On Wed, Dec 14, 2016 at 9:02 AM, TranceWorldLogic .
wrote:
> Hi,
>
> I was trying to explore more about fencing option supported in ovirt.
> But getting lost in documents.
>
> My requirement is to fence at VM level rather than host level.
I am pretty certain that this is not called fencing. Fenci
Hi,
I was trying to explore more about fencing option supported in ovirt.
But getting lost in documents.
My requirement is to fence at VM level rather than host level.
e.g let assume VM1.1, VM1.2,VM1.3 are running on host1 and VM2.1,VM2.2
VM2.3 running on host2. Suppose due to some error only VM1
[+ gluster-users]
Could you be more specific about error?
On Wed, Dec 14, 2016 at 1:50 AM, lejeczek wrote:
> libvirt/qemu does not get to gluster vols when one has these:
>
> Upgraded:
> glusterfs.x86_64 3.7.17-1.el7 glusterfs-api.x86_64
> 3.7.17-1.el7
> glusterfs-cli.x86_6
Good that you make it work.
AFAIK in Active Directory is very rarely used anonymous bind, so you should
always use the username/password configuration in your properties files.
Or properly setup the anonymous bind, because according to logs there
are some ldap attributes with strange values.
The
I was actually able to resolve this by renaming the corresponding files in the
/etc/pki/ovirt-engine/aaa directory and the extentions.d directory. Then, I
simply ran the ovirt-engine-extension-aaa-ldap-setup command and re-added the
AD back. The users were not affected since they were already in
libvirt/qemu does not get to gluster vols when one has these:
Upgraded:
glusterfs.x86_64 3.7.17-1.el7
glusterfs-api.x86_64 3.7.17-1.el7
glusterfs-cli.x86_64 3.7.17-1.el7
glusterfs-client-xlators.x86_64 3.7.17-1.el7
glusterfs-fuse.x86_64 3.7.17-1.el7
glusterfs-ganesha.x86_
Sorry, forgot the version: 4.0.5.5-1.el7.centos
On Tue, Dec 13, 2016 at 5:37 PM, cmc wrote:
> On the VM in the list of VMs, by right-clicking on it. It then gives
> you a pop up window to edit the VM, starting in the 'General' section
> (much as when you create a new one)
>
> Thanks,
>
> Cam
>
>
On the VM in the list of VMs, by right-clicking on it. It then gives
you a pop up window to edit the VM, starting in the 'General' section
(much as when you create a new one)
Thanks,
Cam
On Tue, Dec 13, 2016 at 5:04 PM, Fred Rolland wrote:
> Hi,
>
> Which version are you using ?
> When you ment
On Tue, Dec 13, 2016 at 1:56 PM, Paolo Bonzini wrote:
>
>
> On 13/12/2016 12:38, Gianluca Cecchi wrote:
> > flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
> > pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> > rdtscp lm constant_tsc arch_perfmon
Hi,
Which version are you using ?
When you mention "Edit", on which entity is it performed.?
The disks are currently not part of the edit VM window.
Thanks,
Freddy
On Tue, Dec 13, 2016 at 6:06 PM, cmc wrote:
> This VM wasn't running.
>
> On Tue, Dec 13, 2016 at 4:02 PM, Elad Ben Aharon
> wr
No. The problem is not solved. I still can not import OVA in oVirt.
And the problem is not a lack of disk space.
13.12.2016, 18:58, "Derek Atkins" :
> Hi,
>
> aleksey.maksi...@it-kb.ru writes:
>
>> # LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova
>> /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null
This VM wasn't running.
On Tue, Dec 13, 2016 at 4:02 PM, Elad Ben Aharon wrote:
> In general, in order to delete a disk while it is attached to a running VM,
> the disk has to be deactivated (hotunplugged) first so it won't be
> accessible for read and write from the VM.
> In the 'edit' VM prompt
In general, in order to delete a disk while it is attached to a running VM,
the disk has to be deactivated (hotunplugged) first so it won't be
accessible for read and write from the VM.
In the 'edit' VM prompt there is no option to deactivate the disk, it
should be done from the disks subtab under
Hi,
aleksey.maksi...@it-kb.ru writes:
> # LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova
> /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null
>
>
> fsync /dev/sda
> guestfsd: main_loop: proc 282 (internal_autosync) took 0.01 seconds
> libguestfs: trace: internal_autosync = 0
> libguestfs: sendin
Hi,
As I was going through my daily logwatch I noticed that a package got
updated on my ovirt host last night. But I know that I didn't do that
on my own. Looking at the logs I tracked it down to the hosted engine
running a VdsDeploy process which updated the package on the host. I
know from th
Whups, bad reply to, no problem copying the list.
It's a self hosted system, currently with two clusters and 9 active hosts.74
VMs, yes. It’s had a few more clusters over time, and a few more hosts,
including some removed and re-added when upgrading from centos 6 to 7. But only
9 at the moment.
Actually, I just tried to create a new disk via the 'Edit' menu once
I'd deleted it from the 'Disks' tab, and it threw an exception.
Attached is the console log.
On Tue, Dec 13, 2016 at 3:24 PM, cmc wrote:
> Hi Elad,
>
> I was trying to delete the disk via the 'edit' menu, but noticed just
> now
Hi Elad,
I was trying to delete the disk via the 'edit' menu, but noticed just
now that there was a 'disks' tab when the machine was highlighted.
This has a 'activate/deactivate' function, and once deactivated, was
able to remove it without error.
It does offer the option of deleting the disk whe
thanks a lot for your help!
2016-12-13 12:07 GMT-03:00 Yedidyah Bar David :
> On Tue, Dec 13, 2016 at 4:58 PM, Juan Pablo
> wrote:
> > thanks for pointing me on the right direction , I have this line a
> couple of
> > minutes before the vm restart
> > ":states::128::ovirt_hosted_engine_ha.agent
On Tue, Dec 13, 2016 at 4:58 PM, Juan Pablo wrote:
> thanks for pointing me on the right direction , I have this line a couple of
> minutes before the vm restart
> ":states::128::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(score)
> Penalizing score by 1600 due to gateway status"
> so
thanks for pointing me on the right direction , I have this line a couple
of minutes before the vm restart
":states::128::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(score)
Penalizing score by 1600 due to gateway status"
so looks like this is causing:
states::413::ovirt_hosted_engine_
On 12/13/2016 03:36 PM, TranceWorldLogic . wrote:
> Hi,
>
> I had install ovirt relase 40 .
>
> Now I want to write a python script to interact with VDSM.
> Can some one point me to a tutorial guide for ovirtsdk4 ?
> [Document, tutorial, blog ...]
>
> I tried google search but not got good refer
On Tue, Dec 13, 2016 at 4:34 PM, Juan Pablo wrote:
> Hi guys,
> I have ovirt 4.0.5 with 3 hosts and 1 storage setup, using iscsi for data
> and nfs for hosted engine storage.
> storage network is on a private vlan.
> sometimes I see ETL service stopped / ETL service started in the events log,
> si
Hi,
I had install ovirt relase 40 .
Now I want to write a python script to interact with VDSM.
Can some one point me to a tutorial guide for ovirtsdk4 ?
[Document, tutorial, blog ...]
I tried google search but not got good reference.
Thanks,
~Rohit
__
Hi Martin,
I am sorry, I am trying installing ovirt on my VM OS (cntos).
And here I had 2 VMs Centos 7 and 6. And I had played around some
configuration in both VM and hence it was failing.
I forgot what I had executed in that VM.
Anyway, after fresh installation. I am able to setup ovirt-engine.
Hi guys,
I have ovirt 4.0.5 with 3 hosts and 1 storage setup, using iscsi for data
and nfs for hosted engine storage.
storage network is on a private vlan.
sometimes I see ETL service stopped / ETL service started in the events
log, side by side with a hosted engine stop/start...
also, sometimes I
On Tue, Dec 13, 2016 at 4:10 PM, TranceWorldLogic .
wrote:
> Hi Martin,
>
> I tried on centos 7.
> And got same error as mention in last mail steps:
> --- output ---
> # engine-setup
> [ INFO ] Stage: Initializing
> [ INFO ] Stage: Environment setup
> Configuration files:
> ['/etc/ovir
Hi Martin,
I tried on centos 7.
And got same error as mention in last mail steps:
--- output ---
# engine-setup
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
Configuration files:
['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf',
'/etc/ovirt-engine-setup.conf.d
On Tue, Dec 13, 2016 at 2:51 PM, TranceWorldLogic . <
tranceworldlo...@gmail.com> wrote:
> Hi,
>
> I want to confirm one doubt. I face issue with engine datatbase hence I
> had executed step 1 and 2.
> On centos 7 I need not to execute those right ?
>
You need to perform exactly those steps I wr
On Tue, Dec 13, 2016 at 3:51 PM, TranceWorldLogic .
wrote:
> Hi,
>
> I want to confirm one doubt. I face issue with engine datatbase hence I had
> executed step 1 and 2.
> On centos 7 I need not to execute those right ?
Right. engine-setup can do everything for you.
To start from scratch you can
Hi,
I want to confirm one doubt. I face issue with engine datatbase hence I had
executed step 1 and 2.
On centos 7 I need not to execute those right ?
Thanks,
~Rohit
On Tue, Dec 13, 2016 at 7:12 PM, Martin Perina wrote:
> Hi,
>
> for basic default installation of oVirt 4 you need to perform fo
Hi,
for basic default installation of oVirt 4 you need to perform following
steps on Centos/RHEL 7 host:
# yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm
# yum install ovirt-engine
# engine-setup
Martin Perina
On Tue, Dec 13, 2016 at 2:38 PM, TranceWorldLogic .
Thanks for information.
Would I get to know setup procedure ?
On Tue, Dec 13, 2016 at 7:05 PM, Martin Perina wrote:
> Hi,
>
> only Centos/RHEL 7 is supported for oVirt 4. Please take a look at [1] for
> correct installation steps on EL7.
>
> Thanks
>
> Martin Perina
>
> [1] http://www.ovirt.org
Hi,
only Centos/RHEL 7 is supported for oVirt 4. Please take a look at [1] for
correct installation steps on EL7.
Thanks
Martin Perina
[1] http://www.ovirt.org/release/4.0.5/
On Tue, Dec 13, 2016 at 2:30 PM, Juan Pablo
wrote:
> why are you still using centos 6? IIRC centos 6 is not supporte
why are you still using centos 6? IIRC centos 6 is not supported anymore as
vdsm related problems.
you have manual here :
http://www.ovirt.org/documentation/quickstart/quickstart-guide/
you can use guidance from
http://www.ovirt.org/blog/2016/08/up-and-running-with-ovirt-4-0-and-gluster-storage/
t
On 13/12/2016 12:38, Gianluca Cecchi wrote:
> flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
> rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology
> nonstop_tsc aperfmperf eagerfp
There is no indication for image deletion in engine.log
The browser console log is located in your browser under
'settings'->'developer'.
Please try to delete a disk as you tried before, get the console log and
provide it.
Thanks
On Mon, Dec 12, 2016 at 7:40 PM, cmc wrote:
> Hi Eled,
>
> I've a
On Tue, Dec 13, 2016 at 12:29 PM, Paolo Bonzini wrote:
>
>
> On 12/12/2016 15:06, Sandro Bonazzola wrote:
> >
> > Hello,
> > where to find details about this info?
> > I ask because on my tests in a nested environment with 4.1 beta on
> > CentOS 7.2 + CR (that should match upcomin
On 12/12/2016 15:06, Sandro Bonazzola wrote:
>
> Hello,
> where to find details about this info?
> I ask because on my tests in a nested environment with 4.1 beta on
> CentOS 7.2 + CR (that should match upcoming 7.3) I was not able to
> power on the SHE VM using qemu-kvm-ev-2
Engine - oVirt Engine Version: 4.0.5.5-1.el7.centos (CentOS 7.2)All Hosts:OS Version:RHEL - 7 - 2.1511.el7.centos.2.10OS Description:CentOS Linux 7 (Core)Kernel Version:3.10.0 - 327.36.3.el7.x86_64KVM Version:2.3.0 - 31.el7.16.1LIBVIRT Version:libvirt-2.0.0-10.el7_3.2VDSM Version:vdsm-4.18.15.3-1.e
On Tue, Dec 13, 2016 at 10:30 AM, Ralf Schenk wrote:
> Hello
>
> by browsing the repository on http://mirror.centos.org/
> centos/7/virt/x86_64/kvm-common/ I can't see any qemu-kvm-ev-2.6.* RPM.
>
> I think this will break if I update the Ovirt-Hosts...
>
Agreed. Just checked what's going on, fro
version of Engine and Host and virt-v2v (which is running on your host)
and are you running on Fedora, Centos ext?
On Tue, Dec 13, 2016 at 12:08 PM, wrote:
> 1. No. This is an unacceptable option for me
> 2. No. This is my first experience
> 3. Versions where? On Engine or on Host ?
> 4. Yes.
>
1. No. This is an unacceptable option for me2. No. This is my first experience3. Versions where? On Engine or on Host ?4. Yes. 13.12.2016, 13:03, "Shahar Havivi" :Thanks you,Several questions:1. did you try to import the disk target as preallocate?2. did you try to import other ova files?3. can yo
Thanks you,
Several questions:
1. did you try to import the disk target as preallocate?
2. did you try to import other ova files?
3. can you please send us version of virt-v2v, vdsm and engine and the os
that you are running with.
4. Is it possible for you to share the ova file?
Thank you,
Shahar
On Tue, Dec 13, 2016 at 11:05 AM, Koen Vanoppen wrote:
> Thanks! The answer file I'm using is from 4.0... So, it's kinda strange he
> quits on the Localhost database for DWH.
OK, sorry for not checking the file earlier.
Perhaps you are using for a new setup, an answer file generated by an upgrad
Hello
by browsing the repository on
http://mirror.centos.org/centos/7/virt/x86_64/kvm-common/ I can't see
any qemu-kvm-ev-2.6.* RPM.
I think this will break if I update the Ovirt-Hosts...
[root@microcloud21 yum.repos.d]# yum check-update | grep libvirt
libvirt.x86_64 2.0
Thanks! The answer file I'm using is from 4.0... So, it's kinda strange he
quits on the Localhost database for DWH.
I'll check the otopi option.
Kind regards,
Koen
On Tue, 13 Dec 2016 at 09:47 Yedidyah Bar David wrote:
On Tue, Dec 13, 2016 at 8:36 AM, Koen Vanoppen
wrote:
> Dear all,
>
> I'm
On Tue, Dec 13, 2016 at 8:36 AM, Koen Vanoppen wrote:
> Dear all,
>
> I'm currently trying to create a puppet module for setting up ovirt from
> scratch.
> For the moment I'm stuck with the answer file that hangs on this (and then
> of course stops the installation):
>
> Notice: /Stage[main]/Bacov
Thank you,
We need the vdsm log as well please - its the host that you try to import
the ova from under /var/log/vdsm/vdsm.log
Shahar.
On Tue, Dec 13, 2016 at 9:58 AM, wrote:
> Log attached
>
> 13.12.2016, 10:04, "Shahar Havivi" :
>
> Please attach the log and will see what the error is.
>
> O
Hi,
could you please execute following command to get full logs from login flow
and share those logs?
ovirt-engine-extensions-tool --log-level=FINEST aaa login-user
--profile= --user-name=
Please replace and according to your setup.
Thanks
Martin Perina
On Tue, Dec 13, 2016 at 9:03 AM, B
Hello,
Getting this and have no idea where to begin:
server_error: Unexpected comma or semicolon found at the end of the DN string.
Server is set up with AD for authentication. The problem started after
attempting to change SSL certificates with our own however, that failed so we
rolled back.
51 matches
Mail list logo
