On 2024-04-15 13:32, Ankit Sharma wrote:
Now i want to upgrade storage but want to use host for storage so how
can i use and add Local storage and use it for VM's?
It has always been possible to use local storage in oVirt, you just have
to export it somehow, e.g. by using NFS.
Just a few
On 2023-05-12 15:34 Volenbovskyi, Konstantin wrote:
what are 'source' and 'target' ovirt engine versions?
I was attempting to perform a direct upgrade from 4.3.x to 4.5.4
(nightly).
It was said to work properly and I've done this before already,
so I wasn't expecting trouble. :)
Indeed,
Hi,
I was trying to restore a oVirt Engine Backup into a new Hosted Engine
appliance (as part of an upgrade), but this failed with the following
error:
--== PKI CONFIGURATION ==--
[WARNING] Failed to read or parse
'/etc/pki/ovirt-engine/keys/engine.p12'
Perhaps it was changed since last
On 2023-01-13 22:47, Frank Wall wrote:
I've made some progress, the Hosted Engine Storage Domain was
successfully imported and was successfully activated on all hosts.
Now oVirt tries to import the Hosted Engine VM, but fails with a
NullPointerException:
OK, got it working by reinstalling
Hi,
On 2023-01-10 14:53, Frank Wall wrote:
Validation of action 'AddExistingFileStorageDomain' failed for user
SYSTEM. Reasons:
VAR__TYPE__STORAGE__DOMAIN,VAR__ACTION__ADD,ERROR_CANNOT_ADD_EXISTING_STORAGE_DOMAIN_CONNECTION_DATA_ILLEGAL
I've made some progress, the Hosted Engine Storage
Hi Didi,
hi Michal,
could you probably provide some advice on this issue?
Any hint would be greatly appreciated.
Thanks
- Frank
On 2023-01-07 15:28, Frank Wall wrote:
Hi,
the following error message is periodically logged to engine.log when
oVirt tries to import the Hosted Engine Storage
Hi,
the following error message is periodically logged to engine.log when
oVirt tries to import the Hosted Engine Storage Domain (NFS):
Validation of action 'AddExistingFileStorageDomain' failed for user
SYSTEM. Reasons:
On 2022-12-13 12:29, Murilo Morais wrote:
Unfortunately, I haven't found anything like this.
At least this type of event didn't happen again, but I just can't find
anything in the logs that justifies these reboots, I've read everything
line by line, if anything was recorded there it passed my
On 2022-11-21 19:56, Alex McWhirter wrote:
I have some manpower im willing to throw at oVirt, but i somewhat need
to know if what the community wants and what we want are in line.
That's actually great news! I appreciate that you are reaching out to
the community to get early feedback.
4.
Hi Didi,
thanks for keeping us updated. However, I'm concerned...
Ultimately, the future of oVirt lies in the hands of the community. If
you, as a community member, use and like oVirt, and want to see it
thrive, now is the best time to help with this!
I don't want to be rude, but this sounds
On 2022-06-03 21:34, Pavel Mlčoch wrote:
Know anybody which CPU type can be used for Athlon5350 or how to solve
this error?
You can check the supported CPU type by running the following command:
virsh -r capabilities | grep model
Regards
- Frank
To answer my own post...
On Mon, Mar 25, 2019 at 02:45:18PM +0100, Frank Wall wrote:
> I've been using oVirt for years and have just discovered a rather strange
> issue that causes EXTREME high iowait when using a NFSv3 storage.
>
> 3145728000 bytes (3.1 GB) copied, 141.649 s, 22.2 MB
Hi,
I've been using oVirt for years and have just discovered a rather strange
issue that causes EXTREME high iowait when using a NFSv3 storage.
Here's a quick test on a CentOS 7.6 VM running on any oVirt 4.2.x node:
(5 oVirt nodes, all showing the same results)
# CentOS VM
$ dd if=/dev/zero
Hi Simone,
thanks for your quick reply, much appreciated!
On Tue, Nov 28, 2017 at 10:04:10AM +0100, Simone Tiraboschi wrote:
> what happened to you is exactly https://bugzilla.redhat.com/1317125 which
> has been closed as wontfix.
I've seen this bugzilla issue, but TBH I was a bit baffled. Back
Hi,
when running "hosted-engine --deploy" on a fresh CentOS 7.4 with pre-built
network configuration (and ovirtmgmt bridge), the following error occurs:
2017-11-27 19:08:12 DEBUG otopi.context context._executeMethod:142 method
exception
Traceback (most recent call last):
File
On Mon, Jun 26, 2017 at 10:51:52AM +0200, InterNetX - Juergen Gotteswinter
wrote:
> > 2. Should I migrate from XenServer to oVirt? This is biased, I know, but
> > I would like to hear opinions. The folks with @redhat.com email
> > addresses will know how to advocate in favor of oVirt.
>
> in
On Fri, Jul 22, 2016 at 03:58:56PM -0500, Blaster wrote:
> I did try a clean install. Both an upgrade and a fresh install cause a blue
> screen. How do I pin point the blue screen?
In my case I could solve this issue by changing the number of (virtual)
CPUs to only 1 for the Windows 10 VM. The
Hi Michal,
On Tue, Feb 09, 2016 at 12:04:44PM +0100, Michal Skrivanek wrote:
> what do you mean ???forces
> you should be able to switch to cirrus (which forces vnc) or even use just
> the vnc on qxl
on the affected VMs the following error occurs when trying to start them:
Error while
Hi,
with oVirt 3.5 (and prior) it was possible to set the default console like this:
# engine-config -s ClientModeVncDefault=NoVnc
Unfortunately, starting with oVirt 3.6 this doesn't seem to work anymore.
The root cause seems to be that I am no longer allowed to use the previous
Video Type for
On Tue, Jan 05, 2016 at 05:37:08PM +0200, Yedidyah Bar David wrote:
> Perhaps to aid debugging you can try this, but _do_not_ press Enter:
>
> yum --disableplugin=versionlock update ovirt-engine
>
> Kill it (or reply 'no').
>
> What does it output?
Basically the same dependency error. I've
On Sun, Jan 03, 2016 at 03:18:40PM +0100, Frank Wall wrote:
> [ INFO ] Checking for product updates...
> [ ERROR ] Yum: [u'ovirt-engine-3.6.1.3-1.el6.noarch requires slf4j >= 1.7.0',
> u'vdsm-jsonrpc-java-1.1.5-1.el6.noarch requires slf4j >= 1.6.1']
> [ INFO ] Yum: Performi
Hi,
I've just tried to upgrade my ovirt-engine 3.5.5 which is still running on EL6,
but it failed due to a dependency error regarding slf4j:
# engine-setup
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
Configuration files:
Hi Alan,
On Thu, Dec 24, 2015 at 10:37:17AM -0800, Alan Murrell wrote:
> Are dummy interfaces still supported in 3.6?
I'm running ovirt 3.6 AiO and dummy interfaces are working just fine.
Instead of modifying oVirt's python source files, I'd recommend you
rename the dummy interface(s) to match
Hi Phil,
On Mon, Nov 02, 2015 at 04:38:14PM +, Phil Daws wrote:
> have attempted to downgrade noVNC (novnc-0.4-7.el6.noarch) but it still down
> not work.
I was hit by the same issue. If I remember correctly I had to do the following
to resurrect noVNC (on EL7):
wget
Hi,
On Sat, Oct 03, 2015 at 11:58:09AM +0330, S.Mohammad Emami Razavi wrote:
> How can i check oVirt support for HP servers particularly Gen9?
> Does anybody test oVirt with new generations of HP server?
> Sincerely.
if you plan to deploy oVirt on either Red Hat Enterprise Linux (RHEL) or on
On Mon, Mar 02, 2015 at 11:25:38AM +0100, Frank Wall wrote:
On Sun, Mar 01, 2015 at 02:26:12AM -0500, Yedidyah Bar David wrote:
You wrote 'shutdown -h now on the hosts'. What happens if you shutdown
just one of them and then wait a bit? Does it get started too?
Are you certain
On Sun, Mar 01, 2015 at 02:26:12AM -0500, Yedidyah Bar David wrote:
You wrote 'shutdown -h now on the hosts'. What happens if you shutdown
just one of them and then wait a bit? Does it get started too?
Are you certain that 'shutdown -h now' worked on these hosts before the
setup - that it's
Hi Ryan,
On Thu, Nov 06, 2014 at 09:10:32AM -0700, Groten, Ryan wrote:
I went through this a couple months ago. Migrated my hosted-engine from
one NFS host to another. Here are the steps that I documented from the
experience.
just wanted to let you know that my migration went flawlessly,
On Wed, Nov 05, 2014 at 08:11:39AM +0100, Jiri Moskovcak wrote:
On 11/04/2014 03:52 PM, Alastair Neil wrote:
So is this the workflow?
set the hosted-engine maintenance to global
shutdown the engine VM
make changes via virsh or editing vm.conf
sync changes to the other
Hi Sven,
On Thu, Oct 30, 2014 at 02:35:54PM +0100, Sven Kieske wrote:
I just wanted to ask if there are some plans to also
support other automation tools like salt, chef, cfengine
or others, because puppet is imho not a good tool for
large environments performance wise.
actually Foreman has
On Thu, Oct 09, 2014 at 05:08:56PM -0300, Amador Pahim wrote:
On 10/09/2014 04:31 PM, Frank Wall wrote:
while testing oVirt 3.5 RC I've came across this cluster setting:
Optimization - KSM control - [X] Enable KSM
[...]
But KSM is still running and consuming a lot CPU.
It will have
Hi Doron,
On Sun, Oct 19, 2014 at 11:42:47AM -0400, Doron Fediuck wrote:
KSM is controlled by MoM, which gets its policy from the engine through
VDSM. MoM will call ksm directly as needed when needed. If you choose
to disable it the policy needs to get updated.
Can you please check your mom
Hi,
while testing oVirt 3.5 RC I've came across this cluster setting:
Optimization - KSM control - [X] Enable KSM
I guess it's related to Kernel Same-page Merging.
Since KSM is a bad idea in my case (really slow CPUs), I've disabled
this Cluster setting, expecting oVirt to disable KSM on each
Hi Markus,
On Thu, Oct 09, 2014 at 07:43:45PM +, Markus Stockhausen wrote:
Have a look at redhat bugzilla #1114226. It should give an
idea what is happening behind the scenes.
well, even with reduced CPU load the impact of KSM is still big in my case.
Though, I'm interested to see the
On Mon, Sep 29, 2014 at 08:43:10AM -0400, Greg Sheremeta wrote:
Switch over to https://copr.fedoraproject.org/coprs/patternfly/patternfly1/
and run 'yum update patternfly1'
and you'll be all set.
Just for the records, the latest update to patternfly1-1.0.5-1.el6.noarch
broke the oVirt Engine
On Wed, Oct 08, 2014 at 11:39:44PM +0200, Frank Wall wrote:
Just for the records, the latest update to patternfly1-1.0.5-1.el6.noarch
broke the oVirt Engine Admin GUI for me.
Oh, it's late. I was talking about the update to patternfly1-1.1.0-1.el6.noarch.
Regards
- Frank
Hi,
today I've noticed that one of my VMs was paused. I took a look
at the engine.log and found only this:
2014-09-09 04:00:09,017 INFO
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-46) VM XXX 8ad326be-5103-498a-a11d-0ea1eee4bbf4
moved from Up --
On Tue, Sep 09, 2014 at 03:09:02PM +0100, Dafna Ron wrote:
qemu would pause a vm when doing extend on the vm disk and this would
result in INFO messages on vm's pause.
looks like this is what you are seeing.
For the records, I'm using thin provisioned disks here.
Do you mean an internal
On Tue, Jul 22, 2014 at 11:21:46AM -0700, pixelfairy wrote:
can novnc be the default? i like native vnc and spice clients too, but
for new users this would be much easier. esp for mac (and mobile
device) users who cant get remoteviewer.app working.
NoVNC has some limitations. You may set it as
On Thu, Mar 06, 2014 at 09:20:25AM -0500, Eli Mesika wrote:
I had to test the upgrade from 3.3.4 to 3.4
I had installed and tested for sanity 3.3.4 but failed to upgrade it to 3.4
on CentOS
Opened https://bugzilla.redhat.com/show_bug.cgi?id=1073487
FWIW, I've updated an All-in-one host from
Hi Andrew,
On Mon, Feb 17, 2014 at 07:57:33PM +1100, Andrew Lau wrote:
Is anyone using Foreman with oVirt 3.4?
Post upgrade, I appear to be having some issues with Foreman reporting
undefined method `text' for nil:NilClass
this issue was reported to Foreman:
Hi,
I've retired a host that was part of a hosted-engine setup. How do I
remove this host from my hosted-engine HA setup?
I have retired host01 and would like to remove it completely:
[root@host03 ~]# hosted-engine --vm-status
--== Host 1 status ==--
Status up-to-date : False
Hi Doron,
On Tue, Feb 11, 2014 at 11:49:30AM -0500, Doron Fediuck wrote:
This is still in the works, but the right way to retire a host
is first to put it into local maintenance (there's CLI for it
and hopefully by 3.4 GA we will do it when you use the UI to put
a host into maintenance).
Hi Christopher,
On Wed, Jan 29, 2014 at 11:33:21AM +, Dresel Christopher wrote:
What is the procedure for uploading isos to local storage domains?
Are there other options than using the engine-iso-uploader?
you can manually copy/rsync your files directly to the locally
mounted directory
On Tue, Jan 28, 2014 at 09:47:11AM +, Dan Kenigsberg wrote:
Frank, can you tell how did it reach your ovirt-3.4 installation? Did
you pull a nightly build of Vdsm ?
Indeed, I'm currently testing vdsm nightly along with oVirt-Engine 3.4 Beta:
ovirt-engine:
On Sun, Jan 26, 2014 at 04:12:05PM -0500, Yedidyah Bar David wrote:
Please report about any results/issues. If it fails, you can try first, after
removing from the engine,
# yum remove libvirt vdsm
# rm -rf /etc/vdsm /etc/libvirt
(or, of course, just reinstall if you do not care).
I
Hi,
still testing 3.4 and I'm unable to save a node's
network configuration in webadmin:
Error while executing action Setup Networks: Unexpected exception
My configuration on the ovirt node:
- manually added net2 bridge, attached to eth1
My configuration in ovirt-engine webadmin:
- added new
Hi Itamar,
On Sat, Jan 25, 2014 at 11:48:00PM +0200, Itamar Heim wrote:
2.) hosted-engine VM device are not visible in GUI
The disk and network devices are not visible in the
admin portal. Thus I'm unable to change anything.
Is this intended? If so, how am I supposed to make changes?
Hi Itamar,
On Sun, Jan 26, 2014 at 06:21:03PM +0200, Itamar Heim wrote:
OK, I'll give this a try. Just to be sure: If I move the
hosted-engine VM to a different storage domain from the
command line, will this storage domain still be visible
from the webadmin? Or will it be hidden, because
Hi Itamar,
On Sun, Jan 26, 2014 at 07:13:35PM +0200, Itamar Heim wrote:
hosted engine supports running on *multiple* nodes, providing out of the
box HA between them.
the setup should ask you if this is the second host and take care of all
the right things to copy.
thanks for the pointer.
On Sun, Jan 26, 2014 at 10:40:18PM +0200, Itamar Heim wrote:
thanks for the pointer. The documentation at [1] describes the
required steps to setup a second node. Unfortunately it failed
for me because my second node was added to the cluster before [2].
why would both your hosts have the
On Sun, Jan 26, 2014 at 03:54:34PM -0500, Yedidyah Bar David wrote:
Indeed. Might it be possible to not just move to maintenance but remove
it from the engine? Then you can try again deploy as a second host.
I'll give it a spin. The host is scheduled for reinstallation tomorrow.
Well, this
Hi,
finally I've got the new hosted-engine feature running on
RHEL6 using oVirt 3.4 BETA/nightly. I've come across a few
issues and wanted to clarify if this is the desired
behaviour:
1.) hosted-engine storage domain not visible in GUI
The NFS-Storage I've used to install the hosted-engine
is
Hi,
I'm currently trying to setup a hosted-engine on a RHEL6 host
with nightly repository (because 3.4 BETA didn't work either):
[root@host ~]# hosted-engine --deploy
[ INFO ] Stage: Initializing
Continuing will configure this host for serving as hypervisor and
create a VM where you
Hi Sandro,
On Thu, Jan 23, 2014 at 02:28:29PM +0100, Sandro Bonazzola wrote:
Do you have the same issue you've with nightly?
on BETA the hosted-engine setup fails (earlier) with another issue that seems
to be
fixed in NIGHTLY:
2014-01-23 13:50:58 DEBUG otopi.plugins.otopi.services.rhel
On Thu, Jan 23, 2014 at 09:13:14AM -0500, Brad House wrote:
Yep, I get the _same_ exact issue. Please see my e-mail chain from
yesterday with the subject line:
oVirt 3.4.0 beta - Hosted Engine Setup -- issues
Thanks for the pointer, I guess I missed that :-( As discussed on
IRC the issue is
On Thu, Jan 16, 2014 at 12:26:37PM +0500, Nauman Abbas wrote:
For some reason, the password I put during installation is not working.
I've tried the following combinations
No reason to use trial and error here. There's always the excellent
RHEV REST API Guide to the rescue:
Hi Roy,
On 2013-12-10 8:24, Roy Golan wrote:
can you run this so we would know if the script ever ran on your env?
psql engine postgres -c select * from schema_version where version
='03030660';
engine=# select * from schema_version where version ='03030660';
-[ RECORD 1
On 2013-12-10 14:29, Michal Skrivanek wrote:
So it did run. It was supposed to change the id. Is it possible
you so ehow overwrote it manually or anything like that?
No. It is a fresh install from september and I tried hard
to follow oVirt's guidelines ;-)
I did some manual deletions in
Hi,
I'm experiencing a strange UI bug in the Amdin Portal. The
Virtual Machines tab is unusable in serval ways:
- when selecting a VM, all buttons are greyed-out, except New VM
- you cannot power on, power off, open console or edit a VM
- when selecting a VM, the VM-specific tabs do not appear
Hi Tomas,
Am 2013-12-09 10:47, schrieb Tomas Jelinek:
could you please attach the frontend logs from FF if there
are any exceptions?
not much, but this is what I got:
http://pastebin.com/5p3PbSRG
Thanks
- Frank
___
Users mailing list
Hi Tomas,
On 2013-12-09 11:12, Tomas Jelinek wrote:
Just to make sure to avoid unnecessary compilation: this logs
are from 3.3.2 BETA1, right?
yes, it's 3.3.2 BETA1 as of yesterday:
ovirt-engine-3.3.2-0.1.beta1.fc19.noarch
ovirt-engine-backend-3.3.2-0.1.beta1.fc19.noarch
Hi Tomas,
On 2013-12-09 14:22, Tomas Jelinek wrote:
2: spiceSupportMatrix.get(osId) returned null. [...]
I would guess this is the issue. To verify this could you please paste
here the content of all .../osinfo.conf.d/*.properties and also the
result of
select os, vm_name from vm_static DB
Hi Martin,
On 2013-11-04 11:12, Martin Sivak wrote:
we do not currently have anything in the engine that would allow you
to do this. If you create an oVirt RFE bug for it it would make it
easier for us to add the feature and track the progress.
good advice, here we go:
On 2013-11-04 18:06, Bob Doolittle wrote:
However, my ISO_DOMAIN remains unattached. If I select it, select its
Data Center tab, and click on Attach, it times out.
Try putting the oVirt node in maintenance mode, wait,
and activate it again. Every once in a while this helped
me solve strange
On 2013-11-04 18:54, Bob Doolittle wrote:
If there's any diagnostic info anybody would like me to
acquire first, please speak up asap.
It's always a good idea to keep a copy of /var/log/vdsm/vdsm.log
from oVirt node and /var/log/ovirt-engine/engine.log from
oVirt engine.
Regards
- Frank
Hi,
recently I've noticed that ksmd is using quite a lot CPU on
my oVirt node. While I have plenty RAM, my CPU is way slow.
Thus ksmd is eating up the most limited ressource here.
Is it supported to use custom settings for ksmd? I've noticed
that it is handled by MoM:
Hi Moti,
On 17.10.2013 15:08, Moti Asayag wrote:
Could you try disabling the filter, restart the vms and re-run the test
?
1. On the ovirt-engine run: engine-config -s
EnableMACAntiSpoofingFilterRules=false --cver=3.3
(if you're using ovirt-engine 3.2, make sure to specify it in the
--cver=
Hi Yedidyah,
On 17.09.2013 09:32, Yedidyah Bar David wrote:
What is required to enable guest-to-guest multicast communication
on an oVirt node?
Are they on the same virtual network/bridge?
Did you check iptables? You can add a rule to log such things and
see if it was iptables that blocked it
Hi Moti,
On 17.09.2013 15:41, Moti Asayag wrote:
I've tested a multicast traffic between VMs which worked fine to me.
The test made between two VMs running on different hosts, connected
to the same switch.
would you please provide some details about how you tested the
multicast traffic
On 17.09.2013 15:41, Moti Asayag wrote:
I've tested a multicast traffic between VMs which worked fine to me.
The test made between two VMs running on different hosts, connected
to the same switch.
OK, I found a secure way to test multicast communication:
(see
Hi Malini,
On 14.10.2013 19:06, Malini Rao wrote:
Here is a proposal for updating the ovirt look and feel to
give it a fresh and modern look - http://www.ovirt.org/Ovirt_LAF.
Your feedback and input is invited.
I think your proposal looks way better than the current
oVirt interface and I
Hi Yair,
On 15.09.2013 21:19, Yair Zaslavsky wrote:
I verified that commit c54353b11fb9ac2cb59cbc3e04b58e9114cbecba solved
this issue as well.
I can confirm that the issue is solved. Thank you!
ovirt-engine-3.3.0-4.fc19.noarch
ovirt-engine-backend-3.3.0-4.fc19.noarch
Hi Andrew,
On 06.09.2013 03:42, Andrew Lau wrote:
Just for reference how'd you empty the async_tasks?
on my oVirt engine I use the following steps to empty async_tasks:
aio:~# su -l postgres
-bash-4.2$ psql
psql (9.2.4)
postgres=# \c engine
engine=# select task_id from async_tasks;
Hi René,
On 01.09.2013 19:55, René Koch wrote:
I sometimes have (had) the same issues with all-in-one-setups, so I
don't use local storage in all-in-one-setup anymore.
thanks for the hint, I'll definitely give this a try if the problem
persists. As of yet I found that completely disabling
Hi,
setting up a new installation of 3.3 RC2 fails:
- installed Fedora 19
- setup ovirt repo, enable beta repo
- install all-in-one rpms
- run engine-setup
[ INFO ] Stage: Setup validation
--== CONFIGURATION PREVIEW ==--
Database name : engine
On 02.09.2013 20:03, Alon Bar-Lev wrote:
Yes[1], you probably need newer sdk.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1002749
Thanks for the pointer to BZ. I've cherry-picked a newer version from
nightly repo
(ovirt-engine-sdk-python-3.3.0.5-1.20130828.gitdbe6e62.fc19.noarch) and
On 01.09.2013 01:28, Frank Wall wrote:
OK, for some reason it got stuck trying to start iscsid and
multipathd. I was able to solve the issues with these services and
now the real error message is visible:
Did some more fiddling... I removed my /etc/multipath.conf and started
with the new file
On 26.08.2013 09:36, Antoni Segura Puimedon wrote:
Note that you can create dummies with any name you want with
ip link add drummy type dummy
So you could potentially create your own dummy_250, for example.
This is quirky :-( The usual way to add dummy interfaces would be to
create
Hi,
my all-in-one host is stuck in unresponsive state, no matter what I try.
Found this error in my engine.log:
2013-08-31 23:53:59,325 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
(DefaultQuartzScheduler_Worker-54) Command GetCapabilitiesVDS execution
On 01.09.2013 00:00, Frank Wall wrote:
2013-08-31 23:53:59,325 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
(DefaultQuartzScheduler_Worker-54) Command GetCapabilitiesVDS
execution failed. Exception: VDSNetworkException:
java.net.ConnectException: Connection refused
On 01.09.2013 00:56, Frank Wall wrote:
Sep 01 00:39:19 aio.example.com systemd-vdsmd[1587]: Starting iscsid...
Sep 01 00:40:48 aio.example.com systemd[1]: vdsmd.service operation
timed out. Terminating.
OK, for some reason it got stuck trying to start iscsid and
multipathd. I was able
On 26.08.2013 23:40, Frank Wall wrote:
Every time I reboot ovirt-engine the VMs will disappear. No matter
what I do before rebooting ovirt-engine - set storage to maintenance,
set host to maintenance - it's always the same.
On IRC #ovirt I was asked to have a look at the async_tasks table
Hi Lior,
Am 16.05.2013 16:12, schrieb Lior Vernia:
Search for a variable called fake_nics, it should exist for 3.2. By
default it is empty, but you may define a pattern for fake NIC names
to
be passed to the engine (in your case probably dummy*). Restart the
vdsm daemon and everything should
Hi René,
Am 13.05.2013 09:56, schrieb René Koch (ovido):
When using multiple logical networks on 1 physical nic you
will need most likely VLAN tagging, as all vm networks are
configured as a bridge in oVirt.
unfortunately, using VLAN tagging is not an option for me,
because I'm not the
On Mon, Apr 29, 2013 at 04:44:22PM +0200, Frank Wall wrote:
2013-04-29 16:38:33,744 INFO
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-9) Received a cdrom Device without an address
when processing VM 658ca53d-12cf-4b03-973d-a0d2cdf5315f devices
On Thu, Jan 03, 2013 at 01:05:00PM +0100, Frank Wall wrote:
cdroms
cdrom href=/api/vms/VM-ID/cdroms/----
id=----
vm href=/api/vms/VM-ID id=VM-ID/
file id=FreeBSD-8.3-RELEASE-amd64-disc1.iso/
/cdrom
Hi,
how can I access libvirt/virsh on oVirt node? What are the credentials
for accessing libvirt/virsh on the command line of a oVirt node?
virsh # list
Please enter your authentication name:
Please enter your password:
error: Failed to reconnect to the hypervisor
error: no valid connection
On Thu, Feb 07, 2013 at 09:36:42AM -0500, Mike Burns wrote:
You can execute virsh using the -r or --readonly options. You can't
change anything that way, obviously, but you should be able to read all
the information from libvirt. All changes need to be initiated through
ovirt-engine and then
On Thu, Feb 07, 2013 at 03:15:57PM +0100, Frank Wall wrote:
Any idea how to debug this further and get a bugfix/working solution?
Using virsh and the dumpxml command on the oVirt node I was able
to find the reason for the cd-rom boot problems: the qemu/libvirt
configuration differs. Have a look
Hi Itamar,
On Sun, Jan 13, 2013 at 01:05:20AM +0200, Itamar Heim wrote:
actually, changing a config requires engine restart
thanks for the hint, sounds logical to me. Don't know why I haven't
tried this before...
I restarted my oVirt engine, powered up the VM again and now the
locale of the
Hi Yeela,
On Tue, Jan 08, 2013 at 12:39:08PM -0500, Yeela Kaplan wrote:
Can you tell if the vdsm version installed on your host includes this patch?
(you can check under /usr/share/vdsm/clientIF.py).
well, I'm not sure if this patch is included in my version, but according to
the output of
On Wed, Jan 09, 2013 at 05:54:22PM +0100, Frank Wall wrote:
I've attached the full logs. It contains all log entries from activating
the ovirt node until trying to start the VM (both engine+vdsm).
The vdsm.log was missing/empty, so please find the required logs attached.
Thanks
- Frank
On Thu, Jan 03, 2013 at 10:52:33AM +, Alexandre Santos wrote:
you can change the vnc keyboard layout via the config tool
(VncKeyboardLayout option) globally.
still missing as a per vm option (though you can easily do this via a
hook if you need it per vm)
Wow, that was quick, thanks for
On Thu, Jan 03, 2013 at 11:11:41AM +, Alexandre Santos wrote:
I can't remeber well and I don't have here a ovirt installation to
test it but I'm quite sure that it was immediate.
I guess it has to do with the key you've chosen: please try de_DE
Actually, this was the first one I've tried,
Hi,
I'm using the REST API to change the boot device and attach CD-ROM images.
At least I try to... Currently I'm using the following calls to achieve this:
Task: attach cdrom
Path: https://ovirt-engine.example.com/vms/%%%VM-ID%%%/cdroms
Method: POST
Data: cdromfile id='%%%FILE-ID%%%'//cdrom
On Thu, Jan 03, 2013 at 03:50:31PM +0100, Michal Skrivanek wrote:
regarding the Admin portal way - did you configure the order
there or just look at it but it was originally configured via REST?
It was originally configured via REST. I used the Admin Portal
only to verify my configuration. As
Hi,
I was searching for a Perl Client for the oVirt REST API, but I couldn't
find one, so I hacked up one myself. It's called Net::oVirt::Lite and
it's entirely based on Net::Twitter::Lite, so credits go to it's author
Marc Mims for this nice module.
Net::oVirt::Lite uses most of the XML
Hi,
I've setup a test instance of ovirt like this...
- setup ovirt engine on Fedora 16 using yum
(ovirt-engine-3.0.0_0001-1.6.fc16.x86_64)
- setup ovirt node ovirt-node1 using the ISO image
ovirt-node-iso-2.3.0-1.0.fc16.iso
- created a new datacenter with NFS storage (datacenter2)
- created a
99 matches
Mail list logo