despited the disabled internal sound squeezelite stopped again today. No
clue how to proceed or what the best trouble shoot sequence would be.
Only thing i could imaging is to enable log's and use the script
(somehow) of TheHypnoToad 2019-08-09, 14:01 to trunk the logfile. Not
sure how to
paul- wrote:
> It should be and the soundcard control page. Button right by the
> soundcard selection drop down on the squeezelite page.
All still running without any change or reboot.
Internal soundcard seems to be disabled by default
27974
Did not manually remove the marker.
paul- wrote:
> It should be and the soundcard control page. Button right by the
> soundcard selection drop down on the squeezelite page.
Thanks, I did't think to check card control, I've disabled onboard sound
now. :)
Also, I may have a solution to the whole log file filling up memory
I'll try asap.
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch
(Study 2), few spare unit's
*Server:* LMS on Pi3 7.9.1. on PcP 3.21
*Network:*
TheHypnoToad wrote:
>
> edwin2006 this may be worth trying, I had to do it manually by editing
> the config.txt file as I couldn't see an option to disable on-board
> audio in the PCP webinterface.
It should be and the soundcard control page. Button right by the
soundcard selection drop
paul- wrote:
> all=debug is probably what we need. But that is going to create a huge
> file, so we need to be sure we don't fill up the memory on the device.
I've set my squeezelite to all=debug also just in case the issue comes
back for me.
It may be possible to have a small script that
edwin2006 wrote:
> Alright, how
> Btw, this week out of town so I guess something for next week.
No good way.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
paul- wrote:
> all=debug is probably what we need. But that is going to create a huge
> file, so we need to be sure we don't fill up the memory on the
> device.Alright, how
Btw, this week out of town so I guess something for next week.
*SqueezeBoxes:* 1x Transporter (Living room) 1x
all=debug is probably what we need. But that is going to create a huge
file, so we need to be sure we don't fill up the memory on the device.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
paul- wrote:
> You have to turn on logging on the squeezelite page
Figured it would something like that but which options all=info,
all=debug etc??
@TheHypnoToad. Yes next time I will check cpu also. Thanks for command
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
paul- wrote:
> I would call that severely overloaded for a zero. Shairport sync can
> definitely cause squeeze lite to crash, as only one player can have the
> audio output open at a time.
>
> I would disable shairport for a while and see if that helps. There is
> a LMS plugin for shairport
edwin2006 wrote:
> Alright, squeezelite has stopped again. Want to show the log file but im
> unable to locate it.
> I was assuming it's on
> Beta
> Main Page
> Diagnostics
> Logs
>
> or
> Squeezelite Settings
> (i do find an option "Log level setting" but this is set to none)
>
> For now a
paul- wrote:
> Logging is on the squeezelite page. Logs are only retained until a
> reboot.
Alright, squeezelite has stopped again. Want to show the log file but im
unable to locate it.
I was assuming it's on
Beta
Main Page
Diagnostics
Logs
or
Squeezelite Settings
(i do find an option "Log
Logging is on the squeezelite page. Logs are only retained until a
reboot.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Computer is going into hybernate which will break SSH session. How to
enable/disable logging? And how to purge logfiles when they have served
their purpose?
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
That is all normal outputprobably need to leave that running
with the ssh open see if there is something logged when it stops.
You can also turn on logging from the web interface, and reboot.then
check the logging when it stops.
piCorePlayer a small player for the Raspberry Pi in
now it is working agaian
Code:
tc@Edwin-Kantoor:~$ sudo killall -9 squeezelite
tc@Edwin-Kantoor:~$ sudo /usr/local/bin/squeezelite -n "Edwin Kantoor" -o
equal
-a 80:4::1 -d all=info
[08:19:11.069543] stream_init:370 init stream
[08:19:11.083236]
Just if there are errors shown when you try to restart squuezelite
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
I haven't restarted the pi so I'll try the hard stop command answers see
what happens. Anything I should save if I have to restart the pi?
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden)
Looks like squeezelite is hanging hard. If you notice from your second
ps command, the time still says 1d00. I wonder if it ever stopped
during the restart.
So next time, we might need to do it all by hand.
sudo killall -9 squeezelite
then make sure it has really stopped. Then relaunch
Yes, it's gone. Im still able to ssh into it.
Code:
tc@Edwin-Kantoor:~$ ps -A | grep squeeze
2302 root 1d00 /usr/local/bin/squeezelite -n Edwin Kantoor -o equal -a
80 4 1
13133 tc0:00 grep squeeze
Sneeked from previous post
Mine is still playing. I have no extras installed except equilizer.
Which SSH commands (Unix noob) do a have to give when problem arises?
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden)
I would call that severely overloaded for a zero. Shairport sync can
definitely cause squeeze lite to crash, as only one player can have the
audio output open at a time.
I would disable shairport for a while and see if that helps. There is
a LMS plugin for shairport that integrates much
Ok, I've had my player apart today and double checked my GPIO solders,
and all are measured OK with multimeter with continuity test, so
hardware side is good.
paul- wrote:
> Which hifiberry board are you guys using?
I'm using a board which is essentially the same as the hifiberry DAC+
Zero -
Greg Erskine wrote:
> Hi edwin2006,
>
> Try removing "-C 15" from the Squeezelite command line. This is usually
> added for Shairport-sync".
>
> I haven't seen "[ 901.862425] sched: RT throttling activated" in dmesg
> before? I would have assumed you are using the RT kernel.
>
> I'd be
Okay, I dug into that rate limiting message. Since rpi started to merge
some of the 384k support, I decided to start including the full 384k
patch set in the regular kernel. The PCM5102a driver has a parameter to
the dtoverlay to enable the 384k support. So that's why that message is
Hi edwin2006,
Try removing "-C 15" from the Squeezelite command line. This is usually
added for Shairport-sync".
I haven't seen "[ 901.862425] sched: RT throttling activated" in dmesg
before? I would have assumed you are using the RT kernel.
I'd be tempted to enable "all=info" to see if the
Normal version.
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch
(Study 2), few spare unit's
*Server:* LMS on Pi3 7.9.1. on PcP 3.21
Another question: are you using the normal kernel or the rt kernel?
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: 'https://www.picoreplayer.org' (https://www.picoreplayer.org/)
*Please 'donate'
Which hifiberry board are you guys using?
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted)
if
The fat error is pretty harmless, and would be unrelated.
from your log,
Code:
[ 31.100454] pcm5102a-codec pcm5102a-codec: pcm5102a_dai_startup: Limiting
sample rate support to 192kHz MAX
[ 31.655319] brcmfmac: power management disabled
[ 31.767930]
I've just had this exact thing happen to me, Also running PiZero, with
HifiBerry Dac Zero, on PcP 5.0, I was originally running 4.1 and
upgrades have been with the card in the Pi.
On my LMS webinterface, the player called 'Orange' simply vanished.
Music stopped straight away. Listening to a
Just type dmesg from command line.
ItÂ’s also on one of the diagnostics pages
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
I meant invisible but auto correct changed it in I visible [emoji53]
And how do I look for dmesg?
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x
edwin2006 wrote:
> If it's I visible to lms I'm still able to access pcp GUI, so it should
> be pingable also. So it looks like it's just Squeezelite that has been
> has stopped. Will try SSH next time.
If it's visibly to lms, then squeezelite is still running. However, if
you stop squeezlite
TheHypnoToad wrote:
> If SSH connection fails, try just 'PINGing' the Pi if you know it's IP
> address or hostname, sometimes my PiZero will freeze, no SSH access but
> I'm still able to PING it so it still has network access.
>
> It doesn't happen often, if it did I may look into the hardware
edwin2006 wrote:
> I will try as soon I've got the problem but it could take some time
> before this happens.
If SSH connection fails, try just 'PINGing' the Pi if you know it's IP
address or hostname, sometimes my PiZero will freeze, no SSH access but
I'm still able to PING it so it still
I will try as soon I've got the problem but it could take some time
before this happens.
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch
I would ssh in and then try to restart squeezelite from command line
sudo /usr/local/etc/init.d/squeezelite restart
See what it says from command line.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
I'm not 100% sure but I thought I could. Next time it happens I'll try.
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch
(Study 2), few spare
edwin2006 wrote:
> I got lost in the PcP 5.x thread were i posted a problem with a Pi-zero
> with hifiberry dac
> https://forums.slimdevices.com/showthread.php?110642-ANNOUNCE-piCorePlayer-5-0-0=944736=1#post944736
> So this is the original post
>
I got lost in the PcP 5.x thread were i posted a problem with a Pi-zero
with hifiberry dac
https://forums.slimdevices.com/showthread.php?110642-ANNOUNCE-piCorePlayer-5-0-0=944736=1#post944736
Today again player disappeared. When looking at PcP the dac is still
visible and PcP also say's that
42 matches
Mail list logo
