Just to add to this that I've just installed 8.10 and the dinovo
mouse/keyboard work fine (after pressing the appropriate connect
buttons).
My only gripe is that there is a very bad lag on the mouse pointer - it
slowly follows the physical mouse, requiring the hand to always
compensate.
On the
I've just spent a little more time trying to work out what the issue is.
I had a pretty loaded machine a couple of days ago.
I've booted up. I have two mice attached to the machine, one dinovo the
other a usb mouse. The usb mouse works fine and fast. The dinovo mouse
exhibits the following:
1.
Update
It's now 4 hours later than my last post and the juddering seems to have
disappeared - not too sure what to put it down to. It's a big machine
with dualcore, so it can't be processing power.
Anyhow, if it returns I'll leave another post.
Thanks again
Cheers
Nick
--
Bluetooth Logitech
this bug still exists as I have seen reports back to
05? I'd like to see USB2.0 speeds again...
Buzz
--
USB device not accepting address: error -110
https://bugs.launchpad.net/bugs/54273
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu
as a boot option.
Buzz
--
Blank ttys when using vesafb (vga=xxx)
https://bugs.launchpad.net/bugs/129910
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com
I did not realize this was a bug. I always had my virtual consoles at
VGA quality, not realizing that higher resolutions were possible, until
I experimented with different distros. When I started messing with
vga=XXX I got the blank screens.
The process below, similar to others, gets 1024x768
My output.
Sorry if this is redundant or not appropriate--this is my first bug
report post evar.
Cheers,
buzz
** Attachment added: gpgp-bugreport.txt
http://launchpadlibrarian.net/11087285/gpgp-bugreport.txt
--
Gnomepgp crashes when exporting key
https://bugs.launchpad.net/bugs/33930
You
I have the same problem with krusader. Also, I get a similar problem
with okular. Running compiz in GNOME.
Qt: 4.4.3
KDE: 4.2.00 (KDE 4.2.0)
Okular: 0.8
--
Krusader2 starts without window decorations with compiz
https://bugs.launchpad.net/bugs/322665
You received this bug notification because
** Attachment added: p560-hal.patch
http://launchpadlibrarian.net/24829987/p560-hal.patch
--
Samsung P560 function keys fix
https://bugs.launchpad.net/bugs/355542
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Public bug reported:
Binary package hint: hal
In order to get the Samsung P560 function keys working, 30-keymap-
misc.fdi has to be adjusted with the simple attached patch. Just add
P560 to the NC10 line. With this patch most of the keys are working,
except that some keys do not send a key
Just to send a notice that it works on my P560 and i filled a hal bug
report in order to support the function keys out-of-the-box.
Bug #355542 - Samsung P560 function keys fix
--
Samsung P560 brightness keys block keyboard and produce all-or-nothing effect
Public bug reported:
There are numerous new quirk entries in the current uvc driver within
the latest kernel. Please backport them in order to support many webcams
out of the box.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
Backport latest uvc quirks
I am talking about the uvc_ids list in uvc_driver.c, which contains some
new webcam information. At the moment i've got a 174f:5931 webcam
(Samsung Q310/P560/P210/...) which only works via
UVC_QUIRK_STREAM_NO_FID. It would be nice to add these information in
order to get a more out-of-the-box
describe is usually a connection issue in my experience,
try moving the receiver closer to the mouse itself (using a USB
extension cable for example) and make certain that no other 2.4ghz
sources can interfere with the dongle
On Thu, Nov 6, 2008 at 6:19 PM, buzz [EMAIL PROTECTED] wrote:
I've
Confirmed for Ubuntu Netbook Remix 9.10
--
nm-applet fails when another user is logged in
https://bugs.launchpad.net/bugs/284596
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I have written some scripts which make the brightness works with osd
notifications for nvidia cards, just send me a email :)
--
Samsung P560 brightness keys block keyboard and produce all-or-nothing effect
https://bugs.launchpad.net/bugs/338182
You received this bug notification because you are
The problem is within the anjuta source code. Anjuta tries to start
anjuta_launcher, but the filename is called anjuta-launcher. Symlink
/usr/bin/anjuta-launcher to /usr/bin/anjuta_launcher fixes this problem.
** Changed in: anjuta (Ubuntu)
Status: New = Confirmed
--
Wrong Warning and
Public bug reported:
Binary package hint: amsynth
Description:Ubuntu 9.10
Release:9.10
-
amsynth:
Installed: 1.2.0-4
Candidate: 1.2.0-4
Version table:
*** 1.2.0-4 0
500 http://us.archive.ubuntu.com karmic/universe Packages
Public bug reported:
Binary package hint: gvfs
Since Karmic there is no automount/password dialog for my encrypted
external harddisc.
1) Description: Ubuntu karmic (development branch)
Release:9.10
2) gvfs:
Installiert: 1.4.0-0ubuntu1
Kandidat: 1.4.0-0ubuntu1
Versions-Tabelle:
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/33460327/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/33460328/CurrentDmesg.txt
** Attachment added: DKDisksMonitorLog.txt
http://launchpadlibrarian.net/33460329/DKDisksMonitorLog.txt
As this bug also happens with my external harddrive i posted a new bug
report via the ubuntu-bug tool:
https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/448984
--
external harddrive (luks encrypted) will not mount automatically
https://bugs.launchpad.net/bugs/428435
You received this bug
b...@buzz-laptop:~$ sudo blkid -c /dev/null /dev/sdb1
b...@buzz-laptop:~$
b...@buzz-laptop:~$ apt-cache policy cryptsetup
cryptsetup:
Installiert: 2:1.0.6+20090405.svn49-1ubuntu4
Kandidat: 2:1.0.6+20090405.svn49-1ubuntu4
Versions-Tabelle:
*** 2:1.0.6+20090405.svn49-1ubuntu4 0
500
Debugging the libblkid revealed that the probe functions detects two
filesystem magics on the device.
luks and ext4
as the blkid is set to be not tolerant it aborts the probe and sends a
null pointer. if i change blkid to be tolerant it works fine, it shows
me the password dialog and mounts the
i would do the next steps private via email if thats fine for you?
--
external harddrive (luks encrypted) will not mount automatically
https://bugs.launchpad.net/bugs/428435
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
This bug has been discussed at the mailing list of util-linux:
http://thread.gmane.org/gmane.linux.utilities.util-linux-
ng/2563/focus=2565
The problem here are devices which have been created with old versions
of cryptsetup, new versions wipe out the whole superblock data. At the
moment there is
I am confirming this bug, running the latest karmic version. Its rather
strange to see a whole document preview, instead of the selected pages.
--
print preview is incorrect
https://bugs.launchpad.net/bugs/328430
You received this bug notification because you are a member of Ubuntu
Bugs, which
Confirmed! Please remove longhaul support from in-build kernel as it
makes my via epia to freeze at random time.
** Changed in: ubuntu
Status: New = Confirmed
** Package changed: ubuntu = linux (Ubuntu)
--
longhaul is loaded despite being reported broken
Thanks for the information. ALS support has been recently integrated to
the kernel and will be there in one of the next releases.
Anyway, all stuff that needs to be done is to integrate this key-up-
fake-event into the kernel. Everything else works fine.
--
Samsung P560 brightness keys block
System: Samsung P560
Video Hardware: nVidia Corporation G96 [GeForce 9600M GS] (rev a1)
Video Drivers: nvidia (closed source)
Compiz: enabled/disabled
Compiz doesn't effect this bug, it crashes in both cases
** Changed in: anjuta (Ubuntu)
Status: New = Confirmed
--
Anjuta kills X in
Ok, found the bug within the run-plugin source code and will post a
patch for it.
In the meantime just symlink anjuta-launcher to anjuta_launcher.
--
Anjuta kills X in Karmic
https://bugs.launchpad.net/bugs/434686
You received this bug notification because you are a member of Ubuntu
Bugs, which
** Attachment added: Fixes dialog handling
http://launchpadlibrarian.net/32785081/run-plugin.patch
** Changed in: anjuta (Ubuntu)
Status: New = Fix Committed
--
[karmic] anjuta run application dialog button not working
https://bugs.launchpad.net/bugs/434694
You received this bug
** Attachment added: Fixes anjuta launcher command name
http://launchpadlibrarian.net/32785065/run-execute.patch
** Changed in: anjuta (Ubuntu)
Status: Confirmed = Fix Committed
--
Anjuta kills X in Karmic
https://bugs.launchpad.net/bugs/434686
You received this bug notification
debdiff:
* Fixes X server crash on killing program (LP: #434686)
* Fixes segmentation faults in symbol-db on startup
* Fixes no-button action in re-run dialog (LP: 434694)
** Attachment added: anjuta_2.28.0.0-0ubuntu2.debdiff
Debdiff for bug is included in bugreport (LP: #434686).
--
[karmic] anjuta run application dialog button not working
https://bugs.launchpad.net/bugs/434694
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
** Attachment added: Corrected version
http://launchpadlibrarian.net/32873684/anjuta_2.28.0.0-0ubuntu2.debdiff
--
Anjuta kills X in Karmic
https://bugs.launchpad.net/bugs/434686
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Solution: Install 2.6.32rcX kernel from ppa and add the following line
echo 130-132,134,136-137,179,247,249
/sys/devices/platform/i8042/serio0/force_release
to /etc/rc.local
--
Samsung P560 brightness keys block keyboard and produce all-or-nothing effect
https://bugs.launchpad.net/bugs/338182
At the moment i'm using rc4 and rc7, doesn't matter at all. This is a
new feature that will remain in the kernel.
Please check
* for the file /sys/devices/platform/i8042/serio0/force_release
* that you entered the line as complete line, without linebreak.
* that you entered the line before
Valgrind log file attached
** Attachment added: valgrind.log.gz
http://launchpadlibrarian.net/24581612/valgrind.log.gz
--
ekiga crashed with SIGSEGV in free()
https://bugs.launchpad.net/bugs/352342
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I have had this bug since 7.04. I am running 8.10 now, and uname -a is
Linux buzz-CP-ubuntu 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:06 UTC 2008 x86_64
GNU/Linux
I have attached dmesg output, but the lines about my mouse only occur
after I type lsusb. There is nothing in dmesg until I type
Attached is my dmesg.
** Attachment added: dmesg
http://launchpadlibrarian.net/25295718/dmesg
--
usb mouse inactive until i run lsusb
https://bugs.launchpad.net/bugs/299288
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
--
Is this a duplicate of bug 54273?
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.15/+bug/54273
when I run 'sudo modprobe -r ehci_hcd' I can unplug and re-plug my mouse
in, and lsusb is not required to make it work again. I have the other
bug too (can't run USB 2.0).
Buzz
--
usb mouse
** Attachment added: CoreDump.gz
http://librarian.launchpad.net/7155111/CoreDump.gz
** Attachment added: Dependencies.txt
http://librarian.launchpad.net/7155112/Dependencies.txt
** Attachment added: Disassembly.txt
http://librarian.launchpad.net/7155113/Disassembly.txt
** Attachment
Public bug reported:
Binary package hint: hardinfo
crashes with bot usb and input device
ProblemType: Crash
Architecture: i386
CrashCounter: 1
Date: Thu Apr 5 11:40:08 2007
DistroRelease: Ubuntu 7.04
ExecutablePath: /usr/bin/hardinfo
Package: hardinfo 0.4.1-8
PackageArchitecture: i386
No problems until now (9.04). I don't ever recall using fwcutter.
Wireless has just worked for me. I guess it's automatic as I use
GNOME-System-Administration-Hardware Drivers.
My wireless mostly works (e.g. now), but it is intermittent.
uname -a
Linux buzz-CP-ubuntu 2.6.27-7-generic #1 SMP
Patch has been accepted in upstream hal.
--
Samsung P560 function keys fix
https://bugs.launchpad.net/bugs/355542
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Changed in: hal (Ubuntu)
Status: New = Fix Committed
--
Samsung P560 function keys fix
https://bugs.launchpad.net/bugs/355542
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Try smartdimmer, works fine here
--
Samsung P560 brightness keys block keyboard and produce all-or-nothing effect
https://bugs.launchpad.net/bugs/338182
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I copied the patch to as directed by the report but I still get the same
error.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/716468
Title:
error: Unknown error (http/404) on Youtube (patch
I easily fixed it without text manipulation by going into Low Graphics
Mode and logging into xfce normally then changing the WM theme to
something else. I didnt know this was a known problem, i thought i
crashed Xubuntu on my first day of using it.
--
You received this bug notification because
Public bug reported:
Just spent the last 4 days trying to load a minimal server config on 4
servers - finally done this only to discover that eth0 is UP but not
RUNNING.
All the servers have static IPs.
I have tried removing interface-mtu from /etc/dhcp3/dhclient.conf - no
effect.
looking at
I just swapped eth0 for eth1 in /etc/network/interfaces and I have the
same result, so it's not to do with the broadcom controller, just the
standard install (?).
--
10.10 server sun x2100 broadcom5750 - up but not running
https://bugs.launchpad.net/bugs/670847
You received this bug notification
Just tried 'ifconfig eth1 up' no problems
Just tried 'ifconfig eth1 running' and got a Host name lookup failure. If
I do 'hostname' I get the correct hostname and if I do a 'hostname -i' I get
the correct ip address.
--
10.10 server sun x2100 broadcom5750 - up but not running
In 10.10 its ok, osd comes up but there is no change to the display
brightness. As you can still adjust the brightness via nvclock i've
adjusted gnome-power-backlight-helper to support nvclock.
--
Samsung P560 brightness keys block keyboard and produce all-or-nothing effect
I have two ethernet ports at the back of the machine - port1 which is
eth0 and port2 which is eth1. By accident this morning I connected the
lan cable to the wrong port (port2 instead of port1) to continue this
severe ubuntu installation failure and everything works.
This is the dumbest mistake I
I am testing Lucid alpha 2 and this came up for me in GNOME right after
I booted the LiveCD.
--
gdu-notification-daemon crashed with SIGSEGV in gdu_device_get_object_path()
https://bugs.launchpad.net/bugs/412237
You received this bug notification because you are a member of Ubuntu
Bugs, which is
We can confirm this bug via VNC aswell, disabling the hotkey binding
within source code fixes this one.
--
Indicator applets open when pressing S or M key via NX, VNC
https://bugs.launchpad.net/bugs/568401
You received this bug notification because you are a member of Ubuntu
Bugs, which is
The patch works fine for us on all computers.
--
Indicator applets open when pressing S or M key via NX, VNC
https://bugs.launchpad.net/bugs/568401
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
As the developer of the new official libcapi20 i would be glad about the
integration in the new upcoming ubuntu release. This new version has
been successfully tested as well as in many test cases and officially in
OpenSuSE since version 11.1. Every reported bug has been fixed and is
integrated
I can confirm this situation with a new installed karmic version.
Unencrypted USB Stick mounts fine (except nautilus is not opening the
window), but encrypted external hard disc fails to prompt for a password
and is only mountable via terminal.
--
external harddrive (luks encrypted) will not
Public bug reported:
Binary package hint: anjuta
Today i installed a new karmic system and anjuta as well. Trying to
start a program does not work and then pressing Stop program kills the
whole X system. It is always reproducible but there is no log entry.
1)
Description:Ubuntu karmic
Public bug reported:
Binary package hint: anjuta
Trying to run a application twice results in a dialog stating an already
working application. Pressing both buttons results in starting a new
program.
1)
Description:Ubuntu karmic (development branch)
Release:9.10
2)
anjuta:
I'm attaching a new cleaner patch against the current karmic kernel
2.6.31-10. It adds the necessary quirks for the Samsung P560 and P210
notebook.
Submitted upstream patch has been rejected as the next kernel .32 will
add a external bitmap table which allows applying quirks via sysfs. In
favour
Affects linux kernel, not a hal-info. Hal related fixes are already
integrated.
** Package changed: hal-info (Ubuntu) = linux (Ubuntu)
--
Samsung P560 brightness keys block keyboard and produce all-or-nothing effect
https://bugs.launchpad.net/bugs/338182
You received this bug notification
With the current gnome-bluetooth version i still get this failure. So
for me its not fixed.
gnome-bluetooth:
Installiert: 2.28.0-0ubuntu1
Kandidat: 2.28.0-0ubuntu1
Versions-Tabelle:
*** 2.28.0-0ubuntu1 0
500 http://archive.ubuntu.com karmic/main Packages
100
** Changed in: gnome-bluetooth (Ubuntu)
Status: Fix Released = Confirmed
--
bluetooth-wizard will not run - assertion failure
https://bugs.launchpad.net/bugs/429523
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Public bug reported:
The lucid spandsp package is missing the spandsp.pc file used by pkg-
config.
** Affects: spandsp (Ubuntu)
Importance: Undecided
Status: New
--
[lucid] spandsp.pc file is missing
https://bugs.launchpad.net/bugs/511984
You received this bug notification
This report still has some valid points. Although the 2.6.32 kernel now
supports the serio force_release sysfs node, the users of the samsung
p560 still have to insert which keys needs the forced key release. At
the moment i do not know of any database which handels those cases, do
you?
Removing overlay-scrollbar fixes the issue for me.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1059374
Title:
Using Adwaita, many widgets are drawn with a solid black background
To manage
Public bug reported:
This is a request for a newer version of pidgin-sipe within Ubuntu
13.04. This update supports contact pictures and much more important
correct Kerberos login without a password which is mandatory in a
business environment. Please update to this newer version.
** Affects:
Public bug reported:
Would be very useful for supporting desktops, servers and development
boards (linaro) and monitoring apc ups's - recent apc ups's have usb
connectors
** Affects: ubuntu
Importance: Undecided
Status: New
** Tags: needs-packaging
--
You received this bug
@vindolin
I was getting the same error. I had to perform the additional step of:
apt-get install libssl0.9.8
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to cyrus-sasl2 in Ubuntu.
https://bugs.launchpad.net/bugs/875440
Title:
Public bug reported:
Binary package hint: mono
mono-gac?? crashed on upgrade.
ProblemType: Package
Architecture: i386
Date: Sat Feb 2 13:03:16 2008
DistroRelease: Ubuntu 8.04
ErrorMessage:
ErrorMessage: subprocess post-installation script returned error exit status 3
Package: mono-gac
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/11722075/Dependencies.txt
--
Program crashed on installing auto upgrades
https://bugs.launchpad.net/bugs/188252
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
Hi Caroline,
I couldn't tell you if it is installed now.
Have only just installed ubuntu for the first time and very newbie with
all this.
Just thought i would update and ended up with the error. What is
mono-gac anyway?
Buzz
On Sat, 2008-02-02 at 03:35 +, Caroline Ford wrote
(Tried this solution from manoj_isi and it worked - incredible but
true...)
Solution to kacpid which works fine for me :
After booting windows when boot linux kacpid starts,
(This seems to be the catalyst for the problem - dual boot going from
Windows to linux)
to stop it just cut the power
Public bug reported:
buzz-...@buzz-dee-desktop:~$ lsb_release -rd
Description:Ubuntu karmic (development branch)
Release:9.10
buzz-...@buzz-dee-desktop:~$ apt-cache policy udev
udev:
Installiert: 147~-5
Kandidat: 147~-5
Versions-Tabelle:
*** 147~-5 0
500 http
** Attachment added: uname -a uname-a.log, cat /proc/version_signature
version.log, dmesg dmesg.log, sudo lspci -vnvn lspci-vnvn.log
http://launchpadlibrarian.net/32513842/kernel-crash.tar.bz2
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/32513843/AlsaDevices.txt
Public bug reported:
buzz-...@buzz-dee-desktop:~$ lsb_release -rd
Description:Ubuntu karmic (development branch)
Release:9.10
buzz-...@buzz-dee-desktop:~$ apt-cache policy udev
udev:
Installiert: 147~-5
Kandidat: 147~-5
Versions-Tabelle:
*** 147~-5 0
500 http
** Attachment added: kernel-käfer.tar.bz2
http://launchpadlibrarian.net/32531742/kernel-k%C3%A4fer.tar.bz2
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/32531743/AlsaDevices.txt
** Attachment added: AplayDevices.txt
Public bug reported:
buzz-...@buzz-dee-desktop:~$ lsb_release -rd
Description:Ubuntu karmic (development branch)
Release:9.10
buzz-...@buzz-dee-desktop:~$ apt-cache policy udev
udev:
Installiert: 147~-5
Kandidat: 147~-5
Versions-Tabelle:
*** 147~-5 0
500 http
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/32531720/AlsaDevices.txt
** Attachment added: AplayDevices.txt
http://launchpadlibrarian.net/32531721/AplayDevices.txt
** Attachment added: ArecordDevices.txt
http://launchpadlibrarian.net/32531722/ArecordDevices.txt
@vindolin
I was getting the same error. I had to perform the additional step of:
apt-get install libssl0.9.8
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/875440
Title:
Cannot authenticate
Public bug reported:
Binary package hint: grub
lsb_release -rd
Description:Ubuntu 9.10
Release:9.10
apt-cache policy linux-image-2.6.31-20-generic
linux-image-2.6.31-20-generic:
Installiert: 2.6.31-20.58
Kandidat: 2.6.31-20.58
Versions-Tabelle:
*** 2.6.31-20.58 0
500
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/43713868/Dependencies.txt
** Attachment added: Dmesg.txt
http://launchpadlibrarian.net/43713869/Dmesg.txt
** Attachment added: DpkgTerminalLog.gz
http://launchpadlibrarian.net/43713870/DpkgTerminalLog.gz
--
package
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/31784683/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/31784684/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/31784685/ProcStatus.txt
--
i don't
Public bug reported:
Binary package hint: pidgin
i don't know
ProblemType: Bug
Architecture: amd64
DistroRelease: Ubuntu 9.04
ExecutablePath: /usr/bin/pidgin
NonfreeKernelModules: nvidia
Package: pidgin 1:2.6.1-1ubuntu0~pidgin1.9.04
ProcEnviron:
LANG=de_DE.UTF-8
SHELL=/bin/bash
SourcePackage:
Public bug reported:
Binary package hint: nautilus
buzz-...@buzz-dee-desktop:~$ lsb_release -rd
Description:Ubuntu karmic (development branch)
Release:9.10
buzz-...@buzz-dee-desktop:~$ apt-cache policy nautilus
nautilus:
Installiert: 1:2.27.92-0ubuntu1
Kandidat: 1:2.27.92
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/31992694/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/31992695/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/31992696/ProcStatus.txt
** Attachment
Public bug reported:
Tr
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: ubiquity 18.04.14 [modified:
lib/partman/automatically_partition/question]
ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17
Uname: Linux 4.15.0-20-generic x86_64
ApportVersion: 2.20.9-0ubuntu7
Architecture:
89 matches
Mail list logo
