[ovirt-users] Trying to understand the mixed storage configuration options.

[Jason Ziemba]

I'm fairly new to oVirt (coming from ProxMox) and trying to wrap my head
around the mixed (local/NAS) data domain options that are available.

I'm trying to configure a set of systems to have local storage, as their
primary data storage domain, though also want to have the ability to have a
NAS based data domain for guests that are 'mobile' between hosts.
Currently I'm able to do one or the other, but not both (so it seems).

When I put all of the systems in to a single cluster (or single
data-center) I'm able to have the shared data domain, though have only
found the ability to configure one system for local storage (not all of
them).   When I split them out in to separate data centers, they all have
their local data domain working, but only a single dc is able to access the
shared data domain at a time.

Am I missing something along the way (probably fairly obvious) that does
exactly what I'm outlining, or is this functionality not available by
design?

Any assistance/guidance is greatly appreciated.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Problem remove snapshot

[Marcelo Leandro]

hello,

i have problem other vm now:
the vm contain two disk, only a09bfb5d-3922-406d-b4e0-daafad96ffec mark
illegal in snapshot tab.

information database:
 imagestatus |   storage_pool_id|
 storage_domain_id   |image_group_id|
   im
age_guid  |   parentid
-+--+--+--+
--+--
   1 | 77e24b20-9d21-4952-a089-3c5c592b4e6d |
0dc658da-feed-498b-bfd2-3950f7198e11 | e94d711c-b50b-43bd-a67c-cb4643808d9d
| b9478a6c-28c5-4
03b-a889-226d16d399a5 | ----
   1 | 77e24b20-9d21-4952-a089-3c5c592b4e6d |
6e5cce71-3438-4045-9d54-607123e0557e | 05aab51a-8342-4d1f-88c4-6d733da5959a
| 023110fa-7d24-4
6ec-ada8-d617d7c2adaf | a09bfb5d-3922-406d-b4e0-daafad96ffec
   4 | 77e24b20-9d21-4952-a089-3c5c592b4e6d |
6e5cce71-3438-4045-9d54-607123e0557e | 05aab51a-8342-4d1f-88c4-6d733da5959a
| a09bfb5d-3922-4
06d-b4e0-daafad96ffec | ----

erro msg :
Failed to delete snapshot 'Backup the VM' for VM 'vm-name.

vm-disk-info.py output:

Disk e94d711c-b50b-43bd-a67c-cb4643808d9d
(sd:0dc658da-feed-498b-bfd2-3950f7198e11)
Volumes:
b9478a6c-28c5-403b-a889-226d16d399a5
Disk 05aab51a-8342-4d1f-88c4-6d733da5959a
(sd:6e5cce71-3438-4045-9d54-607123e0557e)
Warning: volume 023110fa-7d24-46ec-ada8-d617d7c2adaf is in chain but illegal
Volumes:
a09bfb5d-3922-406d-b4e0-daafad96ffec

engine.log :

https://www.dropbox.com/s/yfsaexpzdz3ngm1/engine.rar?dl=0

Thanks.


2016-05-11 18:39 GMT-03:00 Greg Padgett :

> On 05/11/2016 09:49 AM, Marcelo Leandro wrote:
>
>> hello,
>> i have problem for delete one snapshot.
>> i see the  error:
>> Due to partial snapshot removal, Snapshot 'Backup the VM' of VM 'vmname'
>> now contains only the following disks: 'vmdiskname'.
>>
>>
>> Failed to delete snapshot 'Backup the VM' for VM 'vmname'.
>>
>
> Hi Marcelo,
>
> Can you try to remove the snapshot again and attach the engine log if it
> fails?
>
> Thanks,
> Greg
>
> information in db :
>>   imagestatus |   storage_pool_id|
>>   storage_domain_id   |image_group_id|
>>   im
>> age_guid  |   parentid
>>
>> -+--+--+--+
>> --+--
>> 1 | 77e24b20-9d21-4952-a089-3c5c592b4e6d |
>> 6e5cce71-3438-4045-9d54-607123e0557e |
>> bfb1e6b5-7a06-41e4-b8b4-2e237ed0c7ab | 1bb7bd08-5ee8-4
>> a3b-8978-c15e15d1c5e4 | 6008671c-2f9d-48de-94f3-cc7d6273de31
>> 4 | 77e24b20-9d21-4952-a089-3c5c592b4e6d |
>> 6e5cce71-3438-4045-9d54-607123e0557e |
>> bfb1e6b5-7a06-41e4-b8b4-2e237ed0c7ab | 6008671c-2f9d-4
>> 8de-94f3-cc7d6273de31 | ----
>>
>>
>> output the script vm-disk-info.py
>>
>>
>>   Disk bfb1e6b5-7a06-41e4-b8b4-2e237ed0c7ab
>> (sd:6e5cce71-3438-4045-9d54-607123e0557e)
>> Warning: volume 1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4 is in chain but
>> illegal
>>  Volumes:
>>  6008671c-2f9d-48de-94f3-cc7d6273de31
>>  1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4
>>
>>
>> output the  command md5sum :
>> volume :   1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4
>> 4c05c8258ed5746da6ac2cdb80c8974e  1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4
>>
>> ec74d4d8189a5ea24720349868ff7ab7  1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4
>>
>> the volume change
>>
>> output the command md5sum :
>> volume: 6008671c-2f9d-48de-94f3-cc7d6273de31
>>
>> 86daf229ad0b65fb8be3a3de6b0ee840  6008671c-2f9d-48de-94f3-cc7d6273de31
>>
>> 86daf229ad0b65fb8be3a3de6b0ee840  6008671c-2f9d-48de-94f3-cc7d6273de31
>>
>> the volume not change
>>
>> Thanks.
>>
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Problem remove snapshot

[Greg Padgett]

On 05/11/2016 09:49 AM, Marcelo Leandro wrote:

hello,
i have problem for delete one snapshot.
i see the  error:
Due to partial snapshot removal, Snapshot 'Backup the VM' of VM 'vmname'
now contains only the following disks: 'vmdiskname'.


Failed to delete snapshot 'Backup the VM' for VM 'vmname'.


Hi Marcelo,

Can you try to remove the snapshot again and attach the engine log if it 
fails?


Thanks,
Greg


information in db :
  imagestatus |   storage_pool_id|
  storage_domain_id   |image_group_id|
  im
age_guid  |   parentid
-+--+--+--+
--+--
1 | 77e24b20-9d21-4952-a089-3c5c592b4e6d |
6e5cce71-3438-4045-9d54-607123e0557e |
bfb1e6b5-7a06-41e4-b8b4-2e237ed0c7ab | 1bb7bd08-5ee8-4
a3b-8978-c15e15d1c5e4 | 6008671c-2f9d-48de-94f3-cc7d6273de31
4 | 77e24b20-9d21-4952-a089-3c5c592b4e6d |
6e5cce71-3438-4045-9d54-607123e0557e |
bfb1e6b5-7a06-41e4-b8b4-2e237ed0c7ab | 6008671c-2f9d-4
8de-94f3-cc7d6273de31 | ----


output the script vm-disk-info.py


  Disk bfb1e6b5-7a06-41e4-b8b4-2e237ed0c7ab
(sd:6e5cce71-3438-4045-9d54-607123e0557e)
Warning: volume 1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4 is in chain but illegal
 Volumes:
 6008671c-2f9d-48de-94f3-cc7d6273de31
 1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4


output the  command md5sum :
volume :   1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4
4c05c8258ed5746da6ac2cdb80c8974e  1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4

ec74d4d8189a5ea24720349868ff7ab7  1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4

the volume change

output the command md5sum :
volume: 6008671c-2f9d-48de-94f3-cc7d6273de31

86daf229ad0b65fb8be3a3de6b0ee840  6008671c-2f9d-48de-94f3-cc7d6273de31

86daf229ad0b65fb8be3a3de6b0ee840  6008671c-2f9d-48de-94f3-cc7d6273de31

the volume not change

Thanks.


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] RemoveDiskSnapshots error's on engine log

[Ivo Rütsche]

Hi List

At the moment, we replace a filer and we have to move the VM's to 
another filer. We have a lot of problems with it. Sometime we have to 
restart the engine, sometime we have to move the image arround and 
sometimes we don't have a chance to remove the snapshots. When the VM is 
running, most of the time the snapshot remove never starts.


Now, i found these errors every second in the engine.log since today:

2016-05-11 23:25:29,102 ERROR 
[org.ovirt.engine.core.bll.CommandsFactory] 
(DefaultQuartzScheduler_Worker-90) [] Error in invocating CTOR of 
command 'RemoveDiskSnapshots': null
2016-05-11 23:25:29,102 ERROR 
[org.ovirt.engine.core.utils.timer.SchedulerUtilQuartzImpl] 
(DefaultQuartzScheduler_Worker-90) [] Failed to invoke scheduled method 
invokeCallbackMethods: null
2016-05-11 23:25:30,104 ERROR 
[org.ovirt.engine.core.bll.CommandsFactory] 
(DefaultQuartzScheduler_Worker-66) [] Error in invocating CTOR of 
command 'RemoveDiskSnapshots': null
2016-05-11 23:25:30,104 ERROR 
[org.ovirt.engine.core.utils.timer.SchedulerUtilQuartzImpl] 
(DefaultQuartzScheduler_Worker-66) [] Failed to invoke scheduled method 
invokeCallbackMethods: null
2016-05-11 23:25:31,105 ERROR 
[org.ovirt.engine.core.bll.CommandsFactory] 
(DefaultQuartzScheduler_Worker-76) [] Error in invocating CTOR of 
command 'RemoveDiskSnapshots': null
2016-05-11 23:25:31,105 ERROR 
[org.ovirt.engine.core.utils.timer.SchedulerUtilQuartzImpl] 
(DefaultQuartzScheduler_Worker-76) [] Failed to invoke scheduled method 
invokeCallbackMethods: null


I try everything, but i can't find the problem.

Anyone who have an idea, where i have to search?

Thank's for help.

Ivo

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Ovirt All in one spice-sound

[David Jaša]

Sorry, once more:

HTML5 client supports audio in trunk only so you'd have to grab it from
there as well as spice-server... (spice-server has at least been
released with html5 support).

David

On St, 2016-05-11 at 18:02 +0200, David Jaša wrote:
> Audio should work with thick client (launched using both plug-in and .vv
> file - natively) in all cases.
> 
> HTML5 client IIRC supports audio. It requires opus codec support on the
> server however which isn't included in el7 spice-server yet. Keep your
> fingers crossed for 7.3 or try with your own build of more recent spice
> server, rebuilt with opus support enabled (but in that case, use some
> _released_ version, the master has seen a lot of churn in last 1/2 year
> without much real-world testing).
> 
> David
> 
> 
> On St, 2016-05-11 at 17:04 +0200, Johan Vermeulen wrote:
> > And is audio supposed to work with auto, Native cliënt, html5,...every
> > option?
> > 
> > Op 11-mei-2016 16:45 schreef "David Jaša" :
> > On St, 2016-05-11 at 16:31 +0200, Johan Vermeulen wrote:
> > > Hello David,
> > >
> > >
> > > thank you very much for the reply.
> > >
> > >
> > > Both host, client and the machine from wich I connect
> > through Spice is
> > > Centos7
> > >
> > > In the guest machine, I see an audio card with lspci:
> > >
> > > 00:04.0 Audio device: Intel Corporation
> > 82801FB/FBM/FR/FW/FRW (ICH6
> > > Family) High Definition Audio Controller (rev 01)
> > > Subsystem: Red Hat, Inc QEMU Virtual Machine
> > > Physical Slot: 4
> > > Flags: bus master, fast devsel, latency 0, IRQ 11
> > > Memory at fe02 (32-bit, non-prefetchable) [size=16K]
> > > Kernel driver in use: snd_hda_intel
> > >
> > >
> > > What I did now ( I think ) is check "use guest agent" in
> > admin
> > > console and now it works.
> > 
> > This is weird, guest agent has nothing to do with audio -
> > audio is
> > driven purely by VM's OS components (PA and alsa in this
> > case).
> > 
> > Anyway, I'm glad it works for you.
> > 
> > David
> > 
> > >
> > >
> > > Thanks again for the help.
> > >
> > >
> > > greetings, J.
> > >
> > >
> > >
> > >
> > > 2016-05-11 7:16 GMT+02:00 David Jaša :
> > > Hi Johan,
> > >
> > > On Út, 2016-05-10 at 18:23 +0200, Johan Vermeulen
> > wrote:
> > > > Hello All,
> > > >
> > > >
> > > > I've set up an all in one install on Ovirt3.5
> > > >
> > > >
> > > > All though I've done it before, for the life of me
> > > >
> > > > I can't get sound to work with Spice sessions.
> > > >
> > > > I tried auto, native, browser plugin and html5.
> > > >
> > > >
> > > > Following this page:.
> > > > http://www.ovirt.org/develop/infra/testing/spice/
> > > >
> > > > I've installed xorg-x11-drv-qxl and installed and
> > started
> > > > spice-vdagent
> > >
> > > So the VM is Fedora/RHEL/CentOS? What is the client
> > system and
> > > virt-viewer/remote-viewer version btw?
> > >
> > > >
> > > >
> > > > in Edit virtual -machine-console, enable sound
> > card is
> > > checked.
> > > >
> > >
> > > can the VM see the soundcard? (look to Sound
> > Settings or lspci
> > > or alsa
> > > utilities or ...)
> > >
> > > >
> > > > What else is needed to get this to work?
> > > >
> > >
> > > If the sound card is not detected in the VM, can you
> > paste
> > > qemu command
> > > line? (It's available on the host
> > > in /var/log/libvirt/qemu/VM_NAME.log,
> > > it's a very long line right after domain - VM in
> > libvirt
> > > terminology -
> > > start message).
> > >
> > > HTH,
> > >
> > > David
> > >
> > > >
> > > > Many thanks for any advise
> > > >
> > > > Greetings, J.
> > > > ___
> > > > Users mailing list
> > > > Users@ovirt.org
> > > > http://lists.ov

Re: [ovirt-users] Ovirt All in one spice-sound

[David Jaša]

On St, 2016-05-11 at 18:02 +0200, David Jaša wrote:
> Audio should work with thick client (launched using both plug-in and .vv
> file - natively) in all cases.
> 
> HTML5 client IIRC supports audio. It requires opus codec support on the
> server however which isn't included in el7 spice-server yet. Keep your
> fingers crossed for 7.3 or try with your own build of more recent spice
> server, rebuilt with opus support enabled (but in that case, use some
> _released_ version, the master has seen a lot of churn in last 1/2 year
> without much real-world testing).
> 
> David
> 
> 
> On St, 2016-05-11 at 17:04 +0200, Johan Vermeulen wrote:
> > And is audio supposed to work with auto, Native cliënt, html5,...every
> > option?
> > 
> > Op 11-mei-2016 16:45 schreef "David Jaša" :
> > On St, 2016-05-11 at 16:31 +0200, Johan Vermeulen wrote:
> > > Hello David,
> > >
> > >
> > > thank you very much for the reply.
> > >
> > >
> > > Both host, client and the machine from wich I connect
> > through Spice is
> > > Centos7
> > >
> > > In the guest machine, I see an audio card with lspci:
> > >
> > > 00:04.0 Audio device: Intel Corporation
> > 82801FB/FBM/FR/FW/FRW (ICH6
> > > Family) High Definition Audio Controller (rev 01)
> > > Subsystem: Red Hat, Inc QEMU Virtual Machine
> > > Physical Slot: 4
> > > Flags: bus master, fast devsel, latency 0, IRQ 11
> > > Memory at fe02 (32-bit, non-prefetchable) [size=16K]
> > > Kernel driver in use: snd_hda_intel
> > >
> > >
> > > What I did now ( I think ) is check "use guest agent" in
> > admin
> > > console and now it works.
> > 
> > This is weird, guest agent has nothing to do with audio -
> > audio is
> > driven purely by VM's OS components (PA and alsa in this
> > case).
> > 
> > Anyway, I'm glad it works for you.
> > 
> > David
> > 
> > >
> > >
> > > Thanks again for the help.
> > >
> > >
> > > greetings, J.
> > >
> > >
> > >
> > >
> > > 2016-05-11 7:16 GMT+02:00 David Jaša :
> > > Hi Johan,
> > >
> > > On Út, 2016-05-10 at 18:23 +0200, Johan Vermeulen
> > wrote:
> > > > Hello All,
> > > >
> > > >
> > > > I've set up an all in one install on Ovirt3.5
> > > >
> > > >
> > > > All though I've done it before, for the life of me
> > > >
> > > > I can't get sound to work with Spice sessions.
> > > >
> > > > I tried auto, native, browser plugin and html5.
> > > >
> > > >
> > > > Following this page:.
> > > > http://www.ovirt.org/develop/infra/testing/spice/
> > > >
> > > > I've installed xorg-x11-drv-qxl and installed and
> > started
> > > > spice-vdagent
> > >
> > > So the VM is Fedora/RHEL/CentOS? What is the client
> > system and
> > > virt-viewer/remote-viewer version btw?
> > >
> > > >
> > > >
> > > > in Edit virtual -machine-console, enable sound
> > card is
> > > checked.
> > > >
> > >
> > > can the VM see the soundcard? (look to Sound
> > Settings or lspci
> > > or alsa
> > > utilities or ...)
> > >
> > > >
> > > > What else is needed to get this to work?
> > > >
> > >
> > > If the sound card is not detected in the VM, can you
> > paste
> > > qemu command
> > > line? (It's available on the host
> > > in /var/log/libvirt/qemu/VM_NAME.log,
> > > it's a very long line right after domain - VM in
> > libvirt
> > > terminology -
> > > start message).
> > >
> > > HTH,
> > >
> > > David
> > >
> > > >
> > > > Many thanks for any advise
> > > >
> > > > Greetings, J.
> > > > ___
> > > > Users mailing list
> > > > Users@ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> > >
> > >
> > >
> > > ___
> > > Users mailing list
> > 

Re: [ovirt-users] Ovirt All in one spice-sound

[David Jaša]

Audio should work with thick client (launched using both plug-in and .vv
file - natively) in all cases.

HTML5 client IIRC supports audio. It requires opus codec support on the
server however which isn't included in el7 spice-server yet. Keep your
fingers crossed for 7.3 or try with your own build of more recent spice
server, rebuilt with opus support enabled (but in that case, use some
_released_ version, the master has seen a lot of churn in last 1/2 year
without much real-world testing).

David


On St, 2016-05-11 at 17:04 +0200, Johan Vermeulen wrote:
> And is audio supposed to work with auto, Native cliënt, html5,...every
> option?
> 
> Op 11-mei-2016 16:45 schreef "David Jaša" :
> On St, 2016-05-11 at 16:31 +0200, Johan Vermeulen wrote:
> > Hello David,
> >
> >
> > thank you very much for the reply.
> >
> >
> > Both host, client and the machine from wich I connect
> through Spice is
> > Centos7
> >
> > In the guest machine, I see an audio card with lspci:
> >
> > 00:04.0 Audio device: Intel Corporation
> 82801FB/FBM/FR/FW/FRW (ICH6
> > Family) High Definition Audio Controller (rev 01)
> > Subsystem: Red Hat, Inc QEMU Virtual Machine
> > Physical Slot: 4
> > Flags: bus master, fast devsel, latency 0, IRQ 11
> > Memory at fe02 (32-bit, non-prefetchable) [size=16K]
> > Kernel driver in use: snd_hda_intel
> >
> >
> > What I did now ( I think ) is check "use guest agent" in
> admin
> > console and now it works.
> 
> This is weird, guest agent has nothing to do with audio -
> audio is
> driven purely by VM's OS components (PA and alsa in this
> case).
> 
> Anyway, I'm glad it works for you.
> 
> David
> 
> >
> >
> > Thanks again for the help.
> >
> >
> > greetings, J.
> >
> >
> >
> >
> > 2016-05-11 7:16 GMT+02:00 David Jaša :
> > Hi Johan,
> >
> > On Út, 2016-05-10 at 18:23 +0200, Johan Vermeulen
> wrote:
> > > Hello All,
> > >
> > >
> > > I've set up an all in one install on Ovirt3.5
> > >
> > >
> > > All though I've done it before, for the life of me
> > >
> > > I can't get sound to work with Spice sessions.
> > >
> > > I tried auto, native, browser plugin and html5.
> > >
> > >
> > > Following this page:.
> > > http://www.ovirt.org/develop/infra/testing/spice/
> > >
> > > I've installed xorg-x11-drv-qxl and installed and
> started
> > > spice-vdagent
> >
> > So the VM is Fedora/RHEL/CentOS? What is the client
> system and
> > virt-viewer/remote-viewer version btw?
> >
> > >
> > >
> > > in Edit virtual -machine-console, enable sound
> card is
> > checked.
> > >
> >
> > can the VM see the soundcard? (look to Sound
> Settings or lspci
> > or alsa
> > utilities or ...)
> >
> > >
> > > What else is needed to get this to work?
> > >
> >
> > If the sound card is not detected in the VM, can you
> paste
> > qemu command
> > line? (It's available on the host
> > in /var/log/libvirt/qemu/VM_NAME.log,
> > it's a very long line right after domain - VM in
> libvirt
> > terminology -
> > start message).
> >
> > HTH,
> >
> > David
> >
> > >
> > > Many thanks for any advise
> > >
> > > Greetings, J.
> > > ___
> > > Users mailing list
> > > Users@ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> >
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> 
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://l

Re: [ovirt-users] Adding another host to my cluster

[Gervais de Montbrun]

Hi Folks,

I hate to reply to my own message, but I'm really hoping someone can help me 
with my issue
http://lists.ovirt.org/pipermail/users/2016-May/039690.html 


Does anyone have a suggestion for me? If there is any more information that I 
can provide that would help you to help me, please advise.

Cheers,
Gervais



> On May 9, 2016, at 1:42 PM, Gervais de Montbrun  > wrote:
> 
> Hi All,
> 
> I'm trying to add a third host into my oVirt cluster. I have hosted engine 
> setup on the first two. It's failing to finish the hosted-engine --deploy on 
> this third host. I wiped the server and did a CentOS 7 minimum install and 
> ran it again to have a clean machine.
> 
> My setup:
> CentOS 7 clean install
> yum install -y http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm 
> 
> yum install -y ovirt-hosted-engine-setup
> yum upgrade -y && reboot
> systemctl disable NetworkManager ; systemctl stop NetworkManager ; systemctl 
> disable firewalld ; systemctl stop firewalld
> hosted-engine --deploy
> 
> hosted-engine --deploy always throws an error:
> [ ERROR ] The VDSM host was found in a failed state. Please check engine and 
> bootstrap installation logs.
> [ ERROR ] Unable to add Cultivar2 to the manager
> and then echo's
> [ INFO  ] Waiting for VDSM hardware info
> ...
> [ ERROR ] Failed to execute stage 'Closing up': VDSM did not start within 120 
> seconds
> [ INFO  ] Stage: Clean up
> [ INFO  ] Generating answer file 
> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509131103.conf'
> [ INFO  ] Stage: Pre-termination
> [ INFO  ] Stage: Termination
> [ ERROR ] Hosted Engine deployment failed: this system is not reliable, 
> please check the issue, fix and redeploy
>  Log file is located at 
> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
> 
> Full output of hosted-engine --deploy included in the attached zip file.
> I've also included vdsm.log (There is more than one tries worth of tries in 
> there).
> You'll also find the ovirt-hosted-engine-setup-20160509130658-qb8ev0.log 
> listed above.
> 
> This is my "test" setup. Cultivar0 is my first host and my nfs server for 
> storage. I have two hosts in the setup already and everything is working 
> fine. The host does show up in the oVirt admin, but shows "Installed Failed"
> 
> 
> Trying to reinstall from within the interface just fails again.
> 
> The ovirt bridge interface is not configured and there are no config files in 
> /etc/sysconfi/network-scripts related to ovirt.
> 
> OS:
> [root@cultivar2 ovirt-hosted-engine-setup]# cat /etc/redhat-release 
> CentOS Linux release 7.2.1511 (Core) 
> 
> [root@cultivar2 ovirt-hosted-engine-setup]# uname -a
> Linux cultivar2.grove.silverorange.com 
>  3.10.0-327.13.1.el7.x86_64 #1 SMP 
> Thu Mar 31 16:04:38 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
> 
> Versions:
> [root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i ovirt
> libgovirt-0.3.3-1.el7_2.1.x86_64
> ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
> ovirt-host-deploy-1.4.1-1.el7.centos.noarch
> ovirt-vmconsole-1.0.0-1.el7.centos.noarch
> ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
> ovirt-release36-007-1.noarch
> ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
> ovirt-setup-lib-1.0.1-1.el7.centos.noarch
> ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
> [root@cultivar2 ovirt-hosted-engine-setup]# 
> [root@cultivar2 ovirt-hosted-engine-setup]# 
> [root@cultivar2 ovirt-hosted-engine-setup]# 
> [root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i virt
> libvirt-daemon-driver-secret-1.2.17-13.el7_2.4.x86_64
> virt-viewer-2.0-6.el7.x86_64
> libgovirt-0.3.3-1.el7_2.1.x86_64
> libvirt-daemon-kvm-1.2.17-13.el7_2.4.x86_64
> ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
> fence-virt-0.3.2-2.el7.x86_64
> virt-what-1.13-6.el7.x86_64
> libvirt-python-1.2.17-2.el7.x86_64
> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
> libvirt-daemon-config-nwfilter-1.2.17-13.el7_2.4.x86_64
> libvirt-lock-sanlock-1.2.17-13.el7_2.4.x86_64
> libvirt-daemon-driver-nodedev-1.2.17-13.el7_2.4.x86_64
> libvirt-daemon-driver-network-1.2.17-13.el7_2.4.x86_64
> libvirt-daemon-driver-storage-1.2.17-13.el7_2.4.x86_64
> ovirt-host-deploy-1.4.1-1.el7.centos.noarch
> virt-v2v-1.28.1-1.55.el7.centos.2.x86_64
> ovirt-vmconsole-1.0.0-1.el7.centos.noarch
> ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
> libvirt-client-1.2.17-13.el7_2.4.x86_64
> libvirt-daemon-driver-nwfilter-1.2.17-13.el7_2.4.x86_64
> ovirt-release36-007-1.noarch
> libvirt-daemon-driver-interface-1.2.17-13.el7_2.4.x86_64
> libvirt-daemon-driver-qemu-1.2.17-13.el7_2.4.x86_64
> ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
> ovirt-setup-lib-1.0.1-1.el7.centos.noarch
> ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
> 
> I also have a series of stuck tasks

Re: [ovirt-users] Ovirt All in one spice-sound

[Johan Vermeulen]

And is audio supposed to work with auto, Native cliënt, html5,...every
option?
Op 11-mei-2016 16:45 schreef "David Jaša" :

> On St, 2016-05-11 at 16:31 +0200, Johan Vermeulen wrote:
> > Hello David,
> >
> >
> > thank you very much for the reply.
> >
> >
> > Both host, client and the machine from wich I connect through Spice is
> > Centos7
> >
> > In the guest machine, I see an audio card with lspci:
> >
> > 00:04.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> > Family) High Definition Audio Controller (rev 01)
> > Subsystem: Red Hat, Inc QEMU Virtual Machine
> > Physical Slot: 4
> > Flags: bus master, fast devsel, latency 0, IRQ 11
> > Memory at fe02 (32-bit, non-prefetchable) [size=16K]
> > Kernel driver in use: snd_hda_intel
> >
> >
> > What I did now ( I think ) is check "use guest agent" in admin
> > console and now it works.
>
> This is weird, guest agent has nothing to do with audio - audio is
> driven purely by VM's OS components (PA and alsa in this case).
>
> Anyway, I'm glad it works for you.
>
> David
>
> >
> >
> > Thanks again for the help.
> >
> >
> > greetings, J.
> >
> >
> >
> >
> > 2016-05-11 7:16 GMT+02:00 David Jaša :
> > Hi Johan,
> >
> > On Út, 2016-05-10 at 18:23 +0200, Johan Vermeulen wrote:
> > > Hello All,
> > >
> > >
> > > I've set up an all in one install on Ovirt3.5
> > >
> > >
> > > All though I've done it before, for the life of me
> > >
> > > I can't get sound to work with Spice sessions.
> > >
> > > I tried auto, native, browser plugin and html5.
> > >
> > >
> > > Following this page:.
> > > http://www.ovirt.org/develop/infra/testing/spice/
> > >
> > > I've installed xorg-x11-drv-qxl and installed and started
> > > spice-vdagent
> >
> > So the VM is Fedora/RHEL/CentOS? What is the client system and
> > virt-viewer/remote-viewer version btw?
> >
> > >
> > >
> > > in Edit virtual -machine-console, enable sound card is
> > checked.
> > >
> >
> > can the VM see the soundcard? (look to Sound Settings or lspci
> > or alsa
> > utilities or ...)
> >
> > >
> > > What else is needed to get this to work?
> > >
> >
> > If the sound card is not detected in the VM, can you paste
> > qemu command
> > line? (It's available on the host
> > in /var/log/libvirt/qemu/VM_NAME.log,
> > it's a very long line right after domain - VM in libvirt
> > terminology -
> > start message).
> >
> > HTH,
> >
> > David
> >
> > >
> > > Many thanks for any advise
> > >
> > > Greetings, J.
> > > ___
> > > Users mailing list
> > > Users@ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> >
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] cinder docker image issue

[Simone Tiraboschi]

On Wed, May 11, 2016 at 4:00 PM, Nathanaël Blanchet  wrote:
> Hello,
> What about this bug?
> https://bugzilla.redhat.com/show_bug.cgi?format=multiple&id=1195131
> I'm trying to test cinder, but centos-rdo-cinder image can't start and logs
> are : /start.sh: line 14: check_required_vars: command not found
> is this plugin ovirt-engine-setup-plugin-dockerc ready to use for
> production?

No, unfortunately no since we need to follow a change in kollaglue
containers structure.

There is an outgoing effort here:
https://gerrit.ovirt.org/#/c/55484/

> Thanks
>
> --
> Nathanaël Blanchet
>
> Supervision réseau
> Pôle Infrastrutures Informatiques
> 227 avenue Professeur-Jean-Louis-Viala
> 34193 MONTPELLIER CEDEX 5
> Tél. 33 (0)4 67 54 84 55
> Fax  33 (0)4 67 54 84 14
> blanc...@abes.fr
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Rép. : RE: Iso issue

[Jack Greene]

That’s why you can’t see it in the engine.  UID:GID need to be 36:36.  You can 
test this by manually changing the ownership in the ISO directory.

 

chown 36:36 *.iso

 

Your nfs-server is stripping the UID

 

My exports file looks like

[root@s2 ~]# cat /etc/exports

/mnt/iso192.168.1.0/24(rw,sync,no_acl)

 

From: François DIOT [mailto:dio...@esiee-amiens.fr] 
Sent: Wednesday, May 11, 2016 7:36 AM
To: users@ovirt.org; j...@sdhelp.com
Subject: Rép. : RE: [ovirt-users] Iso issue

 

result of ls -l of the /ISO/.../--/ directory :

[root@localhost ----]# ls -l
total 1923016
-rw-r-. 1 nobody nobody 999292928 11 mai   12:47 fedora_.iso
-rw-r-. 1 nobody nobody 999292928 11 mai   15:28 fedora.iso

The UID and GID are 0. 

>>> "Jack Greene" mailto:j...@sdhelp.com> > 11/05/16 16:17 >>>



Did the nfs-server change the UID:GID of the uploaded file?

 

If you do a ls –l of the /ISO/.../--/ directory, does it still show 
36:36 for the iso?

 

 

From: users-boun...@ovirt.org   
[mailto:users-boun...@ovirt.org] On Behalf Of François DIOT
Sent: Wednesday, May 11, 2016 5:56 AM
To: mail...@ovirt.org  ; users@ovirt.org 
 
Subject: [ovirt-users] Iso issue

 

Hello,

I just start using Ovirt one week ago and I want to install Ovirt in my company.

Currently all my VM are on VMware with two NFS storages. One for the iso and 
the other for all the software.

I started the setup following the Ovirt quick Start and I setup the Ovirt 
Engine on a Centos 6.7 and the Node on a Ovirt Node 3.6

I created and attached successfully a Data NFS Storage. I created a new ISO NFS 
Storage because I don't want to use the IS0_DOMAIN created during the setup.

When I running " # engine-iso-uploader list " I've got :

[root@localhost ~]# engine-iso-uploader list
Please provide the REST API password for the admin@internal oVirt Engine user 
(CTRL+D to abort): 
ISO Storage Domain Name   | Datacenter| ISO Domain Status
ISO   | Default   | active

So I upload my images with " engine-iso-uploader upload -i ISO fedora.iso" 

[root@localhost Bureau]# engine-iso-uploader upload -i ISO fedora.iso
Please provide the REST API password for the admin@internal oVirt Engine user 
(CTRL+D to abort): 
Uploading, please wait...
INFO: Start uploading fedora.iso 
Uploading: [] 100%
INFO: fedora.iso uploaded successfully


I can see the image on the file /ISO/.../--/ but impossible to see 
them on the Manager administration portal when I select The Images Tab of my 
ISO Storage.

Do you have any ideas ? 
Thank you,

Francois 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Ovirt All in one spice-sound

[David Jaša]

On St, 2016-05-11 at 16:31 +0200, Johan Vermeulen wrote:
> Hello David,
> 
> 
> thank you very much for the reply.
> 
> 
> Both host, client and the machine from wich I connect through Spice is
> Centos7
> 
> In the guest machine, I see an audio card with lspci:
> 
> 00:04.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) High Definition Audio Controller (rev 01)
> Subsystem: Red Hat, Inc QEMU Virtual Machine
> Physical Slot: 4
> Flags: bus master, fast devsel, latency 0, IRQ 11
> Memory at fe02 (32-bit, non-prefetchable) [size=16K]
> Kernel driver in use: snd_hda_intel
> 
> 
> What I did now ( I think ) is check "use guest agent" in admin
> console and now it works.

This is weird, guest agent has nothing to do with audio - audio is
driven purely by VM's OS components (PA and alsa in this case).

Anyway, I'm glad it works for you.

David

> 
> 
> Thanks again for the help.
> 
> 
> greetings, J. 
> 
> 
> 
> 
> 2016-05-11 7:16 GMT+02:00 David Jaša :
> Hi Johan,
> 
> On Út, 2016-05-10 at 18:23 +0200, Johan Vermeulen wrote:
> > Hello All,
> >
> >
> > I've set up an all in one install on Ovirt3.5
> >
> >
> > All though I've done it before, for the life of me
> >
> > I can't get sound to work with Spice sessions.
> >
> > I tried auto, native, browser plugin and html5.
> >
> >
> > Following this page:.
> > http://www.ovirt.org/develop/infra/testing/spice/
> >
> > I've installed xorg-x11-drv-qxl and installed and started
> > spice-vdagent
> 
> So the VM is Fedora/RHEL/CentOS? What is the client system and
> virt-viewer/remote-viewer version btw?
> 
> >
> >
> > in Edit virtual -machine-console, enable sound card is
> checked.
> >
> 
> can the VM see the soundcard? (look to Sound Settings or lspci
> or alsa
> utilities or ...)
> 
> >
> > What else is needed to get this to work?
> >
> 
> If the sound card is not detected in the VM, can you paste
> qemu command
> line? (It's available on the host
> in /var/log/libvirt/qemu/VM_NAME.log,
> it's a very long line right after domain - VM in libvirt
> terminology -
> start message).
> 
> HTH,
> 
> David
> 
> >
> > Many thanks for any advise
> >
> > Greetings, J.
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> 
> 
> 
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Rép. : RE: Iso issue

[François DIOT]

result of ls -l of the /ISO/.../--/ directory :

[root@localhost ----]# ls -l
total 1923016
-rw-r-. 1 nobody nobody 999292928 11 mai   12:47 fedora_.iso
-rw-r-. 1 nobody nobody 999292928 11 mai   15:28 fedora.iso

The UID and GID are 0. 

>>> "Jack Greene"  11/05/16 16:17 >>>
 Did the nfs-server change the UID:GID of the uploaded file?
 
If you do a ls –l of the /ISO/.../--/ directory, does it
still show 36:36 for the iso?
 
 
From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf
Of François DIOT
Sent: Wednesday, May 11, 2016 5:56 AM
To: mail...@ovirt.org; users@ovirt.org
Subject: [ovirt-users] Iso issue


 
Hello,

I just start using Ovirt one week ago and I want to install Ovirt in my
company.

Currently all my VM are on VMware with two NFS storages. One for the iso
and the other for all the software.

I started the setup following the Ovirt quick Start and I setup the
Ovirt Engine on a Centos 6.7 and the Node on a Ovirt Node 3.6

I created and attached successfully a Data NFS Storage. I created a new
ISO NFS Storage because I don't want to use the IS0_DOMAIN created
during the setup.

When I running " # engine-iso-uploader list " I've got :

[root@localhost ~]# engine-iso-uploader list
Please provide the REST API password for the admin@internal oVirt Engine
user (CTRL+D to abort): 
ISO Storage Domain Name   | Datacenter| ISO Domain
Status
ISO   | Default   | active

So I upload my images with " engine-iso-uploader upload -i ISO
fedora.iso" 

[root@localhost Bureau]# engine-iso-uploader upload -i ISO fedora.iso
Please provide the REST API password for the admin@internal oVirt Engine
user (CTRL+D to abort): 
Uploading, please wait...
INFO: Start uploading fedora.iso 
Uploading: [] 100%
INFO: fedora.iso uploaded successfully


I can see the image on the file /ISO/.../--/ but impossible
to see them on the Manager administration portal when I select The
Images Tab of my ISO Storage.

Do you have any ideas ? 
Thank you,

Francois 


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Ovirt All in one spice-sound

[Johan Vermeulen]

Hello David,

thank you very much for the reply.

Both host, client and the machine from wich I connect through Spice is
Centos7
In the guest machine, I see an audio card with lspci:

00:04.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
High Definition Audio Controller (rev 01)
Subsystem: Red Hat, Inc QEMU Virtual Machine
Physical Slot: 4
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at fe02 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: snd_hda_intel

What I did now ( I think ) is check "use guest agent" in admin  console and
now it works.

Thanks again for the help.

greetings, J.



2016-05-11 7:16 GMT+02:00 David Jaša :

> Hi Johan,
>
> On Út, 2016-05-10 at 18:23 +0200, Johan Vermeulen wrote:
> > Hello All,
> >
> >
> > I've set up an all in one install on Ovirt3.5
> >
> >
> > All though I've done it before, for the life of me
> >
> > I can't get sound to work with Spice sessions.
> >
> > I tried auto, native, browser plugin and html5.
> >
> >
> > Following this page:.
> > http://www.ovirt.org/develop/infra/testing/spice/
> >
> > I've installed xorg-x11-drv-qxl and installed and started
> > spice-vdagent
>
> So the VM is Fedora/RHEL/CentOS? What is the client system and
> virt-viewer/remote-viewer version btw?
>
> >
> >
> > in Edit virtual -machine-console, enable sound card is checked.
> >
>
> can the VM see the soundcard? (look to Sound Settings or lspci or alsa
> utilities or ...)
>
> >
> > What else is needed to get this to work?
> >
>
> If the sound card is not detected in the VM, can you paste qemu command
> line? (It's available on the host in /var/log/libvirt/qemu/VM_NAME.log,
> it's a very long line right after domain - VM in libvirt terminology -
> start message).
>
> HTH,
>
> David
>
> >
> > Many thanks for any advise
> >
> > Greetings, J.
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] ovirt-engine yum install

[Budur Nagaraju]

I have done the update install.

Thanks,
Nagaraju
On May 11, 2016 7:53 PM, "Jack Greene"  wrote:

> The filelists don’t exist on the repo?  Did you run ‘yum –y update’ before
> running the install?
>
>
>
> Jack
>
>
>
> *From:* users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *On
> Behalf Of *Budur Nagaraju
> *Sent:* Wednesday, May 11, 2016 6:45 AM
> *To:* users 
> *Subject:* [ovirt-users] ovirt-engine yum install
>
>
>
> Hi
>
> while doing yum install "yum -y install ovirt-engine" getting  error which
> url not found,can you please help me on that ?
>
>
>
> http://pastebin.com/rX744rcW
>
> Thanks,
>
> Nagaraju
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] ovirt-engine yum install

[Jack Greene]

The filelists don’t exist on the repo?  Did you run ‘yum –y update’ before 
running the install?  

 

Jack

 

From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of 
Budur Nagaraju
Sent: Wednesday, May 11, 2016 6:45 AM
To: users 
Subject: [ovirt-users] ovirt-engine yum install

 

Hi 

while doing yum install "yum -y install ovirt-engine" getting  error which url 
not found,can you please help me on that ?



http://pastebin.com/rX744rcW

Thanks,

Nagaraju

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Exclamation mark on Windows guests Ovirt 3.6.5

[Jack Greene]

Hi Darryl,

This drove me nuts too.  For some reason the guest drivers were missing
something (still don't know for sure).  I tried changing timezones, etc.

Finally I found the "oVirt-toolsSetup_3.6.0_0.2_master.fc22.iso"

The setup on that image worked with Windows 7 Enterprise, Windows 10
Enterprise and Windows Server 2012r2.  My exclamation marks are gone.

Good luck, Jack

-Original Message-
From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of
Tomas Jelinek
Sent: Wednesday, May 11, 2016 12:07 AM
To: Darryl Bond 
Cc: users 
Subject: Re: [ovirt-users] Exclamation mark on Windows guests Ovirt 3.6.5

Hi Darryl,

do you have an ovirt guest agent installed on your guests? If yes, could you
please check in webadmin in VM main tab -> pick your VM which show this
exclamation mark -> guest info subtab -> what is in "type" part?

Thanx,
Tomas

- Original Message -
> From: "Darryl Bond" 
> To: "users" 
> Sent: Wednesday, May 11, 2016 1:31:42 AM
> Subject: [ovirt-users] Exclamation mark on Windows guests Ovirt 3.6.5
> 
> Why do all my windows guests display an exclamation mark with the 
> message 'Actual operating system type differs from the configuration' They
don't.
> 
> There is a variety of Windows OS installed from XP to Server 2102 all 
> configured correctly.
> 
> My linux VM's don't have an exclamation mark
> 
> 
> I installed the QEMU guest tools on an XP guest. No difference.
> 
> vdsClient -s 0 getVmStats  show no obvious difference between 
> the Windows and linux guests.
> 
> 
> 
> Regards
> 
> Darryl
> 
> ?
> 
> 
> 
> 
> The contents of this electronic message and any attachments are 
> intended only for the addressee and may contain legally privileged, 
> personal, sensitive or confidential information. If you are not the 
> intended addressee, and have received this email, any transmission, 
> distribution, downloading, printing or photocopying of the contents of 
> this message or attachments is strictly prohibited. Any legal 
> privilege or confidentiality attached to this message and attachments 
> is not waived, lost or destroyed by reason of delivery to any person 
> other than intended addressee. If you have received this message and 
> are not the intended addressee you should notify the sender by return 
> email and destroy all copies of the message and any attachments. 
> Unless expressly attributed, the views expressed in this email do not
necessarily represent the views of the company.
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] virt-in-virt problem: DHCP failing for a container in a oVirt VM

[Will Dennis]

OK; I searched the oVirt site for 'engine-config' (unfamiliar with it) and 
found the following page:
https://www.ovirt.org/develop/developer-guide/engine/engine-config-examples/

I see the instructions on it for "Adding VM custom properties (macspoof)", so I 
did execute the referenced engine-config line, and then restarted the 
ovirt-engine service. I then went and powered off the VM I'd like to deactivate 
mac spoof filtering on, then went in to the User Portal and clicked "Edit" on 
the VM. However, I can not find a "Custom Properties" dialog anywhere in the VM 
Edit UI (yes, I did enable Advanced options.) Where should I be seeing this?


-Original Message-
From: Yedidyah Bar David [mailto:d...@redhat.com] 
Sent: Tuesday, May 10, 2016 4:31 PM
To: Will Dennis
Cc: Simone Tiraboschi; Yaniv Kaul; users@ovirt.org
Subject: Re: [ovirt-users] virt-in-virt problem: DHCP failing for a container 
in a oVirt VM

On Tue, May 10, 2016 at 8:36 PM, Will Dennis  wrote:
> Hi Simone,
>
> Sorry but I'm just getting back to this... Not sure where/how one might 
> implement the hook you have indicated... It looks to be VM-specific, but I 
> don't see anywhere in either the Admin UI or the User portal UI to set such a 
> parameter... Can you give me instructions on how to implement this?
>

Please check the README that Simone linked to.

You have to add a property using engine-config.
It will appear in the ui when editing a VM, under custom properties.

> -Original Message-
> From: Simone Tiraboschi [mailto:stira...@redhat.com]
> Sent: Monday, May 09, 2016 3:54 AM
> To: Yaniv Kaul
> Cc: Will Dennis; users@ovirt.org
> Subject: Re: [ovirt-users] virt-in-virt problem: DHCP failing for a container 
> in a oVirt VM
>
> There is also a specific VDSM hook to address this configuration:
> https://github.com/oVirt/vdsm/tree/master/vdsm_hooks/macspoof
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users



-- 
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Iso issue

[Jack Greene]

Did the nfs-server change the UID:GID of the uploaded file?

 

If you do a ls –l of the /ISO/.../--/ directory, does it still
show 36:36 for the iso?

 

 

From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of
François DIOT
Sent: Wednesday, May 11, 2016 5:56 AM
To: mail...@ovirt.org; users@ovirt.org
Subject: [ovirt-users] Iso issue

 

Hello,

I just start using Ovirt one week ago and I want to install Ovirt in my
company.

Currently all my VM are on VMware with two NFS storages. One for the iso and
the other for all the software.

I started the setup following the Ovirt quick Start and I setup the Ovirt
Engine on a Centos 6.7 and the Node on a Ovirt Node 3.6

I created and attached successfully a Data NFS Storage. I created a new ISO
NFS Storage because I don't want to use the IS0_DOMAIN created during the
setup.

When I running " # engine-iso-uploader list " I've got :

[root@localhost ~]# engine-iso-uploader list
Please provide the REST API password for the admin@internal oVirt Engine
user (CTRL+D to abort): 
ISO Storage Domain Name   | Datacenter| ISO Domain Status
ISO   | Default   | active

So I upload my images with " engine-iso-uploader upload -i ISO fedora.iso" 

[root@localhost Bureau]# engine-iso-uploader upload -i ISO fedora.iso
Please provide the REST API password for the admin@internal oVirt Engine
user (CTRL+D to abort): 
Uploading, please wait...
INFO: Start uploading fedora.iso 
Uploading: [] 100%
INFO: fedora.iso uploaded successfully


I can see the image on the file /ISO/.../--/ but impossible to
see them on the Manager administration portal when I select The Images Tab
of my ISO Storage.

Do you have any ideas ? 
Thank you,

Francois 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] SELinux and oVirt

[Cam Mac]

Ah, ok that makes sense. For the node, is it enough to use the 'reinstall
node' option from the GUI, or is it better to reinstall the OS and then
deploy it again?

Thanks,

Cam

On Wed, May 11, 2016 at 2:40 PM, Michal Skrivanek <
michal.skriva...@redhat.com> wrote:

>
> On 11 May 2016, at 15:24, Cam Mac  wrote:
>
> Thanks Michal, if reinstalling the engine, (which also had SELinux
> disabled at install), would the best way be to backup the engine and then
> restore just the ovirt config?
>
>
> for engine..well, VM security is not related to that, those are running on
> hypervisors, not the engine. So for any functionality/security it’s
> irrelevant what SELinux state it’s in
> I’m not sure if relabeling with restorecon is not enough (it sould work
> also on nodes, but as I said, it’s likely more safe to reinstall just to be
> really really sure:)
> Simone, am I right about the restorecon for engine?
>
>
> Cheers,
>
> Cam
>
> On Wed, May 11, 2016 at 2:14 PM, Michal Skrivanek <
> michal.skriva...@redhat.com> wrote:
>
>>
>> > On 11 May 2016, at 15:02, Cam Mac  wrote:
>> >
>> > Hi,
>> >
>> > In the oVirt guide, it says that "SELinux is being used by default on
>> oVirt Node", but then goes on to say that if you have problems you should
>> set it to permissive mode. I have had a few things fail due to being
>> blocked by SELinux on a node I later enabled SELinux on, as it was off at
>> install time. The other node which has had SELinux on from the start and so
>> far has not had any oVirt operations blocked. I am guessing that the oVirt
>> install process creates the necessary rules to allow vdsm to run under
>> SELinux. So if you want to set SELinux to enforcing after installation, is
>> there a script to do this, or is it better to just reinstall the node or
>> engine, rather than trying to work out the individual exceptions?
>>
>> For oVirt node it’s easier to reinstall it, it doesn’t persist much and
>> it’s the easies way how to get the labelling right
>>
>> Thanks,
>> michal
>>
>> >
>> > Thanks,
>> >
>> > Cam
>> > ___
>> > Users mailing list
>> > Users@ovirt.org
>> > http://lists.ovirt.org/mailman/listinfo/users
>>
>>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] cinder docker image issue

[Nathanaël Blanchet]

Hello,
What about this bug?
https://bugzilla.redhat.com/show_bug.cgi?format=multiple&id=1195131
I'm trying to test cinder, but centos-rdo-cinder image can't start and 
logs are : /start.sh: line 14: check_required_vars: command not found
is this plugin ovirt-engine-setup-plugin-dockerc ready to use for 
production?

Thanks

--
Nathanaël Blanchet

Supervision réseau
Pôle Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5   
Tél. 33 (0)4 67 54 84 55
Fax  33 (0)4 67 54 84 14
blanc...@abes.fr

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Problem remove snapshot

[Marcelo Leandro]

hello,
i have problem for delete one snapshot.
i see the  error:
Due to partial snapshot removal, Snapshot 'Backup the VM' of VM 'vmname'
now contains only the following disks: 'vmdiskname'.


Failed to delete snapshot 'Backup the VM' for VM 'vmname'.

information in db :
 imagestatus |   storage_pool_id|
 storage_domain_id   |image_group_id|
   im
age_guid  |   parentid
-+--+--+--+
--+--
   1 | 77e24b20-9d21-4952-a089-3c5c592b4e6d |
6e5cce71-3438-4045-9d54-607123e0557e | bfb1e6b5-7a06-41e4-b8b4-2e237ed0c7ab
| 1bb7bd08-5ee8-4
a3b-8978-c15e15d1c5e4 | 6008671c-2f9d-48de-94f3-cc7d6273de31
   4 | 77e24b20-9d21-4952-a089-3c5c592b4e6d |
6e5cce71-3438-4045-9d54-607123e0557e | bfb1e6b5-7a06-41e4-b8b4-2e237ed0c7ab
| 6008671c-2f9d-4
8de-94f3-cc7d6273de31 | ----


output the script vm-disk-info.py


 Disk bfb1e6b5-7a06-41e4-b8b4-2e237ed0c7ab
(sd:6e5cce71-3438-4045-9d54-607123e0557e)
Warning: volume 1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4 is in chain but illegal
Volumes:
6008671c-2f9d-48de-94f3-cc7d6273de31
1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4


output the  command md5sum :
volume :   1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4
4c05c8258ed5746da6ac2cdb80c8974e  1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4

ec74d4d8189a5ea24720349868ff7ab7  1bb7bd08-5ee8-4a3b-8978-c15e15d1c5e4

the volume change

output the command md5sum :
volume: 6008671c-2f9d-48de-94f3-cc7d6273de31

86daf229ad0b65fb8be3a3de6b0ee840  6008671c-2f9d-48de-94f3-cc7d6273de31

86daf229ad0b65fb8be3a3de6b0ee840  6008671c-2f9d-48de-94f3-cc7d6273de31

the volume not change

Thanks.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] ovirt-engine yum install

[Budur Nagaraju]

Hi

while doing yum install "yum -y install ovirt-engine" getting  error which
url not found,can you please help me on that ?


http://pastebin.com/rX744rcW

Thanks,
Nagaraju
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] SELinux and oVirt

[Michal Skrivanek]

> On 11 May 2016, at 15:24, Cam Mac  wrote:
> 
> Thanks Michal, if reinstalling the engine, (which also had SELinux disabled 
> at install), would the best way be to backup the engine and then restore just 
> the ovirt config?

for engine..well, VM security is not related to that, those are running on 
hypervisors, not the engine. So for any functionality/security it’s irrelevant 
what SELinux state it’s in
I’m not sure if relabeling with restorecon is not enough (it sould work also on 
nodes, but as I said, it’s likely more safe to reinstall just to be really 
really sure:)
Simone, am I right about the restorecon for engine?

> 
> Cheers,
> 
> Cam
> 
> On Wed, May 11, 2016 at 2:14 PM, Michal Skrivanek 
> mailto:michal.skriva...@redhat.com>> wrote:
> 
> > On 11 May 2016, at 15:02, Cam Mac  > > wrote:
> >
> > Hi,
> >
> > In the oVirt guide, it says that "SELinux is being used by default on oVirt 
> > Node", but then goes on to say that if you have problems you should set it 
> > to permissive mode. I have had a few things fail due to being blocked by 
> > SELinux on a node I later enabled SELinux on, as it was off at install 
> > time. The other node which has had SELinux on from the start and so far has 
> > not had any oVirt operations blocked. I am guessing that the oVirt install 
> > process creates the necessary rules to allow vdsm to run under SELinux. So 
> > if you want to set SELinux to enforcing after installation, is there a 
> > script to do this, or is it better to just reinstall the node or engine, 
> > rather than trying to work out the individual exceptions?
> 
> For oVirt node it’s easier to reinstall it, it doesn’t persist much and it’s 
> the easies way how to get the labelling right
> 
> Thanks,
> michal
> 
> >
> > Thanks,
> >
> > Cam
> > ___
> > Users mailing list
> > Users@ovirt.org 
> > http://lists.ovirt.org/mailman/listinfo/users 
> > 
> 
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] SELinux and oVirt

[Cam Mac]

Thanks Michal, if reinstalling the engine, (which also had SELinux disabled
at install), would the best way be to backup the engine and then restore
just the ovirt config?

Cheers,

Cam

On Wed, May 11, 2016 at 2:14 PM, Michal Skrivanek <
michal.skriva...@redhat.com> wrote:

>
> > On 11 May 2016, at 15:02, Cam Mac  wrote:
> >
> > Hi,
> >
> > In the oVirt guide, it says that "SELinux is being used by default on
> oVirt Node", but then goes on to say that if you have problems you should
> set it to permissive mode. I have had a few things fail due to being
> blocked by SELinux on a node I later enabled SELinux on, as it was off at
> install time. The other node which has had SELinux on from the start and so
> far has not had any oVirt operations blocked. I am guessing that the oVirt
> install process creates the necessary rules to allow vdsm to run under
> SELinux. So if you want to set SELinux to enforcing after installation, is
> there a script to do this, or is it better to just reinstall the node or
> engine, rather than trying to work out the individual exceptions?
>
> For oVirt node it’s easier to reinstall it, it doesn’t persist much and
> it’s the easies way how to get the labelling right
>
> Thanks,
> michal
>
> >
> > Thanks,
> >
> > Cam
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Iso issue

[François DIOT]

Hello,

I just start using Ovirt one week ago and I want to install Ovirt in my company.

Currently all my VM are on VMware with two NFS storages. One for the iso and 
the other for all the software.

I started the setup following the Ovirt quick Start and I setup the Ovirt 
Engine on a Centos 6.7 and the Node on a Ovirt Node 3.6

I created and attached successfully a Data NFS Storage. I created a new ISO NFS 
Storage because I don't want to use the IS0_DOMAIN created during the setup.

When I running " # engine-iso-uploader list " I've got :

   [root@localhost ~]# engine-iso-uploader list
Please provide the REST API password for the admin@internal oVirt Engine user 
(CTRL+D to abort): 
ISO Storage Domain Name   | Datacenter| ISO Domain Status
ISO   | Default   | active

So I upload my images with " engine-iso-uploader upload -i ISO fedora.iso" 

[root@localhost Bureau]# engine-iso-uploader upload -i ISO fedora.iso
Please provide the REST API password for the admin@internal oVirt Engine user 
(CTRL+D to abort): 
Uploading, please wait...
INFO: Start uploading fedora.iso 
Uploading: [] 100%
INFO: fedora.iso uploaded successfully


I can see the image on the file /ISO/.../--/ but impossible to see 
them on the Manager administration portal when I select The Images Tab of my 
ISO Storage.

Do you have any ideas ? 
Thank you,

Francois 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] SELinux and oVirt

[Michal Skrivanek]

> On 11 May 2016, at 15:02, Cam Mac  wrote:
> 
> Hi,
> 
> In the oVirt guide, it says that "SELinux is being used by default on oVirt 
> Node", but then goes on to say that if you have problems you should set it to 
> permissive mode. I have had a few things fail due to being blocked by SELinux 
> on a node I later enabled SELinux on, as it was off at install time. The 
> other node which has had SELinux on from the start and so far has not had any 
> oVirt operations blocked. I am guessing that the oVirt install process 
> creates the necessary rules to allow vdsm to run under SELinux. So if you 
> want to set SELinux to enforcing after installation, is there a script to do 
> this, or is it better to just reinstall the node or engine, rather than 
> trying to work out the individual exceptions?

For oVirt node it’s easier to reinstall it, it doesn’t persist much and it’s 
the easies way how to get the labelling right

Thanks,
michal

> 
> Thanks,
> 
> Cam
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] SELinux and oVirt

[Cam Mac]

Hi,

In the oVirt guide, it says that "SELinux is being used by default on oVirt
Node", but then goes on to say that if you have problems you should set it
to permissive mode. I have had a few things fail due to being blocked by
SELinux on a node I later enabled SELinux on, as it was off at install
time. The other node which has had SELinux on from the start and so far has
not had any oVirt operations blocked. I am guessing that the oVirt install
process creates the necessary rules to allow vdsm to run under SELinux. So
if you want to set SELinux to enforcing after installation, is there a
script to do this, or is it better to just reinstall the node or engine,
rather than trying to work out the individual exceptions?

Thanks,

Cam
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Log4j hostname

[Ravi Nori]

Please also make sure that the hostname can be resolved.

Try running 'hostname' as unprivileged user to make sure the machine can
resolve the local host name.



On Wed, May 11, 2016 at 3:29 AM, Fabrice Bacchella <
fabrice.bacche...@orange.fr> wrote:

> You're showing a logstash parsing, extracted from a message formatted
> using syslog. All the magic should be in the pattern line
> (log4j.appender.myappender.layout.ConversionPattern=[%c] %m%).
> And logstash failed to parse the line anyway (see the _grokparsefailure).
>
> Did you try to send native log4j event to logstash, using custom appenders
> like my own : https://github.com/fbacchella/ZMQAppender
>
>
> > Le 11 mai 2016 à 08:20, Dominique Taffin  a
> écrit :
> >
> > Hello!
> >
> > Thank you for your reply. Unfortunately, it does not include the
> hostname with header=true.
> > The following is received by the logserver:
> >
> > {
> >   "_index": "ovirt-2016.05.11",
> >   "_type": "syslog",
> >   "_id": "AVSedM6EH9SU2r3j0ihk",
> >   "_score": null,
> >   "_source": {
> > "message":
> "<14>[org.ovirt.engine.core.vdsbroker.HostDevListByCapsVDSCommand] START,
> HostDevListByCapsVDSCommand(HostName = onodeXXX.some.domain,
> VdsIdAndVdsVDSCommandParametersBase:{runAsync='true',
> hostId='-XXX---XXX',
> vds='Host[onodeXXX.some.domain,-XXX---XXX]'}), log
> id: 689d5b30\n",
> > "@version": "1",
> > "@timestamp": "2016-05-11T08:15:35.729+02:00",
> > "type": "syslog",
> > "host": "10.XXX.XXX.XXX",
> > "tags": [
> >   "_grokparsefailure"
> > ],
> > "syslog_severity_code": 5,
> > "syslog_facility_code": 1,
> > "syslog_facility": "user-level",
> > "syslog_severity": "notice"
> >   },
> >   "sort": [
> > 1462947335729,
> > 1462947335729
> >   ]
> > }
> >
> > is it possible to have the IP in the "host" filed have resolved from
> log4j so that the hostname will be displayed there? Or have it convinced to
> use the appender.Application field?
> >
> > thank you and best,
> >  Dominique
> >
> > Von: Ravi Nori 
> > Gesendet: Dienstag, 10. Mai 2016 19:04
> > An: Dominique Taffin
> > Cc: users@oVirt.org
> > Betreff: Re: [ovirt-users] Log4j hostname
> >
> > Hi Dominique,
> >
> > Add
> >
> > log4j.appender.myappender.header = true
> >
> > and see if you get the hostname
> >
> > Ravi
> >
> >
> > On Mon, May 9, 2016 at 9:37 AM, Dominique Taffin <
> dominique.taf...@1und1.de> wrote:
> > Hello!
> >
> > We are using the log4j extension  to send ovirt logs to a logstash
> server.
> > As we do have several engine hosts and only one logging backend, we do
> need to filter logs by hostname. So far I am unable to provide a hostname in
> > Log4jLogger.properties. All Log4j configurations we have in other
> applications/servers to honor the log4j.Application property. I tried
> setting it up by:
> >
> >
> >
> > ovirt.engine.extension.name = Log4j
> > ovirt.engine.extension.provides =
> org.ovirt.engine.api.extensions.logger.Logger
> > ovirt.engine.extension.bindings.method = jbossmodule
> > ovirt.engine.extension.binding.jbossmodule.module =
> org.ovirt.engine-extensions.logger.log4j
> > ovirt.engine.extension.binding.jbossmodule.class =
> org.ovirt.engineextensions.logger.log4j.Log4jLogger
> > log4j.rootLogger=DEBUG, myappender
> >
> > log4j.appender.myappender = org.apache.log4j.net.SyslogAppender
> > log4j.appender.myappender.SyslogHost = logstash-server.something
> > log4j.appender.myappender.Port = 5544
> > log4j.appender.myappender.ReconnectionDelay = 6
> > log4j.appender.myappender.Application = ovirthostname
> > log4j.appender.myappender.LocationInfo = true
> > log4j.appender.myappender.Threshold = DEBUG
> > log4j.appender.myappender.layout = org.apache.log4j.PatternLayout
> > log4j.appender.myappender.layout.ConversionPattern=[%c] %m%n
> >
> >
> >
> > Logs do arrive, but no hostname. Can anyone point me out on how to
> include the hostname in the logs?
> >
> > thank you and best,
> >  Dominique
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Problems exporting VM's

[Nir Soffer]

On Sun, May 8, 2016 at 3:14 AM, Luciano Natale  wrote:
> Hi everyone. I've been having trouble when exporting VM's. I get error when
> moving image. I've created a whole new storage domain exclusive for this
> issue, and same thing happens. It's not always the same VM that fails, but
> once it fails on a certain storage domain, I cannot export it anymore.
> Please tell me which logs are relevant so i can post them and any other
> relevant iformation I can provide, and maybe someone can help me get through
> this problem.
>
> Ovirt version is 3.5.4.2-1.el6.

Please upgrade to latest 3.5 version, and report if this issue still
exists there.

Nir
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] vioscsi.sys BSOD with Win 7

[Cam Mac]

Hi Ladi,


>
> We will try just the win 7 drivers that shipped with 3.6.3 rather than the
> SHA-2 signed FC23 drivers and I'll get back to you. I have a question:
> if I try to build a Win2k12 server via WDS, I assume I will have to add
> the 2k12 drivers and then remove them again if I go to build a Win 7 VM
> as Win 7 will presumably try to pick up the 2k12 driver? Or can they
> co-exist?
> WDS has a build process whenever drivers are added (e.g., for KVM, VMWare
> etc) for available drivers. Do you know when the fix will be available?
>
>
Sorry for replying to my own post, but it turns out that there should be a
way in WDS to
set separate build directories for Win 7 and 2012, so please disregard that
question.

The build appears to be going well so far, no BSODs.

Thanks very much for the help Ladi!

Cheers,

Cam
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Problems exporting VM's

[Michal Skrivanek]

> On 10 May 2016, at 16:20, Luciano Natale  wrote:
> 
> Ok, here are the relevant vdsm logs!

it seems to be indeed storage-related problem. I could only find that the 
export task failed due to

106774fb-1093-495a-a996-48f48e066a6f::ERROR::2016-05-07 
18:04:15,998::blockVolume::429::Storage.Volume::(validateImagePath) Unexpected 
error
Traceback (most recent call last):
  File "/usr/share/vdsm/storage/blockVolume.py", line 427, in validateImagePath
os.mkdir(imageDir, 0o755)
OSError: [Errno 17] File exists: 
'/rhev/data-center/58aa23b5-9680-4ff2-991c-8f8952cfa13c/2a1cc76e-9ba2-4586-a612-049894467470/images/63e58057-00fd-4597-a258-64558d45c155’

Tal?

Thanks,
michal

> 
> Thanks!
> Luciano.
> 
> On Tue, May 10, 2016 at 5:46 AM, Michal Skrivanek 
> mailto:michal.skriva...@redhat.com>> wrote:
> 
>> On 09 May 2016, at 23:09, Luciano Natale > > wrote:
>> 
>> Ok, i've filtered out saturday. At midnight it  starts to backup 
>> automatically with a custom made script. At that run, I had trouble with vm 
>> named "operaciones-ad". Then i started working on the problem (among other 
>> things, i added a new backup storage domain) and you can se around 8 PM that 
>> another VM failed the backup, this one called "biblioteca". Other VM's i 
>> remeber failing where "NS1" and "NS2”.
> 
> Tal, can someone take a look and investigate why the task is failing?
> engine.log failure excerpt below
> 
> Luciano, I suppose vdsm.log from that time would help further
> 
> Thanks,
> michal
> 
> 2016-05-07 18:04:52,386 INFO  [org.ovirt.engine.core.bll.ExportVmCommand] 
> (org.ovirt.thread.pool-8-thread-15) [7a94a972] Running command: 
> ExportVmCommand internal: fals
> e. Entities affected :  ID: c9bddba0-c553-4a90-b97c-bdc1e88a333e Type: 
> StorageAction group IMPORT_EXPORT_VM with role type ADMIN
> 2016-05-07 18:04:52,388 INFO  
> [org.ovirt.engine.core.vdsbroker.SetVmStatusVDSCommand] 
> (org.ovirt.thread.pool-8-thread-15) [7a94a972] START, SetVmStatusVDSCommand( 
> vmId
> = 59e1be99-c37e-431d-9b4c-1d039fd667a7, status = ImageLocked, exit status = 
> Normal), log id: 7261d03c
> 2016-05-07 18:04:52,392 INFO  
> [org.ovirt.engine.core.vdsbroker.SetVmStatusVDSCommand] 
> (org.ovirt.thread.pool-8-thread-15) [7a94a972] FINISH, SetVmStatusVDSCommand, 
> log
> id: 7261d03c
> 2016-05-07 18:04:52,453 INFO  [org.ovirt.engine.core.bll.ExportVmCommand] 
> (org.ovirt.thread.pool-8-thread-15) [7a94a972] Lock freed to object 
> EngineLock [exclusiveLocks
> = key: 59e1be99-c37e-431d-9b4c-1d039fd667a7 value: VM
> 2016-05-07 18:04:52,465 INFO  
> [org.ovirt.engine.core.bll.CopyImageGroupCommand] 
> (org.ovirt.thread.pool-8-thread-15) [6f66db4a] Running command: 
> CopyImageGroupCommand in
> ternal: true. Entities affected :  ID: c9bddba0-c553-4a90-b97c-bdc1e88a333e 
> Type: Storage
> 2016-05-07 18:04:52,745 INFO  
> [org.ovirt.engine.core.vdsbroker.irsbroker.MoveImageGroupVDSCommand] 
> (org.ovirt.thread.pool-8-thread-15) [6f66db4a] START, MoveImageGroupV
> DSCommand( storagePoolId = 58aa23b5-9680-4ff2-991c-8f8952cfa13c, 
> ignoreFailoverLimit = false, storageDomainId = 
> 2a1cc76e-9ba2-4586-a612-049894467470, imageGroupId = 63e
> 58057-00fd-4597-a258-64558d45c155, dstDomainId = 
> c9bddba0-c553-4a90-b97c-bdc1e88a333e, vmId = 
> 59e1be99-c37e-431d-9b4c-1d039fd667a7, op = Copy, postZero = false, force =
>  true), log id: 781cc2f3
> 2016-05-07 18:04:53,135 INFO  
> [org.ovirt.engine.core.vdsbroker.irsbroker.MoveImageGroupVDSCommand] 
> (org.ovirt.thread.pool-8-thread-15) [6f66db4a] FINISH, MoveImageGroup
> VDSCommand, log id: 781cc2f3
> 2016-05-07 18:04:53,233 INFO  
> [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] 
> (org.ovirt.thread.pool-8-thread-15) [6f66db4a] CommandAsyncTask::Adding 
> CommandMultiAsy
> ncTasks object for command 1711f190-c188-419c-acc2-25edc8b8d1cf
> 2016-05-07 18:04:53,234 INFO  
> [org.ovirt.engine.core.bll.CommandMultiAsyncTasks] 
> (org.ovirt.thread.pool-8-thread-15) [6f66db4a] 
> CommandMultiAsyncTasks::AttachTask: Atta
> ching task 106774fb-1093-495a-a996-48f48e066a6f to command 
> 1711f190-c188-419c-acc2-25edc8b8d1cf.
> 2016-05-07 18:04:53,421 INFO  
> [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] 
> (org.ovirt.thread.pool-8-thread-15) [6f66db4a] Adding task 
> 106774fb-1093-495a-a996-48f4
> 8e066a6f (Parent Command ExportVm, Parameters Type 
> org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters), polling hasn't 
> started yet.
> 2016-05-07 18:04:54,164 INFO  
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
> (org.ovirt.thread.pool-8-thread-15) [6f66db4a] Correlation ID: 7a94a972, Job 
> ID: a312c127-45ef-44b4-8bee-b36fe7f251ee, Call Stack: null, Custom Event ID: 
> -1, Message: Starting export Vm operaciones-ad to vms-backups
> 2016-05-07 18:04:54,166 INFO  [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] 
> (org.ovirt.thread.pool-8-thread-15) [6f66db4a] 
> BaseAsyncTask::startPollingTask: Starting to poll task 
> 106774fb-1093-495a-a996-48f48e0

[ovirt-users] ovirt-guest-agent builds for Ubuntu 16.04 have been released

[Vinzenz Feenstra]

Hello oVirt Users,

I would like to announce the release of the Ubuntu 16.04 builds for the 
ovirt-guest-agent - Please be so kind and try them on your systems if you run 
into any issues with them and feel free to report issues with those.

The repository URL is here:

http://download.opensuse.org/repositories/home:/evilissimo:/ubuntu:/16.04/xUbuntu_16.04/
 


You can add it to your sources.list by adding a line like this:

deb 
http://download.opensuse.org/repositories/home:/evilissimo:/ubuntu:/16.04/xUbuntu_16.04/
 

 / 

The release key can be found here: 
http://download.opensuse.org/repositories/home:/evilissimo:/ubuntu:/16.04/xUbuntu_16.04/Release.key

And can be imported like this:

# wget 
http://download.opensuse.org/repositories/home:/evilissimo:/ubuntu:/16.04/xUbuntu_16.04/Release.key
# apt-key add - < Release.key

To install the agent:

# apt-get update
# apt-get install ovirt-guest-agent
# systemctl enable ovirt-guest-agent
# systemctl start ovirt-guest-agent


Regards,
Vinzenz ‘evilissimo’ Feenstra___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] vioscsi.sys BSOD with Win 7

[Cam Mac]

>
>
> > do you know if the upstream virtio drivers are correctly signed?
> > In particular:
> >
> http://resources.ovirt.org/pub/ovirt-3.6/rpm/el6/noarch/ovirt-guest-tools-iso-3.6-3.fc23.noarch.rpm
>
> This is one of the first builds signed only with the new SHA-2 based
> certificate which is not supported on Windows 7 out-of-the-box.
> Installing a hotfix per:
>
> https://technet.microsoft.com/en-us/library/security/3033929.aspx
>
> will fix it.
>
>
Thanks Ladi.


> > If yes, any idea what can be the issue Cam faces?
>
> As for the original BSOD, the problem there was trying to load Win8
> vioscsi.sys on Win7 and should be fixed by pointing Windows to the
> Win7 subdirectory like you wrote.
>
> Relevant bugs:
>
> https://bugzilla.redhat.com/show_bug.cgi?id=1289406 (signing issue)
> https://bugzilla.redhat.com/show_bug.cgi?id=1296633 (target OS version
> mismatch)
>
>
The crash mentions vioscsi.sys, not viostor.sys, which the second bug
report mentioned. The other thing
is that the crash happens after the install, upon first reboot. The
contents of the Windows guest tools ISO
are copied to the Windows Deployment server from where they are installed.

When I try an alternative install using a Win 7 ISO, rather than PXE boot,
it fails at a different point. This is using
the oVirt Windows guest tools ISO that is in the 3.6.3 repos. When it comes
to installing to disk, I change the CD
to the guest tools ISO and browse to the win7 drivers
(ovirt-tools-setup/drivers/virtio/viostor/w7/amd64/, which has
the viostor drivers), but then the installer complains it cannot install on
the disk, even though it can successfully
create partitons on it (see attached screenshot).

Thanks,

Cam


>
> > - Original Message -
> >> From: "Arman Khalatyan" 
> >> To: "Cam Mac" 
> >> Cc: "Tomas Jelinek" , "users" 
> >> Sent: Tuesday, May 10, 2016 9:19:49 PM
> >> Subject: Re: [ovirt-users] vioscsi.sys BSOD with Win 7
> >>
> >> Same bsod was with win2008 server, in order to fix it we changed nics to
> >> e1000 and disks to IDE. Now it boots w/o trouble.
> >> Am 10.05.2016 7:43 nachm. schrieb "Cam Mac" :
> >>
> >> > Hi Tomas,
> >> >
> >> > The install went ok, but Windows complains:
> >> >
> >> > "File: \windows\system32\drivers\vioscsi.sys
> >> > status: 0xc428
> >> > Windows cannot verify the digital signature for this file"
> >> >
> >> > Regards,
> >> >
> >> > Campbell
> >> >
> >> > On Tue, May 10, 2016 at 6:29 PM, Cam Mac  wrote:
> >> >
> >> >> Hi Tomas,
> >> >>
> >> >> Thanks, I will test that later tonight and let you know.
> >> >>
> >> >> Regards,
> >> >>
> >> >> Cam
> >> >>
> >> >> On Tue, May 10, 2016 at 3:28 PM, Tomas Jelinek 
> >> >> wrote:
> >> >>
> >> >>> Hi,
> >> >>>
> >> >>> please try to install this guest tools:
> >> >>>
> >> >>>
> http://resources.ovirt.org/pub/ovirt-3.6/rpm/el6/noarch/ovirt-guest-tools-iso-3.6-3.fc23.noarch.rpm
> >> >>>
> >> >>> Also please make sure you point windows to the correct driver in the
> >> >>> sub-directory for w7
> >> >>>
> >> >>> Tomas
> >> >>>
> >> >>> - Original Message -
> >> >>> > From: "Cam Mac" 
> >> >>> > To: users@ovirt.org
> >> >>> > Sent: Monday, May 9, 2016 7:28:57 PM
> >> >>> > Subject: [ovirt-users] vioscsi.sys BSOD with Win 7
> >> >>> >
> >> >>> > Hi,
> >> >>> >
> >> >>> > I'm running oVirt 3.6.3.4-1.el7.centos and when I install a Win 7
> >> >>> guest VM,
> >> >>> > using VirtIO disk, networking etc, it goes through the install
> process
> >> >>> ok,
> >> >>> > but blue screens upon boot with a vioscsi.sys error (attached). I
> have
> >> >>> tried
> >> >>> > the official version ovirt-guest-tools-iso 3.6.0 0.2_master.fc22,
> as
> >> >>> well as
> >> >>> > some earlier and later versions. I am using a PXE boot method
> with a
> >> >>> Windows
> >> >>> > deployment server, which has the drivers from the oVirt tools ISO
> >> >>> installed
> >> >>> > (indeed, it picks up the drive and networking and I can see it
> >> >>> installing
> >> >>> > the drivers). I have tried with the generic IDE and rtl8139
> config on
> >> >>> the
> >> >>> > guest, and it also fails with the same vioscsi.sys error after
> >> >>> rebooting
> >> >>> > upon finishing installation even though I'm using IDE as the disk
> >> >>> driver.
> >> >>> >
> >> >>> > I have uploaded a win 7 x64 ISO and tried installing that, and it
> >> >>> loads the
> >> >>> > VirtIO viostor driver (using the method at:
> >> >>> >
> >> >>>
> https://www.ovirt.org/documentation/how-to/virtual-machines/create-a-windows-7-virtual-machine/
> >> >>> > ), and even manages to partition the disks, but fails to install
> on
> >> >>> the disk
> >> >>> > (screenshot attached).
> >> >>> >
> >> >>> > I've tried temporarily removing the vioscsi files from the install
> >> >>> server as
> >> >>> > a last resort, but as expected it fails to install properly,
> though I
> >> >>> > thought it used the viostor driver instead.
> >> >>> >
> >> >>> > Thanks for any help.
> >> >>> >
> >> >>> > Regards,
> >> >>> >
> >> >>> > Cam
> >

Re: [ovirt-users] Log4j hostname

[Fabrice Bacchella]

You're showing a logstash parsing, extracted from a message formatted using 
syslog. All the magic should be in the pattern line 
(log4j.appender.myappender.layout.ConversionPattern=[%c] %m%).
And logstash failed to parse the line anyway (see the _grokparsefailure).

Did you try to send native log4j event to logstash, using custom appenders like 
my own : https://github.com/fbacchella/ZMQAppender


> Le 11 mai 2016 à 08:20, Dominique Taffin  a écrit :
> 
> Hello!
> 
> Thank you for your reply. Unfortunately, it does not include the hostname 
> with header=true.
> The following is received by the logserver:
> 
> {
>   "_index": "ovirt-2016.05.11",
>   "_type": "syslog",
>   "_id": "AVSedM6EH9SU2r3j0ihk",
>   "_score": null,
>   "_source": {
> "message": 
> "<14>[org.ovirt.engine.core.vdsbroker.HostDevListByCapsVDSCommand] START, 
> HostDevListByCapsVDSCommand(HostName = onodeXXX.some.domain, 
> VdsIdAndVdsVDSCommandParametersBase:{runAsync='true', 
> hostId='-XXX---XXX', 
> vds='Host[onodeXXX.some.domain,-XXX---XXX]'}), log 
> id: 689d5b30\n",
> "@version": "1",
> "@timestamp": "2016-05-11T08:15:35.729+02:00",
> "type": "syslog",
> "host": "10.XXX.XXX.XXX",
> "tags": [
>   "_grokparsefailure"
> ],
> "syslog_severity_code": 5,
> "syslog_facility_code": 1,
> "syslog_facility": "user-level",
> "syslog_severity": "notice"
>   },
>   "sort": [
> 1462947335729,
> 1462947335729
>   ]
> }
> 
> is it possible to have the IP in the "host" filed have resolved from log4j so 
> that the hostname will be displayed there? Or have it convinced to use the 
> appender.Application field?
> 
> thank you and best,
>  Dominique
> 
> Von: Ravi Nori 
> Gesendet: Dienstag, 10. Mai 2016 19:04
> An: Dominique Taffin
> Cc: users@oVirt.org
> Betreff: Re: [ovirt-users] Log4j hostname
>  
> Hi Dominique,
> 
> Add
> 
> log4j.appender.myappender.header = true
> 
> and see if you get the hostname
> 
> Ravi
> 
> 
> On Mon, May 9, 2016 at 9:37 AM, Dominique Taffin  
> wrote:
> Hello!
> 
> We are using the log4j extension  to send ovirt logs to a logstash server. 
> As we do have several engine hosts and only one logging backend, we do need 
> to filter logs by hostname. So far I am unable to provide a hostname in
> Log4jLogger.properties. All Log4j configurations we have in other 
> applications/servers to honor the log4j.Application property. I tried setting 
> it up by:
> 
> 
> 
> ovirt.engine.extension.name = Log4j
> ovirt.engine.extension.provides = 
> org.ovirt.engine.api.extensions.logger.Logger
> ovirt.engine.extension.bindings.method = jbossmodule
> ovirt.engine.extension.binding.jbossmodule.module = 
> org.ovirt.engine-extensions.logger.log4j
> ovirt.engine.extension.binding.jbossmodule.class = 
> org.ovirt.engineextensions.logger.log4j.Log4jLogger
> log4j.rootLogger=DEBUG, myappender
> 
> log4j.appender.myappender = org.apache.log4j.net.SyslogAppender
> log4j.appender.myappender.SyslogHost = logstash-server.something
> log4j.appender.myappender.Port = 5544
> log4j.appender.myappender.ReconnectionDelay = 6
> log4j.appender.myappender.Application = ovirthostname
> log4j.appender.myappender.LocationInfo = true
> log4j.appender.myappender.Threshold = DEBUG
> log4j.appender.myappender.layout = org.apache.log4j.PatternLayout
> log4j.appender.myappender.layout.ConversionPattern=[%c] %m%n
> 
> 
> 
> Logs do arrive, but no hostname. Can anyone point me out on how to include 
> the hostname in the logs?
> 
> thank you and best,
>  Dominique
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Exclamation mark on Windows guests Ovirt 3.6.5

[Tomas Jelinek]

Hi Darryl,

do you have an ovirt guest agent installed on your guests? If yes, could you 
please check in webadmin
in VM main tab -> pick your VM which show this exclamation mark -> guest info 
subtab -> what is in "type" part?

Thanx,
Tomas

- Original Message -
> From: "Darryl Bond" 
> To: "users" 
> Sent: Wednesday, May 11, 2016 1:31:42 AM
> Subject: [ovirt-users] Exclamation mark on Windows guests Ovirt 3.6.5
> 
> Why do all my windows guests display an exclamation mark with the message
> 'Actual operating system type differs from the configuration' They don't.
> 
> There is a variety of Windows OS installed from XP to Server 2102 all
> configured correctly.
> 
> My linux VM's don't have an exclamation mark
> 
> 
> I installed the QEMU guest tools on an XP guest. No difference.
> 
> vdsClient -s 0 getVmStats  show no obvious difference between the
> Windows and linux guests.
> 
> 
> 
> Regards
> 
> Darryl
> 
> ?
> 
> 
> 
> 
> The contents of this electronic message and any attachments are intended only
> for the addressee and may contain legally privileged, personal, sensitive or
> confidential information. If you are not the intended addressee, and have
> received this email, any transmission, distribution, downloading, printing
> or photocopying of the contents of this message or attachments is strictly
> prohibited. Any legal privilege or confidentiality attached to this message
> and attachments is not waived, lost or destroyed by reason of delivery to
> any person other than intended addressee. If you have received this message
> and are not the intended addressee you should notify the sender by return
> email and destroy all copies of the message and any attachments. Unless
> expressly attributed, the views expressed in this email do not necessarily
> represent the views of the company.
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users