"You need your brain in gear"? how about showing a bit more courtesy to
someone writing great software and not charging for it.
chill wrote:
> I've installed pCP6-b4 onto a 3A+ this evening. You definitely need
> your brain in gear with the 3A+, since it has no ethernet socket and
> only one
I've installed pCP6-b4 onto a 3A+ this evening. You definitely need
your brain in gear with the 3A+, since it has no ethernet socket and
only one USB socket. Setting it up to act as a wifi AP means either
doing the installation in a 3B+, or using a USB-to-Ethernet adapter, and
if you have your
Definitely a permissions issue. Newer versions of pCP do handle it a
bit better.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Perhaps a permissions problem.
Try a search for NTFS permissions and pCP (sorry ... am chasing down
something else)
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster's Profile:
Paul Webster wrote:
> Check the filesystem on the USB drive ... you might have to load
> additional support in pCP.
> https://www.picoreplayer.org/how_to_add_usb_hdd.shtml
>
> I suggest that you try with the USB stick first.
Thanks for all replies so far...
The post #1 shows I did install
wl1 wrote:
> So I need to purchase a powered USB Hub then? All the other systems I
> put together (using RPi PSU / Meanwell PSU & recommended SD Card) are
> all running fine.
Not sure now, I used one of those HDDs for a while without problem
attached directly to the pi (no HUB) 2.5amp Pi
Check the filesystem on the USB drive ... you might have to load
additional support in pCP.
https://www.picoreplayer.org/how_to_add_usb_hdd.shtml
I suggest that you try with the USB stick first.
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
kidstypike wrote:
> Agree.
>
> Try using a USB stick with a few albums on it. If that scans Ok, then as
> Paul suggests the USB HDD probably needs it's own power supply.
So I need to purchase a powered USB Hub then? All the other systems I
put together (using RPi PSU / Meanwell PSU &
Paul Webster wrote:
> Is the USB disk running off its own power - or are you powering it from
> the RPi USB?
> If RPi USB then that might be the issue.
It's powered through the USB port :-
Paul Webster wrote:
> Is the USB disk running off its own power - or are you powering it from
> the RPi USB?
> If RPi USB then that might be the issue.
Agree.
Try using a USB stick with a few albums on it. If that scans Ok, then as
Paul suggests the USB HDD probably needs it's own power
Is the USB disk running off its own power - or are you powering it from
the RPi USB?
If RPi USB then that might be the issue.
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster's
I have built a few RPi and matched them with USB HDD - running both LMS
and as a player - all OK.
But I started to help someone else, and I am having an issue with the
USB HDD failing to be scanned by LMS.
28265
I set up the LMS and point it to the Mounted Music of the USB HDD (and
it sees
Paul Webster wrote:
> \\192.168.0.xx\My_book
> or
> \\picorelms\My_book
Merci ! c'est la 2éme ligne qui a fonctionné .
Tout à l'air de fonctionner , je verrais après un reboot , si lms
retrouve mon disque dur , merci encore Paul pour votre aide :)
yanto wrote:
>
> Voici ce que je rentre dans la recherche d'un nouvel emplacement réseau:
> \\192.168.0.xx\picorelms\My_book
>
\\192.168.0.xx\My_book
or
\\picorelms\My_book
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster wrote:
> Le disque est-il maintenant vide ou est-il tout simplement invisible?
>
> S'il apparaît vide, essayez de le brancher sur un PC et voyez s'il l'est
> réellement (pCP n'aurait pas dû en modifier le contenu).
>
> Si vous ne le voyez pas, est-il alimenté par sa propre source
15 matches
Mail list logo
