Castalla,
I tried but I couldn't reproduce this, so that's why I asked for you to
send me one of your mp3 files. I see what you mean about the elapsed
time jumping back at the end of the track, when there isn't a next track
to play, but I'm not getting any unwanted noise at the end of the track
JackOfAll wrote:
Well, that's interesting You are using the Amanero, right. Still OK
at high bits rates? (With a few hacks, I could kind of get it to be
mostly glitch free = 96k, but any higher and the drop-outs were
severe.) Have you tried 192k and 384k? Still good?
Yes running the
JackOfAll wrote:
Castalla,
I tried but I couldn't reproduce this, so that's why I asked for you to
send me one of your mp3 files. I see what you mean about the elapsed
time jumping back at the end of the track, when there isn't a next track
to play, but I'm not getting any unwanted noise
castalla wrote:
Is there any way I could install the same LMS as you - the 258 version.
The 258 version is the latest version in the testing repo, which i
thought you had already installed on Cubie?
Code:
sudo yum --enablerepo=community-squeeze-testing update
slackhead wrote:
Squeezelite runs with these settings: -o front:CARD=Amanero,DEV=0 -a
300:4:32:1 -n Pi
Not mentioned in previous post - I did have an issue with rsyslogd
logging delay problems very frequently which was fixed as discussed
here:
Ooops! Yes, I had that - that's the version where I initially got the
problem. So, I downgraded! Seems that's not the problem, then.
I just put a new set of music files on the system. Guess what? Plays
last item without noise!
I'm going to put the 'offending' files back - and see what
castalla wrote:
As I said - baffled - and believing even more firmly in the concept of
'computer voodoo'!!!
LOL. Computer Voodoo, that's it! I've listened to the last 15 seconds of
Georgia on My Mind about 30 times now. I used to like the track! ;)
JackOfAll wrote:
If you're running with nrpacks=1, that kind of explains why you need a
300ms buffer. I'm not convinced that generating an interrupt for every
USB data packet is helping. But hey, if it works for you, then great!
Do you know of any other way around this?
I can run with a
JackOfAll wrote:
LOL. Computer Voodoo, that's it! I've listened to the last 15 seconds of
Georgia on My Mind about 30 times now. I used to like the track! ;)
Not sure - I've just noticed that the 'noisy' tracks have bitrate set as
VBR. All my other tracks have CBR.
Possible?
Thought I'd do some quick tests again...
Running Amanero with -a 60:4:32:1 and playing my 192k track and all
seems fine, no glitches or dropouts that I can make out. This with the
RPi on a wired network with SBS running on a separate Fedora server.
I will keep it running with the small
castalla wrote:
Possible?
Anything is possible! ;) I vaguely remember a few years ago, pulling a
couple of mp3 tracks off a loaned portable player. Those tracks had
completely screwed-up tags at the end of the file. Can't remember what
software on the PC I was using to play them at the time,
castalla wrote:
Not sure - I've just noticed that the 'noisy' tracks have bitrate set as
VBR. All my other tracks have CBR.
Possible?
I have thousands of mp3 VBR tracks. So there could be something odd with
some particular tracks, but there is certainly no problem with LMS
playing VBR mp3
slackhead wrote:
Thought I'd do some quick tests again...
Running Amanero with -a 60:4:32:1 and playing my 192k track and all
seems fine, no glitches or dropouts that I can make out. This with the
RPi on a wired network with SBS running on a separate Fedora server.
I will keep it
garym wrote:
I have thousands of mp3 VBR tracks. So there could be something odd with
some particular tracks, but there is certainly no problem with LMS
playing VBR mp3 files.
Well, after a router reboot, now the file plays to end without noise!?
BUT if I then choose another track there's a
Shutdown wrote:
You seem to have solved a rather large issue with audio streaming on the
Pi :-)
Not me! I've just been lucky enough to find other peoples experiences
and put them together in a manners that appears to function well.
It's still early days - I've had the RPi for less than
I played the same noisy track on my SB Radio - no noise.
Reinstalled Touch from scratch - noisy track ends without noise BUT
switch to new track and there's a horrendous click.
I'm lost on this one.
castalla's Profile:
JackOfAll,
would you be so kind as to, at your convenience, prepend the following
language selection definitions to the file
ApplicationResources_sv.properties.
Code:
##
## Language
##
language.language = Språk
language.select = Välj...
language.en =
Gandhi wrote:
JackOfAll,
would you be so kind as to, at your convenience, prepend the following
language selection definitions to the file
ApplicationResources_sv.properties.
'Swedish language properties update from Gandhi.'
Pascal Hibon wrote:
It seems that my Wandboard is caught in an endless reboot loop. One of
the things it spits out of the serial port, and gets me worried, during
the endless reboot is this:
Code:
U-Boot 2013.04-rc2-dirty (Apr 10 2013 - 23:00:21)
Hi Guys,
my wandboard arrived today, yay! I followed the quick start guide and
everything worked well. I have some feedback on the instructions which
I'll write up and post in a bit. Unfortunately, I am now getting out of
my depth and I would appreciate a little help. I am interested in
getting
Chunkywizard wrote:
Hi Guys,
my wandboard arrived today, yay! I followed the quick start guide and
everything worked well. I have some feedback on the instructions which
I'll write up and post in a bit. Unfortunately, I am now getting out of
my depth and I would appreciate a little help.
Chunkywizard wrote:
Hi Guys,
my wandboard arrived today, yay! I followed the quick start guide and
everything worked well. I have some feedback on the instructions which
I'll write up and post in a bit. Unfortunately, I am now getting out of
my depth and I would appreciate a little help.
albertone74 wrote:
Clive,
Today for the first time ever since I have been using the RC3, the
wandboard got stuck (I was actually updating jivelite..) and there was
no way to SSH to it either. So I had to re-write the image to the SD and
start everything again. So, after updating the CSOS,
Hi JackofAll
Just got my DAC working with the Wandboard, here are the details:
Name: HifiMeDiy Sabre USB DAC
URL: http://hifimediy.com/index.php?route=product/productproduct_id=83
Driver: Sorry don't know
Max Rate: 96k/24-bit
Class: UAC2 (I think) uses a TenorTE7022L USB chip
Used by: Stoker
Pascal Hibon wrote:
I
But to answer your question, the latest is version 3.0.35-cm36+.
Hi,
Thanks. I have just updated it!
albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863
View this
Thanks for your help, I'm currently reading a lot of websites :-S Share
is mounted and LMS is scanned my music. By the way, if anyone else tries
this then note the webUI file systems page has an easy way of doing what
I was doing with PuTTY. I only noticed that after hand editting
/etc/fstab !
'Italian language properties update from Alberto.'
(https://github.com/CommunitySqueeze/Web-GUI/commit/769160f6555802fc2ab26ffa79fe3cdf2d08c5ff)
Will be in the next community-squeeze-web build. Thank you.
JackOfAll's
Triode wrote:
I am keen to get feedback on this change as it changes how jivelite
starts up first time. To try to support TVs and monitors which only do
1080p and thoses which only do 720p, this version starts up in VGA mode
and then asks you to select a skin. I am working on the basis
Chunkywizard wrote:
Thanks for your help, I'm currently reading a lot of websites :-S Share
is mounted and LMS is scanned my music. By the way, if anyone else tries
this then note the webUI file systems page has an easy way of doing what
I was doing with PuTTY. I only noticed that after hand
albertone74 wrote:
Hi triode,
Just for a quick feedback on it. After the latest jivelite update I
didn't have to manually edit the file as I was used to do it! That's
great!!!
The only problem I have is that I can't use FLIRC anymore...
Thanks!
There should be no changes to that... Can
Pascal Hibon wrote:
Never mind; it was caused by a faulty power supply...
Ah, OK.
NB. The bad CRC can be ignored. It will always do that. (ie. it's not
specific to CSOS.) Wouldn't have had anything to do with your real issue
(power supply) anyway.
Chunkywizard wrote:
I followed the quick start guide and everything worked well. I have some
feedback on the instructions which I'll write up and post in a bit.
Yes, please do. Ian who wrote the Quick Start Guide has write access to
github, and is adding to it at the moment. I would suggest
Stoker wrote:
Name: HifiMeDiy Sabre USB DAC
URL: http://hifimediy.com/index.php?route=product/productproduct_id=83
Driver: Sorry don't know
Max Rate: 96k/24-bit
Class: UAC2 (I think) uses a TenorTE7022L USB chip
Used by: Stoker
OK, that's good. The TE7022 was also on my stay away from
Rather than anyone getting upset, or thinking that I am ignoring
them. I had a couple of things slip through the cracks yesterday.
Someone I should have got back to and a document from Triode that I
didn't know I had. (I dealt with 35 emails yesterday relating to CS and
a few PM's. So it's
Triode wrote:
There should be no changes to that... Can you confirm that it works
with a usb keyboard? If so what does flirc do when you open a text
editor and use it - is it giving the key presses you expect?
Triode,
I re-installed jivelite again..rebooted and now everything is working
JackOfAll wrote:
Yes, please do. Ian who wrote the Quick Start Guide has write access to
github, and is adding to it at the moment. I would suggest that if he
has time to, he should be the point man for the QSG and perhaps could
incorporate any feedback or additions you, (or anyone else
Can someone give me a quick tutorial on how to set up Pandora with
squeezelite? I have seen references to people using Pandora and
squeezelite, but I have not found a way to make it work.
I have Pandora playing fine on my SB2 and Radio, but when I select the
Pandora app from the server while
This is utterly bizarre. I have no explanation for this observed
issue.
After hours of fudging with reinstalls, recoding the original offending
audio file(s) umpteen times - there are 2 of the 'buggers' - with no
postive outcome - either a noise blast at the end of the file, or when
this was
COMMUNITY-SQUEEZE-WEB-1-49.20130430GITDE7173E
Changes...
Code:
* Tue Apr 30 2013 - 1-49.20130430gitde7173e
- Latest git revision de7173e5.
- Swedish language properties update from Gandhi.
- Italian language properties update from Alberto.
- Add USB DAC list.
39 matches
Mail list logo
