von-Ah wrote:
> Thanks for addressing my question, Paul. Could you please provide a
> little more context on your suggestion? What does set cron entail?
Cron is enabled on the tweaks page
.. if you only have one there, you
can enter the cron entry on the web page. The link provided above
romeylo wrote:
> Hello,
> I'm running a RaspberryPi with AlloBoss 2 and 7" touch display. So that
> the device can be switched off properly (because of LMS) I'd like a
> softkey on the main screen. Is there a solution for this?
> greetings roland
Assuming you're running Jivelite - on your pi
Hello,
I'm running a RaspberryPi with AlloBoss 2 and 7" touch display. So that
the device can be switched off properly (because of LMS) I'd like a
softkey on the main screen. Is there a solution for this?
greetings roland
When You press one time it shutdown and next press the button start up
PiCore Player? What is a different between poweroff and shutdown?
I want to control by level of GPIO:
HIGH = start PCP
LOW = stop PCP
maciekelga's
One issues a shutdown command, the other toggles a gpio when it is okay
for the power to be removed from the pi.
Turning back on requires extra hardware like the on/off shim described
above
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
maciekelga wrote:
> Hi,
>
> I have PiCore on RPi3 and need two functionality:
> 1. Set up one pin as output to connect external LED to see if PiCore is
> running or not.
> 2. Is possible to set up pin as on/off? I mean if is low level on GPIO
> than PiCore is should be disable, when is high
Hi,
I have PiCore on RPi3 and need two functionality:
1. Set up one pin as output to connect external LED to see if PiCore is
running or not.
2. Is possible to set up pin as on/off? I mean if is low level on GPIO
than PiCore is should be disable, when is high should be active.
Is anybody who
von-Ah wrote:
> Thanks for addressing my question, Paul. Could you please provide a
> little more context on your suggestion? What does set cron entail?
Not Paul, but perhaps this links will help you get started. I am not
certain if the pCP implementation of cron matches this generic
I have this funny phenomenon, that sometimes after reboot, the
screensaver does not turn on after 30s to my "beloved" black digital
clock (black). Also switching to other "clocks" does not help them.
That would usually be the case when it didn't get valid time
information. This can happen when
I have this funny phenomenon, that sometimes after reboot, the
screensaver does not turn on after 30s to my "beloved" black digital
clock (black). Also switching to other "clocks" does not help them.
After a few days normally it suddenly works again (so after a few
restarts)
My 4 picore players
paul- wrote:
> You could set cron on all of the devices to do that. The squeezelite
> script is in /usr/local/etc/init.d
Thanks for addressing my question, Paul. Could you please provide a
little more context on your suggestion? What does set cron entail?
11 matches
Mail list logo