destination card:
> on openCard
> startTimer
> end openCard
thanks, but now I will navigate to the "timer" card without visual effect (real
or fake).
My customer said that is OK. :-)
Best
Klaus
--
Klaus Major
https://www.major-k.de
https://www.major-k.de/bass
kl..
>
> you may have missed this in my last posting:
Klaus,
Indeed I did.
JimL
P.S. Another possibility you could also fake a transition. Then start your
timer in the openCard handler of your destination card.
In starting card:
on fakeTransition
lock screen
import snapshot from
Hi Pauil,
> Am 03.05.2023 um 22:24 schrieb Paul Dupuis via use-livecode
> :
>
> If I have followed this thread:
> 1) Klaus executes a go to with a visual effect using an effect rate of
> X millisecs
> 2) Klaus need to start a time on how long the user of the app has to
If I have followed this thread:
1) Klaus executes a go to with a visual effect using an effect
rate of X millisecs
2) Klaus need to start a time on how long the user of the app has to
answer a question once the card is displayed
I believe the order is:
1) preOpencard handler (if one) is
im,
>
>> Am 03.05.2023 um 20:18 schrieb Jim Lambert via use-livecode
>> :
>>
>>> Problem for me ist to measure the time until the user hits a key after a
>>> question
>>> appears on the screen on the card.
>>> And I start this on "open
Hi Jim,
> Am 03.05.2023 um 20:18 schrieb Jim Lambert via use-livecode
> :
>
>> Problem for me ist to measure the time until the user hits a key after a
>> question
>> appears on the screen on the card.
>> And I start this on "opencard", so the V
> Problem for me ist to measure the time until the user hits a key after a
> question
> appears on the screen on the card.
> And I start this on "opencard", so the VISUAL effect, what the user really
> sees,
> MUST have been terminated, but obviously "opencar
take another look at my results from the Message Watcher:
...
preopencard 7:01:46 PM (0)
opencard 7:01:46 (3)
...
Three milliseconds, not ticks, difference for a visual effect with the
"effectrate" set to 300?
It LOOKS like 300 milliseconds, but definitively not like 3 millseconds.
Th
Klaus.
That was fun.
Oh yes, the point of this thread. To me it seems that preOpenCard is sent
before, and openCard is sent after the effect terminates. The fact that you
have 0 and 3 ticks is no different than having 0 and 125 ticks, The speed of
the visual effect is not pertinent.
Well
opencard 7:01:46 (3)
> ...
> I may be a bit slow, but what does the three millisecs difference tell me? 8-)
> That everyting (pre- and opencard) does in fact happen AFTER the visual
> effect?
any hints still welcome...
Best
Klaus
--
Klaus Major
https:/
not on the forums.
the bigger brains are here.
less noise here
better behavior here
On Wed, May 3, 2023 at 12:27 AM J. Landman Gay via use-livecode <
use-livecode@lists.runrev.com> wrote:
> You and my husband should go have a drink together. ;)
> --
> Jacqueline Landman Gay | jac...@hyperactivesw
You and my husband should go have a drink together. ;)
--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software | http://www.hyperactivesw.com
On May 2, 2023 5:58:07 PM Bob Sneidar via use-livecode
wrote:
I can attest that as an old timer, if I am not very careful, I can provi
I can attest that as an old timer, if I am not very careful, I can provide a
very wide pool. ;-)
Bob S
On May 2, 2023, at 15:52, J. Landman Gay via use-livecode
wrote:
Well, it works better for *you*. I want info to come to me, I don't want to
search. My right hand doesn't like all that clic
tgun
this with the forum. 8-)
If you do I will send you the stack I made that seems to indicate that
“openCard” is sent after the visual effect terminates.
Thank you, but I do not need any other example stack, I want to know it
with my stack and I also want to know
why there are difference
>> If you do I will send you the stack I made that seems to indicate that
>> “openCard” is sent after the visual effect terminates.
>
> Thank you, but I do not need any other example stack, I want to know it with
> my stack and I also want to know
> why there are differences betwe
ry to
outgun
this with the forum. 8-)
> If you do I will send you the stack I made that seems to indicate that
> “openCard” is sent after the visual effect terminates.
Thank you, but I do not need any other example stack, I want to know it with my
stack and I also want to know
why there
Jacque.
Go to the forum. I did just that, and the “openCard” message appears in the
message watcher exactly after the visual effect finishes.
Craig
> On May 2, 2023, at 1:08 PM, Klaus major-k via use-livecode
> wrote:
>
> Hi Jacque,
>
>> Am 02.05.2023 um 18:59 schri
Klaus.
Come back from the dark side. If you do I will send you the stack I made that
seems to indicate that “openCard” is sent after the visual effect terminates.
Craig
> On May 2, 2023, at 1:08 PM, Klaus major-k via use-livecode
> wrote:
>
> Hi Jacque,
>
>> Am 02.05.
t what does the three millisecs difference tell me? 8-)
That everyting (pre- and opencard) does in fact happen AFTER the visual effect?
Best
Klaus
--
Klaus Major
https://www.major-k.de
https://www.major-k.de/bass
kl...@major-k.de
___
use-livecode m
Open the message watcher and compare its report to what you see on screen.
That might help.
--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software | http://www.hyperactivesw.com
On May 2, 2023 11:19:41 AM Klaus major-k via use-livecode
wrote:
Someone knowing please chime i
e
>
> on mouseUp
> put the ticks into tTime
> visual effect "checkerBoard" slow
> go cd 2
> end mouseUp
>
> In the card 2 script:
> global tTime
> on openCard
> put the ticks - tTime into fld 2
> end openCard
>
> I get about 60 ticks, so it
Hi all,
> Am 02.05.2023 um 18:07 schrieb Klaus major-k via use-livecode
> :
>
> Hi Håkan
>
>> Am 02.05.2023 um 17:56 schrieb Håkan Liljegren via use-livecode
>> :
>>
>> AFTER!
>>
>> Create two cards
>> Add a button or something on the
-Original Message-
From: use-livecode [mailto:use-livecode-boun...@lists.runrev.com] On Behalf Of
Klaus major-k via use-livecode
Sent: Tuesday, May 02, 2023 12:08 PM
To: How to use LiveCode
Cc: Klaus major-k
Subject: Re: opencard and visual effect
Hi Håkan
> Am 02.05.2023 um 17:56 schr
Klaus.
Why aren’t you doing this in the forum???
I made a stack with two cards. Card 1 has a button on it:
global tTime
on mouseUp
put the ticks into tTime
visual effect "checkerBoard" slow
go cd 2
end mouseUp
In the card 2 script:
global tTime
on openCard
put the ticks -
Hi Håkan
> Am 02.05.2023 um 17:56 schrieb Håkan Liljegren via use-livecode
> :
>
> AFTER!
>
> Create two cards
> Add a button or something on the first card with the code
> on mouseUp
> visual effect dissolve slow
> go to next card
> end mouseUp
>
&g
AFTER!
Create two cards
Add a button or something on the first card with the code
on mouseUp
visual effect dissolve slow
go to next card
end mouseUp
On the second card add a control and the hide it and add the script to the card:
on opencard
show control 1
end opencard
You will then
Hi Craig,
> Am 02.05.2023 um 16:05 schrieb Craig Newman via use-livecode
> :
>
> Klaus.
>
> I would guess that as soon as the card was navigated to, that is, before any
> visual effect starts or finishes.
> Not sure how to test this since I am not sure what messages o
Klaus.
I would guess that as soon as the card was navigated to, that is, before any
visual effect starts or finishes.
Not sure how to test this since I am not sure what messages or properties might
be set before, during or after a visual effect runs.
Craig
> On May 2, 2023, at 9:06 AM, Kl
Hi friends,
quick question:
Will "opencard" be sent to a card AFTER the card was navigated to
with a visual effect or already during the effect?
I cannot tell actually in my stack.
Best
Klaus
--
Klaus Major
https://www.major-k.de
https://www.major-k.de/bass
kl...@
Hi.
I never use visual effects, but I think you may need to go to the dictionary.
One thing it says is:
"The visual effect command affects only navigation within a window. If you
want to create a transition effect when moving between stacks, use the go...in
window form of the go co
Thanks Scott. I should read the whole command. I only got as far as the
examples for cards.
Bob S
> On Apr 18, 2020, at 12:15 PM, scott--- via use-livecode
> wrote:
>
> From the docs:
>
> The visual effect command affects only navigation within a window. If you
From the docs:
The visual effect command affects only navigation within a window. If you want
to create a transition effect when moving between stacks, use the go...in
window form of the go command :
visual effect "wipe down"
go stack Index in window "Part 2" -- repl
visual effect reveal down very slow
breakpoint
end mouseUp
homestack() simply returns the file path of the main stack, which this button
is on.
The visual result is indistinguishable from simply showing and hiding the
stack.
Bob S
___
use
I am getting a "flicker" instead of a "dissolve" in LC9.5 + latest iOS on
iPhone 12.4.1
command loadNewImage pPath
lock screen for visual effect
set the filename of sMainImage to pPath
setImageToFullCardLoc sMainImage, "portrait", 0,0
What Jacque said;
Originally you had built the standalone with LC 9.0.1 rc1 (and installed it
in the device), so its manifest had targetSDKversion=26.
Then you built a new one with LC 9.0.0, so it had its targetSDKversion
equal to the minSDKversion, as specified in the standalone settings, and
pro
It could be because 9.0.1 sets the target version in the manifest to 26
and 9.0 sets it to the same version as the one you select in the
dropdown menu in standalone settings. If you've truly removed the old
app completely I wouldn't think it would matter, but apparently Android
stores some reco
gt; Cheers
> >> >
> >> > Monte
> >> >
> >> > > On 20 Jul 2018, at 9:54 am, Monte Goulding via
> use-livecode <
> >> use-livecode@lists.runrev.com> wrote:
> >> > >
> >> >
ion from the large number of
>> acceleratedRendering related patches that went into 9.0.1 rc 1. I am
>> looking into it as it will be a blocker for 9.0.1-rc-2.
>> > >
>> > > Cheers
>> > >
>> >
>
>> > > This looks like a regression from the large number of
>> acceleratedRendering related patches that went into 9.0.1 rc 1. I am
>> looking into it as it will be a blocker for 9.0.1-rc-2.
>> > >
>> > > Cheers
ooks like a regression from the large number of
> acceleratedRendering related patches that went into 9.0.1 rc 1. I am
> looking into it as it will be a blocker for 9.0.1-rc-2.
> > >
> > > Cheers
> > >
> > > Monte
have
acceleratedRendering on, the effect is not applied when doing this:
>>
>> lock screen for visual effect
>> //do something
>> unlock screen with visual effect wipe left //any effect fails
>>
>> However, if
dering on, the effect is not applied when doing this:
>>
>> lock screen for visual effect
>> //do something
>> unlock screen with visual effect wipe left //any effect fails
>>
>> However, if accelera
>
> Cheers
>
> Monte
>
>> On 20 Jul 2018, at 4:13 am, Dan Friedman via use-livecode
wrote:
>>
>> Hello!
>>
>> Using LC 9.0.1 (rc1), on android only, if I have acceleratedRendering
on, the effect is not applied w
r 9.0.1-rc-2.
>
> Cheers
>
> Monte
>
>> On 20 Jul 2018, at 4:13 am, Dan Friedman via use-livecode
>> wrote:
>>
>> Hello!
>>
>> Using LC 9.0.1 (rc1), on android only, if I have acceleratedRendering on,
>> the effect is not applied when do
!
>
> Using LC 9.0.1 (rc1), on android only, if I have acceleratedRendering on, the
> effect is not applied when doing this:
>
> lock screen for visual effect
> //do something
> unlock screen with visual effect wipe left //any effect fails
>
> However, if accelerate
Hello!
Using LC 9.0.1 (rc1), on android only, if I have acceleratedRendering on, the
effect is not applied when doing this:
lock screen for visual effect
//do something
unlock screen with visual effect wipe left //any effect fails
However, if acceleratedRendering is off, the visual effect is
Ha! Klaus.. Jai Ganesha! Awesome this works (yet to test on mobile)
on mouseUp
set the effectrate to 500
lock screen for visual effect
put the long Id of image "stone" into pHiddenImage
put the long Id of image "night" into pVisibleImage
show t
d some tests…wondering about the engine's timing work with visual
> effects:
Use "the effectrate" to set the duration of the "very slowly" (sic!) visual
effect.
Mentally a bit challenging, but works! :-D
> ...
> Are simultaneous visual effects + some process ev
l"
Btn 1:
on mouseUp
put empty into fld "bool"
hide image burger with visual effect dissolve very slowly
put "false" into fld "bool"
answer "Are U Hidden Yet?" with "Yes" or "No"
end mouseUp
btn 2:
on mouseUp
put empty into fld "b
On 10/11/16 3:52 PM, Devin Asay wrote:
On Oct 11, 2016, at 2:26 PM, J. Landman Gay
wrote:
Do you know if "very fast" is no longer "as fast as the machine
will go"? That used to be the case.
It’s not that any more. It is all relative to the effectRate
property.
Thanks, that's good to know.
Hi Mike,
This old stack provides an useful visual reference
for every visual effect:
https://dl.dropboxusercontent.com/u/3834621/demoMC27_no_sounds.livecode
Alejandro
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url
> On Oct 11, 2016, at 2:50 PM, Mike Kerner wrote:
>
> Devin, I should have mentioned this, but I made my dialog translucent, so
> the scroll down effect won't look right since it causes the underlying card
> to slide into view, when what I'm trying to get is the effect of the
> overlay sliding o
ys:
"By default, the effectRate property is set to 2000 (2 seconds)."
"You can specify five speeds with the visual effect command: very fast, fast,
normal, slow, or very slow. The effectRate property specifies how long a very
slow visual effect takes."
So all of the speed set
>
>>>>
>>>> On Oct 11, 2016, at 8:46 AM, Mike Kerner
>>>>> wrote:
>>>>>
>>>>> I am trying to give the user the illusion that a dialog is sliding into
>>>>> view and out of view. The dialog is a rectangle graphic
Tactile Media, UX/UI Design
>>
>> On Oct 11, 2016, at 11:19 AM, Devin Asay wrote:
>>>
>>>
>>> On Oct 11, 2016, at 8:46 AM, Mike Kerner
>>>> wrote:
>>>>
>>>> I am trying to give the user the illusion that a dialog is slidin
round, with
controls. Showing it is easy - show x with visual effect scroll up very
fast. When I want to hide it though, hide x with visual effect scroll down
very fast instead shows the underlying card moving, not the group that
represents the dialog. I could write a loop to physic
AM, Mike Kerner wrote:
>>
>> I am trying to give the user the illusion that a dialog is sliding into
>> view and out of view. The dialog is a rectangle graphic background, with
>> controls. Showing it is easy - show x with visual effect scroll up very
>> fast. When
> On Oct 11, 2016, at 8:46 AM, Mike Kerner wrote:
>
> I am trying to give the user the illusion that a dialog is sliding into
> view and out of view. The dialog is a rectangle graphic background, with
> controls. Showing it is easy - show x with visual effect scroll up very
easy - show x with visual effect scroll up very
fast. When I want to hide it though, hide x with visual effect scroll down
very fast instead shows the underlying card moving, not the group that
represents the dialog. I could write a loop to physically move the dialog,
but that doesn't s
wait - got it - to slide the graphic over the card
show x with visual effect scroll up very fast #push up works, too
to move it off screen
hide x with visual effect reveal down very fast
On Tue, Oct 11, 2016 at 10:46 AM, Mike Kerner
wrote:
> I am trying to give the user the illusion tha
I am trying to give the user the illusion that a dialog is sliding into
view and out of view. The dialog is a rectangle graphic background, with
controls. Showing it is easy - show x with visual effect scroll up very
fast. When I want to hide it though, hide x with visual effect scroll down
I solved the problem myself.
There is a caveat with animationEngine… I don’t understand it completely
but
on aeMoveDone
nextEvent
end aeMoveDone
will fire too soon or “cuts out” part of the actions of the subsequent commands
being invoked on the card we go to, as well as the visual eff
into tEvent
switch tEvent
case "nextStage" # set/called when all scenes are done on a card
put the uNextStage of this stack into tNextCard
visual effect dissolve very fast
go to card tNextCard
break
case "scene2"
send "scene2" to this card # almost always is one
break
nlock screen with visual effect, that came about with the release of
> Yosemite and all recent releases of LC. I think I may have discovered the
> cause.
>
> The problem seems to be exacerbated by having plugin stacks open. My setup
> was to have 2 of my favorite plugins au
Some time ago, I reported a problem with random screen flashes related to
unlock screen with visual effect, that came about with the release of Yosemite
and all recent releases of LC. I think I may have discovered the cause.
The problem seems to be exacerbated by having plugin stacks open. My
er.
> Again, this tends to overload the main stack when substacks would be a
> better way to manage the content.
>
> Or: use "sheet" and be content with the "drop from the top" default effect.
>
> BR
>
> Scott Rossi wrote:
>> I don't know
t Rossi wrote:
I don't know that it has ever been possible to use a visual effect when
launching a stack. Can you point to a version of LiveCode where this works?
The only stack-level "effects" I've been able to manage are a
dissolve-into-view effect by setting the stack'
I don't know that it has ever been possible to use a visual effect when
launching a stack. Can you point to a version of LiveCode where this works?
The only stack-level "effects" I've been able to manage are a
dissolve-into-view effect by setting the stack's blendLev
John: right... I did read the dictionary.
but we don't want the substack being revealed to take over the window of
the main stack.
and, this doesn't work:
on mouseUp
visual effect reveal up very slowly
go stack "Choose Date" in new window
end mouseUp
I presume, b
Read the dictionary...
'The visual effect command affects only navigation within a window. If
you want to create a transition effect when moving between stacks, use
the go...in window form of the go command:'
> Date: Mon, 22 Dec 2014 20:58:40 -1000
> From: bra...@hindu.org
&g
I have a main stack and a substack
this button on the main stack is meant to open the substack and show it
with a visual effect.
It doesn't work... the substack just "snaps" open
LC 6.6.2 OS X Mavericks
on mouseUp
go invisible stack "choose date"
show stack
Kay C Lan wrote:
> The Dictionary is in need of a thorough update...
The team's been doing pretty quick work on Dictionary entries whenever
reported. If you find one that contains erroneous info, please file a
report on it.
Thanks -
--
Richard Gaskin
Fourth World Systems
Software Design
On Thu, Aug 14, 2014 at 5:56 AM, Mark Schonewille
wrote:
> At some point in time, the syntax changed. The new syntax is
>
> lock screen for visual effect
> // do a bunch of stuff here
The Dictionary is in need of a thorough update, but thankfully this is
not one of them. Mark has
Hi Fred,
At some point in time, the syntax changed. The new syntax is
lock screen for visual effect
// do a bunch of stuff here
unlock screen with visual effect dissolve
Dissolve should work on any platform. Some effects only work on a
specific platform. It is also possible that a combination
ld" to not the visible of fld “thisField”
set the vscroll of group “ThisGroup” to 10 + (the Vscroll of group
“ThisGroup”)
unlock screen with visual effect dissolve
end mouseUp
(Using Mac OS 10.9)
Thanks
Fred Moyer
___
use-live
Hi friends,
1. I have a stack "stack1" and a substack "stack2"
2. "stack1" only has one button
3. When I use this in the button script:
on mouseUp
lock screen for visual effect
go stack "stack2" in window of stack "stack1"
unlock screen
:
> >
> > I don't think there's a way to use a visual effect to deal with the stack
> > size change, or is there?
> >
>
> Pete, check out "revChangeWindowSize"
>
> Hank
>
>
> ___
> use-live
>
> I don't think there's a way to use a visual effect to deal with the stack
> size change, or is there?
>
Pete, check out "revChangeWindowSize"
Hank
___
use-livecode mailing list
use-livecode@lists.runrev.com
Pl
o its
original value.
All that works just fine but the group has the nice visual effect to it
when it's shown/hidden whereas the change in stack size is instantaneous.
I don't think there's a way to use a visual effect to deal with the stack
size change, or is there?
I have tried d
Hi Klaus,
Got it… thank you.
be well,
randy
-
On Jan 9, 2014, at 9:54 AM, Klaus major-k wrote:
> Hi Randy,
>
> Am 09.01.2014 um 15:22 schrieb Randy Hengst :
>
>> ...but where in your scripts is "Zoom Open" or closed? I couldn't find it.
>> Sound
Hola Al,
Am 09.01.2014 um 21:59 schrieb Alejandro Tejada :
> Many Thanks Klaus for answering! :D
My pleasure :-)
But when started this visual effect (zoom in/out) to REALLY zoom in/out (an
image)???
Last time I used this effect, must be several year ago, maybe even at my
Metacard days, th
Many Thanks Klaus for answering! :D
Klaus major-k wrote
>> ...but where in your scripts is "Zoom Open" or closed? I couldn't find
>> it. Sounds worked.
> put "visual effect" && the selectedText of field "Effect Name" && the
Hi Randy,
Am 09.01.2014 um 15:22 schrieb Randy Hengst :
> ...but where in your scripts is "Zoom Open" or closed? I couldn't find it.
> Sounds worked.
...
put "visual effect" && the selectedText of field "Effect Name" && the label
in advance!
>
> Al
>
>
>
>
> --
> View this message in context:
> http://runtime-revolution.278305.n4.nabble.com/Visual-Effect-Zoom-Open-and-Zoom-Close-tp4674550.html
> Sent from the Revolution - User mailing list archive at Nabble.com.
>
> _
View this message in context:
http://runtime-revolution.278305.n4.nabble.com/Visual-Effect-Zoom-Open-and-Zoom-Close-tp4674550.html
Sent from the Revolution - User mailing list archive at Nabble.com.
___
use-livecode mailing list
use-livecode@lists.runre
On Jan 18, 2013, at 2:18 PM, Scott Rossi wrote:
> One simulated effect I've done is to create a loop that progressively sets
> the blendLevel of a stack, which results in fading the stack in (or out
> of) the desktop.
Here's from the script of the first card of a splash stack that I use:
on open
h Screen window is the way
> >it fades on. You can download the source code by clicking the link button
> >below.
> >
> >Have a nice weekend!
> >
> >Al
> >
> >
> >
> >
> >--
> >View this message in context:
> >
> http://run
You have strange dreams. In mine, scantily clad beautiful women seem to
magically show up. But hey, to each his own! ;-)
Bob
On Jan 18, 2013, at 11:18 AM, Scott Rossi wrote:
> But when asking about it
> much later, nobody could recall if (or how) it was done, so maybe it was
> just a dream (ev
en Source Code
>One of the interesting things about this Splash Screen window is the way
>it fades on. You can download the source code by clicking the link button
>below.
>
>Have a nice weekend!
>
>Al
>
>
>
>
>--
>View this message in context:
>http://ru
by clicking the link button
> below.
>
> Have a nice weekend!
>
> Al
>
>
>
>
> --
> View this message in context:
> http://runtime-revolution.278305.n4.nabble.com/Desktop-visual-effect-tp4659122p4659135.html
> Sent from the Revolution - User mailing list archive at
u can download the source code by clicking the link button
below.
Have a nice weekend!
Al
--
View this message in context:
http://runtime-revolution.278305.n4.nabble.com/Desktop-visual-effect-tp4659122p4659135.html
Sent from the Revolution - User mailing list arc
done, so maybe it was
> just a dream (even if this worked it would be Mac only).
>
> Regards,
>
> Scott Rossi
> Creative Director
> Tactile Media, UX Design
>
>
>
>
> On 1/18/13 11:08 AM, "Peter Haworth" wrote:
>
> >I'm probably missing so
omething obvious but I can't get the visual effect
>command to do anything.
>
>I issue the visual effect command right before opening a stack, hoping
>that
>the stack would appear according to the chosen effect, but no matter which
>effect I choose, the stack appears with
ssing something obvious but I can't get the visual effect
> > command to do anything.
> >
> > I issue the visual effect command right before opening a stack, hoping
> that
> > the stack would appear according to the chosen effect, but no matter
> which
> >
Hi Pete,
Am 18.01.2013 um 20:08 schrieb Peter Haworth :
> I'm probably missing something obvious but I can't get the visual effect
> command to do anything.
>
> I issue the visual effect command right before opening a stack, hoping that
> the stack would appear accor
I'm probably missing something obvious but I can't get the visual effect
command to do anything.
I issue the visual effect command right before opening a stack, hoping that
the stack would appear according to the chosen effect, but no matter which
effect I choose, the stack appears w
On 11/26/12 11:20 AM, Magicgate Software - Skip Kimpel wrote:
I want to transition between cards but keep a group (background and menu
called "MainMenuAndBackground" in place without experiencing the effect
results. Is this possible?
If the parts that should show with a visual
It is possible to hide other groups with visual effects, this works…
hide group "groupControls1" with visual effect dissolve slow
go cd 2
show group "groupControls2" with visual effect dissolve slow
…Assuming you can group the rest of the controls separately. I just
This would be for mobile devices
SKIP
On Mon, Nov 26, 2012 at 1:07 PM, Robert Sneidar wrote:
> I don't think you can within the same app. You *could* make a standalone
> as a system window which will float above other apps, launch it with
> Applescript and show it just before you transitio
I don't think you can within the same app. You *could* make a standalone as a
system window which will float above other apps, launch it with Applescript and
show it just before you transition, then hide or quit it after the transition.
It's an ugly hack, but it is how I do animated dialogs or p
1 - 100 of 164 matches
Mail list logo
