feeder6 wrote:
> But my powersuply delivers 5Volt and 3Ampere. I have connected the
> audiophonics dac directly to the powersupply. The display gets the power
> from the Raspberry. I will try to change this. Display to powersupply
> and dac to Raspberry.
The microUSB cable used to deliver power
Installed and all fine with Pi2-IQaudioDAC+ with 7" touchscreen.
Many thanks and congratulations.
Robert
Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752 (plus Rega Planar
3 and Naim CD3)
2 x Squeezebox Radios, 1 X Squeezebox 3
SqueezePad, iPeng, Squeezeplay, piCorePlayer(PiB)>DACMagic
mark wollschlager wrote:
> This one is on backorder, but the only one I can find right now.
> https://www.adafruit.com/products/2033
I am using the frame/stand for the screen (bought along with the
screen), with one of the 'Pibow Audio cases'
(https://shop.pimoroni.com/products/pibow-audio)
I rather like the Pibow cases, available in several colours. There's a
'Pibow Audio' (https://shop.pimoroni.com/products/pibow-audio), which
accommodates an IQAudioDAC+.
Robert
Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752 (plus Rega Planar
3 and Naim CD3)
2 x Squeezebox Radios, 1 X
Picked up one of the 7" Pi touchscreens this week (with the
frame/stand), and added Jivelite to a Pi2/IQAudioDAC set up running
piCorePlayer. This was pretty easy to set up once I got the ribbon
cables connected correctly. Looks great, works very well.
I think all I need to do now is to bodge
Michael announced this a few months ago in 'this thread'
(http://forums.slimdevices.com/showthread.php?103885-Upcoming-changes-to-download-sites-bye-bye-Debian-and-yum-repos).
Robert
Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752 (plus Rega Planar
3 and Naim CD3)
2 x Squeezebox
In Settings | Interface tab, you can adjust the Items Per Page to show
as many albums as you like (I have it set at 100)
Robert
Touch DacMagic 100 Naim Audio Nait 3 Mission 752 (plus Rega Planar
3 and Naim CD3)
2 x Squeezebox Radios, 1 X Squeezebox 3
SqueezePad, iPeng, Squeezeplay,
pete86 wrote:
Hi,
I'm a new user to piCorePlayer and to the Squeezebox system in general.
I have installed LMS on my PC, have piCorePlayer up and running and am
using iPeng as the remote. My DAC/Amp is a Devialet 120.
I'm having two issues:
1) the bitrate appears to be locked at
With piCorePlayer, I power down by pulling the plug from the wall
socket! I think that's OK because it's running from RAM.
Robert
Touch DacMagic 100 Naim Audio Nait 3 Mission 752 (plus Rega Planar
3 and Naim CD3)
2 x Squeezebox Radios, 1 X Squeezebox 3
SqueezePad, iPeng, Squeezeplay,
Grumpy Bob wrote:
1.19 installed on a Pi2 with IQaudIO DAC+, Edimax WiFi stick. Very
smooth installation, WiFi setup very easy, connection to LMS
straightforward.
Using default settings for the most part, working flawlessly so far.
Well done!
Robert
So, after a bit of listening, I
1.19 installed on a Pi2 with IQaudIO DAC+, Edimax WiFi stick. Very
smooth installation, WiFi setup very easy, connection to LMS
straightforward.
Using default settings for the most part, working flawlessly so far.
Well done!
Robert
Touch DacMagic 100 Naim Audio Nait 3 Mission 752 (plus
123pi wrote:
Hello,
I am considering to get an RPI A+ as a PiCoreplayer with WLAN/ Wifi, but
am confused how to install the Wifi adapter.
The installation instructions for PiCoreplayer demand to connect to LAN
in order to make changes to the settings. The RPI models A and A+ do not
have a
JackOfAll wrote:
Triode's pre-compiled armv6 binary should work fine if you don't want to
compile your own.
I've got a Pi2 running the armv6 squeezelite binary on Raspbian. Seems
fine, though I'm looking forward to a Pi2 version of piCorePlayer!
Robert
Touch DacMagic 100 Naim Audio Nait
Greg Erskine wrote:
Hi GeeJay,
This may help. Obviously, use the piCorePlayer image not the Rasbian
image.
http://elinux.org/RPi_Easy_SD_Card_Setup
I don't use Macs so I have verified the suggested process works.
regards
Greg
I use 'Apple Pi Baker'
SamS wrote:
Thank you for checking Robert. My HiFiBerry Digi should arrive next
week, and I'll check with that as well.
Would a few more people be willing to try?
Forgot to mention, I'm using a wired LAN connection on all devices.
I'm using a WiFi connection to both devices.
Robert
SamS wrote:
At the risk of sounding like a pest, I am asking the piCorePlayer guys
reading along here to try out their box for the 10 seconds from track
end glitch.
I thought I had it fixed moving to LMS 7.9, but it ultimately returns.
So, I'm back to 7.8.1, and hearing the little
Corelli45 wrote:
I'm sorry if this has already been mooted, but does picoreplayer work
with the Wolfson Audio Card? I'm not keen on soldering a berry so would
like to try a snap on card.
Just to add, I've only recently added picoreplayer and am happily
playing music through a Boombox in
mjock3 wrote:
I am using 1.15.
Thanks
I had trouble with a Ralink USB WiFi stick with earlier versions of
piCorePlayer, replaced it with an Edimax one, and all was sorted. I
later used the Ralink stick with a Pi running SqueezePlug, and had
disconnection issues similar to those you describe
mjock3 wrote:
Hi Robert,
I am also using the Edimax. And it took me a while to figure out how to
get it working. I am not knowledgeable with these things. Can you tell
me how you made these power management tweaks?
Thanks,
Mark
Aah! I was hoping you wouldn't ask me! I was poking
I have a piCorePlayer with HiFiBerry. I was a soldering newbie, and had
no difficulty in assembling it. I bought the version with unsoldered RCA
sockets, which I attached to the board via wires. I had a cheap plastic
case for the Pi, and the whole shebang fitted in with a few minor
modifications
sbp wrote:
Yes, you should be able to do that easily, I almost never connect
anything to the raspberry.
For the first setup you will need to connect the raspberry to a LAN
cable. Then from another computer on your home network connect via
opening a browser and use IP of your
Wiredcharlie wrote:
I've uploaded the SD img file and wiring diagram here:
http://118design.co.uk/piCorePlayerLCD/piCorePlayerLCD.zip
Tony
I've written the image to an SD card and booted the Pi while connected
via ethernet, but cannot SSH in or open the usual piCorePlayer web
interface,
Wiredcharlie wrote:
Yes!
I did find that my pi wouldn't work with some SD cards. Is your pi
actually booting?
Tony
I can see it turn up as BOX in the list of devices attached to my router
when it is attached by ethernet. Whether than means it's booted, I don't
know! If I try to connect
Wiredcharlie wrote:
Does it show up on your remote as a player?
Doesn't show up on LMS web interface...I'll probably have another go
later this evening. I didn't check other controller apps, e.g.
iPeng/Squeezepad.
R
Touch DacMagic 100 Naim Audio Nait 3 Mission 752 (plus Rega Planar
3
I have a Raspberry Pi with piCorePlayer 1.13d and the HiFiBerry DAC.
Works very well, to the point that I've had to buy a second Pi for
playing around with. On the second Pi I have fitted one of the Element
14 'Wolfson DACs'
Wirrunna wrote:
I mounted mine like this -
http://www.hifiberry.com/products/dac/soldering-hifiberry/ - scroll down
- the RCA sockets are mounted on the clear plastic case.
That's what I did, though not quite so neatly!
Robert
Touch DacMagic 100 Naim Audio Nait 3 Mission 752 (plus
BNAL wrote:
Steen,
Now that I have the wifi dongle figured out I'm a very happy camper. The
player with HIFIBerry sounds great, configuration is easy, and it boots
in seconds.
This is my go to player.
Brad
I'm very impressed with the quality of the HiFiBerry DAC. Had a few
issues
Capt.insano wrote:
+1
I agree, the stability of the software, means that fewer bugs need
reporting but I think there is still a HUGE need for this brilliant
player!!
As previously requested, I would love to see some type of update feature
within PiCoPlayer (maybe even some wget
sbp wrote:
Hi I don't know the exact reason for your problem. I have a both a
Edimax and a Ralink wifi adaptor and both are working fine for weeks.
However, I know that the power saving option can be a problem for some
wifi adaptors.
I you can tell me the chip of your adaptor, I can see
thomka wrote:
Hi piCorePlayer Community,
today I found this interesting project and was aking me whether it *is
possible to use a HD44780 based display for status messages?*
Is such a Feature integrated yet, or maybe possible in the near future?
I want to build a squeezebox-client
101 - 130 of 130 matches
Mail list logo
