I followed this guide to get my three node HCI cluster up and running:
https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/
The docs were a bit out of date but most things matched up.
I have configured an internal GlusterFS network on a separate subnet on
10Gbe
Hi, any suggestion on how to fix this?
Sent with [ProtonMail](https://protonmail.com) Secure Email.
‐‐‐ Original Message ‐‐‐
Il 12 agosto 2018 5:30 PM, dvotrak ha scritto:
> Ok, so what is the correct way too fix this? After change multipath
> configuration, should I restart engine or
On Wed, Aug 15, 2018 at 10:30 PM Алексей Максимов <
aleksey.i.maksi...@yandex.ru> wrote:
> Hello Nir
>
> > To confirm this theory, please share the output of:
> > Top volume:
> > dd if=/dev/6db73566-0f7f-4438-a9ef-6815075f45ea/metadata bs=512 count=1
> skip=16 iflag=direct
>
>
Eventually failed.
I am running CentOS 7.5 on the host. After re-reading documentation it
seems that my /var partition might not be large enough, as it's only 30GB,
but no warning message indicating that's an issue.
Thanks,
Douglas Duckworth, MSc, LFCS
HPC System Administrator
Scientific
Hello Nir
> To confirm this theory, please share the output of:
> Top volume:
> dd if=/dev/6db73566-0f7f-4438-a9ef-6815075f45ea/metadata bs=512 count=1
> skip=16 iflag=direct
DOMAIN=6db73566-0f7f-4438-a9ef-6815075f45ea
CTIME=1533083673
FORMAT=COW
DISKTYPE=DATA
LEGALITY=LEGAL
SIZE=62914560
Hi,
Wild guess, but it could be selinux. Try permissive mode or check ausearch?
Greg
On Wed, Aug 15, 2018 at 10:25 AM Douglas Duckworth
wrote:
>
> https://www.ovirt.org/documentation/how-to/troubleshooting/troubleshooting-nfs-storage-issues/
>
> Try the script outlined in section
Ok the ansible engine-deploy now seems to be stuck and same step:
[ INFO ] TASK [Force host-deploy in offline mode]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Add host]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Wait for the host to be up]
On the hypervisor in syslog I see:
Aug 15 14:09:26
On Wed, Aug 15, 2018 at 6:14 PM Алексей Максимов <
aleksey.i.maksi...@yandex.ru> wrote:
> Hello Nir
>
> Thanks for the answer.
> The output of the commands is below.
>
>
>
>
I posted about this a few months ago on Reddit when it happened the first time,
and I have now repeated it on two more separate installations. I have a simple
oVirt 4.2 hosted-engine setup, two hosts, with a qnap NAS as the shared NFS
storage. I copied an ova file (exported from vmware) to the
Same VDSM error
This is the state shown by service after the failed state messages:
● vdsmd.service - Virtual Desktop Server Manager
Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor
preset: enabled)
Active: active (running) since Wed 2018-08-15 13:07:48 EDT; 4min 10s
I get:
Cannot import VM. Invalid time zone for given OS type.
Attribute: vm.vmStatic
I found an old thread here:
https://lists.ovirt.org/pipermail/users/2014-January/019363.html
But it states the issue was resolved in 3.3.1.
Running oVirt 4.2.5.1
The VM has the proper time zone set and
Ok
I was now able to get to the step:
Engine replied: DB Up!Welcome to Health Status!
By removing a bad entry from /etc/hosts for ovirt-engine.pbech which
pointed to an IP on the local virtualization network.
Though now when trying to connect to engine during deploy:
[ ERROR ] The VDSM host
Hello Nir
Thanks for the answer.
The output of the commands is below.
*
> 1. Please share the output of this command on one of the hosts:
> lvs -o
https://www.ovirt.org/documentation/how-to/troubleshooting/troubleshooting-nfs-storage-issues/
Try the script outlined in section "nfs-check-program."
Thanks,
Douglas Duckworth, MSc, LFCS
HPC System Administrator
Scientific Computing Unit
Weill Cornell Medicine
E: d...@med.cornell.edu
O:
Can you attach the vdsm log?
On Wed, Aug 15, 2018 at 5:16 PM Inquirer Guy wrote:
> Adding to the below issue, my NODE01 can see the NFS share i created from
> the ENGINE01 which I don't know how it got through because when I add a
> storage domain from the ovirt engine I still get the error
>
>
Adding to the below issue, my NODE01 can see the NFS share i created from
the ENGINE01 which I don't know how it got through because when I add a
storage domain from the ovirt engine I still get the error
On 14 August 2018 at 10:22, Inquirer Guy wrote:
> Hi Ovirt,
>
> I successfully
Hi community! Does the ansible module "ovirt_snapshots" support download/upload of snapshots?According to the https://bugzilla.redhat.com/show_bug.cgi?id=1405805 support of this functionality is already implemented in the ovirt API. How to use ovirt-ansible to implement the following backup
On Tue, Aug 14, 2018 at 6:03 PM Алексей Максимов <
aleksey.i.maksi...@yandex.ru> wrote:
> Hello, Nir
>
> Log in attachment.
>
In the log we can see both createVolume and deleteVolume fail for this disk
uuid:
cdf1751b-64d3-42bc-b9ef-b0174c7ea068
1. Please share the output of this command on one
Hi,
This behavior is by design.
For the iSCSI multipathing sub tab to appear, the data center should have
an iSCSI domain attached.
Thanks,
Elad Ben Aharon
RHV QE
On Mon, Aug 13, 2018 at 5:54 PM, wrote:
> Hello.
>
> We have 6 servers in our cluster, which use 2 storage through iSCSI
>
Hello,
I tried to update a ovirt-ng-node from 4.2.4 via the engine and it
failed, I also tried using "yum update ovirt-node-ng-image-update".
What is the correct way to update a node and how do I delete old layers
Thanks,
Paul S.
The output from "nodectl info" is
layers:
4.2.6.3 appears to be working just fine, thanks to all.
On 14 August 2018 at 08:49, Eli Mesika wrote:
> Got the env from mburman , checking
>
> On Tue, Aug 14, 2018 at 10:13 AM, Martin Perina
> wrote:
>
>> Adding Eli
>>
>> On Tue, Aug 14, 2018 at 9:03 AM, Yedidyah Bar David
>> wrote:
>>
21 matches
Mail list logo
