPARENCY_REQUIRED for Symantec certs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1641380/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1295267] Re: Windows change Monitor/Desktop after screen lock
Referring to comment #41: only partial success. I am still getting occasional window moves after locking the screen and walking away for a bit, though much less frequent. And there doesn't seem to be a correlation to being gone for five minutes or two hours. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1295267 Title: Windows change Monitor/Desktop after screen lock To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1295267/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1295267] Re: Windows change Monitor/Desktop after screen lock
I am having this issue when my laptop is connected to an external monitor and I am using both screens side-by-side. It just started happening after upgrade to 16.04. Was driving me nuts, but I just discovered (following a reading of comment #41) that if I go to System Settings -> Brightness and Lock and set "Turn screen off when inactive for" to "Never" (I had it set to 5 minutes), then the problem does not seem to occur--when I return to my computer, all of the application windows are where I left them. I would like to hear if this workaround resolves the issue for anyone else as well. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1295267 Title: Windows change Monitor/Desktop after screen lock To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1295267/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1583821] [NEW] Applications shuffling around on desktops after screen lock
Public bug reported: I use multiple desktops to organize open applications. Also, I am currently using multiple monitors. If I arrange my applications (e.g. Chrome on the laptop screen of desktop one, Geany on the attached monitor on desktop 1, another chrome on the laptop screen of desktop 2, another app on the attached monitor on desktop 2) and then lock the screen, when I unlock all of the applications have moved around. Sometimes they all move to desktop 1, sometimes they are resized and half off the screen. But they are rarely on the same screen and desktop that I left them on. This is new behavior since the latest version upgrade. Previously, applications stayed on the screens where I left them. Some requested info: $ lsb_release -rd Description:Ubuntu 16.04 LTS Release:16.04 apt-cache policy xorg xorg: Installed: 1:7.7+13ubuntu3 Candidate: 1:7.7+13ubuntu3 Version table: *** 1:7.7+13ubuntu3 500 500 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-22.39-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Thu May 19 17:17:20 2016 DistUpgraded: 2016-04-29 20:29:44,172 DEBUG icon theme changed, re-reading DistroCodename: xenial DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Lenovo Haswell-ULT Integrated Graphics Controller [17aa:3978] InstallationDate: Installed on 2014-12-03 (532 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1) MachineType: LENOVO 80H1 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-22-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to xenial on 2016-04-30 (19 days ago) dmi.bios.date: 09/28/2014 dmi.bios.vendor: LENOVO dmi.bios.version: B9CN12WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Lenovo Edge 15 dmi.board.vendor: LENOVO dmi.board.version: 31900058 WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo Edge 15 dmi.modalias: dmi:bvnLENOVO:bvrB9CN12WW:bd09/28/2014:svnLENOVO:pn80H1:pvrLenovoEdge15:rvnLENOVO:rnLenovoEdge15:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoEdge15: dmi.product.name: 80H1 dmi.product.version: Lenovo Edge 15 dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Tue May 17 10:15:01 2016 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id1103 vendor LGD xserver.version: 2:1.18.3-1ubuntu2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1583821 Title: Applications shuffling around on desktops after screen lock To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1583821/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1110787] Re: VPN tunnel connections are not properly setting MTU values
I am still seeing this problem in 14.10, even installed fresh on a new
laptop. I have found a workaround that takes care of the problem
automatically, though. There is a 1412 mtu hardcoded in /etc/vpnc/vpnc-
script, but that may not be relevant to network manager so I didn't mess
with that script. The NetworkManager man page notes that any scripts
placed in /etc/NetworkManager/dispatcher.d will run when network
connections go up and down, and that they will receive the name of the
interface and the action as parameters to the script. So I placed the
following script in that directory under the name 70vpnMtuCorrection
(the scripts run in alpha order, and there was already one more there so
I wanted this one to run later...but you can call it anything else you
like and it should still work). The script needs to be owned by root and
executable by all (so use sudo to save it and execute a chmod a+x on
the file). The script determines if the tun0 interface is coming up, if
we have a wlan0 connection, calculates the necessary mtu value, and
resets it if the MTU value needs to be decreased. This seems to be
handling my issue, but I would still prefer to see that it is handled
properly by network manager in the first place. But if you are having
the same problem, this should remove a pesky annoyance like it is doing
for me:
/etc/vpnc/vpnc-script/70vpnMtuCorrection:
#!/bin/bash
TUN0_INTERFACE_NAME=tun0
WLAN0_INTERFACE_NAME=wlan0
VPN_UP_ACTION_NAME=vpn-up
MTU_DIFFERENCE=78
INTERFACE_NAME=${1}
ACTION=${2}
if [ ${INTERFACE_NAME} != ${TUN0_INTERFACE_NAME} ]
then
exit 0
fi
if [ ${ACTION} != ${VPN_UP_ACTION_NAME}]
then
exit 0
fi
#Make sure we have a current TUN0 entry before we continue.
CURRENT_TUN0_MTU=`sudo ip link list | grep ${TUN0_INTERFACE_NAME}: | sed -r
s/.*mtu ([0-9]+).*/\1/`
if [ ${WLAN_MTU} == }
then
exit 0
fi
#Also make sure we have a current WLAN0 entry
WLAN_MTU=`sudo ip link list | grep ${WLAN0_INTERFACE_NAME}: | sed -r s/.*mtu
([0-9]+).*/\1/`
if [ ${WLAN_MTU} == }
then
exit 0
fi
NEW_TUN0_MTU=$((${WLAN_MTU} - ${MTU_DIFFERENCE}))
if [ ${NEW_TUN0_MTU} = ${CURRENT_TUN0_MTU} ]
then
exit 0
fi
ip link set ${TUN0_INTERFACE_NAME} mtu ${NEW_TUN0_MTU}
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1110787
Title:
VPN tunnel connections are not properly setting MTU values
To manage notifications about this bug go to:
https://bugs.launchpad.net/network-manager/+bug/1110787/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1238322] Re: gradle not working: symbol lookup error
I am having the same problem with oracle java 7. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1238322 Title: gradle not working: symbol lookup error To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gradle/+bug/1238322/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1238322] Re: gradle not working: symbol lookup error
Also: If I download the gradle 1.8 zip from the gradle website, unzip it into a directory, move to the bin directory, then type ./gradle, then gradle works without problems. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1238322 Title: gradle not working: symbol lookup error To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gradle/+bug/1238322/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 606238] Re: synaptic touchpad not recognized on dell latitude e6510 and others
The code version from comment #356 fixed my problems mentioned in comment #352. It works with Raring on the 3.8 kernel. I'm very happy because reverting to the supersensitive, nonscrolling touchpad I had before you wrote this driver was pretty unbearable. Thanks again for all of your work on this. When you say it has been accepted to the linux kernel, do you mean to say that at some point this will work out-of-the-box without installing the driver with DKMS? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/606238 Title: synaptic touchpad not recognized on dell latitude e6510 and others To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/606238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 606238] Re: synaptic touchpad not recognized on dell latitude e6510 and others
When I upgraded my N5110 to the raring ringtail beta last week, the touchpad was no longer recognized. I believe I had the 0.4 version installed. I uninstalled and removed all of the existing DKMS entries and installed the 1.3 version downloaded from http://www.dahetral.com /public-download but the touchpad is still not recognized. Has anyone been successful on an N5110 with this kernel? Any suggestions, or any tests I can perform to help resolve this? Some potentially helpful info: uname -a: Linux rbmlaptop 3.8.0-17-generic #27-Ubuntu SMP Sun Apr 7 19:39:35 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Some lines from dmesg: [8.279185] psmouse serio1: alps: E6 report: 00 00 64 [8.298297] psmouse serio1: alps: E7 report: 73 03 50 [8.316631] psmouse serio1: alps: EC report: 73 02 02 [8.319620] psmouse serio1: alps: ALPS: E7=73 03 50, EC=73 02 02 [8.319626] psmouse serio1: alps: Unknown ALPS touchpad: E7=73 03 50, EC=73 02 02 xinput: ⎡ Virtual core pointer id=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointerid=4[slave pointer (2)] ⎜ ↳ PS/2 Generic Mouseid=12 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Button id=6[slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ Power Button id=8[slave keyboard (3)] ↳ Sleep Button id=9[slave keyboard (3)] ↳ Laptop_Integrated_Webcam_HD id=10 [slave keyboard (3)] ↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)] ↳ Dell WMI hotkeys id=13 [slave keyboard (3)] dkms status: psmouse, alps-1.3, 3.8.0-17-generic, x86_64: installed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/606238 Title: synaptic touchpad not recognized on dell latitude e6510 and others To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/606238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1134525] [NEW] Network Manager Applet does not list VPN connections after login
Public bug reported: I use vpnc through network manager. When I start up my laptop, at the login screen the network manager finds my wifi connection and connects before login. That is all good. But when I log in and then click on the network manager applet to try and connect to a VPN connection, my VPN connections are not listed. The VPN Connections list is empty. If I disable and then re-enable wireless, the connections show up. I assume this is a permissions issue...The VPN connections list must be populated before I log in, and the connection I am looking for is not set to be available to all users. This is not a major issue, just a nuisance--I have to disconnect and reconnect wifi after login if I want to use the VPN, but that workaround takes care of the problem. I am on ubuntu 12.10 with an up-to-date system (3.5.0-25-generic #39-Ubuntu SMP Mon Feb 25 18:26:58 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux). Here are some other versions: network-manager 0.9.6.0-0ubuntu7 network-manager-gnome 0.9.6.2-0ubuntu6 network-manager-vpnc 0.9.6.0-0ubuntu1 network-manager-vpnc-gnome 0.9.6.0-0ubuntu1 ** Affects: network-manager-applet (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1134525 Title: Network Manager Applet does not list VPN connections after login To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager-applet/+bug/1134525/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1110787] [NEW] VPN tunnel connections are not properly setting MTU values
Public bug reported: I regularly connect to a cisco anyconnect vpn using vpnc through the network manager. I am often at various different location using wifi, including connecting via wifi to a cellular hotspot. Usually, when connecting to a WIFI connection the MTU value (on the wifi connection) is 1500. When connecting to the vpn, the MTU value of the tun0 connection is set automatically and it usually sets itself to something like 1412. This works with no problem. When the wifi connection has a lower MTU value (and the cellular hotspot usually has an MTU of 1430, as do connections in various coffee shops), the tun0 connection still sets itself to 1412. For read-intensive operations (e.g. accessing websites and downloading pages, pulling from a subversion repository) there is no apparent problem. But when attempting to post to a web page (for instance, writing a bug report in bugzilla) or commit to a repository over the VPN, the connection will fail. The MTU value for a VPN connections seems to want to be 78 less than the MTU value of the connection that it is working over, and having MTU greater than this causes the upload failures. I use the VPN via the network manager (using network-manager-vpnc and network-manager-vpnc-gnome). I am able to work around the issue by setting the MTU value of the VPN connection manually from the command line after connecting with the following command: sudo ifconfig tun0 mtu 1330 It is tedious to do this each time, but it does allow me to successfully upload or commit when connected. (I also find that RDP connections fail much less often when the MTU is set correctly.) I should note that I pick an MTU value that is 100 less than the MTU value of the WIFI connection--it should be 78 but I opt for the easier math and don't really notice the difference. And for those that don't know, you can find the current MTU value of your connections by issuing the ifconfig command. If you do not have access to a cellular hotspot or other wifi connection that has a low MTU value, it is likely you can replicate this issue by manually setting the primary network connection's MTU value to 1430 (using the above command) though I have not tried to replicate it under these conditions. Ideally, the VPN connection would properly calculate an appropriate MTU value to use with the network adapter it will be communicating over. Perhaps it is trying that and simply cannot identify the proper connection--while writing this it occurs to me that the eth0 connection has an MTU value of 1500 even though I don't have a network cable plugged in, but lowering the eth0 MTU value had no effect on the tun0 MTU value chosen when I connected to VPN over the WIFI connection. To replicate the error: * connect to a wifi connection that gives you an MTU value of 1430 * connect to VPN using vpnc via network manager * verify that the MTU value of your tun0 connection was set to 1412 * Attempt a large upload (a large file, a large bugzilla comment or other html form submission, or a sizeable svn commit) and it should fail Important version info requested: Ubuntu 12.10 vpnc is 0.5.3r512-2ubuntu1 network-manager, network-manager-vpnc, and network-manager-vpnc-gnome are all 0.9.6.0-ubuntu1 ** Affects: ubuntu Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1110787 Title: VPN tunnel connections are not properly setting MTU values To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1110787/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1064493] Re: Indicator-applet Disappears After Closing a Conversation
I am seeing this same behavior with indicators for SpiderOak and BlueProximity. Both have been whitelisted. These indicators are visible when I start the computer, but at some point they disappear (usually after I suspend and resume, but sometimes without a suspend). I can see the indicators if I use CTRL-ALT-ARROW to switch desktops, but only while the desktop switch is taking place...then they disappear again. I cannot access them at all. Other indicators (Remmina, dropbox, network manager, power, etc.) are unaffected (though sometimes the bluetooth icon is missing, though this might just be when it has no connection). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1064493 Title: Indicator-applet Disappears After Closing a Conversation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pidgin/+bug/1064493/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1064493] Re: Indicator-applet Disappears After Closing a Conversation
Also: entering unity from a command line to restart Unity restores the lost icons. Possibly interesting info: when the top panel is rebuilding, the two missing icons appear first all the way to the right and then the rest of the icons and clock, etc. are added. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1064493 Title: Indicator-applet Disappears After Closing a Conversation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pidgin/+bug/1064493/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 606238] Re: synaptic touchpad not recognized on dell latitude e6510 and others
Dave, I ran your 0.3 and it worked like a charm...no errors at all on either install or reboot. A few items of note: * The PS/2 mouse still appears in my xinput --list. Is that supposed to be the case? * After all the xinput setprops, I do have edge scrolling, but it works about 1/4 inch from the edge. The last 1/4 inch or so does nothing. I'm sure this is just an adjustment to be made somewhere, and it is not really noticeable. * As expected, there is no multitouch. But multiple touches (e.g. hitting with 2 fingers) does not cause any grief or erratic behavior, so it seems to be swallowed properly * I now have the touchpad tab in the mouse settings * I am now running on the 3.5.0-15-generic kernel. I don't think that makes any difference with the -14 kernel I was using before, but if midhat is still having issues it might be worth doing the sudo apt-get dist-upgrade to get this kernel upgrade and see if his problems disappear. In all, a great advance over the out-of-the-box experience I was having (on my Ubuntu Certified laptop). Thanks for all your efforts! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/606238 Title: synaptic touchpad not recognized on dell latitude e6510 and others To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/606238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 606238] Re: synaptic touchpad not recognized on dell latitude e6510 and others
* Do you get ANY errors/warnings when building the psmouse.ko dlkm? No errors or warnings. The build works fine. * What does modprobe -v report? It should be something like /lib/modules/3.2.0-30-generic/updates/dkms/psmouse.ko When I do the modprobe -v psmouse the crash happens. It happens immediately, and if there is any response from the modprobe command I can't see it. I tried sending it to a file with 1 and 2 to get stdout and errout, but no files were created. . * What OS and ver are your running? I am on Ubuntu 12.10 beta 64 bit. Here is the result of a uname-a: Linux rbmlaptop 3.5.0-14-generic #19-Ubuntu SMP Fri Sep 14 20:21:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux * Can you boot up into an Vista/Win7 or run a powerup diagnostic to confirm it's not a hardware issue? I don't have either installed--I am several years past the I might need Windows for something phase of switching to Linux so I just get rid of it--but I will try to find some diagnostics to run and report back if I can. * Eyeball the crash stack trace and look for any paths through a psmouse* or alps* function call. Each will have a hex offset. Email me what you see. The stack trace is the same as the images posted above in #174. I will take some photos and get you some offsets next time I try this. I may also try to install it on an earlier kernel and see if that makes a difference. Given midhat's similar experience, I think it might be related to the newer kernel and not hardware. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/606238 Title: synaptic touchpad not recognized on dell latitude e6510 and others To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/606238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 606238] Re: synaptic touchpad not recognized on dell latitude e6510 and others
Still getting crashes/hang on boot with this driver on my N5110. No
change from the 0.1 to the 0.2 version. Nothing for psmouse gets logged
in the syslog at all. Following the steps within the build_alps
function of the README file, all is well until I execute the sudo
modprobe -v psmouse. Then I am dropped out of X and see a stacktrace
(which I can't really copy because I have no interactivity left...have
to reboot at this point and then boot into an old kernel and do the
remove command).
Here is the DSDT info generated for the PS2 section:
Device (PS2)
{
Name (_HID, EisaId (DLL04B0))
Name (_CID, Package (0x03)
{
EisaId (SYN0600),
EisaId (SYN0002),
EisaId (PNP0F13)
})
Name (CRS, ResourceTemplate ()
{
IRQNoFlags ()
{12}
})
Method (_CRS, 0, NotSerialized)
{
Return (CRS)
}
}
Are those the same codes you get, or is this a different device?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/606238
Title:
synaptic touchpad not recognized on dell latitude e6510 and others
To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/606238/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 606238] Re: synaptic touchpad not recognized on dell latitude e6510 and others
I downloaded Dave's patch in #144 and followed the install instructions in #152. On reboot, my computer would freeze during boot with the ubuntu logo and the row of dots. Attempts to boot into recovery mode also did not complete, with freeze for a minute or so and then a stacktrace/dump scrolling by. I was able to boot into a previous kernel via GRUB with no problem, and this command successfully removed the patch from the primary kernel: sudo dkms remove -m psmouse -v alps-dst-0.1 --all The --all was necessary because I was booted into a different kernel than the one into which this was installed. I am on a Dell N5110 with Ubuntu 12.10 beta, x86_64, kernel 3.5.0-14. I am happy to reproduce and upload any log files that may help. My laptop is only a few months old, so it may be that Dell has decided to put a different (and even more incompatible) version of the ALPS trackpad in. If there is anything I can do to help test, please let me know. Otherwise I will watch here to see if you post updates and try those when they appear. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/606238 Title: synaptic touchpad not recognized on dell latitude e6510 and others To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/606238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 606238] Re: synaptic touchpad not recognized on dell latitude e6510 and others
Dave: the only thing you have to apologize for is that you don't live in Texas where I can buy you the beer you deserve for doing this. I am testing the new version now. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/606238 Title: synaptic touchpad not recognized on dell latitude e6510 and others To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/606238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 606238] Re: synaptic touchpad not recognized on dell latitude e6510 and others
Why don't bug trackers have +1 or like buttons? I would definitely click it for Dave Turvene! I will see if I can try it, but I am currently on 12.10 beta so I don't know if I want to over-experiment. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/606238 Title: synaptic touchpad not recognized on dell latitude e6510 and others To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/606238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 606238] Re: synaptic touchpad not recognized on dell latitude e6510 and others
While extreme sensitivity of the trackpad is not a huge deal while clicking around on websites or other non-typing-related activities, I am sure that many others are finding it as frustrating as I am to try and type more than three words without the cursor relocating itself because of an errant click. When I am typing something of more than a few words (such as this comment, for example), I usually disable the trackpad--it is very easy to do from the command line. First, do a xinput command to make sure that the pointer is showing up as a PS/2 Generic Mouse. (You can see this output in comment #120.) Assuming that is the name your trackpad shows up with, the command to disable it is: xinput set-int-prop 'PS/2 Generic Mouse' 'Device Enabled' 8 0 and to reenable, you just issue the following: xinput set-int-prop 'PS/2 Generic Mouse' 'Device Enabled' 8 1 I have these commands in scripts called disabletrackpad.sh and enabletrackpad.sh. Until this gets fixed (and when will that be?) I can use the scripts to disable and re-enable the trackpad so that I can type for long periods without going batsh*t crazy. I hope that helps others with this issue. Postscript: I see that Sam already put this info into comment #95...Perhaps this repeat will help someone find it. Perhaps having another entry in this bug will spur someone to fix it. ;-) And if I get around to writing a single script to toggle the enable flag, send a message to libnotify, and map it to a shortcut key, I will post all that here as well. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/606238 Title: synaptic touchpad not recognized on dell latitude e6510 and others To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/606238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1016458] Re: bluetoothd crashed with SIGABRT in raise()
*** This bug is a duplicate of bug 644524 *** https://bugs.launchpad.net/bugs/644524 Any chance we can make #644524 public? I think its private status is keeping the bug reporting from working correctly...when I get the crash I am never taken to the bug, and I can't reach it except by googling and finding these duplicates. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1016458 Title: bluetoothd crashed with SIGABRT in raise() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1016458/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 919109] Re: No tray icon in Unity
I am having this issue as well. The top-panel indicator icon appears at boot, but seems to disappear some time later. Right now, I am looking at dual monitors and the primary screen has the indicator icon in the top panel, while the secondary monitor does not have the icon. No other icons are missing on the secondary screen. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/919109 Title: No tray icon in Unity To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueproximity/+bug/919109/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 678103] Re: Dell Inspiron N Series, Touchpad recognised as generic PS/2 mouse
For Alessandro and others who have this working in Precise on an updated kernel: is there something other than installing the kernel upgrade that is necessary to make this work? Is there a config file that must be changed or some other action to take? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/678103 Title: Dell Inspiron N Series, Touchpad recognised as generic PS/2 mouse To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/678103/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 606238] Re: synaptic touchpad not recognized on dell latitude e6510 and others
No love with 3.4.0 kernel either (on 64 bit Ubuntu 12.04). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/606238 Title: synaptic touchpad not recognized on dell latitude e6510 and others To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/606238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 903236] Re: Touchpad incorrectly detected as PS/2 mouse on Dell Inspiron 15R N5110
I have a brand new 15R with a fresh install of Ubuntu 12.04 (currently on kernel version 3.2.0-24-generic with x86_64) and I am seeing the same thing--showing up as a PS/2 mouse. Buttons and the pointer work fine and are fully usable, but there are no touchpad configuration options and no multitouch scrolling or gestures.. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/903236 Title: Touchpad incorrectly detected as PS/2 mouse on Dell Inspiron 15R N5110 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/903236/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 946388] Re: Remmina full-screen mode does not work under Unity 3D
Kelvin's workaround in comment #6 did not work for me. The XP connection always opens in a windowed fullscreen mode instead of a fullscreen mode that takes up the whole screen. Even if I do the workaround I mention in #5 (connect to a non-XP computer that does not manifest the problem first, then connect to the XP computer), I get proper fullscreen on that connection but the problem still reappears with the next connection. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/946388 Title: Remmina full-screen mode does not work under Unity 3D To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/remmina/+bug/946388/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 917210] Re: compiz+unity3d generates 50 wakeups a second on idle system
I am having this issue, and I am up-to-date with all upgrades in the 12.04 beta. I have a HP Pavilion dv7 laptop with i7 quad core processor, AMD/fglrx video driver. Under unity 3d, when I lock the screen and it goes blank, the cpu and fan spin up. After unlocking and bringing the screen back up, the fan spins down. It looks like compiz or X is the process cranking up the CPU (given that I am looking at top and powertop just after logging back in, it is a bit like trying to figure out if the refrigerator light actually goes off when you close the door, but I think compiz is the culprit). In any case, this happens consistently under unity3d, but not under unity 2d. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/917210 Title: compiz+unity3d generates 50 wakeups a second on idle system To manage notifications about this bug go to: https://bugs.launchpad.net/compiz-core/+bug/917210/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 946388] Re: Remmina full-screen mode does not work under Unity 3D
I am seeing this as well but, oddly, only on specific connections. And always to the same connections. I can't find any differences in settings for the client between the connections that work properly and the connections that don't work properly. I see this from my laptop, which has been upgraded to 12.04 beta through several versions as well as on my desktop, which has a fresh install of 12.04 beta. If I connect to the bad connection with no other connections open, it does the non-fullscreen mode, and all additional connections are in non- fullscreen mode. If I connect to one of the good connections first, I get fullscreen mode, and all additional connections (including the bad connection) are in fullscreen mode. It appears that the workaround to this problem is to connect to a remote computer that works with fullscreen mode first, then to connect to the bad connection second and disconnect the first. One more note: the bad connection is a windows XP computer. All of the other connections are win7 or server 2003. I'm not sure if this happens universally with XP because I don't have another instance to test it on, but I don't see it happening on any other flavor of Windows that I access. (Please don't hate me because I am forced to use Windows at work!) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/946388 Title: Remmina full-screen mode does not work under Unity 3D To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/remmina/+bug/946388/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 956721] Re: Unity panel: all top right indicators disappear
This morning's update in 12.04 beta seems to have fixed the problem for me. Top-right indicators are back and functioning normally. My screen looked like Kearny's screenshot from comment #7, though the pictures of my kids look much better than that red barn he has on his desktop ;). I still have the same HUD problem indicated in #6, though I have never messed with my xsession.d folder and I don't see menuproxy in there at all. But that is probably another bug...if anyone knows a bug number for that please indicate it here. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/956721 Title: Unity panel: all top right indicators disappear To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/956721/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 913464] Re: rabbit creates new PAM session
I am seeing what I believe is this bug. I am unable to shutdown without first executing sudo service rabbitmq-server stop to shut down the rabbitmq server. Unless I do this, instead of shutting down I am just returned to the lightdm login screen over and over. This happened both in 11.10 and in 12.04 beta. I am using rabbitmq- server package version 2.7.1-0ubuntu1. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to rabbitmq-server in Ubuntu. https://bugs.launchpad.net/bugs/913464 Title: rabbit creates new PAM session To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rabbitmq-server/+bug/913464/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 913464] Re: rabbit creates new PAM session
I am seeing what I believe is this bug. I am unable to shutdown without first executing sudo service rabbitmq-server stop to shut down the rabbitmq server. Unless I do this, instead of shutting down I am just returned to the lightdm login screen over and over. This happened both in 11.10 and in 12.04 beta. I am using rabbitmq- server package version 2.7.1-0ubuntu1. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/913464 Title: rabbit creates new PAM session To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rabbitmq-server/+bug/913464/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 838577] Re: GNOME Shell display problems with FGLRX
I had some success with 11.12 as well. I can't declare full victory because I am having trouble using dual monitors with it--seeing some problems with Gnome Shell that I am not seeing under unity such as flickering and freezing (sometimes only on the external monitor). But in general, I can use Gnome Shell with this version. I downloaded the driver directly from AMD at http://support.amd.com/us/gpudownload/linux/Pages/radeon_linux.aspx. I followed these instructions, which were somewhat simpler than others I have seen (though it doesn't do all of the uninstalling that some of the other instruction sets I have seen do), to install it: http://mygeekopinions.blogspot.com/2011/06/how-to-install-atiamd- catalyst-linux.html Obviously I substituted the current filenames for the older ones in the instructions. But install and reboot and I was able to see Gnome Shell with perfect clarity, not with garbled menus and crazy stripes, etc. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/838577 Title: GNOME Shell display problems with FGLRX To manage notifications about this bug go to: https://bugs.launchpad.net/fglrx/+bug/838577/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 849415] Re: gnome-alsamixer crashed with SIGSEGV in gtk_accel_group_connect_by_path()
Today's update fixed the problem for me...gnome-alsamixer now runs without crashing. I had not previously applied any patches, so this definitely provided the fix. Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/849415 Title: gnome-alsamixer crashed with SIGSEGV in gtk_accel_group_connect_by_path() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-alsamixer/+bug/849415/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 808407] Re: battery indicator missing
I have this same problem in beta 2. I don't see a battery indicator or way to set the battery indicator as always show. I am running on a HP Pavilion dv7 laptop with Oneiric Beta 2 64 bit, upgraded from Natty. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/808407 Title: battery indicator missing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-power-manager/+bug/808407/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 841872] Re: Using the task switcher, hard to cycle through different terminals
I like the ALT + ` switching...I didn't know about it either. But I have an issue that seems to fall under this bug. When I have several windows open including multiple terminal windows, if I alt-tab to the terminals the wrong one is active. Terminal A sits behind Terminal B, but Terminal A has the active cursor and accepts keyboard input. I use transparency in the terminals, otherwise I probably wouldn't have known what was going on. The ALT+` switching lets me pick the proper one--when I switch between them with this key combo the active one comes back to the front. Also, when I use ALT+TAB to pick a specific instance of the terminal (Hit ALT+TAB, pause on the icon for the terminals and wait for the multiple ones to show up or press the down arrow to get to selections, then select the one I want) they end up in the correct z-order with the active one on top. To recreate: open a few windows (I have chromium, home folder, and Geany open) along with two terminal window instances. Go to the browser and ALT+TAB to the terminal icon. The active terminal is not in the front. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/841872 Title: Using the task switcher, hard to cycle through different terminals To manage notifications about this bug go to: https://bugs.launchpad.net/ayatana-design/+bug/841872/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 675108] Re: gnome-power-manager adds battery to indicator twice when battery hot-unplugged and plugged back in
This has fixed the duplicate problem. I still see the (estimating...) instead of a battery time remaining when I click on the battery icon in the panel. I am waiting to see if that resolves itself after the g-p-m collects more data or if this issue still remains. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/675108 Title: gnome-power-manager adds battery to indicator twice when battery hot- unplugged and plugged back in To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-power/+bug/675108/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 777554] Re: coffeescript fails to find nodejs in path
I was also able to workaround with a link in /usr/bin: sudo ln -s /usr/bin/node /usr/bin/nodejs This creates the link globally, which may be the source for other grief later on. But it lets coffee work. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/777554 Title: coffeescript fails to find nodejs in path To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coffeescript/+bug/777554/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 770380] Re: power meter panel icon shows duplicated information
I am seeing this as well on an HP Pavilion DV7. In addition to the duplicate line (which appears after I unplug the power cord), I always see estimating... instead of a time to charge or discharge (though this worked under Maverick, which I updated from). This behavior began when I updated from Maverick to Natty Beta 1. Also, I have seen rare cases where the gnome-power-manager starts consuming about 80% cpu, and it only stops when I kill the process--but I have not seen a particular cause of this behavior, and I don't have any idea whether this is related. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/770380 Title: power meter panel icon shows duplicated information -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 767498] Re: package apport 1.20.1-0ubuntu3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
I wrote in comment #54 that I saw no additional problems, but I should add that on my next upgrade (I used update-manager, if that matters to anyone) I got a warning about needing a partial upgrade. I performed the partial upgrade and everything processed without issues. I don't see any signs of problems now. For the record, I didn't do the workaround with enabled mentioned in #53. It may not be necessary with the latest version of apport being installed--it would be useful for others if those experiencing this error tried an upgrade without changing the file and posted whether or not the file change was necessary. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/767498 Title: package apport 1.20.1-0ubuntu3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 767498] Re: package apport 1.20.1-0ubuntu3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
I just did an update and an upgrade and a new version of apport and apport-gtk were available. The problem was resolved, though the upgrade did throw a warning that apport failed to start. I rebooted, and all seems well. I was able to launch apport-gtk from the command line, so I think it is functioning normally. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/767498 Title: package apport 1.20.1-0ubuntu3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 759898] Re: Startup Application shows up with menu and bad location
Not sure what has been updated to affect this, but now the terminal menu is integrated into unity. But the window location is still incorrect...title bar is hidden under the top panel and flush with the top edge of the screen. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/759898 Title: Startup Application shows up with menu and bad location -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 759898] [NEW] Startup Application shows up with menu and bad location
Public bug reported: Binary package hint: unity For dealing with an earlier bug I added a gnome terminal to my startup applications--Unity was not loading properly and this allowed me to do a clean shutdown. Now Unity is working properly, but I still have the Gnome Terminal in my startup applications (select system settings and it is Startup Applications under the Personal category. When I log in, the terminal starts as expected, but it has its own menu bar (i.e. not integrated with the unity panel) and it is placed flush with the top of the screen (i.e. with the window's title bar behind the top panel). Everything is fully functional, and I can use the ALT- click-drag combo to move it out of the way. If I close the terminal and start a new one, the menu is integrated into the unity panel and it opens in the right place (just below, not behind, the top panel). Again, everything is fully functional, it just appears that the app from the startup applications is not properly integrated into unity. I assume all this info was transmitted, but I am on Natty 11.04 beta, and all packages are up to date as of the time of this filing. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: unity 3.8.6-0ubuntu1 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 CompizPlugins: [core,bailer,detection,composite,opengl,decor,regex,animation,grid,imgpng,vpswitch,unitymtgrabhandles,move,compiztoolbox,gnomecompat,mousepoll,place,resize,workarounds,session,wall,wobbly,expo,ezoom,staticswitcher,fade,scale,unityshell] CompositorRunning: compiz Date: Wed Apr 13 09:55:46 2011 DistUpgraded: Log time: 2011-03-31 22:23:06.607321 DistroCodename: natty DistroVariant: ubuntu DkmsStatus: psmouse, 2.6.35-22-generic, 2.6.35-24-generic, x86_64: built fglrx, 8.840, 2.6.38-8-generic, x86_64: installed fglrx, 8.840, 2.6.38-7-generic, x86_64: installed virtualbox-ose, 4.0.4, 2.6.38-8-generic, x86_64: installed virtualbox-ose, 4.0.4, 2.6.38-7-generic, x86_64: installed EcryptfsInUse: Yes ExecutablePath: /usr/bin/compiz-decorator GraphicsCard: ATI Technologies Inc Redwood [Radeon HD 5600 Series] [1002:68c1] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1449] InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429) InstallationMedia_: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429) InstallationMedia__: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429) InstallationMedia___: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429) InterpreterPath: /bin/dash JockeyStatus: xorg:fglrx - ATI/AMD proprietary FGLRX graphics driver (Proprietary, Enabled, In use) MachineType: Hewlett-Packard HP Pavilion dv7 Notebook PC ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=59ba328b-3b67-4815-81de-8488735fba83 ro quiet splash vt.handoff=7 ProcVersionSignature_: Ubuntu 2.6.38-8.42-generic 2.6.38.2 ProcVersionSignature__: Ubuntu 2.6.38-8.42-generic 2.6.38.2 ProcVersionSignature___: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Renderer: Unknown SourcePackage: unity UpgradeStatus: Upgraded to natty on 2011-04-11 (2 days ago) dmi.bios.date: 05/17/2010 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.07 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1449 dmi.board.vendor: Hewlett-Packard dmi.board.version: 65.19 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnHewlett-Packard:bvrF.07:bd05/17/2010:svnHewlett-Packard:pnHPPaviliondv7NotebookPC:pvr048D10242B202:rvnHewlett-Packard:rn1449:rvr65.19:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dv7 Notebook PC dmi.product.version: 048D10242B202 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.4+bzr20110411-0ubuntu1 version.fglrx-installer: fglrx-installer N/A version.ia32-libs: ia32-libs 20090808ubuntu12 version.libdrm2: libdrm2 2.4.23-1ubuntu6 version.libgl1-mesa-dri: libgl1-mesa-dri 7.10.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 7.10.2-0ubuntu1 version.xserver-xorg: xserver-xorg 1:7.6+4ubuntu3 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.0-0ubuntu4 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.14.0-4ubuntu7 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20110107+b795ca6e-0ubuntu7 ** Affects: unity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 natty running-unity ubuntu unity-2d -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/759898 Title: Startup Application shows up with menu and bad location -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com
[Bug 759898] Re: Startup Application shows up with menu and bad location
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/759898 Title: Startup Application shows up with menu and bad location -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 753923] [NEW] package branding-ubuntu 0.5 failed to install/upgrade: trying to overwrite '/usr/share/gnome-games/quadrapassel/pixmaps/quadrapassel.svg', which is also in package quadrapassel 1:2.
Public bug reported: Binary package hint: branding-ubuntu reported a conflict with existing package ProblemType: Package DistroRelease: Ubuntu 11.04 Package: branding-ubuntu 0.5 ProcVersionSignature: Ubuntu 2.6.38-8.41-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Thu Apr 7 11:36:22 2011 Dependencies: ErrorMessage: trying to overwrite '/usr/share/gnome-games/quadrapassel/pixmaps/quadrapassel.svg', which is also in package quadrapassel 1:2.32.1-0ubuntu3 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429) PackageArchitecture: all SourcePackage: branding-ubuntu Title: package branding-ubuntu 0.5 failed to install/upgrade: trying to overwrite '/usr/share/gnome-games/quadrapassel/pixmaps/quadrapassel.svg', which is also in package quadrapassel 1:2.32.1-0ubuntu3 UpgradeStatus: Upgraded to natty on 2011-04-01 (6 days ago) ** Affects: branding-ubuntu (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package natty unity-2d -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/753923 Title: package branding-ubuntu 0.5 failed to install/upgrade: trying to overwrite '/usr/share/gnome- games/quadrapassel/pixmaps/quadrapassel.svg', which is also in package quadrapassel 1:2.32.1-0ubuntu3 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 753923] Re: package branding-ubuntu 0.5 failed to install/upgrade: trying to overwrite '/usr/share/gnome-games/quadrapassel/pixmaps/quadrapassel.svg', which is also in package quadrapassel 1:2.32
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/753923 Title: package branding-ubuntu 0.5 failed to install/upgrade: trying to overwrite '/usr/share/gnome- games/quadrapassel/pixmaps/quadrapassel.svg', which is also in package quadrapassel 1:2.32.1-0ubuntu3 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 745996] Re: All unity windows are invisible (panel, launcher, dash)
Compiz update today has resolved this problem for me. All panels are now visible and work fine. For the first time since installing the Beta a few days ago I have 3D Unity working properly. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/745996 Title: All unity windows are invisible (panel, launcher, dash) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 745996] Re: All unity windows are invisible (panel, launcher, dash)
Just upgrade and reboot. I also had a few Margaritas at dinner. With salt. That may have helped as well. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/745996 Title: All unity windows are invisible (panel, launcher, dash) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 751520] [NEW] package gstreamer0.10-plugins-ugly 0.10.17-1 failed to install/upgrade: trying to overwrite '/usr/share/locale/af/LC_MESSAGES/.mo', which is also in package gstreamer0.10-plugins-ba
*** This bug is a duplicate of bug 751343 *** https://bugs.launchpad.net/bugs/751343 Public bug reported: Error occurred during upgrade using update-manager while in Unity 2d. ProblemType: Package DistroRelease: Ubuntu 11.04 Package: gstreamer0.10-plugins-ugly 0.10.17-1 ProcVersionSignature: Ubuntu 2.6.38-7.39-generic 2.6.38 Uname: Linux 2.6.38-7-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Tue Apr 5 09:57:20 2011 ErrorMessage: trying to overwrite '/usr/share/locale/af/LC_MESSAGES/.mo', which is also in package gstreamer0.10-plugins-bad 0.10.21-1ubuntu10 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429) SourcePackage: gst-plugins-ugly0.10 Title: package gstreamer0.10-plugins-ugly 0.10.17-1 failed to install/upgrade: trying to overwrite '/usr/share/locale/af/LC_MESSAGES/.mo', which is also in package gstreamer0.10-plugins-bad 0.10.21-1ubuntu10 UpgradeStatus: Upgraded to natty on 2011-04-01 (4 days ago) ** Affects: gst-plugins-ugly0.10 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package natty unity-2d -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/751520 Title: package gstreamer0.10-plugins-ugly 0.10.17-1 failed to install/upgrade: trying to overwrite '/usr/share/locale/af/LC_MESSAGES/.mo', which is also in package gstreamer0.10-plugins-bad 0.10.21-1ubuntu10 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 751520] Re: package gstreamer0.10-plugins-ugly 0.10.17-1 failed to install/upgrade: trying to overwrite '/usr/share/locale/af/LC_MESSAGES/.mo', which is also in package gstreamer0.10-plugins-bad
*** This bug is a duplicate of bug 751343 *** https://bugs.launchpad.net/bugs/751343 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/751520 Title: package gstreamer0.10-plugins-ugly 0.10.17-1 failed to install/upgrade: trying to overwrite '/usr/share/locale/af/LC_MESSAGES/.mo', which is also in package gstreamer0.10-plugins-bad 0.10.21-1ubuntu10 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 751343] Re: package gstreamer0.10-plugins-ugly 0.10.17-1 failed to install/upgrade: trying to overwrite '/usr/share/locale/af/LC_MESSAGES/.mo', which is also in package gstreamer0.10-plugins-bad
I ran update-manager again and the package installed without incident. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/751343 Title: package gstreamer0.10-plugins-ugly 0.10.17-1 failed to install/upgrade: trying to overwrite '/usr/share/locale/af/LC_MESSAGES/.mo', which is also in package gstreamer0.10-plugins-bad 0.10.21-1ubuntu10 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 745996] Re: All unity windows are invisible (panel, launcher, dash)
I am seeing this as well. Can't see a side panel, only the drop shadow for top panel. I can still click the invisible top and get menus (e.g. power, wifi connections, etc.). What info do you need to confirm it is the same issue? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/745996 Title: All unity windows are invisible (panel, launcher, dash) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 308191] Re: Multitouch support not available for Synaptics touchpads v7.2
With the 1.1.1 version installed on my HP Pavilion dv7, the two fingered scroll is now available and works like a charm! The right-button patch from bug #582809 doesn't appear to be compatible, but I haven't tried installing the right button patch first and then this package. I do not have a working right button. Jumpiness appears to be gone as well, though if both palms rub the touchpad while typing it does scroll. The sensitivity seems to be better as well. I need to play with the settings (xinput list-props 'SynPS/2 Synaptics TouchPad') to see if there is some improvement to be had, but generally this works great. One other item: I do not have click and drag. I can double-tap (e.g. on a window title bar) and drag it around, but I cannot click the left button with one finger and drag around with the other. I am sure I will find a combo of settings that works well, though. The missing items are worth it to be able to type without the cursor jumping around! (Though with current settings it still picks up a palm as a click and moves the cursor occasionally.) To others reading: if you try this it is helpful to post your results, including your laptop model info, so that fellow trackpad sufferers googling for an answer can find this bug. Great work...thanks, Henrik! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/308191 Title: Multitouch support not available for Synaptics touchpads v7.2 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 308191] Re: Multitouch support not available for Synaptics touchpads v7.2
I should add that (without changing any settings) I am getting right click functionality if I double-tap with two fingers. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/308191 Title: Multitouch support not available for Synaptics touchpads v7.2 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 308191] Re: Multitouch support not available for Synaptics touchpads v7.2
One final note on right-button functionality and then I stop bugging you: The strip across the bottom area of my trackpad is a button. Clicking anywhere on that button (right or left) with one finger is a left-click and clicking anywhere with two fingers is a right click. Theoretically, clicking with three fingers is a middle click, but I haven't tested this. The upshot is that this patch enabling multitouch has given me full functionality on the trackpad. I will raise a glass to Henrik at my next opportunity. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/308191 Title: Multitouch support not available for Synaptics touchpads v7.2 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 582809] Re: Synaptics Clickpad touchpad buttons are not working
Following the instructions as graciously compiled by Johanna in comment #94 has restored the right button functionality on my Hp Pavilion dv7-4073nr under Ubuntu 10.10 (which disappeared when upgrading from 10.04 like others have noted). I still have random movements as my palm brushes the pad, but at least I am not going insane trying to press the right button on a tiny area at the corner. Thanks to all for the work on this! I find a jumpy cursor value of 250 works well for me on this model. Also, for those like me that don't have SMHConfig on, I can test changing configuration values on the fly with commands like: xinput set-int-prop 'SynPS/2 Synaptics TouchPad' 'JumpyCursorThreshold' 8 200 The 8 is the size of the 200 value, and the appropriate values and options can be gleaned from the man page of synaptics. -- Synaptics Clickpad touchpad buttons are not working https://bugs.launchpad.net/bugs/582809 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 480605] Re: Repeated subscription request from same user
I get this issue with Yahoo, though I am not getting requests through any other services so I don't know if it is Yahoo only. The same thing is happening on my Nokia N900 running empathy on Maemo. No matter how many times I reject the request, it keeps popping up on both platforms until I log into Yahoo messenger (as in comment #18) and reject the request. I don't think the requester is spamming me (i.e. I know they are spamming in that they are strangers who want to sell me porn and vitamin supplements, but I don't think they are repeatedly requesting over and over); I think that the single request is simply not rejected properly from the empathy client. I am running Lucid, with empathy version 2.30.2. -- Repeated subscription request from same user https://bugs.launchpad.net/bugs/480605 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 420999] Re: [karmic] Network manager add DNS servers only once for mobile broadband
I have had this problem as well with ATT broadband and a Sierra Wireless USBConnect 881 on a fresh install of Karmic. I was previously using Jaunty and had no problems, and upgrading Jaunty to Karmic caused no problems. A fresh install of Karmic exhibited this behavior. Everything seemed to work fine on the connection to ATT broadband, I couldn't reach any websites. (Once or twice, the connection seemed to work fine, but there was no apparent commonality to any actions I had taken to get it to work.) Disconnecting, unplugging, rebooting, and restarting network manager seemed to have no effect. After reading this bug, I checked my /etc/resolv.conf file and found that it had no entries in it. I added an entry for nameserver with the first ip address on the opendns site and everything began working fine, even after disconnect and reconnect. By doing the following, I was able to add DNS entries to the connection so that it works consistently: Right click on the network manager icon in the top panel, and select Edit Connections... Choose the Mobile Broadband tab. Select the ATT Data Connect entry and click the Edit button. (an editing dialog appears) Choose the IPv4 Settings tab Change Method to Automatic (PPP) addresses only Enter your nameserver ip addresses in DNS Servers, separated by a comma or semicolon. I entered the opendns entries as follows: 208.67.222.222, 208.67.220.220 but you should check their website and see if these are appropriate for you. If I can dig out the ATT nameserver ip addresses, I may change to them, though opendns seems to work well so far. I don't know what the overall problem is or if this helps resolve it (or if it has already been resolved!), but I hope this info will help anyone who has a similar problem. -- [karmic] Network manager add DNS servers only once for mobile broadband https://bugs.launchpad.net/bugs/420999 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
