On Sun, Feb 18, 2018 at 4:25 PM, Michal Skrivanek <
michal.skriva...@redhat.com> wrote:
>
>
> On 18 Feb 2018, at 13:09, Alex K wrote:
>
> I see that the latest guest tools for 4.1 are dated 27-04-2017.
>
> http://resources.ovirt.org/pub/ovirt-4.1/iso
?
Thanx,
Alex
On Sun, Feb 18, 2018 at 1:53 PM, Alex K wrote:
> Seems that this is due to:
>
> https://bugzilla.redhat.com/show_bug.cgi?id=1446147
>
> I will check If i can find newer guest agents.
>
> On Sun, Feb 18, 2018 at 1:46 PM, Alex K wrote:
>
>> Hi all,
>>
Seems that this is due to:
https://bugzilla.redhat.com/show_bug.cgi?id=1446147
I will check If i can find newer guest agents.
On Sun, Feb 18, 2018 at 1:46 PM, Alex K wrote:
> Hi all,
>
> I am running a 3 node ovirt 4.1 selft hosted setup.
> I have consistently observed that wi
Hi all,
I am running a 3 node ovirt 4.1 selft hosted setup.
I have consistently observed that windows 10 VMs with SPICE console fail to
live migrate. Other VMs (windows server 2016) do migrate normally.
VDSM log indicates:
internal error: unable to execute QEMU command 'migrate': qxl: guest bug:
Hi all,
I had put a specif email alert during the deploy and then I wanted to
change it.
I did the following:
At one of the hosts ra:
hosted-engine --set-shared-config destination-emails ale...@domain.com
--type=broker
systemctl restart ovirt-ha-broker.service
I had to do the above since chang
For a proper upgrade there are specific steps that you follow for each host
and the engine.
I usually upgrade the hosts first then the engine. If you have spare
resources so as to put hosts at maintenance then the upgrade should be
seamless. Also i think you need to go strp by step: 3.5 -> 3.6 ->
Did you try partprobe and pvscan before pvcreate?
On Feb 16, 2018 01:23, "Matt Simonsen" wrote:
> Hello all,
>
> This may not be oVirt specific (but it may be) so thank you in advance for
> any assistance.
>
> I have a system installed with oVirt Node Next 4.1.9 that was installed to
> /dev/sda
Yes you can.
On Feb 15, 2018 23:09, "Mark Steele" wrote:
> I have with no joy.
>
> Question: Can I restart the HostedEngine with running VM's without
> negatively impacting them?
>
>
> ***
> *Mark Steele*
> CIO / VP Technical Operations | TelVue Corporation
> TelVue - We Share Your Vision
> 1600
Thank you Nir for the below.
I am putting some comments inline in blue.
On Tue, Feb 13, 2018 at 7:33 PM, Nir Soffer wrote:
> On Wed, Jan 24, 2018 at 3:19 PM Alex K wrote:
>
>> Hi all,
>>
>> I have a cluster with 3 nodes, using ovirt 4.1 in a self hosted setup on
>
Thanx!
On Tue, Feb 13, 2018 at 12:54 PM, Sandro Bonazzola
wrote:
>
>
> 2018-02-13 11:42 GMT+01:00 Alex K :
>
>> Hi all,
>>
>> Is this version considered production ready?
>>
>
> Yes, 4.2.1 is considered production ready
>
>
>
>
>>
Hi all,
Is this version considered production ready?
Thanx,
Alex
On Mon, Feb 12, 2018 at 7:14 PM, Sandro Bonazzola
wrote:
>
>
> 2018-02-12 17:43 GMT+01:00 Gianluca Cecchi :
>
>> On Mon, Feb 12, 2018 at 4:22 PM, Lev Veyde wrote:
>>
>>> The oVirt Project is pleased to announce the availability
Hi,
did you select "Deploy" when adding the new host?
See attached.
[image: Inline image 2]
Thanx,
Alex
On Fri, Feb 9, 2018 at 9:53 AM, Reznikov Alexei
wrote:
> Hi all!
>
> After upgrade from ovirt 4.0 to 4.1, a have trouble add to next
> HostedEngine host to my cluster via webui... host add
Hi all,
In case you need any further logs let me know.
Thanx for the time.
Alex
On Thu, Feb 8, 2018 at 9:41 AM, Alex K wrote:
> Hi Shani,
>
> Didn't notice that.
> I am attaching later vdsm logs.
>
> Thanx,
> Alex
>
> On Wed, Feb 7, 2018 at 5:31 PM, Shani Levii
Hi,
I have seen hosts rendered unresponsive when gateway is lost.
I will be able to provide more info once I prepare an environment and test
this further.
Thanx,
Alex
On Tue, Feb 6, 2018 at 10:40 AM, Yaniv Kaul wrote:
>
>
> On Feb 5, 2018 2:21 PM, "Alex K" wrote:
>
&g
replaced by vdsm-client[1]
>
> [1] - https://www.ovirt.org/develop/developer-guide/vdsm/vdsm-client/
>
> On Tue, Feb 6, 2018 at 10:17 AM, Alex K wrote:
>
>> Hi all,
>>
>> I have a stuck snapshot removal from a VM which is blocking the VM to
>> start.
> Thanks,
> Edy.
>
>
> On Mon, Feb 5, 2018 at 2:19 PM, Alex K wrote:
>
>> Hi all,
>>
>> I have a 3 nodes ovirt 4.1 cluster, self hosted on top of glusterfs. The
>> cluster is used to host several VMs.
>> I have observed that when gateway is lost
Hi all,
I have a stuck snapshot removal from a VM which is blocking the VM to
start.
In ovirt 4.1 I was able to cancel the stuck task by running within SPM
host:
vdsClient -s 0 getAllTasksStatuses
vdsClient -s 0 stopTask
Is there a similar way to do at ovirt 4.2?
Thanx,
Alex
__
Hi all,
I have a 3 nodes ovirt 4.1 cluster, self hosted on top of glusterfs. The
cluster is used to host several VMs.
I have observed that when gateway is lost (say the gateway device is down)
the ovirt cluster goes down.
It seems a bit extreme behavior especially when one does not care if the
ho
Ok. I will reproduce and collect logs.
Thanx,
Alex
On Jan 29, 2018 20:21, "Mahdi Adnan" wrote:
I have Windows VMs, both client and server.
if you provide the engine.log file we might have a look at it.
--
Respectfully
*Mahdi A. Mahdi*
--
*From:* Ale
with it so far.
> have you checked engine log file ?
>
>
> --
>
> Respectfully
> *Mahdi A. Mahdi*
>
> --
> *From:* users-boun...@ovirt.org on behalf of
> Alex K
> *Sent:* Wednesday, January 24, 2018 4:18 PM
> *To:* users
> *Subj
Hi all,
I have a cluster with 3 nodes, using ovirt 4.1 in a self hosted setup on
top glusterfs.
On some VMs (especially one Windows server 2016 64bit with 500 GB of disk).
Guest agents are installed at VMs. i almost always observe that during the
backup of the VM the VM is rendered unresponsive (d
gt; we havent backported the fix yet.
>
> Best regards
>
> Martin Sivak
>
> On Fri, Jan 19, 2018 at 1:01 PM, Alex K wrote:
> > Hi All,
> >
> > I have a 3 server ovirt 4.1 selft hosted setup with gluster replica 3.
> >
> > I see that suddenly one
Hi All,
I have a 3 server ovirt 4.1 selft hosted setup with gluster replica 3.
I see that suddenly one of the hosts reported as unresponsive and at same
time the /var/log/messages logged:
ovirt-ha-broker ovirt_hosted_engine_ha.broker.listener.ConnectionHandler
ERROR Error handling request, data:
Thanx,
Installed and seems to be working nicely.
Alex
On Wed, Jan 17, 2018 at 8:36 AM, Yedidyah Bar David wrote:
> On Tue, Jan 16, 2018 at 11:33 PM, Alex K wrote:
> > Hi all,
> >
> > Is the ISO at
> > http://plain.resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-
&g
Hi all,
Is the ISO at
http://plain.resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetup/4.2-1.el7.centos/
the latest guest tools? I'm interested for Windows 2016 and Windows 10.
Thanx,
Alex
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.or
ote:
> On Mon, Jan 1, 2018 at 8:43 PM, Alex K wrote:
>
>> Hi all and Happy New Year!
>>
>> I have a ovirt 4.1.3.5 cluster (running with 3 nodes and shared gluster
>> storage).
>> I have randomly observed that some Windows 10 64bit VMs are reported from
>&
Hi all and Happy New Year!
I have a ovirt 4.1.3.5 cluster (running with 3 nodes and shared gluster
storage).
I have randomly observed that some Windows 10 64bit VMs are reported from
engine dashboard with 100%CPU while when connecting within the VM the CPU
utilization is normal.
Sometimes, when re
test email.
for some reason I do not receive messages from this mailing list.
Alex
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Filed *Bug 1507214* <https://bugzilla.redhat.com/show_bug.cgi?id=1507214>
for this issue
Alex
On Wed, Oct 18, 2017 at 3:36 PM, Nir Soffer wrote:
> On Wed, Oct 18, 2017 at 2:31 PM Alex K wrote:
>
>> For anyone that might be wondering, this errors disappeared after
>> re
work, you can just scp
> the file to /mnt//images/11--11
> 11-…/
>
> Hope this helps !!!
>
> Thanks
> kasturi
>
>
> On Thu, Oct 19, 2017 at 1:23 PM, Alex K wrote:
>
>> The only workaround that seems to work for my case is the following:
>
domain.
Alex
On Thu, Oct 19, 2017 at 12:09 AM, Alex K wrote:
> If this is the case then I will try to set the gluster network to be at
> the network that engine can reach prior to adding the ISO domain. I would
> prefere not to add an additional interface to engine as then I will need to
&
performance of storage network.
Alex
On Oct 18, 2017 11:36 PM, "Elad Ben Aharon" wrote:
> Hi,
>
> The storage where 'ISO' storage domain resides has to be reachable for the
> engine server. Please check network connectivity between the two.
>
> On Wed,
Hi all,
I have setup a self hosted setup with 3 servers with several volumes in
replica 3.
These gluster volumes are set on a separate network (on separate NICs on
same servers), dedicated for gluster traffic. The engine does not have any
NIC in this network.
The ISO storage domain is also on top
b order by start_time desc;
select DeleteJob('');
Alex
On Wed, Oct 18, 2017 at 1:07 PM, Alex K wrote:
> Hi all,
>
> While attempting to enable the VM leases for a specific VM I am receiving
> the following error within the engine.log:
>
> 2017-10-18 07:56:03
Hi all,
While attempting to enable the VM leases for a specific VM I am receiving
the following error within the engine.log:
2017-10-18 07:56:03,186Z ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-6-thread-18) [37c74b60] EVENT_ID:
HOT_PLUG_LEAS
downloading the vv file before
> the password expires.
>
> On 5 October 2017 at 22:58, Alex K wrote:
> > Any idea how this can be addressed?
> >
> >
> > On Sep 19, 2017 23:07, "Alex K" wrote:
> >
> > Hi all,
> >
> > I am trying t
Any idea how this can be addressed?
On Sep 19, 2017 23:07, "Alex K" wrote:
Hi all,
I am trying to get the VM console of a VM through SSH socks proxy.
This is a scenario I will frequently face, as the ovirt cluster will be
available only though a remote SSH tunnel.
I am trying sever
Hi all,
I am trying to get the VM console of a VM through SSH socks proxy.
This is a scenario I will frequently face, as the ovirt cluster will be
available only though a remote SSH tunnel.
I am trying several console options without success.
With SPICE or VNC I get issue with virt-viewer saying
On Tue, Sep 19, 2017 at 2:26 PM, Arik Hadas wrote:
>
> On Tue, Sep 19, 2017 at 12:44 PM, Alex K wrote:
>
>> A second test did not yield the same result.
>> This time the VMs were restarted to another host and when the lost host
>> recovered no VMs were running on i
, 2017 at 11:41 AM, Alex K wrote:
>
>> Hi again,
>>
>> I performed a different test by isolating one host (say host A) through
>> removing all its network interfaces (thus power management through IPMI was
>> also not avaialble).
>> The VMs (with VM lease
ide at some point to shutdown
the paused VMs and continue with the VMs that are already running at other
hosts.
Is this behavior normal?
Thanx,
Alex
On Tue, Sep 19, 2017 at 10:18 AM, Alex K wrote:
> Hi All,
>
> Just completed the tests and it works great.
> VM leases is just what I need
Hi All,
Just completed the tests and it works great.
VM leases is just what I needed.
Thanx,
Alex
On Tue, Sep 19, 2017 at 10:16 AM, Yaniv Kaul wrote:
>
>
> On Tue, Sep 19, 2017 at 1:00 AM, Alex K wrote:
>
>> Enabling VM leases could be an answer to this. Will test tomorr
Enabling VM leases could be an answer to this. Will test tomorrow.
Thanx,
Alex
On Sep 18, 2017 7:50 PM, "Alex K" wrote:
Hi All,
I have the following issue with the HA behavior of oVirt 4.1 and need to
check with you if there is any work around from your experience.
I have 3 server
Hi All,
I have the following issue with the HA behavior of oVirt 4.1 and need to
check with you if there is any work around from your experience.
I have 3 servers (A, B, C) with hosted engine in self hosted setup on top
gluster with replica 3 + 1 arbiter. All good except one point:
The hosts hav
Hi All,
When I get console of a Windows VM (Windows 10 x64bit) I am requested to
authenticate and then the user is disconnected (though not logged out as
the apps of the user are still open).
I have tested this with QXL/SPICE and VGA/VNC console mode.
Is there any mode at oVirt console to get con
ize.
>
> -Ravi
>
>
> On 09/18/2017 11:40 AM, Alex K wrote:
>
> The heal status is showing that no pending files need healing (also shown
> at GUI).
> When checking the bricks on the file system I see that what is different
> between the server is the .shard folder of
size at some point from 4 MB to 64MB.
Could this be the cause?
Thanx,
Alex
On Mon, Sep 18, 2017 at 8:14 AM, Ravishankar N
wrote:
>
> On 09/18/2017 10:08 AM, Alex K wrote:
>
> Hi Ravishankar,
>
> I am not referring to the arbiter volume(which is showing 0% usage). I am
> ref
usage of data
on the data volumes, except the "vms" volume used for storing vms.
Thanx,
Alex
On Sep 18, 2017 07:00, "Ravishankar N" wrote:
>
>
> On 09/17/2017 08:41 PM, Alex K wrote:
>
> Hi all,
>
> I have replica 3 with 1 arbiter.
> When checking th
Thanx, I can confirm that this way i may transfer VMs, but I was thinking a
more dirty and perhaps portable way.
Say I want to get to a external disk just one VM from DC A and copy/import
it on DC B that has no access to the export domain of DC A.
I've seen also articles converting the VM disk to
Hi all,
I have replica 3 with 1 arbiter.
When checking the gluster volume bricks they are reported as using
different space, as per attached. How come they use different space? One
would expect to use exactly the same space since they are replica.
Thanx,
Alex
_
mmm, perhaps one more reason to go to simple replica 3...
Thanx,
Alex
On Fri, Sep 15, 2017 at 3:30 PM, Sahina Bose wrote:
>
>
> On Fri, Sep 15, 2017 at 5:48 PM, Alex K wrote:
>
>> In the replica 3 + 1 arbiter does this mean that if I loose the two nodes
>> having the
In the replica 3 + 1 arbiter does this mean that if I loose the two nodes
having the normal volumes and left only with the node that has the arbiter
volume, I loose all data?
Thanx,
Alex
On Fri, Sep 15, 2017 at 11:25 AM, Kasturi Narra wrote:
> Hi ,
>
>yes, you are right. Since arbiter brick
201 - 252 of 252 matches
Mail list logo