We have enabled "Bypass internal dns, use external dns1 and dns2" from the
zone settings and it started resolving.
Simon and Dag, Thank you.
Cheers!!
On Sat, Oct 7, 2017 at 11:39 AM, Tejas Sheth <tshet...@gmail.com> wrote:
> Hello Dag Sonstebo,
>
> First of al
t letting the clients use the VR for DNS
forwarding, rather than going direct?
Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
On 06/10/2017, 09:37, "Tejas Sheth" <tshet...@gmail.com> wrote:
Hello,
We started facing strange issue with cloudstack VM. where all the
VMs
Hello,
We started facing strange issue with cloudstack VM. where all the VMs in
one particular tenant are not able to resolve DNS. since we are using
advanced networking we have tried to reboot virtual router and other DNS
services. still that particular tenant is not able to resolve the DNS.
If those VMs has internet access then you can use Azure ASR to migrate VM
from cloudstack to Azure.
On Mon, Oct 2, 2017 at 11:28 PM, kotipalli venkatesh <
venkateshcloudt...@gmail.com> wrote:
> Hi All,
>
>
>
> We are planning to migrating cloudstack VM’s to Azure Public cloud. Did
> anyone done
; we knew the disks were available on the new storage. The problem was if
> > we
> > > stop those migrated VM, they could not be restarted due to DB
> corruption,
> > > thus the need to fix DB to point to correct volumes.
> > >
> > > If you migrated you
Hi,
I searched for few documents but in all documents they are mentioning
that VHD will be available on destination storage (but database will point
to source storage)
In our case VHD file is missing from source and destination storage.
Hi,
We have xenserver 6.2 with cloudstack 4.3.1. We had initiated the data
disk migration from one primary storage to another. after the operation we
were not able to start the VM.
when we checked the xenserver storage, we were not able to find the VHD
in any of the primary storage.
Its a
Hello venkat,
Just increase cpu and mem overcommitment setting in global configuration.
Thanks,
Tejas
Sent from Nine
From: kotipalli venkatesh
Sent: Apr 6, 2016 3:36 PM
To: users@cloudstack.apache.org
Subject: VR issue High importance
Hi All,
when we are
-get.eu/centos/4.5/
This is what will be 4.5.2 soon:
http://jenkins.buildacloud.org/view/4.5/job/package-rhel63-4.5/
If you encounter problems, let us know on d...@cloudstack.apache.org
Regards,
Remi
-Original Message-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: zaterdag 8
Hello,
We are planing to deploy cloudstack in production with VMware and
cloudstack in large scale production environment (100+ accounts with 200+
VMS) with advanced networking .
We have evaluated multiple hypervisor and we have finalized VMware
vsphere as hypervisor layer. I have following
consider KVM or XenServer? Many people in the
community use this so getting help should be easy.
But VMware as a hypervisor is supported. Maybe someone that runs this can
share some thoughts/tips?
Regards, Remi
On 08 Aug 2015, at 08:44, Tejas Sheth tshet...@gmail.com wrote:
Hello
...@schubergphilis.com
wrote:
Hi Tejas,
We do nested virtualization on KVM (based on CentOS 7.1). Never tried
Hyper-v, but all other hypervisors work fine nested on KVM.
Regards, Remi
On 08 Aug 2015, at 09:32, Tejas Sheth tshet...@gmail.com wrote:
I am a big fan of kvm and xenserver too.
In our
or use the content in any way.
Datacentrix cannot assure that the integrity of this communication
has been maintained nor that it is free of errors, virus, interception or
interference.
-Original Message-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: Saturday, 08 August 2015 10
if it has unintentionally
reached you and do not read, disclose or use the content in any way.
Datacentrix cannot assure that the integrity of this communication
has been maintained nor that it is free of errors, virus, interception or
interference.
-Original Message-
From: Tejas Sheth
:
http://jenkins.buildacloud.org/view/4.5/job/package-rhel63-4.5/
If you encounter problems, let us know on d...@cloudstack.apache.org
Regards,
Remi
-Original Message-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: zaterdag 8 augustus 2015 11:11
To: users@cloudstack.apache.org
Hello Guyz,
May be its a lame question, I just wanted to increase the resource in my
virtual router. so I have created system service offerings with Domain
Router.
Now i have 3 options to upgrade virtual router.
1) Create network offering and add the same to exiting network offerings.
| www.shapeblue.comhtp://www.shapeblue.com/ | Twitter:@cloudstackguru
https://twitter.com/#!/cloudstackguru
ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N
4HSx-apple-data-detectors://5
On 18 Apr 2015, at 11:41, Tejas Sheth tshet...@gmail.commailto:
tshet...@gmail.com wrote
Hello
We have created zone with public traffic. we want to modify the vlan id
of default public ip. how can we achieve this?
thanks
following is the log link
https://s3-ap-southeast-1.amazonaws.com/fbstest/management-server.log
really appreciate in advance
Thanks,
Tejas
On Fri, Apr 17, 2015 at 1:15 PM, Tejas Sheth tshet...@gmail.com wrote:
Hello,
I have deployed cloudstack 4.3 with septate database server. once
. at
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
21. at java.lang.Thread.run(Thread.java:744)
On Fri, Apr 17, 2015 at 2:56 PM, Tejas Sheth tshet...@gmail.com wrote:
really Appreciate your quick response.
kindly find following pastebin link for latest logs
http
I think its because vhd-utils is not installed on cloudstack servers.. let
me try.. i will update you soon
On Fri, Apr 17, 2015 at 3:02 PM, Tejas Sheth tshet...@gmail.com wrote:
i have noticed bellow java error which states that cloudstack is not able
to create VM on primary storage with SR
management logs. Can't say more based on information provided.
Vadim.
-Original Message-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: Friday, April 17, 2015 10:45 AM
To: users@cloudstack.apache.org
Subject: [urgent] not able to start SSVM in new deployment.
Hello,
I
I have deployed cloudstack 4.3 with septate database server. once initial
configuration finishes i do not see any system vm comming up on any of the
Xenservers (6.2 SP1).
I have tried following
1) deployed latest system vm template
2) reset network and reconfigured zone
3) reset entire db
-installation
--
Erik
On Fri, Apr 17, 2015 at 10:22 AM, Tejas Sheth tshet...@gmail.com wrote:
following is the log link
https://s3-ap-southeast-1.amazonaws.com/fbstest/management-server.log
really appreciate in advance
Thanks,
Tejas
On Fri, Apr 17, 2015 at 1:15 PM, Tejas Sheth tshet
/SMlog
~Rajani
On Fri, Apr 17, 2015 at 4:51 PM, Tejas Sheth tshet...@gmail.com wrote:
installed vhd-util on
/usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver and also
i have copied vhd-util to xenservers manually in /opt/xensource/bin
and /opt/cloud/bin and then i added xenservers
30d8270b-b490-28e7-af7e-35875f0a1d31
You will have to check and validate the SR.
On 17-Apr-2015, at 2:04 pm, Tejas Sheth tshet...@gmail.com wrote:
I have deployed cloudstack 4.3 with septate database server. once
initial
configuration finishes i do not see any system vm comming up
Hello,
We have deployed cloudstack usage on management server. we are not able
to find any tool which can provide interactive view of cloudstack usage
with respective cost and billing functionality.
Require your suggestion if anyone is using any such tools with cloudstack.
Thanks
Tejas
On Tue, Mar 31, 2015 at 11:59 AM, Sam Ceylani s...@mistercertified.com
wrote:
There is a service called cloudstack-usage (service cloudstack-usage
status) which you can use to pull usage data
-Original Message-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: Tuesday, March 31, 2015 2
would like to bill
your customer out of the box, me and everbody else is waiting on WHMCS to
release cloudstack plugin, ty
-Original Message-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: Tuesday, March 31, 2015 2:38 AM
To: users@cloudstack.apache.orgmailto:users
Hello,
All the xenserver 6.2 hosts (cloud nodes) went down. When we started all
the xneservers and cloudstack management server most of the VMs came up
expect few VMs.
These VMs are stuck at stopping state. VMs are not visible in xencenter
console for any VM related manipulation.
Can i get
, if there are pending jobs to start them up this could cause some
unintended issues.
--
Erik
On Mon, Mar 23, 2015 at 8:14 AM, Tejas Sheth tshet...@gmail.com wrote:
Hello,
All the xenserver 6.2 hosts (cloud nodes) went down. When we started
all
the xneservers and cloudstack management
Hello Guyz,
We require to install xenserver 6.5 in new servers because of hardware
competibility. We are already using cloudstack 4.3. Does an one have tested
cloudstack 4.3 with xenserver 6.5.
I am really loking for xenserver 6.5 and cloudstack compatibility related
information before
Hi Tejas,
Have you checked whether mannualy you are able to mount nfs share to xen
server or not?
If you are using nas box then check the allowed ip and its permissions.
Thanks,
Tejas
On Jan 5, 2015 7:56 PM, Tejas Gadaria refond.g...@gmail.com wrote:
Hi,
I am facing issue with xenserver
Hello,
I can not help you with application design because it depends on lots of
API calls with CS and public cloud. but i can give you an example.
One of the best example is Cloud brockerage tool. You can devlope
application in PHP and you can use API calls to provision instances in AWS,
Hi,
it would be batter to seprage primary and secondary traffic with seprate
VLANs. If you are using latest CNA adepter then you can seprate traffic by
deviding physical 10G nics with seprate vNICs
1) vNIC 1 : 6G for primary storage
2) vNIC 2: 2G for secondary storage
3) vNIC 3: 2G
for any discrepancy.
-Original Message-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: Sunday, December 14, 2014 4:16 AM
To: users@cloudstack.apache.org
Subject: SSVM weird behavior
Hello guyz,
we were doing HA testing for xenservers. when SSVM restarted to another
host
Hello guyz,
we were doing HA testing for xenservers. when SSVM restarted to another
host in cloudstack VM State stuck to STARTING but agent state is UP . I
tried to upload and ISO to secondary storage which is working fine.
is it because cloudstakc was not able to update the record in
-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: Friday, December 12, 2014 9:01 AM
To: users@cloudstack.apache.org
Subject: Re: How to remove VM entry from CloudStack database?
Hi,
I have tried to change the vm_instance table state value to Stopped
and Destroied but i was nither
Hello,
I have deployed advanced zone and deployed windows 2008 VM instance. The
VM instance is connected to isolated network.
The issue is none of the VMs are getting dhcp address from virtual router.
I tried to restart virtual router but still no DHCP address from vRouter.
Any suggestion?
, Dec 12, 2014 at 2:21 PM, Erik Weber terbol...@gmail.com wrote:
On Fri, Dec 12, 2014 at 9:30 AM, Tejas Sheth tshet...@gmail.com wrote:
Hello,
I have deployed advanced zone and deployed windows 2008 VM instance.
The
VM instance is connected to isolated network.
The issue is none
What is the version of Cloudstack you are using?
correct me if i am wrong, I think 4.3 does not support vmware 5.5 and i am
not sure about CS 4.4.1
Thanks,
Tejas
On Fri, Dec 12, 2014 at 4:24 PM, Erik Weber terbol...@gmail.com wrote:
On Fri, Dec 12, 2014 at 11:32 AM, richard.panf
Hello,
I restarted the network service in virtual router and now vms are able to
get DHCP address.
Thanks,
Tejas
On Fri, Dec 12, 2014 at 4:23 PM, Erik Weber terbol...@gmail.com wrote:
On Fri, Dec 12, 2014 at 11:22 AM, Tejas Sheth tshet...@gmail.com wrote:
Thanks Erik,
Its RESOLVED
Hello,
I was tring migrate vm to another cluster using storage migration option
in Cloudstack 4.3.1.
unfortuanatly now it got stuck at migrating stage and don't know how to
recover.
since it is test environment we can remove it from database.
Does anyone knows how to cleanup VM entry from
:
The image(http://IP/CentOS-6-x86_64-vanilla-kvm.qcow2.bz2) is available
and can be downloaded (tested with wget)
@Tejas: Hypervisor hosts are able to mount the secondary storage
How can I debug this on the SSVM?
Kind regards
Vlad
On 10.12.2014 20:44, Tejas Sheth wrote:
Hi Vlad,
I
Hi Motty,
I think the alert you are receving is about utilization of CPU resource
no the provisioning. If you get error such as not enough resource
available while deploying new instance cpu.overprovisioning helps but if
you are getting high CPU utilization then you need to change your VM
the original message (including any
attachments) in its entirety. Thank you.
-Original Message-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: Thursday, December 11, 2014 9:20 AM
To: users@cloudstack.apache.org
Subject: How to remove VM entry from cloudstack database?
Hello
cleanup activity do we need
to delete any other entry from anyother table?
Thanks,
Tejas
On Fri, Dec 12, 2014 at 8:30 AM, Tejas Sheth tshet...@gmail.com wrote:
Hello,
Its not in production so i can test the DB modification, Let me try to
modify VM entry from vm_instance table and I'll let you
Hi Vlad,
I was also getting the same error few days ago, for me the issue was my
SSVM was not able to mount Secondary storage.
Make sure that all your hypervisor hosts and system vms are able to access
nfs secondary storage.
Thanks,
Tejas
On Thu, Dec 11, 2014 at 1:07 AM, Dave Dunaway
Hello,
Recently i noticed that our proxy vm is not working and when we restart
the proxy vm gives error of stopping apache server and proxy console vm
gives time out message... we are troubleshooting the same.
We checked that our proxy con vm is not listning port 443
Thanks
Tejas
On Dec
29, 2014 at 7:31 PM, Tejas Sheth tshet...@gmail.com wrote:
Hello,
Is it possible to reconfigure network configuration (eg. creation of
bondeding, network port lable change etc.)in xenserver cluster which is
being managed by cloudstack ?
What is the procedure for the same?
Thanks
On Sun, Nov 30, 2014 at 5:26 PM, abhisek basu abhisekb...@msn.com wrote:
Can you please list the exact modifications you are want to perform? Also,
a brief description of present scenario would help.
Sent from my iPhone
On 30 Nov 2014, at 1:40 pm, Tejas Sheth tshet...@gmail.com wrote
Hello,
Is it possible to reconfigure network configuration (eg. creation of
bondeding, network port lable change etc.)in xenserver cluster which is
being managed by cloudstack ?
What is the procedure for the same?
Thanks,
Tejas
Hello,
Can anyone give inputs on pros and cons of Open vSwitch vs bridge
configuration in Xenserver 6.2.?
Which method is more sutable if we don not use advance zone with security
group?
Thanks
Tejas
://download.cloud.com/templates/4.3/systemvm64template-2014-01-14-master-xen.vhd.bz2-h
Go Chiba
E-mail:go.ch...@gmail.com
On Fri, Nov 28, 2014 at 1:48 PM, Tejas Sheth tshet...@gmail.com wrote:
Hello,
We are using cloudstack 4.3 with system vm template deployed from
bellow
link.
u
http
2 xenserver cluster each with 5 hosts. total approximate 500 vms with
advanced zone configured in cloudstack 4.3. storage is FC
On Fri, Nov 28, 2014 at 1:37 PM, Andrija Panic andrija.pa...@gmail.com
wrote:
What is you usage scenario ?
On 28 November 2014 at 08:59, Tejas Sheth tshet
...@shapeblue.com
| www.shapeblue.comhtp://www.shapeblue.com/ | Twitter:@cloudstackguru
https://twitter.com/#!/cloudstackguru
ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N
4HSx-apple-data-detectors://5
On 28 Nov 2014, at 08:01, Tejas Sheth tshet...@gmail.commailto:
tshet
Chandos Place, Covent Garden, London, WC2N
4HSx-apple-data-detectors://5
On 28 Nov 2014, at 08:34, Tejas Sheth tshet...@gmail.commailto:
tshet...@gmail.com wrote:
Thanks Geoff,
can you confirm that CS 4.3 is fully supported and stable with 4.3.1
systemvmtemplate? or you preffer to go with N
: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: 28 November 2014 09:19
To: users@cloudstack.apache.org
Subject: Re: Stable updated System VM template
Hi Geoff,
We have deployed Cloudstack 4.3 does cloudstack 4.3.1 available and if
it is available then does systemvmtemplate 4.3.1 works with 4.3
Tests Complete. Look for ERROR or WARNING above.
Any Idea about the reason behind above issue in cloudstack with advance
zone configuration?.
Thanks
Tejas
On Fri, Nov 28, 2014 at 4:15 PM, Tejas Sheth tshet...@gmail.com wrote:
Hi Goeff,
Thnaks, in order
run the following command in the ssvm.
/usr/local/cloud/systemvm/ssvm-check.sh
For more troubleshooting of ssvm follow the below link.
https://cwiki.apache.org/confluence/display/CLOUDSTACK/SSVM,+templates,+Secondary+storage+troubleshooting
Thanks,
Jayapal
On 27-Nov-2014, at 9:00 PM, Tejas
for
failure of the systemvm.
Along with the MS logs also check the host logs (/var/log/SMLog).
Check systemvm.iso is present in the host.
Thanks,
Jayapal
On 27-Nov-2014, at 11:49 AM, Tejas Sheth tshet...@gmail.com
wrote:
Hello Guyz,
We are facing issue starting system VM. deployment
/opt/cloud/bin/vhd-util
Thanks,
Jayapal
On 27-Nov-2014, at 4:18 PM, Tejas Sheth tshet...@gmail.com
wrote:
Hello Jayapal,
kindly find cloudstack-management log link for pastebin.com
http://pastebin.com/VAgcfN05
Thanks.
Tejas
On Thu, Nov 27, 2014 at 12:24 PM, Jayapal
/cloud/bin/vhd-util
After this hopefully next spin of ssvm will come up.
Thanks,
Jayapal
On 27-Nov-2014, at 5:10 PM, Tejas Sheth tshet...@gmail.commailto:
tshet...@gmail.com
wrote:
Hi Jayapal,
kindly find the output from above mention command. both location i have
copied vhd-util manually
Hello guyz,
We have deployed advanced zone with xenserver 6.2 sucessfully but we are
not able to register ISO or template.
The Ready parameter is showing NO and Status parameter is BLANK.
When i went to secondary storage VM and if we run ./run.sh it shows
following error.
ERROR
Hello,
We are using cloudstack 4.3 with system vm template deployed from bellow
link.
u
http://download.cloud.com/templates/4.3/systemvm64template-2014-01-14-master-xen.vhd.bz2
-h xenserver -F
I guess in above template hartbleed pach is not available.
can anyone provide the latest version
Borg technology!
Nux!
www.nux.ro
- Original Message -
From: Tejas Sheth tshet...@gmail.com
To: users@cloudstack.apache.org
Sent: Wednesday, 26 November, 2014 06:30:33
Subject: Re: security group and xenserver query
Hello,
I have made the bridge configuration, but when i
Hello,
Kindly find following screen shots for advance zone. The public traffic
icon is not working showing if we select security group.
https://www.sendspace.com/file/e0g1ok
Thanks,
Tejas
On Wed, Nov 26, 2014 at 2:00 PM, Tejas Sheth tshet...@gmail.com wrote:
Hi,
I am not able to see
configure public ips for the guest network.
-Jayapal
On 26-Nov-2014, at 12:00 PM, Tejas Sheth tshet...@gmail.com
wrote:
Hello,
I have made the bridge configuration, but when i am selecting advance
zone. it is not showing public network configuration. only guest and
management is availabel
.
Regards
Geoff Higginbottom
D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
geoff.higginbot...@shapeblue.com
-Original Message-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: 26 November 2014 09:53
To: users@cloudstack.apache.org
Subject: Re: security group
- Original Message -
From: Tejas Sheth tshet...@gmail.com
To: users@cloudstack.apache.org
Sent: Wednesday, 26 November, 2014 10:14:11
Subject: Re: security group and xenserver query
Thanks for simplification,
so it means that each account will have seprate VLAN with its own
mounted primary storage using presetup
storage. HA is not configured on xenserver.
what are the possible cause of above mentioned issue?
Thanks in advance
Tejas
On Wed, Nov 26, 2014 at 9:45 PM, Tejas Sheth tshet...@gmail.com wrote:
We are getting following error:
2014-11-26 21:43:26,763 WARN
Try configuration following parameter in global config.
- mem.overprovisioning.factor=2
-cpu.overprovisioning.factor=2
Thanks,
Tejas
On Wed, Nov 26, 2014 at 9:54 PM, Andrija Panic andrija.pa...@gmail.com
wrote:
Check your network connectivity, if all hosts are UP etc.
2014-11-26
the /var/log/SMLog in the host for more detailed logs for this
error.
Thanks,
Jayapal
On 26-Nov-2014, at 9:51 PM, Tejas Sheth tshet...@gmail.com wrote:
Hello,
ISSUE!!!
we are not using security groups but still bridge is configured. Zone is
created sucessfully but System VMs
...@citrix.com wrote:
Is the first added primary storage removed from the host ?
If it is not removed and trying to added again it will fail.
You can delete it using the xencenter or xsconsole.
Thanks,
Jayapal
On 26-Nov-2014, at 11:04 PM, Tejas Sheth tshet...@gmail.com
wrote:
Hi Jayapal
a public IP via DHCP and that's it, the customers are
isolated via security groups which is a fancy name for iptables rules.
Hope this clears it up.
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
From: Tejas Sheth tshet...@gmail.com
.
Along with the MS logs also check the host logs (/var/log/SMLog).
Check systemvm.iso is present in the host.
Thanks,
Jayapal
On 27-Nov-2014, at 11:49 AM, Tejas Sheth tshet...@gmail.com
wrote:
Hello Guyz,
We are facing issue starting system VM. deployment is in production so
really
it
explicitly.
Thanks,
Jayapal
On 25-Nov-2014, at 4:47 PM, Tejas Sheth tshet...@gmail.com
wrote:
Hello,
We are configuring advanced zone in cloudstack 4.3 in xenserver 6.2. we
want to configure security group in advance zone. do we have to do any
special configuration in xenserver 6.2
to CS it copies some files to the host itself and you don't need
to bother about them usually.
Vadim.
-Original Message-
From: Tejas Sheth [mailto:tshet...@gmail.com]
Sent: Tuesday, November 25, 2014 4:52 PM
To: users@cloudstack.apache.org
Subject: security group and xenserver
group and
xenserver as hypervisor.
Thanks
Tejas
On Tue, Nov 25, 2014 at 9:16 PM, Jayapal Reddy Uradi
jayapalreddy.ur...@citrix.com wrote:
For 6.2 you no need to install CSP. My typo mistake in last mail.
sysctl.conf is fine.
Thanks,
Jayapal
On 25-Nov-2014, at 8:45 PM, Tejas Sheth tshet
Hello,
I have a quick question which need to be resolved before we start
cloudstack deployment.
In Cloudstack 4.3 cluster how many physical hosts(xenserver 6.2) supported
?
Thanks
-Tejas
Hi Ricky,
I think that completely depends on Logical processor supported by
hypervisor. Xenserver supports 150 Logical processor per hosts.
So as far as hypervisor limit is satisfied cluster works fine.
Thanks,
Tejas
From: Ricky Keele rjke...@digitalipvoice.com
To:
Hi Lakmal,
There is a quite simple script written for cloudstack deployment by
Antone.
you can download the script from git
https://github.com/thehyperadvisor/cldstk-deploy
Thanks,
Tejas
From: Imesh Gunaratne im...@apache.org
To: users@cloudstack.apache.org
Cc: Lakmal
Hi Amir,
It is possible with vSphere 5.1, but vCenter is required for cloudstack
integration.
It would be batter to select hypervisor carefully. You can also visit
bellow link for hypervisor feature support for cloudstack
Thanks Suneel,
Its working after applying the changes.
Thanks and regards,
Tejas
From: Venkata Suneel Babu Mallela sunee...@simplifydc.com
To: cloudusersusers users@cloudstack.apache.org
Date: 10/07/2014 11:23 AM
Subject:Re: Zenoss Monitoring with Cloudstack 4.3
Try with
Hi,
I have deployed zenoss core using autodeploy script. Zenoss monitoring
dashboard looks fine but when we add cloudstack with its URL (
http://xx.xx.xx.xx:8080/client), secret key and API Key. it gives
following error.
Does any one has come up with similar issue?
CloudStack error: 505
if you can find any solution for cloudstack.
Thanks and regards,
Tejas Sheth
+919844244247
From: Adrian Lewis adr...@alsiconsulting.co.uk
To: users@cloudstack.apache.org
Date: 09/10/2014 04:29 PM
Subject:DRaaS based on ACS
Hi All,
We’re currently looking
Yes i am using the default port for mysql. and i have set the root
password also. I am able to do login using mysql client using -p
(password) only i am not able to do the same remotely (from cloudstack
server)
Thanks,
Tejas
From: ilya musayev ilya.mailing.li...@gmail.com
To:
It is giving following error with identified by clause.
ERROR 1064 (42000): You have an error in your SQL syntax; check the
manual that corresponds to your MySQL server version for the right syntax
to use near 'identified by password'' at line 1
Thanks
Tejas
From: ilya musayev
Hi Guyz,
The issue is Resolved, I have applied following command in database
server.
UPDATE mysql.user SET Grant_priv='Y', Super_priv='Y' WHERE User='root';
FLUSH PRIVILEGES;
And I have removed password from cloud-setup-database statement
(--deploy-as=root:password).
Thanks,
Tejas
Hello,
I have installed multi node management server with septate mysql
database server. I want to explore the usage server capability in
cloudstack does any one can help with configuration and usage guide.
Thanks
Tejas
Did you add ACL Ingress and Egress rules?
-Tejas
From: clement mutz c.m...@servitics.fr
To: users@cloudstack.apache.org
Date: 08/07/2014 01:16 PM
Subject:question about security group
Hi community !
I'll try to create a zone with public network. I can't ping my VMs
Hi All,
I have created a windows template with xentools installation. While
creating template i have checked Password reset option. but when i deploy
VM from template and when i select reset password icon It shows new
password but password is not being reset.
Am i missing some
Thanks Erik,
I have downloaded the template using wget but still the size of
template is 194 byte. When i extract it I can see
systemvm64template-2014-06-23-master-xen.vhd file.
What can be the reason for this behaviour?
Thanks,
Tejas
From: Erik Weber terbol...@gmail.com
To:
The VHD file contains following HTML text.
HTMLHEAD
meta http-equiv=pragma content=nocache
META HTTP-EQUIV=Expires CONTENT=-1
SCRIPT
location.href=http://10.0.2.1:8090/httpclient.html;
/SCRIPT
/HEADBODY
/BODY
/HTML
Thanks,
Tejas
From: Erik Weber terbol...@gmail.com
To:
Thanks Erik,
I have already one template stored in Zone 1 secondary storage which is
running successfully. can i copy the same and install it in Zone 2
secondary storage?
Thanks,
Tejas
From: Erik Weber terbol...@gmail.com
To: users@cloudstack.apache.org
Date: 08/05/2014 06:03 PM
Hi Matthew,
Which hypervisor you are using?
From: Matthew Midgett cst...@trickhosting.biz
To: users@cloudstack.apache.org
Date: 08/06/2014 01:31 AM
Subject:Cisco help on public interface
I need to ask my network administrator to prepare my public interfaces. On
switch
96 matches
Mail list logo