[dpdk-users] expose kni interface on VM to host

Hi all, I have successfully installed DPDK on a Linux guest VM, which is launched by VirtualBox on a Mac host. After running the kni Example Application on my VM by following DPDK kni example guide , I am able to assign an IP

Re: [dpdk-users] mlx5: packets lost between good+discard and phy counters

After further investigation, I think this may be a bug introduced in DPDK v20.11, where these "lost" packets should be counted as "rx_out_of_buffer" and "rx_missed_errors". On v20.08 both of these counters increment, but on v20.11 and v21.02 these counters always remain 0. Any workarounds for

Re: [dpdk-users] All links down with Chelsio T6 NICs

Thank you for your reply, Thomas! This is the port summary. Number of available ports: 4 Port MAC Address Name Driver Status Link 000:07:43:5D:4E:60 :05:00.4 net_cxgbe down 100 Gbps 100:07:43:5D:4E:68 :05:00.4_1 net_cxgbe down 100 Gbps 2

Re: [dpdk-users] All links down with Chelsio T6 NICs

+Cc Chelsio maintainer 09/04/2021 19:24, Danushka Menikkumbura: > Hello, > > When I run testpmd on a system with 2 two-port Chelsio T6 NICs, the link > status is down for all four ports. I use igb_uio as the kernel driver. > Below is my testpmd commandline and the startup log. > > sudo

Re: [dpdk-users] Running Pktgen with Mellanox CX5

On Fri, Apr 09, 2021 at 02:15:04PM +, Wiles, Keith wrote: > > > > On Apr 8, 2021, at 7:08 PM, Narcisa Ana Maria Vasile > > wrote: > > > > Thanks for the quick reply! Just to clarify, the libmlx4 doesn't get > > installed when installing the latest Mellanox drivers. > > Instead, the