On Wed, May 23, 2018 at 12:10 PM, 03CE 007 <03ce...@gmail.com> wrote:
> Hello Ondra,
> you're correct, there was much accept removing 'connection: local' line
> from ovirt ansible roles.
>
> however, the example playbook to deploy new vm fails at template option
> and it complains that i don't hav
Hi,
I've updated again to the latest version, but there are no changes. All of
bricks on my first node are down in the GUI (in console are ok)
An Interesting thing, the "Self-Heal info" column show "OK" for all hosts and
all bricks, but "Space used" column is zero for all hosts/bricks.
Can I
My engine is upgraded and running 4.2.3. I am testing out upgrading my first
local storage node. I installed the 4.2 release repo and ran a yum update. I
had to manually install the following packages form CentOS (yum install udisks2
lshw iotop libvirt-daemon-config-network virt-install python-p
> This is true -- I have to bring everything down when I want to upgrade the
> system, especially the host itself. So I don't upgrade as often as I might
> if I had multiple hosts where I could migrate.
>
> How can you do it without a second host and importing with a temporary
> storage domain?
Hi,
Aziz writes:
> Hi all,
>
> I am able to access my VMs from LAN using remote Viewer, however this is not
> working from outside LAN, my setup is as follow:
>
> 1. Controller in a separate HW machine
> 2. Host in a server
>
> When checking the console.vv file, I see that it includes the loca
Hi,
Justin Zygmont writes:
> -Original Message-
> From: Derek Atkins [mailto:warl...@mit.edu]
> Sent: Monday, May 21, 2018 8:33 AM
> To: Simone Tiraboschi
> Cc: users ; ov...@fateknollogee.com
> Subject: [ovirt-users] Re: oVirt: single host install
>
> Hi,
>
> Simone Tiraboschi writes
On 5/23/2018 7:57 AM, Sandro Bonazzola wrote:
Please note that to fully mitigate this vulnerability, system
administrators must apply both hardware “microcode” updates and
software patches that enable new functionality.
At this time, microprocessor microcode will be delivered by the
indivi
On Wed, May 23, 2018 at 4:39 PM, <03ce...@gmail.com> wrote:
> I have self-hosted-engine (4.2) deployed successfully on cento (7.4)
> server.
>
> The physical server has 'ovirt' as hostname and the self-hosted engineVM
> deployed and running on it has 'engine.ovirt' as fdqn.
>
> I want to deploy an
Den 23 maj 2018 16:05 skrev William Dossett :Hi Jayme, thanks for the info… yes I’ve been googling and googling… I run a few VMware VSANs at the moment so HCI is my specialty … even one in my basement going to upgrade that to all flash soon as the 2TB disks are getting cheaper! A question more t
As you may have already heard, an industry-wide issue was found in the way
many modern microprocessor designs have implemented speculative execution
of Load & Store instructions.
This issue is well described by CVE-2018-3639 announce available at
https://access.redhat.com/security/cve/cve-2018-3639
On Wed, May 23, 2018 at 3:24 PM, Sakhi Hadebe wrote:
> Hi,
>
> I am new to ansible and tring to deploy an ovrt cluster with gluster. I am
> following this documentation https://www.ovirt.org/blog/2018/02/up-and-
> running-with-ovirt-4-2-and-gluster-storage/, although the screenshots are
> not exa
I have self-hosted-engine (4.2) deployed successfully on cento (7.4) server.
The physical server has 'ovirt' as hostname and the self-hosted engineVM
deployed
and running on it has 'engine.ovirt' as fdqn.
I can successfully create new VM using the oVirt.vm-infra example playbook. But
what othe
I have self-hosted-engine (4.2) deployed successfully on cento (7.4) server.
The physical server has 'ovirt' as hostname and the self-hosted engineVM
deployed and running on it has 'engine.ovirt' as fdqn.
I want to deploy another host on engineVM and I am using pre-baked oVirt.Infra
role examp
I'd be interested in what you guys come up with.
I've had the same questions regarding RAID (or non-raid) & hardware.
I wish there was some handy guide to follow.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.
For hosted engine setup:
- are you assigning your engine dhcp or static IP address?
- for the admin password, is your password complex (with special characters) or
simple (upper & lowercase letters only)?
___
Users mailing list -- users@ovirt.org
To uns
hiI deploy ovirt-engine-4.2.2 hosted-engine by #hosted-engine --deploy, but
face some error bridge ovirtmgmt is not configure, i should how to do? thanks
[ INFO ] TASK [Get ovirtmgmt route table id][ ERROR ] fatal: [localhost]:
FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list |
Hi Jayme, thanks for the info… yes I’ve been googling and googling… I run a few
VMware VSANs at the moment so HCI is my specialty … even one in my basement 😊
going to upgrade that to all flash soon as the 2TB disks are getting cheaper!
I tried doing this a couple of years back as my post s
Interesting, Looking in this log I see a large number of checks being
done unrelated to updating the system. When I initiated the update
process with the host in maintenance mode I would see just a couple of
lines about start/finish repo checks being performed. That was it.
After seeing that
Hi,
I am new to ansible and tring to deploy an ovrt cluster with gluster. I am
following this documentation
https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/,
although the screenshots are not exactly the same. Gluster successfully
deployed.
Below is what is in
Hello!
On Tue, May 22, 2018 at 11:10 AM, Demeter Tibor wrote:
>
> Is there any changes with this bug?
>
> Still I haven't finish my upgrade process that i've started on 9th may:(
>
> Please help me if you can.
>
>
Looks like all required patches are already merged, so could you please to
update
Ovirt Community,
First off: thank you - these emails have helped me to get Ovirt running. I
barely know what I am doing but learning quickly.
I am trying to do a network separation and confusing myself. I have two
physical networks (10.10.x.x/16 and 192.168.1.x/24) my ovirt management is
bridg
Unfortunately there is not a lot of info out there about ideal hardware
configs for hyperconverged oVirt (at least not that I have found to date,
and believe me I've looked). If you have enough drives and especially if
they are spinning disks as far as I know your best option would likely be
to do
Must all 7 hosts have the same amount of storage/number of disks?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Sorry, previous e-mail went truncated...
On Tue, May 22, 2018 at 11:49 PM, Nir Soffer wrote:
> On Fri, May 11, 2018 at 2:59 PM Gianluca Cecchi
> wrote:
>
>> Hello,
>> I had an error during live storage migration of a disk.
>> The destination image was created but the process was not completed,
On Tue, May 22, 2018 at 11:49 PM, Nir Soffer wrote:
> On Fri, May 11, 2018 at 2:59 PM Gianluca Cecchi
> wrote:
>
>> Hello,
>> I had an error during live storage migration of a disk.
>> The destination image was created but the process was not completed,
>> because of a bug in the original versio
That’s good to know.
-Original Message-
From: Martin Sivak [mailto:msi...@redhat.com]
Sent: Wednesday, May 23, 2018 12:58 AM
To: femi adegoke
Cc: users
Subject: [ovirt-users] Re: Hosted Engine w Gluster - increase number of hosts
Hi,
we recommend up to 7 HE hosts, it is not important
On Wed, May 23, 2018 at 6:06 AM, Eitan Raviv wrote:
> If the engine manages to 'reboot' the host as you say, it seems that
> the engine can communicate with the host.
>
> So it might be that you have a bit of a chicken and egg problem: the
> host is missing a required network and therefore goes b
Hello Ondra,
you're correct, there was much accept removing 'connection: local' line
from ovirt ansible roles.
however, the example playbook to deploy new vm fails at template option and
it complains that i don't have rhel7 template. Doesn't this come bundled
with hosted-engine and is available af
this has worked, many thanks for helping.
On 18 May 2018 at 09:47, Sumit Bharadia <03ce...@gmail.com> wrote:
> thanks, will give it a try and report back.
>
> On 18 May 2018 at 09:45, Simone Tiraboschi wrote:
>
>>
>>
>> On Fri, May 18, 2018 at 10:30 AM, Sumit Bharadia <03ce...@gmail.com>
>> wrot
Do you see this disk on engine side? it should be aware of this disk since
> it created
> the disk during live storage migration.
>
> Also, we should not have leftovers volumes after failed operations. Please
> file a bug
> for this and attach both engine.log and vdsm.log on the host doing the
> li
If the old setup is working, I would keep it, and manually update the
provider and openvswitch (yum update ...).
In the future 4.2 I hope the feature of re-using an existing provider will
already be there.
The setup is asking for user and password because we do not store these
values across invoca
Hi Shirly,
I went through your instructions just yesterday and they work but some
troubleshooting was needed. This is what I have found:
* When adding the graph I also got syntax errors: '*pq: syntax error at or
near "$"'*, maybe add an "ignore this error" line to the docs would be an
improvement
On Wed, May 23, 2018 at 10:04 AM, Marcin Mirecki
wrote:
> Hi Gianluca,
>
> The provider in version 4.1 was installed automatically, but it did not
> save the fact of being installed.
> Hence if you try to install it in 4.2, it will try to install itself again
> (and this time it will save the inf
Hi Gianluca,
The provider in version 4.1 was installed automatically, but it did not
save the fact of being installed.
Hence if you try to install it in 4.2, it will try to install itself again
(and this time it will save the info of being installed).
I'm planning to add a feature that will allow
Martin, thank you.
7 is perfect, since my 2 SuperMicro servers are 4-node 2U server's.
I am using nodes, so, I will add 4 HE nodes.
This is all for testing, no production.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le
Hi,
we recommend up to 7 HE hosts, it is not important if the number is
odd or even. The real implementation limit is much higher and you
won't reach it. But since we do not test more than 7 as part of the QE
process, we can't recommend it.
Best regards
Martin Sivak
On Wed, May 23, 2018 at 9:43
> On Wed, May 23, 2018 at 8:47 AM, femi adegoke wrote:
>
>
> Additional hosts should be directly added from the engine.
How many host should I add per best practice.
I have 3 now, do I add 2 or 4 more.
Should the total number of host be odd or even?
__
On Wed, May 23, 2018 at 8:47 AM, femi adegoke
wrote:
> Still looking for answers?
>
> What's the proper process to add more hosts using the Cockpit hosted
> engine wizard?
>
Additional hosts should be directly added from the engine.
> ___
> Users mai
On Tue, May 22, 2018 at 5:50 PM, Gianluca Cecchi
wrote:
> On Tue, May 22, 2018 at 5:35 PM, Simone Tiraboschi
> wrote:
>
>>
>>
>> On Tue, May 22, 2018 at 5:27 PM, Simone Tiraboschi
>> wrote:
>>
>>> Hi,
>>> Adding also Marcin here.
>>> I reproduced it as well and I can confirm that the external p
> Question: must the node be in maint mode before engine is backed up?
only for restore AFAIK
On Wed, May 23, 2018 at 3:28 AM, femi adegoke
wrote:
> Reading this: https://www.ovirt.org/documentation/self-hosted/
> chap-Backing_up_and_Restoring_an_EL-Based_Self-Hosted_Environment/
> It says the
40 matches
Mail list logo