What is the output of 'gluster volume info engine' & 'gluster volume status
engine' (where engine is the volume name) ?
Best Regards,
Strahil Nikolov
В четвъртък, 5 ноември 2020 г., 23:37:35 Гринуич+2, marcel d'heureuse
написа:
No, the edge was running and we have crashed the
No, the edge was running and we have crashed the engine with reboot hard or
setup a server with the same IP address to see what happens.
all tests will be solved well but the .shred folder of the gluster will be
bigger and bigger.
the engine it selve has round 5 GB but the .shred has 60 up
Well,
cleanup for me means to just mount the volume and delete any data there.
Yet, this means that you are willing to loose the data there and you should do
it only if you plan to reuse the volume (for example for redeploying the
engine).
Let's summarize . Your engine failed, so you tried to
On Thu, Nov 5, 2020, 18:20 Strahil Nikolov via Users
wrote:
> This is just a guess , but you might be able to install fence_xvm on all
> Virtualized Hosts .
>
Did not know fence_xvm. Interesting to check it.
>
> Best Regards,
> Strahil Nikolov
>
>
>
>
>
>
> В четвъртък, 5 ноември 2020 г.,
On Thu, Nov 5, 2020, 16:00 jb wrote:
> Hello,
>
> I would like to build a hyperconverged gluster with hosted engine in a
> virtual environment, on Fedora 33 with KVM.
>
> The setup is for testing purposes, specially for test upgrades before
> running them on the real physical Servers. But I want
Moin,
Thats sounds interessing. How you can cleanup a gluster volume of the
hosted engine.
We had an engine running with round 200 VMs on a big systems and every 3
days we los 1 % of the engine storage. the devices has 150 GB and is a
replicated over 6 bricks.
as this systems has reached
Am 05.11.20 um 19:19 schrieb Strahil Nikolov:
You need to enable HA for the VM.
Yes this I know and I had this on. When I set the host in maintenance
mode, the VM was moving to another host, but not when I kill the host.
About the XVM , I think that you first need to install it on all
Create a vdo device with 'emulate52' and use that for your LVM's PV.
Best Regards,
Strahil Nikolov
В четвъртък, 5 ноември 2020 г., 18:24:32 Гринуич+2, Rob Verduijn
написа:
Hello,
After a serious struggle I finally managed to get ovirt-hosted engine with the
hyperconverged setup to
Yes I know, is just a guest... I wanted to test what is happen with a
VM, when I kill it's host. After that, I have not seen that the VM is
moving to another host.
So I thought maybe ovirt needs the power management for that.
I have read about fence_xvm, but I don't know how to configure
Hello,
After a serious struggle I finally managed to get ovirt-hosted engine with
the hyperconverged setup to work.
However I did not manage to get the ssd cache option for my slow sata
drives to work.
The installation script complained about mismatching block sizes.
Is there a way to make the
This is just a guess , but you might be able to install fence_xvm on all
Virtualized Hosts .
Best Regards,
Strahil Nikolov
В четвъртък, 5 ноември 2020 г., 16:00:40 Гринуич+2, jb
написа:
Hello,
I would like to build a hyperconverged gluster with hosted engine in a
virtual
The engine volume has to be cleaned up .
Here is mine:
[root@ovirt1 ~]# df -h /rhev/data-center/mnt/glusterSD/gluster1\:_engine/
Filesystem Size Used Avail Use% Mounted on
gluster1:/engine 100G 19G 82G 19%
/rhev/data-center/mnt/glusterSD/gluster1:_engine
It seems that
oVirt 4.4.3 Eighth Release Candidate is now available for testing
The oVirt Project is pleased to announce the availability of oVirt 4.4.3
Eighth Release Candidate for testing, as of November 5th, 2020.
This update is the third in a series of stabilization updates to the 4.4
series.
How to
thanks very much
--原始邮件--
发件人："Liran Rotenberg "https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
Hi,
The engine will monitor that host. Once it's reachable and we can get
information from it the status will change accordingly.
Please check out the HostMonitoring class.
On Thu, Nov 5, 2020 at 11:57 AM lifuqi...@sunyainfo.com <
lifuqi...@sunyainfo.com> wrote:
>
> Hi,
> I checkout
On Wed, Nov 4, 2020 at 7:23 PM wrote:
> Hello,
> I'm trying to get an Affinity Group setup that will gracefully remove VMs
> from a Host. Below is what I've tried but the VMs will not migrate off.
>
> oVirt 4.3
> Priority: 1
> VM Affinity Rule: Disabled
> Host Affinity Rule: Negative ( Soft )
>
Hello,
sorry there comes many questions today from me!
I plan a new cluster setup, and for that I bought ASUS Barebone with
Intel Xeon E-2246G CPUs. Sadly I pay not enough attention to the system
requirements from oVirt and now I say that theCoffee Lake-ER
architecture is not in the
Dear Mr.Strahil Nikolov,
Thank you once again!
"cleanup the share and extend it to 65G ? "- You mean the disk where the
gluster storage volume gets mounted in the target server or may I know clearly
where I have to clean the space? Also if possible let em know how to increase
the disk space?
Hello,
I would like to build a hyperconverged gluster with hosted engine in a
virtual environment, on Fedora 33 with KVM.
The setup is for testing purposes, specially for test upgrades before
running them on the real physical Servers. But I want to have the setup
as close as possible to the
Dear Mr.Strahil Nikolov,
Thank you once again!
"cleanup the share and extend it to 65G ? "- You mean in target server (where
the ovirt gets installed)? if so, the target server is in production side (but
now its in testing side to test the ovirt deployment) so this needs to be
cleaned up?
I think the minimum is 60G and it seems that your deployment has failed, so can
you cleanup the share and extend it to 65G ?
Best Regards,
Strahil Nikolov
В четвъртък, 5 ноември 2020 г., 11:17:48 Гринуич+2, hjadavall...@ukaachen.de
написа:
Dear Mr.Strahil Nikolov,
Thanks for yoor
You mean the disk physically resides on a different storage domain, but
engine sees it on another?
Which version did this happen on?
Do you have the logs from this failure?
On Tue, Nov 3, 2020 at 5:51 PM wrote:
>
>
> I used it but it didn't work The disk is still in locked status
>
> when I run
On Thu, Nov 5, 2020 at 12:51 PM Andrei Verovski
wrote:
> H,
>
> Select query wen succesfull, unfortunately (vm_guid copied from VM
> profile, rest copied from [1]):
>
> engine=# update vm_dynamic set
> run_on_vds='82f92946-9130-4dbd-8663-1ac0b50668a1' where
>
H,
Select query wen succesfull, unfortunately (vm_guid copied from VM profile,
rest copied from [1]):
engine=# update vm_dynamic set
run_on_vds='82f92946-9130-4dbd-8663-1ac0b50668a1' where
vm_guid='d168bbeb-0532-44e4-93da-fdfcd7cc7f20';
ERROR: insert or update on table "vm_dynamic" violates
Hello everybody,
is it a problem to enable the BaseOS on a oVirt Node? I ask, because I
would like to install nano ... I could just disable it again, after
installation, but what can happen when it stays enabled?
Jonathan
___
Users mailing list
Hi,
I checkout ovirt-engine's code with branch 4.2; When execute Host's
Management --> Active command, ovirt engine just set vds's status to
"Unassigned" but how the vds's status changed to "UP" in ovirt-engine? The
code in ActiveVdsCommand.executeCommand() as follows:
protected void
Do I understand this correct, is OVirt installing the SSL certificate for the
domains or do I have to do it manually?
If I have to install my own SSL for the domain and stored on my servers, can I
use Let's Encrypt?
Yours Sincerely,
Henni
From: i...@worldhostess.com
Sent:
Dear Mr.Strahil Nikolov,
Thanks for yoor quick response! It shows like 39G is used and 12G is still
available. Below is the data shared to your knowledge
when I mount it manually.
DateisystemGröße Benutzt Verf. Verw% Eingehängt auf
192.168.0.85:/engine 50G 39G 12G
Dear Mr.Strahil Nikolov,
Thanks for yoor quick response! It shows like 39G was sued and 12G is still
available. Below is the data shared to your knowledge
when I mount it manually.
Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf
192.168.0.85:/engine 50G 39G 12G 78% /mnt
Dear Mr.Strahil Nikolov,
Thanks for yoor quick response! It shows like . Below is the data shared to
your knowledge when I mount it manually.
Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf
192.168.0.85:/engine 50G 39G 12G 78% /mnt
gluster volume : engine
30 matches
Mail list logo
