Re: [ovirt-users] Network Interface order changed after reboot

2016-06-26 Thread Dan Kenigsberg
On Sun, Jun 26, 2016 at 03:59:31PM +0300, Yedidyah Bar David wrote: > On Sun, Jun 26, 2016 at 3:51 PM, Edward Haas wrote: > > > > > > On Thu, Jun 23, 2016 at 3:49 PM, wrote: > >> > >> Hi List, > >> > >> I have two nodes (running CentOS 7) and the network interface order > >> changed for some inte

Re: [ovirt-users] InClusterUpgrade Scheduling Policy

2016-06-26 Thread Roman Mohr
On Fri, Jun 24, 2016 at 6:34 PM, Scott wrote: > Actually, I figured out a work around. I changed the HostedEngine VM's > vds_group_id in the database to the vds_group_id of my temporary cluster > (found from the vds_groups table). This worked and I could put my main > cluster in upgrade mode. Now

Re: [ovirt-users] Network redundancy with Manual balancing per VLAN

2016-06-26 Thread Edward Haas
On Sun, Jun 26, 2016 at 4:37 PM, Yevgeny Zaspitsky wrote: > Dan, Edy, > > Could you guys answer this? > > IIUC, the requirements are: > >- stream the traffic of few VLANs(network roles) through a single bond >- be able to bind a VLAN to a bond slave with an option of fallback >- have

Re: [ovirt-users] vm pauses with "vm has paused due to unknown storage error

2016-06-26 Thread Krutika Dhananjay
Hi Bill, After glusterfs 3.7.11, around 4-5 bugs were found in sharding and replicate modules and fixed, some of them causing the VM(s) to pause. Could you share the glusterfs client logs from around the time the issue was seen? This will help me confirm it's the same issue, or even debug further

Re: [ovirt-users] oVirt 3.6 to 4.0 Upgrade

2016-06-26 Thread Brett I. Holcomb
Yes, that makes sense. Thanks. On 06/26/2016 10:00 AM, Christophe TREFOIS wrote: Hi, For CentOS 7, I set the host in global maintenance, and then upgrade the engine. After that, reboot cleanly the engine and set the maintenance back to none. Then you should update the host itself. To

Re: [ovirt-users] 3.6 to 4.0 upgrade cert issue

2016-06-26 Thread Matt Haught
On Fri, Jun 24, 2016 at 2:58 PM, Martin Perina wrote: > > > This is not a correct solution although it's working for now. Correct steps > are described at [1]. > > Thanks > > Martin Perina > > [1] https://bugzilla.redhat.com/show_bug.cgi?id=1336838 > So I followed the bug report and put my CA ce

Re: [ovirt-users] oVirt 3.6 to 4.0 Upgrade

2016-06-26 Thread Brett I. Holcomb
Centos 7.2 On 06/26/2016 08:43 AM, Yaniv Dary wrote: What OS are you running the engine on? Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem Road Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9) 7692306 8272306 Email: yd...@redhat.com

Re: [ovirt-users] oVirt and Ceph

2016-06-26 Thread Kevin Hrpcek
Hello Charles, The solution I came up with to solve this problem was to use RDO. I have oVirt engine running on dedicated hardware. The best way to have oVirt engine and RDO running on the same hardware is to build a VM on the same hardware as the engine with virt manager or virsh using the local

Re: [ovirt-users] Maintenance and hosted engine issue with Ovirt 4.0

2016-06-26 Thread Yaniv Dary
Please open bug with logs. Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem Road Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9) 7692306 8272306 Email: yd...@redhat.com IRC : ydary On Sun, Jun 26, 2016 at 6:17 PM, Bertrand Caplet wrote: > Hi there, >

Re: [ovirt-users] Network Interface order changed after reboot

2016-06-26 Thread ovirt
No I just eth0 was configured during OS installation. All other interface have been configured through the oVirt GUI. Best regards Christoph Am 26.06.2016 um 16:08 schrieb Edward Haas: On Sun, Jun 26, 2016 at 4:48 PM, > wrote: Hi Edy, please find some conf

Re: [ovirt-users] Create a Virtual Disk failed

2016-06-26 Thread Dewey Du
the content attached above is ui.log, and there is no logs in server.log and engine.log. I'm using oVirt 3.6. Finally I found out I can create the disk from the edit page of the vm. On Sun, Jun 26, 2016 at 8:40 PM, Yaniv Dary wrote: > Adding Tal. > What version are you using? Can you attach log

[ovirt-users] Maintenance and hosted engine issue with Ovirt 4.0

2016-06-26 Thread Bertrand Caplet
Hi there, I have hosted engine configured in my infrastructure and I just upgraded from Ovirt 3.6 to Ovirt 4.0 yesterday. Upgrade of hosted engine and my 2 nodes did ok. But now when I put one node in maintenance, it prepares for maintenance ; unset SPM if it was then migrate all the VMs to the an

Re: [ovirt-users] Network Interface order changed after reboot

2016-06-26 Thread Edward Haas
On Sun, Jun 26, 2016 at 4:48 PM, wrote: > Hi Edy, > > please find some config files below. I did the interface config only > through the oVirt GUI. > > I mean by reordering that after every reboot some interfaces are not the > same as before. That means I need to change the cables after reboot. >

Re: [ovirt-users] oVirt 3.6 to 4.0 Upgrade

2016-06-26 Thread Christophe TREFOIS
Hi, For CentOS 7, I set the host in global maintenance, and then upgrade the engine. After that, reboot cleanly the engine and set the maintenance back to none. Then you should update the host itself. To do that, you are strongly advised to shutdown the VMs first. If sanlock or vdsm g

Re: [ovirt-users] Network Interface order changed after reboot

2016-06-26 Thread ovirt
Hi Edy, please find some config files below. I did the interface config only through the oVirt GUI. I mean by reordering that after every reboot some interfaces are not the same as before. That means I need to change the cables after reboot. [root@lxedna ~]# cat /etc/sysconfig/network-scrip

Re: [ovirt-users] Network Interface order changed after reboot

2016-06-26 Thread ovirt
Hi, I'm using currently the following: But the problem is not new. ovirt-engine.noarch 3.6.6.2-1.el7.centos @ovirt-3.6 vdsm.noarch 4.17.28-1.el7 @centos-ovirt36 Best regards Christoph Am 26.06.2016 um 14:19 schrieb Yevgeny Zaspitsky: BTW, what o

Re: [ovirt-users] Network Interface order changed after reboot

2016-06-26 Thread ovirt
Hi Yevgeny, this are real machines. Best regards Christoph Am 26.06.2016 um 14:15 schrieb Yevgeny Zaspitsky: Christoph, Are those nodes bare-metal or they're VMs? Regards, Yevgeny On Thu, Jun 23, 2016 at 3:49 PM, > wrote: Hi List, I have two nodes (running

Re: [ovirt-users] Network redundancy with Manual balancing per VLAN

2016-06-26 Thread Yevgeny Zaspitsky
Dan, Edy, Could you guys answer this? IIUC, the requirements are: - stream the traffic of few VLANs(network roles) through a single bond - be able to bind a VLAN to a bond slave with an option of fallback - have redundancy - assign different QoS to every VLAN (my addition) I guess t

Re: [ovirt-users] Network Interface order changed after reboot

2016-06-26 Thread Yedidyah Bar David
On Sun, Jun 26, 2016 at 3:51 PM, Edward Haas wrote: > > > On Thu, Jun 23, 2016 at 3:49 PM, wrote: >> >> Hi List, >> >> I have two nodes (running CentOS 7) and the network interface order >> changed for some interfaces after every reboot. >> >> The configurations are done through the oVirt GUI. So

Re: [ovirt-users] Network Interface order changed after reboot

2016-06-26 Thread Edward Haas
On Thu, Jun 23, 2016 at 3:49 PM, wrote: > Hi List, > > I have two nodes (running CentOS 7) and the network interface order > changed for some interfaces after every reboot. > > The configurations are done through the oVirt GUI. So the ifcfg-ethX > scripts are configured automatically by VDSM. > >

Re: [ovirt-users] oVirt and Ceph

2016-06-26 Thread Yaniv Dary
Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem Road Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9) 7692306 8272306 Email: yd...@redhat.com IRC : ydary On Sun, Jun 26, 2016 at 11:49 AM, Nicolás wrote: > Hi Nir, > > El 25/06/16 a las 22:57, Nir Soffe

Re: [ovirt-users] oVirt 3.6 to 4.0 Upgrade

2016-06-26 Thread Yaniv Dary
What OS are you running the engine on? Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem Road Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9) 7692306 8272306 Email: yd...@redhat.com IRC : ydary On Sun, Jun 26, 2016 at 7:54 AM, Brett I. Holcomb wrote:

Re: [ovirt-users] Accessing VM over WAN

2016-06-26 Thread Yaniv Dary
I would ask this in the spice mailing lists. Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem Road Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9) 7692306 8272306 Email: yd...@redhat.com IRC : ydary On Sun, Jun 26, 2016 at 7:06 AM, RK RK wrote: > Hi,

Re: [ovirt-users] Create a Virtual Disk failed

2016-06-26 Thread Yaniv Dary
Adding Tal. What version are you using? Can you attach logs? Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem Road Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9) 7692306 8272306 Email: yd...@redhat.com IRC : ydary On Sat, Jun 25, 2016 at 12:26 PM, Dew

Re: [ovirt-users] direct mounting of vm disks?

2016-06-26 Thread Scott
Hi Robert, I've modified disk images for oVirt virtual machines before. I mostly run servers so they all use preallocated as opposed to thin provisioned disks. I'm not sure if that matters, but it means my VM disk images are raw files (as opposed to qcow). Therefore, I used something like the fo

Re: [ovirt-users] Network Interface order changed after reboot

2016-06-26 Thread Yevgeny Zaspitsky
BTW, what oVirt (vdsm&engine) version do you use? On Sun, Jun 26, 2016 at 3:15 PM, Yevgeny Zaspitsky wrote: > Christoph, > > Are those nodes bare-metal or they're VMs? > > Regards, > Yevgeny > > On Thu, Jun 23, 2016 at 3:49 PM, wrote: > >> Hi List, >> >> I have two nodes (running CentOS 7) and

Re: [ovirt-users] Network Interface order changed after reboot

2016-06-26 Thread Yevgeny Zaspitsky
Christoph, Are those nodes bare-metal or they're VMs? Regards, Yevgeny On Thu, Jun 23, 2016 at 3:49 PM, wrote: > Hi List, > > I have two nodes (running CentOS 7) and the network interface order > changed for some interfaces after every reboot. > > The configurations are done through the oVirt

Re: [ovirt-users] latest CentOS libvirt updates safe?

2016-06-26 Thread Christophe TREFOIS
This is how I upgrade. Works. Dr Christophe Trefois, Dipl.-Ing. Technical Specialist / Post-Doc UNIVERSITÉ DU LUXEMBOURG LUXEMBOURG CENTRE FOR SYSTEMS BIOMEDICINE Campus Belval | House of Biomedicine 6, avenue du Swing L-4367 Belvaux T: +352 46 66 44 6124 F: +352 46 66 44 6949 http://

Re: [ovirt-users] oVirt 4.0 Host install fail cause of dnf api

2016-06-26 Thread Yedidyah Bar David
On Sun, Jun 26, 2016 at 11:47 AM, Pilař Vojtěch wrote: > Thank you for confirming my thoughts. > > There is an easier way, than to use completely different build - i used > gerrit [1] repo and found the minidnf.py file, where the signture checking is > and simply removed it for the time being. >

Re: [ovirt-users] oVirt and Ceph

2016-06-26 Thread Nicolás
Hi Nir, El 25/06/16 a las 22:57, Nir Soffer escribió: On Sat, Jun 25, 2016 at 11:47 PM, Nicolás wrote: Hi, We're using Ceph along with an iSCSI gateway, so our storage domain is actually an iSCSI backend. So far, we have had zero issues with cca. 50 high IO rated VMs. Perhaps [1] might shed s

Re: [ovirt-users] oVirt 4.0 Host install fail cause of dnf api

2016-06-26 Thread Pilař Vojtěch
Thank you for confirming my thoughts. There is an easier way, than to use completely different build - i used gerrit [1] repo and found the minidnf.py file, where the signture checking is and simply removed it for the time being. If anyone is interested you can "fix" it in: /usr/lib/python2.7

Re: [ovirt-users] Failed to start self hosted engine after upgrading oVirt to 4.0

2016-06-26 Thread Dan Kenigsberg
On Fri, Jun 24, 2016 at 06:45:24PM +0200, Stefano Danzi wrote: > HI!! > > I found a workaround > > the brocker process try to connect to vdsm to IPV4 host address using an > IPV6 connection > (I noticed that doing a strace to the process), > but ipv6 is not intialized at boot.