:19 PM Giorgio Biacchi wrote:
Hi,
I filed a bug about this last year...
https://bugzilla.redhat.com/show_bug.cgi?id=1948599
We've dome some tests with vProtect after the leatest Ovirt release
4.5.2.4-1.el8 but we still have problems with snapshots removal and
disks left in locked or illegal
Hi,
I filed a bug about this last year...
https://bugzilla.redhat.com/show_bug.cgi?id=1948599
We've dome some tests with vProtect after the leatest Ovirt release
4.5.2.4-1.el8 but we still have problems with snapshots removal and
disks left in locked or illegal state.
To bring back a disk
It seems that having SELinux in permissive mode is the cause of the
problem. I ended up opening a bugzilla but it was set to private because
I shared a lot of logs with the RedHat team. Here's a quote from the
last comment:
"We still do not fully understand the issue - specifically, why it
Hi,
I have a fresh Ovirt installation (4.4.10.7-1.el8 engine and oVirt Node
4.4.10) on a Dell VRTX chassis. There are 3 blades, two of them are
identical hardware (PowerEdge M630) and the third is a little newer
(PowerEdge M640). The third has different CPUs, more RAM, and slower
NICs. I also
Hi all,
I've got this minor issue a couple of times so far after updating Ovirt
node hosts from the UI.
The update is done corrctly but after the final reboot I have to login
via ssh and manually fix the issue with these commands:
[root@host01 ~]# semodule -i
Hi folks,
today I got a problem with vdsm and selinux after updating a host:
[root@host04 ~]# nodectl check
Status: WARN
Bootloader ... OK
Layer boot entries ... OK
Valid boot entries ... OK
Mount points ... OK
Separate /var ... OK
Discard is used ... OK
Basic storage ... OK
Il 3/10/21 3:56 PM, penguin pages ha scritto:
Fresh install of minimal CentOS8
Then deploy:
- EPEL
- Add ovirt repo https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm
Install all nodes:
- cockpit-ovirt-dashboard
- gluster-ansible-roles
- vdsm-gluster
- ovirt-host
I'm going to take a backup ad reinstall my VMs..
Regards
On 10/9/20 11:47 AM, Giorgio Biacchi wrote:
> Hi,
> due to a bug in our Ovirt integrated backup system now we have some VMs
> with snapshots in illegal state.
>
> It seems that there's an inconsistency between the db and th
Hi,
due to a bug in our Ovirt integrated backup system now we have some VMs
with snapshots in illegal state.
It seems that there's an inconsistency between the db and the real
status of images on disk.
Let me show an example:
engine=# select
at:
/etc/yum.repos.d in this case /etc/yum.repos.d/ovirt-4.3.repo
this should resolve what you are encountering.
On Wed, May 13, 2020 at 2:18 PM Giorgio Biacchi <mailto:gior...@di.unimi.it>> wrote:
Hi Lev,
I just used the iso you provided to reinstall the same host and now I
see
us know if it resolved the issue for you,
Thanks in advance,
On Tue, May 12, 2020 at 6:57 PM Giorgio Biacchi <mailto:gior...@di.unimi.it>> wrote:
Il 12/05/2020 17:07, Dominik Holler ha scritto:
>
>
> On Tue, May 12, 2020 at 4:25 PM Giorgio Biacchi
mailto:
Il 12/05/2020 17:07, Dominik Holler ha scritto:
On Tue, May 12, 2020 at 4:25 PM Giorgio Biacchi <mailto:gior...@di.unimi.it>> wrote:
On 5/12/20 12:28 PM, Dominik Holler wrote:
>
>
> On Tue, May 12, 2020 at 8:49 AM Giorgio Biacchi
mailto:g
On 5/12/20 12:28 PM, Dominik Holler wrote:
>
>
> On Tue, May 12, 2020 at 8:49 AM Giorgio Biacchi <mailto:gior...@di.unimi.it>> wrote:
>
> On 5/11/20 5:53 PM, Dominik Holler wrote:
> >
> >
> > On Mon, May 11, 2020 at 12:31 PM Giorgi
On 2/20/19 7:47 AM, Yedidyah Bar David wrote:
> On Tue, Feb 19, 2019 at 3:18 PM Giorgio Biacchi wrote:
>>
>> Hi list,
>> during our datacenter lifetime many things changed. We moved the engine
>> twice on different hosts with, of course, different FQDNs, and ma
Hi list,
during our datacenter lifetime many things changed. We moved the engine
twice on different hosts with, of course, different FQDNs, and many
other changes. Now we are stuck with an error when we try to upload an
image to a data domain. The error is somehow bound to a failure to
validate
e last
comment in this issue is specifying
https://github.com/oVirt/ovirt-web-ui/issues/460
Regards
Carl
On Fri, Jan 26, 2018 at 6:43 AM, Giorgio Biacchi <gior...@di.unimi.it
<mailto:gior...@di.unimi.it>> wrote:
It seems it's a bug. There's already another thread here with this s
It seems it's a bug. There's already another thread here with this subject:
Ovirt 4.2 Bug with Permissons on the Vm Portal?
I've enabled ovirt 4.2 pre-release repo but the problem is still present in
version 4.2.1.3-1.el7.centos
Somewhere i read that will be fixed in 4.2.2, I'm waiting...
On 01/12/2018 05:53 PM, Michal Skrivanek wrote:
On 12 Jan 2018, at 12:27, Giorgio Biacchi <gior...@di.unimi.it
<mailto:gior...@di.unimi.it>> wrote:
It's the same for me also.
Ovirt is connected to FreeIPA this time, so it seems not to be bound to a
specific AAA engine extens
It's the same for me also.
Ovirt is connected to FreeIPA this time, so it seems not to be bound to a
specific AAA engine extension.
Do we have to submit a new bug on bugzilla??
Regards
On 01/11/2018 02:04 PM, Latchezar Filtchev wrote:
Hi Guys,
The same here. Upgrade 4.1.8 to 4.2. oVirt
On 01/11/2018 11:44 AM, Kapetanakis Giannis wrote:
On 10/01/18 22:11, Wesley Stewart wrote:
Marcelo,
I would greatly appreciate seeing a script! It would be an excellent chance
for me to learn a bit about using ovirt from the command line as well!
I'm using something like this with
On 12/21/2017 11:24 AM, Sandro Bonazzola wrote:
2017-12-21 11:03 GMT+01:00 Giorgio Biacchi <gior...@di.unimi.it
<mailto:gior...@di.unimi.it>>:
Hi,
I have additional info on the problem. I run
/usr/share/ovirt-engine/setup/dbutils/fkvalidator.sh and the pro
:sbona...@redhat.com>> wrote:
2017-12-20 11:58 GMT+01:00 Giorgio Biacchi <gior...@di.unimi.it
<mailto:gior...@di.unimi.it>>:
Hello list,
I was about to upgrade from 4.1.8.2-1.el7.centos to 4.2.0 but
engine-setup fails. Here's the relevant output:
Hello list,
I was about to upgrade from 4.1.8.2-1.el7.centos to 4.2.0 but engine-setup
fails. Here's the relevant output:
[ ERROR ] Failed to execute stage 'Setup validation': Failed checking Engine
database: an exception occurred while validating the Engine database, please
check the logs
Hi,
I'm taking over Giulio because he's not at work now. I'm starting to understand
what's happening because we have not that users (and many others) in the users
tab in the admin portal.
We have heavily modified the paradigm of ovirt, VM are bound to thin clients and
not to users, this
Hi,
you cant bridge infiniband. You have to set the network as "no VM network" so it
will not be bridged.
I have a similar setup where Infiniband is used for data domain mount and vm
migrations and to have it working in connected mode with a MTU of 65520 you also
need a couple of vdsm hooks
On 07/21/2016 01:40 PM, Giorgio Biacchi wrote:
> Hi list,
> starting from here
> (http://lists.ovirt.org/pipermail/devel/2016-January/012073.html) and
> adjusting
> broken links now I'm able to pxe boot CentOS 7 + kernel arguments:
>
> LABEL node_4
> MENU LABEL Ovirt No
Hi list,
starting from here
(http://lists.ovirt.org/pipermail/devel/2016-January/012073.html) and adjusting
broken links now I'm able to pxe boot CentOS 7 + kernel arguments:
LABEL node_4
MENU LABEL Ovirt Node 4.0
KERNEL centos7/x86_64/vmlinuz
APPEND initrd=centos7/x86_64/initrd.img
t;
> On Mon, Jul 4, 2016 at 5:10 PM, Giorgio Biacchi <gior...@di.unimi.it
> <mailto:gior...@di.unimi.it>> wrote:
>
> As I said, Infiniband is not ethernet so it cannot be L2 bridged. This is
> normal
> and I understand why it can't be done. I'd like to know i
t für Astrophysik Potsdam (AIP)
> An der Sternwarte 16, 14482 Potsdam, Germany
>
> ***********
>
> On Mon, Jul 4, 2016 at 2:58 PM, Yevgeny Zaspitsky <yzasp...@redhat.com
> <mailto:yzasp...@redhat.com&
hooks"? Could you provide the source code of those?
>
> Regards,
> Yevgeny
>
> On Mon, Jul 4, 2016 at 1:43 PM, Giorgio Biacchi <gior...@di.unimi.it
> <mailto:gior...@di.unimi.it>> wrote:
>
> Hi list,
> I'm trying a test installation of the new Ovi
Hi list,
I'm trying a test installation of the new Ovirt Node Image and engine before
upgrading my 3.6 installation.
In my current environment every hypervisor access the NFS shared data domain via
infiniband. With a couple of vdsm hooks I was able to set the infiniband link in
connected mode and
31 matches
Mail list logo
