Paul Webster wrote:
> I can repeat this.
>
> My first suspicion is that it is to do with the pcp_lmsip (in
> pcp-functions) returning 2 IP addresses.
> Perhaps the output from the netstat call that it makes has changed and
> it no longer handles it properly.
Is there something I can do? It
paul- wrote:
> You will have to call that as well
I have one strange thing now. I connect via ssh from my Mac and tried a
few commands:
Code:
tc@musikbox:~$ pcp up
sh: 192.168.178.109: unknown operand
wget: server returned error: HTTP/1.0 501 Not Implemented
paul- wrote:
> You will have to call that as well
Ok! Thank you!
Pi4 4GB piCorePlayer with LMS and Squeezelite for USB; Pi3B+ (7"
Display, Hifiberry DAC+ Pro) piCoreplayer with Squeezlite/Jivelite for
Hifiberry and Bluetooth headphone; two Airport Express
paul- wrote:
> Just run the init.d script
Oh, that seems easy. Thank you!
Will this also restore the alsamixer values or do I have to call it
also?
Pi4 4GB piCorePlayer with LMS and Squeezelite for USB; Pi3B+ (7"
Display, Hifiberry DAC+ Pro) piCoreplayer with Squeezlite/Jivelite for
paul- wrote:
> yes, if you can run a ssh session/script from automation, then that
> works.
Yes, I managed to get it to work!
Is there any possibility to restart squeezelite from the shell? I didn't
found a "pcp" command for this. I need this because squeezelite will not
be started if the USB
paul- wrote:
> The device has to be present to be able to restore the settings.
Ah, that explains, why I can not start alsamixer without the speakers
attached! Thank you!
Pi4 4GB piCorePlayer with LMS and Squeezelite for USB; Pi3B+ (7"
Display, Hifiberry DAC+ Pro) piCoreplayer with
paul- wrote:
> It sounds like you are starting the system with the speakers powered off
Sometimes that is the case, correct.
paul- wrote:
> are disconnecting and then reconnecting them.
This is often the case.
paul- wrote:
> The only solution is to build creative udev rules.
That sounds
Hello!
I have a piCorePlayer 6 installation with LMS and to use it also as a
headless player I attached USB Harmon Kardon Soundsticks to it.
To get good results for volume I had to use alsamixer:
30579
I saved it using the website:
30580
If I am not using alsamixer the music is nearly off at
ElFishi wrote:
> This could be your stick dying. Happened to me, too.
:-(
I would say it is dead. But it is maybe six months old. Strange.
Pi4 4GB piCorePlayer with LMS and Squeezelite for USB; Pi3B+ (7"
Display, Hifiberry DAC+ Pro) piCoreplayer with Squeezlite/Jivelite for
Hifiberry and
Hello!
Today something strange happened to my USB stick in my piCorePlayer
installation (Pi 4B, SD-Card for piCorePlayer, USB Stick for LMS
database in ExFAT format, USB SSD for music in HFS+ format).
LMS could no longer write to the USB Stick, so I put it into my Mac. I
saw that the stick is
Man in a van wrote:
> Also check the volume setting for the player under
If I do this I can not change the volume anymore, the USB Soundsticks
are controlled completely via software, only the subwoofer has a
control.
I also have a question of handling USB devices. I have Harmon Kardon
Soundsticks with USB attached and I switch them off when not in use.
But when I switch them back on, I have to restart Squeezelite because
otherwise the volume (I used alsamixer to set a higher level and saved
this) is not
d6jg wrote:
> When you touch the screen it rocks backwards very easily
That doesn't happen with the Smarti Pi case that I mentioned in the
other thread.
carsten_h's Profile:
You can take a look into this not so old thread:
https://forums.slimdevices.com/showthread.php?112282-Nice-cases-for-official-Raspberry-Pi-7-quot-lcd
There are cases mentioned that also work with Pi 4B.
carsten_h's
huxmut wrote:
> nice. can you try the usb as boot ?
Not in the moment. I have to update the Pi with the beta eeprom Firmware
and also install the SD card on USB (both USB 3 ports are used).
carsten_h's Profile:
huxmut wrote:
> if you have lms on tbe same pi it might be even more advantageous.
> certainly worth a test :)
I have a piCorePlayer Installation with mainly LMS on a Pi4B. Only the
pCP Installation is on the SD card.
The LMS database is on a USB Stick and the music is on a USB attached
SSD.
huxmut wrote:
> but it might be even faster if the usb drive was a ssd
When I look at my Pi3B+ it takes only 20 to 30 seconds to boot to see
Jivelite on the 7" screen. Would you expect USB to be much faster?
carsten_h's
cobrasu wrote:
> I hope picoreplayer could really boot from USB3.0 flash drive from
> Raspberry Pi 4.
Why?
The SD-card is only used a short time at boot and then not more.
For music you can choose an extra USB drive and for the LMS Database
also.
So what should be better on a boot from USB?
Hello!
I wanted to do the ALSA Mixer Adjustments for my USB Audio (Harman
Kardon Soundsticks) and I have to do this via ssh and "alsamixer".
But all I get is this message in my macOS terminalwindow: "Error opening
terminal: xterm-256color."
Does anyone know of a terminal on macOS which is
Greg Erskine wrote:
> Do you have "Oils on the water" from the ABC? Recorded in 1985 released
> 20 years later!
No, sorry!
But as you are from Sydney, I have bought the "Earth and Sun and Moon"
CD 1993 in Sydney. :-)
Long time ago, but it was the best holiday trip ever!
hartzell wrote:
> The look like they're lego-compatible, do you know for sure?
They are compatible:
30418
+---+
|Filename: IMG_0307.JPG |
|Download:
Sure, I know a case. It is really great. I have the version 1 for a Pi
3B+, but there is a new one where also a Pi 4B would fit.
Here is a link to the Smarti Pi Touch case: https://smarticase.com
I have the backcover that is a little bit thicker and so a Hifiberry
DAC+ Pro fits also in the
Cut-Throat wrote:
> except the last step 'pcp rb' failed and I was no longer connected
The step didnt failed. This command is: piCorePlayer reboot, so the Pi
will be rebootet and is normal that you are loosing the connection. :-)
Man in a van wrote:
> usb hard drive booted on rpi4 this afternoon, seems to be be working ok
How did you do it? Do you still have a SD card mounted?
carsten_h's Profile:
Howard Passman wrote:
> Has anyone used one of these or something like it?
I think piCorePlayer can only use Bluetooth for Audio transmission not
for controlling. The Buttons for louder/quieter/next/play/pause/prev on
headsets can also not be used.
Some months ago I read reviews about this
Man in a van wrote:
> plughw instead of Output settings: "hw:CARD=SoundSticks,DEV=0"
After setting this and a reboot, it seems to be fine (nothing is set for
ALSO volume control).
I will try if this is what I want. :-)
Man in a van wrote:
> do the speakers have their own volume level ?
No,
Man in a van wrote:
> I know some 'phone apps allow the volume steps to be altered by
> different values
Thank you for your reply!
I have enough steps available, I can step from 20% to 0% in 1% steps.
But there is simply no sound. The volume goes from a little bit too loud
at 20% to off or
Thank you for the explanation!
Man in a van wrote:
> I thought you wanted it quieter?
I want to have more control of the volume at the lower end of the
volume. When I want to hear loud I also want to set this.
It was a little bit strange to have at 20% to much volume and below that
to have no
paul- wrote:
> Don't use the PCM volume control.leave that blank.
Then I can hear nothing.
paul- wrote:
> Set your PCM volume to 100% or 0db, then let the software make volume
> adjustments.
Where can I set this?
Hello!
I attached USB speakers (Harman Kardon Soundsticks) to my Pi to use it
with squeezelite.
I set the following parameters for squeezelite:
Output settings: "hw:CARD=SoundSticks,DEV=0"
ALSA setting: 80:4::1:
ALSO volume control: PCM
This works for hearing the music loud.
But when I want to
Ok. I will do!
Paul Webster wrote:
> include LMS logs with debug enabled
How can I set debug to enabled for LMS?
carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113
View this thread:
Hi!
At home I am using Home Assistant for automations. It is possible to
control LMS from Home Assistant. Also it is possible to let LMS "say"
texts.
If you are doing this, there is this URL send to LMS to play it:
https:///api/tts_proxy/59d9a...long
number2d168f_en_-_google_translate.mp3
doggod wrote:
> What is "Xwindows"?
Correctly is is named the X Window System or X11 or X. The s at the
end is not correct. :-)
Here you can find information:
https://en.wikipedia.org/wiki/X_Window_System
It is the Unix Window manager and was developed in the 1980s.
Hi!
At home I am using Home Assistant for automations. It is possible to
control LMS from Home Assistant. Also it is possible to let LMS "say"
texts.
If you are doing this, there is this URL send to LMS to play it:
https:///api/tts_proxy/59d9a...long
number2d168f_en_-_google_translate.mp3
senthor wrote:
> I can't find the "Save to USB" option anymore
Do you mean this:
29963
+---+
|Filename: Bildschirmfoto 2020-04-06 um 17.40.56.png|
|Download:
paul- wrote:
> Lets try this again, I think I have the bluetooth package fixed. I
> bumped the build to 0005, so I can be sure you have the latest.
Thank you for your fast work!
Here is the log-result:
Code:
pCP Bluetooth extension build:0005
Starting BT
Verulamius wrote:
> pCP Bluetooth extension build:0004
Oh, mine is showing 0003 although I did a fresh install yesterday after
paul- mentioned the new version. Strange. Maybe no new software is
coming into the EU. .-)
Paul Webster wrote:
> What do you see in the specific pCP Bluetooth logs.
Look at my post here:
https://forums.slimdevices.com/showthread.php?111787-ANNOUNCE-piCorePlayer-6-0-0=969291=1#post969291.
carsten_h's Profile:
Doryphore wrote:
> what is the command to type to stop LMS at 11:00 p.m. and restart it at
> 6:00 a.m. ?
I don't think it is possible. If you shut it down via crontab, you have
to drop power and attach power again to let the Pi run again. There is
no possibility to let the Pi automatically
Verulamius wrote:
> the BT speaker deamon has a red cross next to it. If I try to restart
> it, and then refresh the bluetooth page, it still remains not working.
Yes, I forgot to mention this in my last post! That is also happening
here as I wrote a page before. :-)
paul- wrote:
> Alright, I found the issue. Python error handling is cool and annoying
> at the same time. Update your pcp-bt6 package, (Or install fresh if
> you have removed it). If you look at eh log you should see v6.0.0.0004
> for the daemon version.
>
> Then disconnect, wait a few
Nolli wrote:
> s there any possibility to change from material to classic
You don't have to change, you can use them both. For material you only
have to use: http://:9000/material for classic: http://:9000
carsten_h's
coyrls wrote:
> This one works for me:
I have this one: https://www.amazon.co.uk/dp/B07D2BHVBD at home. But I
did not tested it with a Pi 4B. It has a ASM235CM chip.
I can test it if anyone is interested.
coyrls wrote:
> But it's also worth checking the power consumption of the SSD that you
paul- wrote:
> Alright, I found the issue. Python error handling is cool and annoying
> at the same time. Update your pcp-bt6 package, (Or install fresh if
> you have removed it). If you look at eh log you should see v6.0.0.0004
> for the daemon version.
Something isn't working with this
Clausi wrote:
> Which brand/type of enclosure is yours which is working fine?
Interestingly it is this one:
https://www.raidsonic.de/products/external_cases/external_cases_25/index_de.php?we_objectID=2149
It is also an USB 3.1 UASP enclosure, what I didn't know anymore. I am
using it attached
Clausi wrote:
> whether piCoreplayer has any problems with the USB 3.0 of the Rasberry
> Pi 4?
I have here a SATA M.2 SSD in an USB 3.1 and also in another USB 3.0
enclosure which is not running with piCorePlayer on a Pi 4B. It takes
minutes to mount the drive.
I have a 2,5" SATA SSD in an USB
Verulamius wrote:
> so each time I turn on my headphones I need to access the PCP Web page
> to connect the device.
That is very strange. I have here Bluetooth headphones paired with
piCorePlayer and every time I switch them on, I can change the Player
that is controlled by the Pi touch
This project looks very interesting! Thank you for your work!
I have a LMS-only installation of piCorePlayer on a Pi 4B inside a Argon
one case
(https://www.argon40.com/catalog/product/view/id/52/s/argon-one-raspberry-pi-4-case/).
There is no jivelite installed on it because it only act as a
paul- wrote:
> WiFi and Bluetooth is always sketchy on a pi. If the WiFi is connected
> on a 5G channel is the most stable, but 2.4 is really a crapshoot.
Yesterday after installing a completely new 6.0.0 (before it was an
insitu update from 6.0.0 RC1 to 6.0.0) there are no more spontaneous
StM wrote:
> Just checked the main repo and the file is o.k. now. You might have to
> delete the file manually before trying again.
How can I manually delete the file? Where is it?
carsten_h's Profile:
paul- wrote:
> are you sure you have not run out of space on your disk?
Yes, there are 112.5MB free:
Code:
FilesystemSize Used Available Use% Mounted on
/dev/mmcblk0p2 192.0M 70.8M112.5M 39% /mnt/mmcblk0p2
carsten_h wrote:
> I have the same problem. Now I am trying to find out where to set the
> mirror repo.
I found that I can set the mirror repo on the bottom of the page. But I
am still getting this:
Code:
Error retreiving
http://picoreplayer.sourceforge.net/tc
StM wrote:
> Is it just me or is there a problem with the pcp-jivelite_hdskins.tcz
> file?
> md5sum of the downloaded file is ff34fb5f141b59ea522264c0569bfab9
> pcp-jivelite_hdskins.tcz.md5.txt says it should be
> 363f701de0b03b3feb77850ebec14d5f so at the moment I cannot install
> Jivelite.
>
As some problems go away a few days after testing, I tested the Pi3B+
with 6.0.0 again. It is still rebooting suddenly when playing
something.
Is there some possibility to find the reason for a sudden reboot?
Will it be better to make a whole new installation of 6.0.0 an not use
the insitu
paul- wrote:
> If the WiFi is connected on a 5G channel is the most stable, but 2.4
> is really a crapshoot.
I am using a 5Ghz channel. Very strange are the spontaneous reboots
without interaction.
carsten_h's
A few hours later I have to say that my Pi 3B+ is restarting suddendly
when hearing radio. Sometimes after reboot it is working again, but
sometimes there is no Wifi connection. On this Pi Squeezelite, Jivelite,
Bluetooth and Wifi are activated and attached are a Hifiberry DAC+ Pro
and a 7
An insitu update of a Pi 4B and a Pi 3B+ from RC1 worked without any
problem!
Thank you for your great work!
carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113
View this thread:
bpa wrote:
> Perhaps somebody can provide some details.
I tested MPD with Volumio and a few other clients before going to
piCorePlayer and I must say that piCorePlayer is much better for me. The
MPD solution was really slow when browsing through my music library, it
was really no fun. Now with
d6jg wrote:
> iPeng is the ONLY LMS compatible player on iOS
No, there is also SqueezePad which works on iPad!
carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113
View this thread:
Zabizabo wrote:
> I have to decide what is the more important for me, my SD Card or my
> music collection
I am using the SD-card only for piCorePlayer. I have attached a
read-only SSD with the music on it and an USB Stick for the LMS-Data.
So the SD-card is only used for booting and sometimes
paul- wrote:
> 6.0.0 Release Candidate 1 is posted. See
> https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support=944664=1#post944664
> for details
Thank you very much! The update from b9 was working fine!
I am still getting the error when doing a Patch Update:
paul- wrote:
> If your not connected to the internet, then yes it's normal. Updates
> require internet connections.
The Pi is always connected to the internet via ethernet cable. Th other
updates like LMS or Squeezelite are running fine.
I have on Pi3B+ with Squeezelite/Jivelite, Hifiberry and Bluetooth
running. I did an Patch update today that worked without a problem.
The other Pi4 with Squeezelite and LMS running brought this message when
doing the Patch Update:
Code:
Checking: pcp-6.0.0-www.tcz
simonheard wrote:
> That isn't happening. LMS doesn't apparently remember the device, BOOM 3
> doesn't appear in my player list and future connections do not start
> playing where I left off. In every case with any of my devices, I have
> to restart the connect daemon. Is that behaviour
paul- wrote:
> There is a temperature graph option on the Extras pages.
On the Diagnostic page there is a "Raspberry Pi" option. There you can
also see the actual temperature.
And you have to use
Code:
sudo modprobe i2c-dev
as the first user
For the original 7" Pi Display together with a Pi you can eg. use the
SmartiPi Case: https://smarticase.com/ to mount it on the wall.
carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113
View this
simonheard wrote:
> connect as eg. "BOOM 3"
Is it possible that this is the same problem as I had with white spaces
in the name?
carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113
View this
paul- wrote:
> You should not be allowed to enter odd characters in the web interface.
> I tried to trap characters coming from the Bluetooth device itself.
> Would you mind removing bluetooth, rebooting and then re-pairing. The
> non regular ascii should be ignored..
>
> I dont have
carsten_h wrote:
> Tomorrow I will install it onto my Squeezelite/Jivelite installation on
> a Pi 3B+ with 7" display.
I did it now. Everything has worked without any problem.
I did an update of bluetooth afterwards and now the name of the
headphone can have spaces. "Spe
paul- wrote:
> I just pushed a new image.
Thank you! I installed it insitu onto my LMS only installation on a Pi 4
inside the Argon One case and everthing is working fine.
Both user commands and the argononed.py script are still at their
places.
Great work!
Tomorrow I will install it onto my
It is not working:
Code:
Starting BT Controller
bcm43xx_init
Flash firmware /lib/firmware/brcm/BCM4345C0.hcd
Set BDADDR UART: b8:27:eb:db:e8:15
Set Controller UART speed to 300 bit/s
Device setup complete
RPi Bluetooth Hardware Addrress:
paul- wrote:
> but for sure spaces in the player name break it. I'll have to add a
> regex in the html to make sure there are no spaces. I'll have to
> research if space can be allowed, but I am using the device name in the
> asound.conf, such that you will be able to use alsaequal with
paul- wrote:
> You forgot to take the spaces out of the player name. Dashes are fine
I think I misunderstood you. The name "Teufel Mute BT" is the name of
the headphone that is distributed by them when connecting through
Bluetooth. I can not change it.
paul- wrote:
> Yes. It is to allow integration with Alsaequal. I might be able to get
> spaces back in, I need to see how Alsa handles spaces in asound.conf.
Ok! Thank you for the explanation!
Her is the extended log:
Code:
Starting BT Controller
bcm43xx_init
chill wrote:
> What is the format of the two disks?
The disk on the Pi is in the moment an ExFAT filesystem, but this should
be uninteresting as it is a samba share for the outside.
On my Mac it is an APFS filesystem.
chill wrote:
> Is this an option in CCC? Does CCC keep a log of the
paul- wrote:
> Okay, First update the bluetooth extensions, I made a few changes, to
> give a bit more information
Ok, I will do it when I am back at home.
paul- wrote:
> but for sure spaces in the player name break it.
Oh, did you change something there? With the older beta versions it
chill wrote:
> Yes, you can share the disk using samba on the RPi.
It is working.
chill wrote:
> but the Mac has rsync that can work with network disks
Yes, CCC ist using rsync internally. I started it to test yesterday, but
there are always all files synced. There has to be some problem
paul- wrote:
> Attaching the bluetooth log would be best for me to evaluate what is
> happening.
Sure, here it is:
Code:
Starting BT Controller
bcm43xx_init
Flash firmware /lib/firmware/brcm/BCM4345C0.hcd
Set BDADDR UART: b8:27:eb:db:e8:15
Set Controller UART
paul- wrote:
> To be clear, you are saying that after a reboot, there is nothing shown
> in paired devices?
That was the case the last time I tested it. As I tday started the Pi
there was already an entry for my headphone and it was connected as I
switched the headphone on.
paul- wrote:
>
chill wrote:
> I also use a Mac, and I adopted EXT4 for my music storage attached to my
> RPi4. FileZilla (on the Mac) allows me to copy files to my music disk
> over the network, with a fully intuitive graphical interface
Ok, this seems to be interesting. I think it should also be possible
paul- wrote:
>
> >
Code:
> >
> echo "var/lib/bluetooth" >> /opt/.filetool.lst
> pcp bu
>
> >
>
I looked into .filetool.lst before and there this line is already the
last one. But I added it.
I also saw that before the change the data
paul- wrote:
> But yes M.2 drives (Or rather the enclosures) are very problematic on
> the RPI boards.
My Pi 3B+ didn't had any problems, but OK it is only USB 2, maybe there
is no problem. I will try it today with a 2,5" SATA SSD in an USB 3
enclosure.
paul- wrote:
> And ditch HFS and
Man in a van wrote:
> So it's a LMS on pCP/usb mount problem ?
I can not tell you. That is something I want to know.
Man in a van wrote:
> Well why not try LMS on a Raspbian Desktop ?
I wanted to have a tiny system that is not writing to the SD-card all
the time. That would be the case with
Man in a van wrote:
> is this the one for the rpi3 or the rpi4
It is the USB-C poweradapter for the Pi 4.
Man in a van wrote:
> Have you thought about installing Squeezelite on a Raspbian Desktop
No, because this Pi should be only my music-server (LMS) and everyone in
the house can use it.
Man in a van wrote:
> Some of the chipsets in the usb connectors sometimes don't don't
> function corrrectly when connected to a pi.
Yes, I searched for it. My enclosure has a ASM1351 chip inside, which
should make no problems, as I read there.
Man in a van wrote:
> Have you tried the usb2 slots ?
No, I didn't. But the SSD worked before without any problems on the same
port. Why should a few files more make a difference?
Man in a van wrote:
> Otherwise type this into a search engine and enjoy the read
I am able to use a search
Paul Webster wrote:
> How is the SSD powered?
Only via the USB 3 slot of the Pi 4. I checked if the lightning symbol
is shown on the HDMI output, but it is not there, so there should be no
power problems. I am using the original Pi poweradapter.
I still have problems with starting up piCorePlayer. I have attached a
USB 3 enclosure for a M.2 SSD on a Pi 4. This is partitioned with MBR
and inside is an ExFAT filesystem (hfs+ is also not working).
At startup piCorePlayer is waiting at USB mount forever. If I start
without the SSD
ralphy wrote:
> It is private. Attached are Michael's updates.
There are two very small error in the German strings:
Code:
um die Helligkeit au einen Prozentwert des Maximums festzulegen
(it can be found two times)
this should be:
Code:
I am using this settings now:
29238
I tried to change the ALSA volume control:
29239
but I can not change anything there. Or should this be edited by hand
not selected on the right side?
Also on thing I hear is that the Soundsticks are at 100% not as loud as
they are attached to may Mac. On
mcduman wrote:
> where is it?
In the download folder. Just delete the filename from the link in the
first post.
carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113
View this thread:
Hello!
Today I installed my Pi 3B+ with the new 6.0.0b8 from ground up as I no
longer use LMS on this Pi.
Everything is working fine! Only my Bluetooth headphone is not working
as expected.
I switched on Bluetooth of the Pi, activated Bluetooth daemons and
paired the headphone. It was on the
d6jg wrote:
> Just select USB as the output and follow the suggested settings
You are right! It has been so easy. Everything is working fine!
Thank you!
carsten_h's Profile:
Hello!
I have here the old Harman Kardon Soundsticks I with USB input that are
working fine on my Mac as sound output.
Is it possible to use such USB Speakers attached to a Raspberry Pi 4
with installes piCorePlayer and use them as sound output?
How do I have to configure them? Is this a
paul- wrote:
> Why press the button to update squeezelite
Oh, that part updates only Squeezelite? Ok, than it is clear. I thought
"Update all" updates the whole piCorePlayer.
carsten_h's Profile:
Hello!
Today I found an interesting case for a Pi zero W with a display and
buttons included (German):
https://www.berrybase.de/raspberry-pi-co/raspberry-pi-zero/gehaeuse/gpi-case-handheld-gaming-geh-228-use-f-252-r-raspberry-pi-zero
Here is the link to the creators website (English):
Hello!
I am using an installation on a Pi 4 of piCorePlayer only for the LMS
part. So I disabled Squeezelite for it which is working at normal system
start without any problems. But when I am starting an Update/Full Update
on the main page Squeezelite will be started afterwards.
It's not a real
Maybe it has a little bit more or less sectors.
carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
Supertramp wrote:
> Just one partition which uses the complete available space.
Which partitionformat did you used? GPT or MBR? Maybe the other one is
using the 16MB. :-)
carsten_h's Profile:
Supertramp wrote:
> I recently bought a WD Red 10TB HDD
Did you partitioned the drive when you got it (you should always do it
with new drives, because you don't know what is installed)?
Maybe it is the rest of the drive that can not used for the partition
with the ntfs filesystem because it
201 - 300 of 391 matches
Mail list logo
