Il 23/01/2014 09:18, Ramesh ha scritto:
On 01/23/2014 12:32 PM, Sandro Bonazzola wrote:
Il 23/01/2014 07:45, Ramesh Nachimuthu ha scritto:
Hi,
After adding the node to engine, it goes to non operational state with
the error Host 10.70.43.160 is compatible with versions (3.0,3.1,3.2,3.3)
On 01/23/2014 01:48 PM, Ramesh wrote:
On 01/23/2014 12:32 PM, Sandro Bonazzola wrote:
Il 23/01/2014 07:45, Ramesh Nachimuthu ha scritto:
Hi,
After adding the node to engine, it goes to non operational state with the error
Host 10.70.43.160 is compatible with versions (3.0,3.1,3.2,3.3)
Jon, Can you please file a bug?
1. iso and export domain not being available should not cause the data
center to become non responsive.
2. it seems to be a cache issue in upgrade...
Thanks,
Dafna
On 01/23/2014 12:48 AM, Jon Archer wrote:
I rebooted the server (probably could have restarted
/top posting/
Guys, please make sure to report the issues in this pad:
http://etherpad.ovirt.org/p/3.4-testday-1
and possible work-arounds. This will help everyone else who hits
the same issues.
Thanks.
- Original Message -
From: Ramesh rnach...@redhat.com
To: Sandro Bonazzola
On Thu, Jan 23, 2014 at 06:50:59AM +, Karli Sjöberg wrote:
One comment to your wiki page: in order to better intergrate with our
recent source-routing support (mostly useful for display network),
please set GATEWAY only in ifcfg-ovirtmgmt, and remember to set
DEFROUTE=no in any
Am Mittwoch, den 22.01.2014, 14:07 +0100 schrieb Sandro Bonazzola:
Latest RPMs
repository to be enabled for testing the release are listed in the
release notes page [2].
Hey,
the following oVirt Node ISO (based on CentOS 6.5 and oVirt 3.4
components) can be used for the Test Day:
I wanted to install two hosts one on f19 and the second on el6. I
created additional cluster for el6.
Host installation for el6 worked well and it joined the cluster
without any issues. Whereas host in f19was successfully deployed
but it failed to join the cluster due to:
Host fedora is
Il 23/01/2014 10:49, Piotr Kliczewski ha scritto:
I wanted to install two hosts one on f19 and the second on el6. I
created additional cluster for el6.
Host installation for el6 worked well and it joined the cluster
without any issues. Whereas host in f19was successfully deployed
but it
On Thu, 2014-01-23 at 09:34 +, Dan Kenigsberg wrote:
On Thu, Jan 23, 2014 at 06:50:59AM +, Karli Sjöberg wrote:
One comment to your wiki page: in order to better intergrate with our
recent source-routing support (mostly useful for display network),
please set GATEWAY only
- Original Message -
From: Federico Sayd fs...@uncu.edu.ar
To: users@ovirt.org
Sent: Wednesday, January 22, 2014 2:22:01 AM
Subject: [Users] Centos 6.5 and bonding: A slave interface is not properly
configured
Hello:
I am having problems with bonding
I have installed
Hi list,
I'm taking a look at engine-managed-domains as part of the oVirt 3.4 Test Day,
and was wondering what component I should use to report bugs on it.
The closest available component seems to be ovirt-engine-installer, as this is
a setup flow in some sense, but it doesn't really feel
I assume when you're creating VMs you connect them to the ovirtmgmt network?
If so, when the VM generates a DHCP request it goes out to the same physical
network that the ovirtmgmt device is on. Meaning, that if the VM and the
management
device both generate DHCP requests they should get
- Original Message -
From: Allon Mureinik amure...@redhat.com
To: users users@ovirt.org
Cc: Juan Hernandez jhern...@redhat.com, Doron Fediuck
dfedi...@redhat.com
Sent: Thursday, January 23, 2014 12:12:57 PM
Subject: What component to use when reporting bugs on
Il 22/01/2014 18:32, Federico Alberto Sayd ha scritto:
Hello:
Why Ovirt 3.3.2. installs vdsm 4.14 on Centos 6.5??
please yum clean all, yum update ovirt-release, and then retry.
I am installing 5 nodes with Centos 6.5.
I have installed two nodes, I have added:
1 - epel repo
Hello,
I had a mysterios behaviour in the webinterface twice this week.
The Snapshot list of a VM remained empty in Firefox although
I know that snapshots exist.
The Create Snapshot button was still working and issued the
right commands. Nevertheless the list remained empty.
Opening an IE
Hello,
engine 3.3.3 beta1 on fedora 19 fully updated (for f19 repos).
I would like to upgrade and test 3.3.3 RC
I just updated ovirt-release so that now I have
ovirt-release-fedora-10.0.1-2.noarch
yum clean metadata
modified new ovirt repofile enabling updates-testing and disabling beta
- Original Message -
From: Gianluca Cecchi gianluca.cec...@gmail.com
To: users users@ovirt.org
Sent: Thursday, January 23, 2014 12:49:50 PM
Subject: [Users] Possible problems testing 3.3.3 RC
Hello,
engine 3.3.3 beta1 on fedora 19 fully updated (for f19 repos).
I would like to
On Thu, Jan 23, 2014 at 12:08 PM, Yedidyah Bar David wrote:
Because it's in the updates repo, not sure why is that. Yaniv/Eyal?
--
Didi
Indeed
I see that
1) In this repo
http://resources.ovirt.org/releases/beta/rpm/Fedora/19/noarch/
I would expect dwh for 3.4 while I have
Hi!
I´ve gone through upgrading from 3.3.2 to 3.3.3 RC on CentOS 6.5 in our
test environment, went off without a hitch, so good job guys! However
something I´d very much like to see fixed is live snapshots for CentOS,
especially since it seems to be fixed already for Fedora. Issue already
been
On 1/22/14 11:42 PM, Andrew Lau wrote:
That sounds exactly what I did, do you mind putting those log files into the BZ
saves me from having to find some
hardware and replicate it again.
So what i did was I ended up just nuking the whole OS, and getting a clean
start. First after doing all
Good luck! If you get time it'd really be great if you could post those
logs (ovirt-hosted-engine-setup.log and vdsm.log) to BZ 1055153 for me?
It'd help them debug the issue and save me from having to find a new spare
server.
I spent a good 2 days trying to work through the alpha jungle so hope
On 1/23/14 7:00 AM, Andrew Lau wrote:
Good luck! If you get time it'd really be great if you could post those logs
(ovirt-hosted-engine-setup.log and
vdsm.log) to BZ 1055153 for me? It'd help them debug the issue and save me from
having to find a new spare server.
I spent a good 2 days
On 23/01/2014 06:59, Yedidyah Bar David wrote:
Hi,
- Original Message -
From: Jon Archer j...@rosslug.org.uk To: users users@ovirt.org Sent:
Thursday, January 23, 2014 2:48:13 AM Subject: Re: [Users] oVirt 3.4.0
issues with storage I rebooted the server (probably could have
Il 23/01/2014 12:12, Gianluca Cecchi ha scritto:
On Thu, Jan 23, 2014 at 12:08 PM, Yedidyah Bar David wrote:
Because it's in the updates repo, not sure why is that. Yaniv/Eyal?
--
Didi
Indeed
I see that
1) In this repo
http://resources.ovirt.org/releases/beta/rpm/Fedora/19/noarch/
Just been delving through the update logs,
My upgrade was to alpha first, then I saw the beta release notice and
took it to beta about 1 hour later.
I found a line in the alpha to beta upgrade which suggests it modifies
the export file ISO_DOMAIN entry so in my case the default
Hi,
- Original Message -
From: Jonathan Archer j...@rosslug.org.uk
To: users users@ovirt.org
Sent: Thursday, January 23, 2014 2:23:16 PM
Subject: Re: [Users] oVirt 3.4.0 issues with storage
On 23/01/2014 06:59, Yedidyah Bar David wrote:
Hi,
- Original Message -
Hi,
- Original Message -
From: Jonathan Archer j...@rosslug.org.uk
To: d...@redhat.com
Cc: users users@ovirt.org
Sent: Thursday, January 23, 2014 2:37:49 PM
Subject: Re: [Users] oVirt 3.4.0 issues with storage
Just been delving through the update logs,
My upgrade was to alpha
On Thu, Jan 23, 2014 at 1:23 PM, Sandro Bonazzola wrote:
Il 23/01/2014 12:12, Gianluca Cecchi ha scritto:
[snip]
2) in this repo
http://resources.ovirt.org/releases/updates-testing/rpm/Fedora/19/noarch/
I would expect dwh for 3.3.3 while I have
ovirt-engine-dwh-3.3.3-1.fc19.noarch.rpm
Hi!
I built small ovirt cluster with one dedicated node (A) and one node (B)
with engine and gluster storage. Test VM succesfuly started at node A,
but cannot start at node B. In an engine.log I see error could not open
disk image ... Permission denied. SELinux disabled on both nodes. All
nodes
Il 23/01/2014 14:07, Gianluca Cecchi ha scritto:
On Thu, Jan 23, 2014 at 1:23 PM, Sandro Bonazzola wrote:
Il 23/01/2014 12:12, Gianluca Cecchi ha scritto:
[snip]
2) in this repo
http://resources.ovirt.org/releases/updates-testing/rpm/Fedora/19/noarch/
I would expect dwh for 3.3.3 while I
Hi,
I'm currently trying to setup a hosted-engine on a RHEL6 host
with nightly repository (because 3.4 BETA didn't work either):
[root@host ~]# hosted-engine --deploy
[ INFO ] Stage: Initializing
Continuing will configure this host for serving as hypervisor and
create a VM where you
Yedidyah Bar David wrote:
Hi all,
I installed ovirt engine 3.4 beta with two VMs - one opensuse 13.1
with ovirt-guest-agent from [1] and another fedora 19 with oga from
fedora. Both of them seem to work well - I can see installed applications,
logged in user, memory usage. But in both of them,
Hi all,
I installed ovirt engine 3.4 beta with two VMs - one opensuse 13.1
with ovirt-guest-agent from [1] and another fedora 19 with oga from
fedora. Both of them seem to work well - I can see installed applications,
logged in user, memory usage. But in both of them, under Network Interfaces,
On Mon, Dec 16, 2013 at 10:52 AM, Vered Volansky wrote:
Gianluca, Huntxu
It looks like huntxu's solution is the way to go.
I'd appreciate it if any of you will open a bug on this issue and inform the
list.
If there's anything else regarding this issue please ask.
Thanks,
Vered
-
Il 23/01/2014 14:24, Frank Wall ha scritto:
Hi,
I'm currently trying to setup a hosted-engine on a RHEL6 host
with nightly repository (because 3.4 BETA didn't work either):
Do you have the same issue you've with nightly?
[root@host ~]# hosted-engine --deploy
[ INFO ] Stage:
Il 22/01/2014 21:32, Brad House ha scritto:
I'm trying to test out the oVirt Hosted Engine, but am experiencing a
failure early on and was hoping someone could point me in the right
direction. I'm not familiar enough with the architecture of oVirt
to start to debug this situation.
- Original Message -
From: Joop jvdw...@xs4all.nl
Cc: users users@ovirt.org
Sent: Thursday, January 23, 2014 3:25:15 PM
Subject: Re: [Users] Guest Agent Data under Network Interfaces empty
Yedidyah Bar David wrote:
Hi all,
I installed ovirt engine 3.4 beta with two VMs - one
Hi Karli,
Normally we configure the host's default gateway on the ovirtmgmt network.
If your engine is in the same subnet as all of your hosts, then it's not to
define
a getway on the ovirtmgmt network.
From 3.3, you can define gateways on the other networks. These will be used via
source
Hi Sandro,
On Thu, Jan 23, 2014 at 02:28:29PM +0100, Sandro Bonazzola wrote:
Do you have the same issue you've with nightly?
on BETA the hosted-engine setup fails (earlier) with another issue that seems
to be
fixed in NIGHTLY:
2014-01-23 13:50:58 DEBUG otopi.plugins.otopi.services.rhel
Hi Sandro,
This is exactly the same issue I had with BZ 1055153, I recognize all the
error messages exactly and the way it occurred. There was also the earlier
message on the list which I mentioned my workaround.
Thanks,
Andrew
On Fri, Jan 24, 2014 at 12:28 AM, Sandro Bonazzola
On 22/01/14 21:32, Dan Kenigsberg wrote:
On Wed, Jan 22, 2014 at 01:57:35PM -0300, Federico Alberto Sayd wrote:
On 22/01/14 12:13, Dan Kenigsberg wrote:
snip
The supervdsm.log whith the lines logged yesterday:
http://pastebin.com/kpXrRd2w
On an unrelated matter: this log includes
Il 23/01/2014 14:39, Frank Wall ha scritto:
Hi Sandro,
On Thu, Jan 23, 2014 at 02:28:29PM +0100, Sandro Bonazzola wrote:
Do you have the same issue you've with nightly?
on BETA the hosted-engine setup fails (earlier) with another issue that seems
to be
fixed in NIGHTLY:
2014-01-23
Il 23/01/2014 14:49, Gianluca Cecchi ha scritto:
hello,
at http://www.ovirt.org/OVirt_3.4.0_release_notes
the what's new section seems to be empty.
Release notes page is still under writing
What major/minor features one would expect as added value passing from
3.3.3 to 3.4?
Any other
On 23/01/14 07:02, Moti Asayag wrote:
- Original Message -
From: Federico Sayd fs...@uncu.edu.ar
To: users@ovirt.org
Sent: Wednesday, January 22, 2014 2:22:01 AM
Subject: [Users] Centos 6.5 and bonding: A slave interface is not properly
configured
Hello:
I am having problems
Hi,
Installing a fresh fedora 19 minimal install and ovirt 3.4 beta got me
stuck again. Maybe we should do a bit more QA before releasing a beta?
--== CONFIGURATION PREVIEW ==--
Engine database name: engine
Engine database secured
Hi,
- Original Message -
From: Jorick Astrego j.astr...@netbulae.eu
To: users users@ovirt.org
Sent: Thursday, January 23, 2014 4:01:24 PM
Subject: [Users] ovirt 3.4 beta on F19: engine-setup error Failed to execute
stage 'Misc configuration': Command '/bin/systemctl' failed to
On 01/23/2014 08:24 AM, Frank Wall wrote:
Hi,
I'm currently trying to setup a hosted-engine on a RHEL6 host
with nightly repository (because 3.4 BETA didn't work either):
snip
[ ERROR ] Failed to execute stage 'Environment customization': [Errno 111]
Connection refused
[ INFO ] Stage:
- Original Message -
From: Yedidyah Bar David d...@redhat.com
To: Joop jvdw...@xs4all.nl
Cc: users users@ovirt.org
Sent: Thursday, January 23, 2014 3:30:27 PM
Subject: Re: [Users] Guest Agent Data under Network Interfaces empty
- Original Message -
From: Joop
On Thu, 2014-01-23 at 10:48 +0100, Fabian Deutsch wrote:
Am Mittwoch, den 22.01.2014, 14:07 +0100 schrieb Sandro Bonazzola:
Latest RPMs
repository to be enabled for testing the release are listed in the
release notes page [2].
Hey,
the following oVirt Node ISO (based on CentOS
On 22/01/14 21:31, Dan Kenigsberg wrote:
On Wed, Jan 22, 2014 at 01:57:35PM -0300, Federico Alberto Sayd wrote:
On 22/01/14 12:13, Dan Kenigsberg wrote:
On Wed, Jan 22, 2014 at 07:43:52AM +, Karli Sjöberg wrote:
On Tue, 2014-01-21 at 21:22 -0300, Federico Sayd wrote:
Hello:
I am having
On Thu, Jan 23, 2014 at 12:23 PM, Karli Sjöberg karli.sjob...@slu.se wrote:
Hi!
I´ve gone through upgrading from 3.3.2 to 3.3.3 RC on CentOS 6.5 in our
test environment, went off without a hitch, so good job guys! However
something I´d very much like to see fixed is live snapshots for CentOS,
On Thu, Jan 23, 2014 at 3:21 PM, Jorick Astrego wrote:
Yes that's it:
Adding --otopi-environment=OVESETUP_SYSTEM/shmmax=int:68719476736
works.
I never thought a known issue would crop up so soon, so I just started
installing.
Thanks
hello,
is it correct to say that if I put something
As part of test day I wanted to install engine 3.4.0-0.5.beta1.fc20
from ovirt-3.4.0-prerelease
and I can see following info:
Transaction check error:
file /usr/lib/python2.7/site-packages/sos/plugins/postgresql.py
conflicts between attempted installs of
On Thu, Jan 23, 2014 at 09:13:14AM -0500, Brad House wrote:
Yep, I get the _same_ exact issue. Please see my e-mail chain from
yesterday with the subject line:
oVirt 3.4.0 beta - Hosted Engine Setup -- issues
Thanks for the pointer, I guess I missed that :-( As discussed on
IRC the issue is
Hi. I have a question regarding to the ovirt node. Im trying to disable o
set selinux in permissive mode..I have modified /etc/sysconfig/selinux and
then use the persist command on it but sestats output shows the following:
[root@ovirth1 ~]# sestatus
SELinux status: enabled
Hi. I have configured an ovirt-engine to manage an ovirt node succesfully.
I have created VM and all runs well but im trying to do some escenario
testing and i have found an issue.
If somehow the ovirt node is rebooted(Power failure, crash, manual reboot,
etc) when its comes up it does not
Hello again,
I'm new to VLANs and have a few questions. Right now I just have the mgmt
interface (bridged with eth0) on my all-in-one oVirt test setup. I want to
separate some VMs from the public facing net, which I think means that they
need to be on a different VLAN. I created two new
Il 23/01/2014 16:07, Gianluca Cecchi ha scritto:
On Thu, Jan 23, 2014 at 3:21 PM, Jorick Astrego wrote:
Yes that's it:
Adding --otopi-environment=OVESETUP_SYSTEM/shmmax=int:68719476736
works.
I never thought a known issue would crop up so soon, so I just started
installing.
Thanks
Il 23/01/2014 16:14, Piotr Kliczewski ha scritto:
As part of test day I wanted to install engine 3.4.0-0.5.beta1.fc20
from ovirt-3.4.0-prerelease
and I can see following info:
Transaction check error:
file /usr/lib/python2.7/site-packages/sos/plugins/postgresql.py
conflicts between
If you enable VLAN tagging on the management network, which is configured
on eth0 (Which also provides internet access from my understanding) then
you will connectivity as (I assume) your physical switches aren't configured
for VLANs.
For an all-in-one, what I would suggest is the following
Am Donnerstag, den 23.01.2014, 12:26 -0300 schrieb Francisco Pérez:
Hi. I have a question regarding to the ovirt node. Im trying to
disable o set selinux in permissive mode..I have
modified /etc/sysconfig/selinux and then use the persist command on it
but sestats output shows the following:
Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco Pérez:
Hi. I have configured an ovirt-engine to manage an ovirt node
succesfully. I have created VM and all runs well but im trying to do
some escenario testing and i have found an issue.
If somehow the ovirt node is
Hey,
we've updated the oVirt Node iso:
http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.201401231512draft.vdsm.el6.iso
This updated contains fixes for this two problems:
Bug 1057050 - manual instalation screen freezes at 75%
Bug 1057064 - ovirt-node cannot be added as a
On 01/23/2014 06:12 PM, Fabian Deutsch wrote:
Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco Pérez:
Hi. I have configured an ovirt-engine to manage an ovirt node
succesfully. I have created VM and all runs well but im trying to do
some escenario testing and i have found an
On 01/23/2014 04:20 PM, Yedidyah Bar David wrote:
- Original Message -
From: Yedidyah Bar David d...@redhat.com
To: Joop jvdw...@xs4all.nl
Cc: users users@ovirt.org
Sent: Thursday, January 23, 2014 3:30:27 PM
Subject: Re: [Users] Guest Agent Data under Network Interfaces empty
-
On 01/23/2014 05:00 PM, Sander Grendelman wrote:
On Thu, Jan 23, 2014 at 12:23 PM, Karli Sjöberg karli.sjob...@slu.se wrote:
Hi!
I´ve gone through upgrading from 3.3.2 to 3.3.3 RC on CentOS 6.5 in our
test environment, went off without a hitch, so good job guys! However
something I´d very much
In version 3.4. The authentication has been refactored. How do I add 389-ds as
my authentication backend without the use of Kerberos? This was supposed to be
possible in 3.4 ___
Users mailing list
Users@ovirt.org
On Thu, 23 Jan 2014 10:59:57 -0500 (EST) Assaf wrote:
AM If you enable VLAN tagging on the management network, which is
AM configured on eth0 (Which also provides internet access from my
AM understanding) then you will connectivity as (I assume) your physical
AM switches aren't configured for
- Original Message -
From: Itamar Heim ih...@redhat.com
To: Andrew Lau and...@andrewklau.com
Cc: users users@ovirt.org
Sent: Monday, January 20, 2014 2:33:08 PM
Subject: Re: [Users] Issues starting hosted engine VM
On 01/20/2014 02:27 PM, Andrew Lau wrote:
On Mon, Jan 20, 2014
Backing Storage: Gluster Replica
Storage Domain: NFS
Ovirt Hosts: CentOS 6.5
Ovirt version: 3.3.2
Network: GigE
# of VM's: 3 - two Linux guests are idle, one Windows guest is installing
updates.
I've installed a Windows 2008 R2 guest with virtio disk, and all the
drivers from the latest virtio
On 23/01/14 10:43 -0300, Federico Alberto Sayd wrote:
On 22/01/14 21:32, Dan Kenigsberg wrote:
On Wed, Jan 22, 2014 at 01:57:35PM -0300, Federico Alberto Sayd wrote:
On 22/01/14 12:13, Dan Kenigsberg wrote:
snip
The supervdsm.log whith the lines logged yesterday:
No matter what provider I use, it keeps complaining about kerberos
From: midnightst...@msn.com
To: users@ovirt.org
Date: Thu, 23 Jan 2014 12:13:03 -0500
Subject: [Users] Manage domains
In version 3.4. The authentication has been refactored. How do I add 389-ds as
my authentication backend
Hi Robert,
You can use mgmt untagged but if it's a non-vm network. If you tag mgmt
network, ovirt will configure a vlan interface and add it to ovirtmgmt,
so you'll get a disruption when network gets restarted to take the changes.
Regards,
___
Users
Hi Itamar,
I don't know if I get your post right, but to me, it seems that if so
many users hit the same rock, it should mean that this should be
documented somewhere visible and in my opinion, push on getting bug
1049476 https://bugzilla.redhat.com/show_bug.cgi?id=1049476 solved asap.
Regards,
Sorry, privY on eth1.
Assaf Muller, Cloud Networking Engineer
Red Hat
- Original Message -
From: Robert Story rst...@tislabs.com
To: Assaf Muller amul...@redhat.com
Cc: users users@ovirt.org
Sent: Thursday, January 23, 2014 7:11:50 PM
Subject: Re: [Users] networking: basic vlan help
What is the purpose of PubY on eth1?
Assaf Muller, Cloud Networking Engineer
Red Hat
- Original Message -
From: Robert Story rst...@tislabs.com
To: Assaf Muller amul...@redhat.com
Cc: users users@ovirt.org
Sent: Thursday, January 23, 2014 7:11:50 PM
Subject: Re: [Users] networking:
On Thu, 23 Jan 2014 13:33:07 -0500 (EST) Assaf wrote:
AM Sorry, privY on eth1.
For VM to VM communication that doesn't need to go over the public net..
Robert
--
Senior Software Engineer @ Parsons
signature.asc
Description: PGP signature
___
Users
Then the currently offered topology is to have ovirtmgmt on eth1 untagged, and
non-VM, and have
privY as a VM, tagged network on eth1. That would require the physical switch
to be VLAN-aware
and configured properly. oVirt wise you should have no problems using the GUI
to move to that
topology
Hi Robert,
As I said before, you'll have network disruptions everytime you change
network topology and that's not because of ovirt but because you need to
restart network to set the new interfaces, routing tables and addresses,
etc.
This does not mean that you loose access to your hosts, if
- Original Message -
From: Fabian Deutsch fabi...@redhat.com
To: Francisco Pérez fpere...@gmail.com, VDSM Project Development
vdsm-de...@lists.fedorahosted.org
Cc: users@ovirt.org
Sent: Thursday, January 23, 2014 5:12:17 PM
Subject: Re: [Users] ovirtmgmt vanishes after reboot
Hi,
I did some migrations with v2v and p2v (most of them to RHEV, but
there's not really a difference between RHEV and oVirt).
Sources where VMware ESX, KVM-servers (hosted on RHEL and Debian), Xen
(hosted on an old SUSE server) and physical machines for p2v.
The servers I used to run virt-v2v
- Original Message -
On Thu, 2014-01-23 at 10:48 +0100, Fabian Deutsch wrote:
Am Mittwoch, den 22.01.2014, 14:07 +0100 schrieb Sandro Bonazzola:
Latest RPMs
repository to be enabled for testing the release are listed in the
release notes page [2].
Hey,
the
Hello,
Do you guys know of a script that I could use to backup VMs automatically
but creating the lower downtime? I modified a bit the 'virt-backup.pl'
script by Daniel Berteaud dan...@firewall-services.com so it
authenticates against Ovirt as shown below:
Sys::Virt::CRED_AUTHNAME,
On Thu, Jan 23, 2014 at 05:12:17PM +0100, Fabian Deutsch wrote:
Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco Pérez:
Hi. I have configured an ovirt-engine to manage an ovirt node
succesfully. I have created VM and all runs well but im trying to do
some escenario testing and
- Original Message -
From: Itamar Heim ih...@redhat.com
To: Yedidyah Bar David d...@redhat.com, Joop jvdw...@xs4all.nl
Cc: users users@ovirt.org, Moti Asayag masa...@redhat.com, Lior
Vernia lver...@redhat.com
Sent: Thursday, January 23, 2014 6:45:11 PM
Subject: Re: [Users]
- Original Message -
From: Vojtech Szocs vsz...@redhat.com
To: users users@ovirt.org
Sent: Thursday, January 23, 2014 8:42:37 PM
Subject: [Users] Adding storage domain via ovirt-node host
Hi,
I'm using oVirt Node ISO prepared by Fabian:
Hi,
It looks like my only option to get a console is using spice-proxy as in
http://www.ovirt.org/Features/Spice_Proxy
However I am not sure how to make it work. I have installed all three required
packages on the engine (3.3.2). And my engine-config shows:
[root@xyz ~]# engine-config -a |
On 01/23/2014 08:34 PM, Juan Pablo Lorier wrote:
Hi Itamar,
I don't know if I get your post right, but to me, it seems that if so
many users hit the same rock, it should mean that this should be
documented somewhere visible and in my opinion, push on getting bug
1049476
On 01/23/2014 10:05 PM, David Li wrote:
Hi,
It looks like my only option to get a console is using spice-proxy as in
http://www.ovirt.org/Features/Spice_Proxy
However I am not sure how to make it work. I have installed all three required
packages on the engine (3.3.2). And my engine-config
On 01/23/2014 08:04 PM, Adam Litke wrote:
On 23/01/14 10:43 -0300, Federico Alberto Sayd wrote:
On 22/01/14 21:32, Dan Kenigsberg wrote:
On Wed, Jan 22, 2014 at 01:57:35PM -0300, Federico Alberto Sayd wrote:
On 22/01/14 12:13, Dan Kenigsberg wrote:
snip
The supervdsm.log whith the lines
On 01/23/2014 08:06 PM, Maurice James wrote:
No matter what provider I use, it keeps complaining about kerberos
From: midnightst...@msn.com
To: users@ovirt.org
Date: Thu, 23 Jan 2014 12:13:03 -0500
Subject: [Users] Manage
Sorry, I must've overlooked this email - I'll try reproduce and open a new
bz.
On Fri, Jan 24, 2014 at 4:13 AM, Doron Fediuck dfedi...@redhat.com wrote:
- Original Message -
From: Itamar Heim ih...@redhat.com
To: Andrew Lau and...@andrewklau.com
Cc: users users@ovirt.org
On 23/01/14 23:02 +0200, Itamar Heim wrote:
On 01/23/2014 08:04 PM, Adam Litke wrote:
On 23/01/14 10:43 -0300, Federico Alberto Sayd wrote:
On 22/01/14 21:32, Dan Kenigsberg wrote:
On Wed, Jan 22, 2014 at 01:57:35PM -0300, Federico Alberto Sayd wrote:
On 22/01/14 12:13, Dan Kenigsberg wrote:
On 01/23/2014 07:46 PM, Steve Dainard wrote:
Backing Storage: Gluster Replica
Storage Domain: NFS
Ovirt Hosts: CentOS 6.5
Ovirt version: 3.3.2
Network: GigE
# of VM's: 3 - two Linux guests are idle, one Windows guest is
installing updates.
I've installed a Windows 2008 R2 guest with virtio
Itamar,
The web page isn't very clear how to set this.
What's the someProxy supposed to be?
engine-config -s SpiceProxyDefault=someProxy
- Original Message -
From: Itamar Heim ih...@redhat.com
To: David Li david...@sbcglobal.net; users@ovirt.org users@ovirt.org
Cc:
Sent:
- Original Message -
From: Itamar Heim ih...@redhat.com
To: Maurice James midnightst...@msn.com, users@ovirt.org, Barak Azulay
bazu...@redhat.com, Juan Antonio
Hernandez Fernandez jhern...@redhat.com
Sent: Thursday, January 23, 2014 11:03:48 PM
Subject: Re: [Users] Manage domains
I have two options, virtio and virtio-scsi.
I was using virtio, and have also attempted virtio-scsi on another Windows
guest with the same results.
Using the newest drivers, virtio-win-0.1-74.iso.
*Steve Dainard *
IT Infrastructure Manager
Miovision http://miovision.com/ | *Rethink Traffic*
Still not working.
I believe spice-proxy has setup on the engine:
SpiceUsbAutoShare: true version: general
SpiceProxyDefault: myProxy version: general
ClientModeSpiceDefault: Auto version: general
In the web portal, I also see Enable SPICE Proxy checked under SPICE
options.
But no matter
Are we sure that the issue is the guest I/O - what's the raw performance on the
host accessing the gluster storage?
- Original Message -
From: Steve Dainard sdain...@miovision.com
To: Itamar Heim ih...@redhat.com
Cc: Ronen Hod r...@redhat.com, users users@ovirt.org, Sanjay
Rao
99 matches
Mail list logo