Paul Webster wrote:
> Maybe you could set-up your phone as an access point ... and then
> configure that into your RPi as an alternate network ... and then use
> SSH client on the phone to connect into RPi and edit the config file to
> add in the new connection details ... save to SD ... reboot
yeah thanks, Paul! I didn't know that and it seems very helpful for
known wifi networks.
I am running picoreplayer on a portable system and quite often I do not
know the wifi credentials before I leave my home.
The problem is that I normally do not have a keyboard with me to
configure the
I am using picoreplayer and Jivelite a lot and I think its great work!
Many thanks to Paul, Steen, Ralphy and Greg!!
For me it does not seem possible to enter the wifi credentials through
Jivelite directly. Please correct me, if I am not right.
I am using the official pi 7" Display for the
I had the same issue after uprading from a raspberry pi2 to a pi3. My
rasbian image with squeezelite & jivelite worked well on the pi2.
After upgrading my image on the pi2 and putting the sd card in the pi3
afterwards, Jivelite failed to connect to the LMS. As ralphy mentioned,
it helped to
random.t.c wrote:
> Hi all together,
>
> since yesterday the original 7" pi display is working with my
> picoreplayer.
> But now the flirc reciever doesn't work, if the display is aktive. Only
> the wake-up-function is possible, if the display is off and the
> screensaver is set to "display
The Joggler skin uses a different input screen.
19261
I´m using the Joggler skin with the official raspberry dsi display. Works
fine for me. Great work!
I find the on-screen-keyboard of the Joggler skin is too small for the size
of the dsi Display. Is there any chance to get a skin with a
My adafruit 2.8 PiTFT Display is working well. I have installed
Callumridley Jivelite clone:
https://code.google.com/r/callumridley-jivelite/
First you should disconnect the small touchscreen and connect your pi
via hdmi to a large screen. Then choose the correct resolution for you
2.8 TFT
ralphy wrote:
>
>
> # cat /etc/debian_version
> 7.8
>
> This thread might help.
>
> https://github.com/debian-pi/raspbian-ua-netinst/issues/65
>
>
Ralphy, many thanks for the link. It helped a lot and I have finally
managed to build jiivelite. I got vcgencmd onto rasbian:
1) I disabled
I am trying to get jivelite working on my raspberry pi2 with an adafruit
2.8 PiTFT touch display. The display is installed properly. Squeezelite
is also working. Before I started the installation I have flashed the
official Rasbian image. I followed the installation instruction in post
#3 and
