On Fri, 6 Oct 2023, Roger Heflin wrote:
What does "lspci | grep -i sata" show in the livecd?
liveuser@localhost-live hennebry]$ lspci | grep -i sata >>sata.txt
[liveuser@localhost-live hennebry]$ cat sata.txt
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA Controller
[IDE
> Well, "we have met the enemy and he is us".
>
> I very regularly use rsync to backup my home directory to a different machine.
> So, after installing from KDE Live, logging in from a remote machine,
> I restored my home directory with the saved backup. ...
and user/group rights and ownership
What does "lspci | grep -i sata" show in the livecd?
And you don't have any bios/software raid enabled and have the disk
set to AHCI if available in the bios?
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to
Well, "we have met the enemy and he is us".
I very regularly use rsync to backup my home directory to a different machine.
So, after installing from KDE Live, logging in from a remote machine,
I restored my home directory with the saved backup. This created/over-wrote
.local
.config
.cache
On Fri, 6 Oct 2023, Roger Heflin wrote:
What kind of device/controller are those filesystems on?
They would have to be something weird for anaconda to not have the right driver.
it is not a sdhc/mmc type card is it?
'Tis an internal Seagate model ST380815AS.
80e9 bytes. 7200 rpm. SATA.
I
keep a second firefox window open, alt-tab to it run about:performance
and it will list out all of your tabs and you can X a specific tab.
Try about:performance I have to use it a lot to figure out which tab
lost its mind and is slowing everything down because it decided it
needs gb's of ram.
On
What kind of device/controller are those filesystems on?
They would have to be something weird for anaconda to not have the right driver.
it is not a sdhc/mmc type card is it?
On Fri, Oct 6, 2023 at 4:02 PM Michael Hennebry
wrote:
>
>
> On Fri, 6 Oct 2023, Roger Heflin wrote:
>
> > Typically
On Fri, 6 Oct 2023, Roger Heflin wrote:
I am surprised that alt-tab does not switch to another app for you. I
If it happens again, I'll try it.
I'd forgotten all about it.
Do not rmember the last time I used it.
have used that to switch out of full screen applications and I would
not
On Fri, 6 Oct 2023, Roger Heflin wrote:
Typically you have to go full custom and assuming home is on a VG with
free space you would then have to create a LV and define a fs on it,
and assigned it as root (/).
Similar would have to be done with /boot outside of LVM and if efi
would you also
I am surprised that alt-tab does not switch to another app for you. I
have used that to switch out of full screen applications and I would
not expect firefox/malware to have any way to make the window be able
to truly take over the screen.
In firefox about:config there are some options that
I will pay money to simplify the config and/or the mess such that it
is easier to get working and/or easier to keep working. 2 different
cards from 2 vendors is going to be difficult to get working and
difficult to keep working. If you are going to have to add/buy cards
and/or buy a 2nd KVM for
On Fri, 6 Oct 2023, Mike Wright wrote:
What would happen if you disconnected from the network just long enough to
change the settings on the browser to NOT open new pages in a tab but
instead to do it the old-fashioned way: open new pages in their own window.
You might be able to X the
>
> so you want a dual-dual-monitor setup with a KVM.
>
> Have you considered getting a single large 4k monitor/tv instead of 2
> smaller ones(assuming the smaller ones are 1080p)? That would
> simplify a lot of what you would need to buy.
Sure, but I already have the 2 monitors and the 2 PCs.
Hello,
On 06/10/2023 09:47, Patrick Dupre wrote:
I plan to install a KVM for 2 monitors.
One machine has a VGA/DVI on the motherboard, and the other one has 2 DP.
Both monitors are VGA/DVI/DP
I have to replace the VGA out by a DP.
What would be the best option:
1) Add a DP video card on the
so you want a dual-dual-monitor setup with a KVM.
Have you considered getting a single large 4k monitor/tv instead of 2
smaller ones(assuming the smaller ones are 1080p)? That would
simplify a lot of what you would need to buy.
I am running a 4k TV across 2 machines, physically it is 43" and I
I am sorry for the confusion.
I am attaching a pdf to clarify my approach.
The question is about what to set in PC1.
The VGA port cannot be used for this setup.
Option 1:
try to use the DVI of the MB and
add a graphics card with one DP port
Option 2:
add a dual port DP/DP video card, with a
> On 6 Oct 2023, at 15:57, richard emberson wrote:
>
> Back in 10/04/2023 I got "Pri Master Hard Disk SMART status BAD"
> # smartctl -a /dev/sda | more
> Western Digital VelociRaptor
> WDC WD3000GLFS-01F8U0
> SATA 2.5 3.0 Gb/s
> 1 rpm
> ...
> health test result: FAILED!
> failure
> On 6 Oct 2023, at 08:47, Patrick Dupre wrote:
>
> One machine has a VGA/DVI on the motherboard, and the other one has 2 DP.
> Both monitors are VGA/DVI/DP
Use a DVI KVM (check it allows EDID passthru).
You can passively convert DP to DVI with a cable.
Barry
On 10/6/23 07:58, Michael Hennebry wrote:
On Thu, 5 Oct 2023, Joe Zeff wrote:
On 10/05/2023 09:15 PM, Tim via users wrote:
It's a pity there isn't a hotkey for killing just the frontmost/topmost
program. ALT+F4 will close the top/front window, if they're obeying
control, but I mean instantly
On Thu, 5 Oct 2023 14:35:42 -0700
Samuel Sieb wrote:
> On 2023-10-05 12:34, stan via users wrote:
> > Inspired by the responses here that allowed me to understand what I
> > was searching for, I eventually found a program called scrcpy.
> >
> > https://github.com/Genymobile/scrcpy/
> >
> > It
On Fri, 06 Oct 2023 13:14:50 +1030
Tim wrote:
Thanks for the explanations, Tim.
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct:
Typically you have to go full custom and assuming home is on a VG with
free space you would then have to create a LV and define a fs on it,
and assigned it as root (/).
Similar would have to be done with /boot outside of LVM and if efi
would you also need a /boot/efi again outside of LVM.
No
On Fri, 6 Oct 2023, Stephen Morris wrote:
On 6/10/23 13:12, Michael Hennebry wrote:
I burned the F38 workstation installer onto a DVD.
On booting it can find my home directory on the only hard disk.
When I tell the installer to install,
it claims it cannot find a hard drive. Grrr.
The first
On Thu, 5 Oct 2023, Joe Zeff wrote:
On 10/05/2023 09:15 PM, Tim via users wrote:
It's a pity there isn't a hotkey for killing just the frontmost/topmost
program. ALT+F4 will close the top/front window, if they're obeying
control, but I mean instantly killing the topmost window despite what
it
Back in 10/04/2023 I got "Pri Master Hard Disk SMART status BAD"
# smartctl -a /dev/sda | more
Western Digital VelociRaptor
WDC WD3000GLFS-01F8U0
SATA 2.5 3.0 Gb/s
1 rpm
...
health test result: FAILED!
failure less than 24 hours SAVE ALL DATA
...
Vendor Specific SMART
ok. that makes a bit more sense. And by KVM he means just
keyboard-mouse since he has 2 monitors and does not need the video
and/or the video is separated by monitor.
I am not sure what he is trying to do given this setup. Depending on
what he is trying to do, there may be easier ways to do
On Fri, 2023-10-06 at 05:55 -0500, Roger Heflin wrote:
> I don't believe KVM allows separation by video port. I think you can
> only give a KVM the entire card. And even if KVM allowed you to give
> it a single port I think X/Wayland assumes total control of the card
> and cards ram (I could be
I don't believe KVM allows separation by video port. I think you can
only give a KVM the entire card. And even if KVM allowed you to give
it a single port I think X/Wayland assumes total control of the card
and cards ram (I could be wrong, but that would require knowing about
the 2nd instance
Technically it does, you just have to figure out what the os process
is and kill it, each tab is a separate os process.I have killed
weather channel with kill -9 many times(it is easy to find it as it
leaks ram and is the only multiple-gb firefox thread).
If you have a 2nd firefox window open
On Thu, Oct 5, 2023 at 9:01 PM Alex wrote:
>
> Hi,
>
>> You might try uninstalling mesa-va-drivers and replacing with this:
>> mesa-va-drivers-freeworld
>>
>> one of my 2 machines was ok and a 2nd one looked closer to what yours
>> looked like.
>>
>> And replacing with freeworld it now looks much
Another drawback might be that you can’t access your home server or desktop
while on the road. You can't configure port sharing or a VPN endpoint like you
can on your landline router.
> Am 06.10.2023 um 06:58 schrieb Jeffrey Walton :
>
> On Thu, Oct 5, 2023 at 11:15 AM stan via users
>
On 6/10/23 08:27, Patrick O'Callaghan wrote:
On Fri, 2023-10-06 at 08:20 +1100, Stephen Morris wrote:
On 6/10/23 07:04, Roger Heflin wrote:
You might try uninstalling mesa-va-drivers and replacing with this:
mesa-va-drivers-freeworld
one of my 2 machines was ok and a 2nd one looked closer to
On 6/10/23 13:12, Michael Hennebry wrote:
I burned the F38 workstation installer onto a DVD.
On booting it can find my home directory on the only hard disk.
When I tell the installer to install,
it claims it cannot find a hard drive. Grrr.
The first time I got the message, I just rebooted.
On
Hello,
I plan to install a KVM for 2 monitors.
One machine has a VGA/DVI on the motherboard, and the other one has 2 DP.
Both monitors are VGA/DVI/DP
I have to replace the VGA out by a DP.
What would be the best option:
1) Add a DP video card on the PCIExpress bus (and use the DVI of the
34 matches
Mail list logo
