This is what shown on the console screen...
2009-03-21 13:02:01 [0] INFO: Added logfile
`/var/log/kannel/bearerbox.log' with level `1'.
2009-03-21 13:02:01 [0] INFO:
2009-03-21 13:02:01 [0] INFO: Kannel bearerbox II version 1.2.0 starting
2009-03-21
Message -
From: Paul Darius pauldar...@gmail.com
To: Alvaro Cornejo cornejo.alv...@gmail.com
Cc: users@kannel.org
Sent: Saturday, March 21, 2009 8:05 AM
Subject: Re: Need help for kannel configuration
This is what shown on the console screen...
2009-03-21 13:02:01 [0] INFO: Added logfile
`/var
Hi all,
I need help for kannel tune-up with the following configuration :
+ OS CentOS 5.2
+ kannel 1.4.1
+ libxml 2.6.26-2.1.2.7
+ machine iPentium 4 core duo
kannel.conf :
cat /etc/kannel.conf
# Default kannel configuration file
group = core
admin-port = 13000
admin-password = admin
You don't have permissions to access the modem. If you're running kannel
under an underprivileged user, you need to make sure that your user has
permissions to read/write the modem.
Hope it helps,
Alejandro
On Fri, Mar 20, 2009 at 4:50 PM, Paul Darius pauldar...@gmail.com wrote:
Hi all,
I
Thx for the reply.
I run that bearerbox under root and from local machine.
Also, the mode of /dev/ttyUSB0 already 777
# ls -l /dev/ttyUSB0
crwxrwxrwx 1 root uucp 188, 0 Mar 20 21:38 /dev/ttyUSB0
What else the error cause ?
PD
On Fri, Mar 20, 2009 at 10:53 PM, Alejandro Guerrieri
I do not know anything about minicom...
But I try to change the device to /dev/ttyUSB1 or /dev/ttyUSB2 and the
result as follow
# /usr/local/sbin/bearerbox /etc/kannel.conf
2009-03-21 08:19:52 [0] INFO: Debug_lvl = -1, log_file = none, log_lvl = 0
2009-03-21 08:19:52 [0] WARNING: DLR: using
What modem/phone are you using ??
I've seen that problem with enfora usb modems (EDG1228) where the usb
firmware of the modem is not compatible with linux (the usb is detected
as cp2101 driver).
check this:
[18998.913582] usb 1-1: new full speed USB device using uhci_hcd and
address 3
I am using iTegno 3800 with usb port.
the dmesg added when I added the device :
usb 4-2: new full speed USB device using uhci_hcd and address 3
usb 4-2: configuration #1 chosen from 1 choice
pl2303 4-2:1.0: pl2303 converter detected
usb 4-2: pl2303 converter now attached to ttyUSB0
from
Ti you get some info with kannel, post the logs to see where the problem
is. Log should tell you wich command failed. Check your device manual
for specific command values/syntax
Alvaro
On Sat, 2009-03-21 at 09:37 +0700, Paul Darius wrote:
I am using iTegno 3800 with usb port.
the dmesg