Dear Kannel users,
I connect a Nokia E72 phone to my Fedora 7 box with a usb cable. The port is
ttyACM0. mod for the device is changed to 666 with command
chmod 666 ttyACM0
The
setup is fine to send out SMS. When there is SMS being sent out, I can
see the signal interaction in smsbox and
Do you have any suggestions here please? I am keen to resolve this today
Is your phone able to use AT+CNMI command using minicom ?
AT+CNMI?
If ERROR then your phone won't be able to forward SMS to kannel
BR
Emmanuel
2011/1/12 Helen Sang sangzhu...@yahoo.com
Dear Kannel users,
I connect a Nokia E72 phone to my Fedora 7 box with a usb cable. The port
is
Emmanuel,
Thanks for your reply.
I have tried minicom again. I confirm that this phone, Nokia E72, doesn't
support CNMI. I played with the commands for a while, it seems that the phone
do not allow AT command to access any of it's memories. Any operations,
receiving a SMS, sending SMS
Vijay,
Kannel could be used to send all kinds of OTA messages supported by the
receiver's phone, including ringtones, vcal, pictures, etc. There's actually
some examples on the contrib folder (on the source code).
Regarding the question about the folder/bookmark, it's not something related
to
I am using Standard SIM with the Huawei E220 GSM Modem.
On Wed, Jan 12, 2011 at 12:40 PM, Harbhag Singh Sohal
harbhag.so...@gmail.com wrote:
I am not able to send sms and when I checked the bearerbox.log I got the
following
2011-01-12 12:38:07 [15333] [7] DEBUG: sms_router: handling message
Is this because my SIM is blocked by the carrier because we are sending high
amount of SMS ?
can somebody please confirm it ?
On Wed, Jan 12, 2011 at 4:01 PM, Harbhag Singh Sohal
harbhag.so...@gmail.com wrote:
I am using Standard SIM with the Huawei E220 GSM Modem.
On Wed, Jan 12, 2011 at
On Wed, 2011-01-12 at 16:07, Harbhag Singh Sohal wrote:
Is this because my SIM is blocked by the carrier because we are sending high
amount of SMS ?
It could be.
can somebody please confirm it ?
The +CMS ERROR 500 means an unknown error, usually.
On Wed, Jan 12, 2011 at 4:01 PM, Harbhag
You can dial the number to check if it is temporarily blocked by carrier it
will give announcement generally and u can put the sim in mobile handset and
see if sms is ok
Sent from my BlackBerry® wireless device
-Original Message-
From: Milan P. Stanic m...@arvanta.net
Sender:
Opeator does not deactivate the msisdn for this reason, does not have the right
to do it.
Instead they might have some rules in SMSC to block sms traffic for specific
msisdn that reaches some threshold.
If you want to confirm this, send to their customer care your complaint
including
Hi all
I need French accent character support with kannel, as m not able to
decode the characters sent as it simply sends question mark signs to user.
Please guide me if it has to do with character set , n which one should
i use , plus plz do further help by mentioning other things that are
Hello all, I new to Kannel and I'm trying to set it up on this way:
1. Connect to several SMPP gateways (no problem)
2. Insert MT and MO messages on a SQL-Server Spool Database (problem!!!)
I tried SQLBOX and it works very well, but, I need to use a Stored Procedure
interface to access to
Santiago,
You'd need to modify sqlbox's queries to call stored procedures instead.
They're defined on macros on sqlbox_mssql.h
You'll probably need to tweak the code for the responses to match what your
stored procedure returns.
Hope it helps.
Alejandro
On Wed, Jan 12, 2011 at 4:37 PM,
Dear,
How can I change the log level of an smpp smsc group?
The HTTP administration command loglevel seems to only act on bearbox logging.
Do I need to modify the configuration file, stop the smsc and then restart it?
TIA.
TSHIMANGA Minkoka
VAS Manager
È +243 814443113
* + 243 815560341 ext.
log-level works for the smsc's as well (it changes _all_ log levels at
once).
If you need to change a single smsc instance, you need to change the conf
and restart it.
Regards,
Alex
On Wed, Jan 12, 2011 at 5:16 PM, Tshimanga Minkoka
tshimanga.mink...@vodacom.cd wrote:
Dear,
How can I
Hi,
You need to modify the variable log-level in the group smsc and set it to
the desired level. This you do per smcs
Check user guide:
log-level number 0..5
Minimum level of log-file events logged. 0 is for debug, 1 info,2
warning, 3 error and 4panic
From:
Hi there,
I have never used the http interface for sending sms, since I have
installed the mysql box.
From my browser Im trying to send some sms, with no Sent result, just the
Unknown request.
The log(0) says:
2011-01-12 14:21:07 [3261] [2] DEBUG: HTTP: Creating HTTPClient for
`10.27.1.226'.
I am using kannel 1.4.3. I have set up a modem as the smsc. I am able to
send smses, but not receive. There is nothing on the logs when I try
receiving smses on kannel. what could be wrong with my config?
group = core
admin-port = 13000
admin-password = foo
status-password = foo_status
you need to configure your modem to fwd messages to kannel. use cnmi
cpmmand in init string. check ug for details
On 1/12/11, Mutuku Ndeti jnmut...@gmail.com wrote:
I am using kannel 1.4.3. I have set up a modem as the smsc. I am able to
send smses, but not receive. There is nothing on the logs
Hi Rapture,
Sorry I had to specify that I needed it on the fly, without restarting kannel.
Alex have answered specifying that the http command changes all the log levels
(SMSCs included).
I will give it a try, and feedback.
Thanks to all.
TSHIMANGA Minkoka
VAS Manager
È +243 814443113
* +
You changed the sensms-url to be /sendsms, not /cgi-bin/sendsms...
Hope it helps.
--
Alex Guerrieri
On 12/01/2011, at 21:01, Daniel Camacho dcama...@promocionesacertadas.com
wrote:
Hi there,
I have never used the http interface for sending sms, since I have
installed the mysql box.
The stop-smsc and start-smsc can be performed without restarting kannel, it
will only reconnect the given smsc.
Regards,
--
Alex Guerrieri
On 13/01/2011, at 07:58, Tshimanga Minkoka tshimanga.mink...@vodacom.cd wrote:
Hi Rapture,
Sorry I had to specify that I needed it on the fly,
Dear Kannel users,
I changed to a Motorola U9 phone.
In minicom, I have this response from the phone:
AT+CNMI=?
+CNMI: (0,3),(0-2),(0),(0),(0)
So, I set the init-string to: AT+CNMI = 3,2,0,0,0
I can also use minicom to send SMS out.
My modem config file is as this:
group = modems
id =
23 matches
Mail list logo